X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e2012d1bd33ae33703da1c1648f35964472823be..a8561e356bd39b45e7ba4ae66e9ed6233b66a356:/armsrc/appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index 23540806..37328a50 100644
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -10,33 +10,41 @@
 // executes.
 //-----------------------------------------------------------------------------
 
+#include <stdarg.h>
+
 #include "usb_cdc.h"
 #include "cmd.h"
-
 #include "proxmark3.h"
 #include "apps.h"
+#include "fpga.h"
 #include "util.h"
 #include "printf.h"
 #include "string.h"
-
-#include <stdarg.h>
-
 #include "legicrf.h"
-#include <hitag2.h>
+#include "legicrfsim.h"
+#include "hitag2.h"
+#include "hitagS.h"
+#include "iso14443b.h"
+#include "iso15693.h"
 #include "lfsampling.h"
 #include "BigBuf.h"
 #include "mifareutil.h"
+#include "mifaresim.h"
+#include "pcf7931.h"
+#include "i2c.h"
+#include "hfsnoop.h"
+#include "fpgaloader.h"
 #ifdef WITH_LCD
  #include "LCD.h"
 #endif
 
+static uint32_t hw_capabilities;
+
 // Craig Young - 14a stand-alone code
-#ifdef WITH_ISO14443a_StandAlone
+#ifdef WITH_ISO14443a
  #include "iso14443a.h"
 #endif
 
-#define abs(x) ( ((x)<0) ? -(x) : (x) )
-
 //=============================================================================
 // A buffer where we can queue things up to be sent through the FPGA, for
 // any purpose (fake tag, as reader, whatever). We go MSB first, since that
@@ -137,35 +145,28 @@ void Dbhexdump(int len, uint8_t *d, bool bAsci) {
 // return that.
 //-----------------------------------------------------------------------------
 static int ReadAdc(int ch)
-{
-	uint32_t d;
-
-	AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
-	AT91C_BASE_ADC->ADC_MR =
-		ADC_MODE_PRESCALE(63  /* was 32 */) |							// ADC_CLK = MCK / ((63+1) * 2) = 48MHz / 128 = 375kHz
-		ADC_MODE_STARTUP_TIME(1  /* was 16 */) |						// Startup Time = (1+1) * 8 / ADC_CLK = 16 / 375kHz = 42,7us     Note: must be > 20us
-		ADC_MODE_SAMPLE_HOLD_TIME(15  /* was 8 */); 					// Sample & Hold Time SHTIM = 15 / ADC_CLK = 15 / 375kHz = 40us
-
+{	
 	// Note: ADC_MODE_PRESCALE and ADC_MODE_SAMPLE_HOLD_TIME are set to the maximum allowed value. 
-	// Both AMPL_LO and AMPL_HI are very high impedance (10MOhm) outputs, the input capacitance of the ADC is 12pF (typical). This results in a time constant
-	// of RC = 10MOhm * 12pF = 120us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged. 
+	// AMPL_HI is a high impedance (10MOhm || 1MOhm) output, the input capacitance of the ADC is 12pF (typical). This results in a time constant
+	// of RC = (0.91MOhm) * 12pF = 10.9us. Even after the maximum configurable sample&hold time of 40us the input capacitor will not be fully charged. 
 	// 
 	// The maths are:
 	// If there is a voltage v_in at the input, the voltage v_cap at the capacitor (this is what we are measuring) will be
 	//
-	//       v_cap = v_in * (1 - exp(-RC/SHTIM))  =   v_in * (1 - exp(-3))  =  v_in * 0,95                   (i.e. an error of 5%)
-	// 
-	// Note: with the "historic" values in the comments above, the error was 34%  !!!
-	
-	AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
+	//       v_cap = v_in * (1 - exp(-SHTIM/RC))  =   v_in * (1 - exp(-40us/10.9us))  =  v_in * 0,97                   (i.e. an error of 3%)
 
-	AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
+	AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
+	AT91C_BASE_ADC->ADC_MR =
+		ADC_MODE_PRESCALE(63) |							// ADC_CLK = MCK / ((63+1) * 2) = 48MHz / 128 = 375kHz
+		ADC_MODE_STARTUP_TIME(1) |						// Startup Time = (1+1) * 8 / ADC_CLK = 16 / 375kHz = 42,7us     Note: must be > 20us
+		ADC_MODE_SAMPLE_HOLD_TIME(15); 					// Sample & Hold Time SHTIM = 15 / ADC_CLK = 15 / 375kHz = 40us
 
-	while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch)))
-		;
-	d = AT91C_BASE_ADC->ADC_CDR[ch];
+	AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);
+	AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
 
-	return d;
+	while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch))) {};
+	
+	return AT91C_BASE_ADC->ADC_CDR[ch] & 0x3ff;
 }
 
 int AvgAdc(int ch) // was static - merlok
@@ -180,13 +181,29 @@ int AvgAdc(int ch) // was static - merlok
 	return (a + 15) >> 5;
 }
 
-void MeasureAntennaTuning(void)
+static int AvgAdc_Voltage_HF(void)
 {
-	uint8_t LF_Results[256];
-	int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0 
-	int vLf125 = 0, vLf134 = 0, vHf = 0;	// in mV
+	int AvgAdc_Voltage_Low, AvgAdc_Voltage_High;
+	
+	AvgAdc_Voltage_Low= (MAX_ADC_HF_VOLTAGE_LOW * AvgAdc(ADC_CHAN_HF_LOW)) >> 10;
+	// if voltage range is about to be exceeded, use high voltage ADC channel if available (RDV40 only)
+	if (AvgAdc_Voltage_Low > MAX_ADC_HF_VOLTAGE_LOW - 300) {
+		AvgAdc_Voltage_High = (MAX_ADC_HF_VOLTAGE_HIGH * AvgAdc(ADC_CHAN_HF_HIGH)) >> 10;
+		if (AvgAdc_Voltage_High >= AvgAdc_Voltage_Low) {
+			return AvgAdc_Voltage_High;
+		}
+	}
+	return AvgAdc_Voltage_Low;
+}
 
-	LED_B_ON();
+static int AvgAdc_Voltage_LF(void)
+{
+	return (MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10;
+}
+
+void MeasureAntennaTuningLfOnly(int *vLf125, int *vLf134, int *peakf, int *peakv, uint8_t LF_Results[])
+{
+	int i, adcval = 0, peak = 0;
 
 /*
  * Sweeps the useful LF range of the proxmark from
@@ -196,38 +213,68 @@ void MeasureAntennaTuning(void)
  * the resonating frequency of your LF antenna
  * ( hopefully around 95 if it is tuned to 125kHz!)
  */
-  
-  	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+	SpinDelay(50);
+	
 	for (i=255; i>=19; i--) {
-    WDT_HIT();
+		WDT_HIT();
 		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
 		SpinDelay(20);
-		adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10);
-		if (i==95) 	vLf125 = adcval; // voltage at 125Khz
-		if (i==89) 	vLf134 = adcval; // voltage at 134Khz
+		adcval = AvgAdc_Voltage_LF();
+		if (i==95) *vLf125 = adcval; // voltage at 125Khz
+		if (i==89) *vLf134 = adcval; // voltage at 134Khz
 
-		LF_Results[i] = adcval>>8; // scale int to fit in byte for graphing purposes
+		LF_Results[i] = adcval >> 9; // scale int to fit in byte for graphing purposes
 		if(LF_Results[i] > peak) {
-			peakv = adcval;
+			*peakv = adcval;
 			peak = LF_Results[i];
-			peakf = i;
+			*peakf = i;
 			//ptr = i;
 		}
 	}
 
 	for (i=18; i >= 0; i--) LF_Results[i] = 0;
-	
-	LED_A_ON();
+
+	return;
+}
+
+void MeasureAntennaTuningHfOnly(int *vHf)
+{
 	// Let the FPGA drive the high-frequency antenna around 13.56 MHz.
-  	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+	LED_A_ON();
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);
 	SpinDelay(20);
-	vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
+	*vHf = AvgAdc_Voltage_HF();
+	LED_A_OFF();
+	return;
+}
+
+void MeasureAntennaTuning(int mode)
+{
+	uint8_t LF_Results[256] = {0};
+	int peakv = 0, peakf = 0;
+	int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV
 
-	cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
+	LED_B_ON();
+
+	if (((mode & FLAG_TUNE_ALL) == FLAG_TUNE_ALL) && (FpgaGetCurrent() == FPGA_BITSTREAM_HF)) {
+		// Reverse "standard" order if HF already loaded, to avoid unnecessary swap.
+		MeasureAntennaTuningHfOnly(&vHf);
+		MeasureAntennaTuningLfOnly(&vLf125, &vLf134, &peakf, &peakv, LF_Results);
+	} else {
+		if (mode & FLAG_TUNE_LF) {
+			MeasureAntennaTuningLfOnly(&vLf125, &vLf134, &peakf, &peakv, LF_Results);
+		}
+		if (mode & FLAG_TUNE_HF) {
+			MeasureAntennaTuningHfOnly(&vHf);
+		}
+	}
+
+	cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125>>1 | (vLf134>>1<<16), vHf, peakf | (peakv>>1<<16), LF_Results, 256);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-	LED_A_OFF();
 	LED_B_OFF();
 	return;
 }
@@ -240,11 +287,11 @@ void MeasureAntennaTuningHf(void)
 
 	// Let the FPGA drive the high-frequency antenna around 13.56 MHz.
 	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER);
 
 	for (;;) {
-		SpinDelay(20);
-		vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
+		SpinDelay(500);
+		vHf = AvgAdc_Voltage_HF();
 
 		Dbprintf("%d mV",vHf);
 		if (BUTTON_PRESS()) break;
@@ -268,8 +315,24 @@ void ReadMem(int addr)
 extern struct version_information version_information;
 /* bootrom version information is pointed to from _bootphase1_version_pointer */
 extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;
+
+
+void set_hw_capabilities(void)
+{
+	if (I2C_is_available()) {
+		hw_capabilities |= HAS_SMARTCARD_SLOT;
+	}
+	
+	if (false) { // TODO: implement a test
+		hw_capabilities |= HAS_EXTRA_FLASH_MEM;
+	}
+}	
+
+
 void SendVersion(void)
 {
+	set_hw_capabilities();
+	
 	char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */
 	char VersionString[USB_CMD_DATA_SIZE] = { '\0' };
 
@@ -288,16 +351,53 @@ void SendVersion(void)
 	FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);
 	strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
 
-	FpgaGatherVersion(FPGA_BITSTREAM_LF, temp, sizeof(temp));
-	strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
-	FpgaGatherVersion(FPGA_BITSTREAM_HF, temp, sizeof(temp));
-	strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
-
+	for (int i = 0; i < fpga_bitstream_num; i++) {
+		strncat(VersionString, fpga_version_information[i], sizeof(VersionString) - strlen(VersionString) - 1);
+		strncat(VersionString, "\n", sizeof(VersionString) - strlen(VersionString) - 1);
+	}
+	
+	// test availability of SmartCard slot
+	if (I2C_is_available()) {
+		strncat(VersionString, "SmartCard Slot: available\n", sizeof(VersionString) - strlen(VersionString) - 1);
+	} else {
+		strncat(VersionString, "SmartCard Slot: not available\n", sizeof(VersionString) - strlen(VersionString) - 1);
+	}
+	
 	// Send Chip ID and used flash memory
 	uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;
 	uint32_t compressed_data_section_size = common_area.arg1;
-	cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, 0, VersionString, strlen(VersionString));
+	cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, hw_capabilities, VersionString, strlen(VersionString));
 }
+
+// measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
+// Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.
+void printUSBSpeed(void) 
+{
+	Dbprintf("USB Speed:");
+	Dbprintf("  Sending USB packets to client...");
+
+	#define USB_SPEED_TEST_MIN_TIME	1500	// in milliseconds
+	uint8_t *test_data = BigBuf_get_addr();
+	uint32_t end_time;
+
+	uint32_t start_time = end_time = GetTickCount();
+	uint32_t bytes_transferred = 0;
+	
+	LED_B_ON();
+	while(end_time < start_time + USB_SPEED_TEST_MIN_TIME) {
+		cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
+		end_time = GetTickCount();
+		bytes_transferred += USB_CMD_DATA_SIZE;
+	}
+	LED_B_OFF();
+
+	Dbprintf("  Time elapsed:      %dms", end_time - start_time);
+	Dbprintf("  Bytes transferred: %d", bytes_transferred);
+	Dbprintf("  USB Transfer Speed PM3 -> Client = %d Bytes/s", 
+		1000 * bytes_transferred / (end_time - start_time));
+
+}
+	
 /**
   * Prints runtime information about the PM3.
 **/
@@ -305,14 +405,20 @@ void SendStatus(void)
 {
 	BigBuf_print_status();
 	Fpga_print_status();
+#ifdef WITH_SMARTCARD
+	I2C_print_status();
+#endif
 	printConfig(); //LF Sampling config
+	printUSBSpeed();
 	Dbprintf("Various");
-	Dbprintf("  MF_DBGLEVEL......%d", MF_DBGLEVEL);
-	Dbprintf("  ToSendMax........%d",ToSendMax);
-	Dbprintf("  ToSendBit........%d",ToSendBit);
+	Dbprintf("  MF_DBGLEVEL........%d", MF_DBGLEVEL);
+	Dbprintf("  ToSendMax..........%d", ToSendMax);
+	Dbprintf("  ToSendBit..........%d", ToSendBit);
+
+	cmd_send(CMD_ACK,1,0,0,0,0);
 }
 
-#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF)
+#if defined(WITH_ISO14443a_StandAlone) || defined(WITH_LF_StandAlone)
 
 #define OPTS 2
 
@@ -343,11 +449,14 @@ void StandAloneMode14a()
 	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
 	int selected = 0;
-	int playing = 0;
-	int cardRead[OPTS] = {0};
+	bool playing = false, GotoRecord = false, GotoClone = false;
+	bool cardRead[OPTS] = {false};
 	uint8_t readUID[10] = {0};
 	uint32_t uid_1st[OPTS]={0};
 	uint32_t uid_2nd[OPTS]={0};
+	uint32_t uid_tmp1 = 0;
+	uint32_t uid_tmp2 = 0;
+	iso14a_card_select_t hi14a_card[OPTS];
 
 	LED(selected + 1, 0);
 
@@ -355,24 +464,17 @@ void StandAloneMode14a()
 	{
 		usb_poll();
 		WDT_HIT();
-
-		// Was our button held down or pressed?
-		int button_pressed = BUTTON_HELD(1000);
 		SpinDelay(300);
 
-		// Button was held for a second, begin recording
-		if (button_pressed > 0 && cardRead[selected] == 0)
+		if (GotoRecord || !cardRead[selected])
 		{
+			GotoRecord = false;
 			LEDsoff();
 			LED(selected + 1, 0);
 			LED(LED_RED2, 0);
 
 			// record
 			Dbprintf("Enabling iso14443a reader mode for [Bank: %u]...", selected);
-
-			// wait for button to be released
-			while(BUTTON_PRESS())
-				WDT_HIT();
 			/* need this delay to prevent catching some weird data */
 			SpinDelay(500);
 			/* Code for reading from 14a tag */
@@ -383,22 +485,54 @@ void StandAloneMode14a()
 			for ( ; ; )
 			{
 				WDT_HIT();
-				if (!iso14443a_select_card(uid, NULL, &cuid))
+				if (BUTTON_PRESS()) {
+					if (cardRead[selected]) {
+						Dbprintf("Button press detected -- replaying card in bank[%d]", selected);
+						break;
+					}
+					else if (cardRead[(selected+1)%OPTS]) {
+						Dbprintf("Button press detected but no card in bank[%d] so playing from bank[%d]", selected, (selected+1)%OPTS);
+						selected = (selected+1)%OPTS;
+						break;
+					}
+					else {
+						Dbprintf("Button press detected but no stored tag to play. (Ignoring button)");
+						SpinDelay(300);
+					}
+				}
+				if (!iso14443a_select_card(uid, &hi14a_card[selected], &cuid, true, 0, true))
 					continue;
 				else
 				{
 					Dbprintf("Read UID:"); Dbhexdump(10,uid,0);
 					memcpy(readUID,uid,10*sizeof(uint8_t));
-					uint8_t *dst = (uint8_t *)&uid_1st[selected];
+					uint8_t *dst = (uint8_t *)&uid_tmp1;
 					// Set UID byte order
 					for (int i=0; i<4; i++)
 						dst[i] = uid[3-i];
-					dst = (uint8_t *)&uid_2nd[selected];
+					dst = (uint8_t *)&uid_tmp2;
 					for (int i=0; i<4; i++)
 						dst[i] = uid[7-i];
-					break;
+					if (uid_1st[(selected+1)%OPTS] == uid_tmp1 && uid_2nd[(selected+1)%OPTS] == uid_tmp2) {
+						Dbprintf("Card selected has same UID as what is stored in the other bank. Skipping.");
+					}
+					else {
+						if (uid_tmp2) {
+							Dbprintf("Bank[%d] received a 7-byte UID",selected);
+							uid_1st[selected] = (uid_tmp1)>>8;
+							uid_2nd[selected] = (uid_tmp1<<24) + (uid_tmp2>>8);
+						}
+						else {
+							Dbprintf("Bank[%d] received a 4-byte UID",selected);
+							uid_1st[selected] = uid_tmp1;
+							uid_2nd[selected] = uid_tmp2;
+						}
+						break;
+					}
 				}
 			}
+			Dbprintf("ATQA = %02X%02X",hi14a_card[selected].atqa[0],hi14a_card[selected].atqa[1]);
+			Dbprintf("SAK = %02X",hi14a_card[selected].sak);
 			LEDsoff();
 			LED(LED_GREEN,  200);
 			LED(LED_ORANGE, 200);
@@ -407,139 +541,159 @@ void StandAloneMode14a()
 
 			LEDsoff();
 			LED(selected + 1, 0);
-			// Finished recording
-
-			// If we were previously playing, set playing off
-			// so next button push begins playing what we recorded
-			playing = 0;
 
-			cardRead[selected] = 1;
+			// Next state is replay:
+			playing = true;
 
+			cardRead[selected] = true;
 		}
-		/* MF UID clone */
-		else if (button_pressed > 0 && cardRead[selected] == 1)
+		/* MF Classic UID clone */
+		else if (GotoClone)
 		{
-					LEDsoff();
-					LED(selected + 1, 0);
-					LED(LED_ORANGE, 250);
-
+			GotoClone=false;
+			LEDsoff();
+			LED(selected + 1, 0);
+			LED(LED_ORANGE, 250);
 
-					// record
-					Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
 
-					// wait for button to be released
-					while(BUTTON_PRESS())
-					{
-						// Delay cloning until card is in place
-						WDT_HIT();
-					}
-					Dbprintf("Starting clone. [Bank: %u]", selected);
-					// need this delay to prevent catching some weird data
-					SpinDelay(500);
-					// Begin clone function here:
-					/* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
-							UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
-							memcpy(c.d.asBytes, data, 16);
-							SendCommand(&c);
-
-						Block read is similar:
-							UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
-						We need to imitate that call with blockNo 0 to set a uid.
-
-						The get and set commands are handled in this file:
-							// Work with "magic Chinese" card
-							case CMD_MIFARE_CSETBLOCK:
-									MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
-									break;
-							case CMD_MIFARE_CGETBLOCK:
-									MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
-													//
-									break;
-
-						mfCSetUID provides example logic for UID set workflow:
-							-Read block0 from card in field with MifareCGetBlock()
-							-Configure new values without replacing reserved bytes
-									memcpy(block0, uid, 4); // Copy UID bytes from byte array
-									// Mifare UID BCC
-									block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
-									Bytes 5-7 are reserved SAK and ATQA for mifare classic
-							-Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
-					*/
-					uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
-					// arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
-					MifareCGetBlock(0x1F, 1, 0, oldBlock0);
-					Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
-					memcpy(newBlock0,oldBlock0,16);
-					// Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
-
-					newBlock0[0] = uid_1st[selected]>>24;
-					newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
-					newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
-					newBlock0[3] = 0xFF & (uid_1st[selected]);
-					newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
-					// arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
-					MifareCSetBlock(0, 0xFF,0, newBlock0);
-					MifareCGetBlock(0x1F, 1, 0, testBlock0);
-					if (memcmp(testBlock0,newBlock0,16)==0)
-					{
-						DbpString("Cloned successfull!");
-						cardRead[selected] = 0; // Only if the card was cloned successfully should we clear it
-					}
-					LEDsoff();
-					LED(selected + 1, 0);
-					// Finished recording
+			// record
+			Dbprintf("Preparing to Clone card [Bank: %x]; uid: %08x", selected, uid_1st[selected]);
 
-					// If we were previously playing, set playing off
-					// so next button push begins playing what we recorded
-					playing = 0;
+			// wait for button to be released
+			while(BUTTON_PRESS())
+			{
+				// Delay cloning until card is in place
+				WDT_HIT();
+			}
+			Dbprintf("Starting clone. [Bank: %u]", selected);
+			// need this delay to prevent catching some weird data
+			SpinDelay(500);
+			// Begin clone function here:
+			/* Example from client/mifarehost.c for commanding a block write for "magic Chinese" cards:
+					UsbCommand c = {CMD_MIFARE_CSETBLOCK, {wantWipe, params & (0xFE | (uid == NULL ? 0:1)), blockNo}};
+					memcpy(c.d.asBytes, data, 16);
+					SendCommand(&c);
+
+					Block read is similar:
+					UsbCommand c = {CMD_MIFARE_CGETBLOCK, {params, 0, blockNo}};
+					We need to imitate that call with blockNo 0 to set a uid.
+
+					The get and set commands are handled in this file:
+					// Work with "magic Chinese" card
+					case CMD_MIFARE_CSETBLOCK:
+						MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+						break;
+					case CMD_MIFARE_CGETBLOCK:
+						MifareCGetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+						break;
+
+				mfCSetUID provides example logic for UID set workflow:
+					-Read block0 from card in field with MifareCGetBlock()
+					-Configure new values without replacing reserved bytes
+							memcpy(block0, uid, 4); // Copy UID bytes from byte array
+							// Mifare UID BCC
+							block0[4] = block0[0]^block0[1]^block0[2]^block0[3]; // BCC on byte 5
+							Bytes 5-7 are reserved SAK and ATQA for mifare classic
+					-Use mfCSetBlock(0, block0, oldUID, wantWipe, CSETBLOCK_SINGLE_OPER) to write it
+			*/
+			uint8_t oldBlock0[16] = {0}, newBlock0[16] = {0}, testBlock0[16] = {0};
+			// arg0 = Flags == CSETBLOCK_SINGLE_OPER=0x1F, arg1=returnSlot, arg2=blockNo
+			MifareCGetBlock(0x3F, 1, 0, oldBlock0);
+			if (oldBlock0[0] == 0 && oldBlock0[0] == oldBlock0[1]  && oldBlock0[1] == oldBlock0[2] && oldBlock0[2] == oldBlock0[3]) {
+				Dbprintf("No changeable tag detected. Returning to replay mode for bank[%d]", selected);
+				playing = true;
+			}
+			else {
+				Dbprintf("UID from target tag: %02X%02X%02X%02X", oldBlock0[0],oldBlock0[1],oldBlock0[2],oldBlock0[3]);
+				memcpy(newBlock0,oldBlock0,16);
+				// Copy uid_1st for bank (2nd is for longer UIDs not supported if classic)
+
+				newBlock0[0] = uid_1st[selected]>>24;
+				newBlock0[1] = 0xFF & (uid_1st[selected]>>16);
+				newBlock0[2] = 0xFF & (uid_1st[selected]>>8);
+				newBlock0[3] = 0xFF & (uid_1st[selected]);
+				newBlock0[4] = newBlock0[0]^newBlock0[1]^newBlock0[2]^newBlock0[3];
+				// arg0 = needWipe, arg1 = workFlags, arg2 = blockNo, datain
+				MifareCSetBlock(0, 0xFF,0, newBlock0);
+				MifareCGetBlock(0x3F, 1, 0, testBlock0);
+				if (memcmp(testBlock0,newBlock0,16)==0)
+				{
+					DbpString("Cloned successfull!");
+					cardRead[selected] = false; // Only if the card was cloned successfully should we clear it
+					playing = false;
+					GotoRecord = true;
+					selected = (selected+1) % OPTS;
+				}
+				else {
+					Dbprintf("Clone failed. Back to replay mode on bank[%d]", selected);
+					playing = true;
+				}
+			}
+			LEDsoff();
+			LED(selected + 1, 0);
 
 		}
 		// Change where to record (or begin playing)
-		else if (button_pressed && cardRead[selected])
+		else if (playing) // button_pressed == BUTTON_SINGLE_CLICK && cardRead[selected])
 		{
-			// Next option if we were previously playing
-			if (playing)
-				selected = (selected + 1) % OPTS;
-			playing = !playing;
-
 			LEDsoff();
 			LED(selected + 1, 0);
 
 			// Begin transmitting
-			if (playing)
-			{
-				LED(LED_GREEN, 0);
-				DbpString("Playing");
-				while (!BUTTON_HELD(500)) { // Loop simulating tag until the button is held a half-sec
-						Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected],uid_2nd[selected],selected);
-						SimulateIso14443aTag(1,uid_1st[selected],uid_2nd[selected],NULL);
+			LED(LED_GREEN, 0);
+			DbpString("Playing");
+			for ( ; ; ) {
+				WDT_HIT();
+				int button_action = BUTTON_HELD(1000);
+				if (button_action == 0) { // No button action, proceed with sim
+					uint8_t data[512] = {0}; // in case there is a read command received we shouldn't break
+					Dbprintf("Simulating ISO14443a tag with uid[0]: %08x, uid[1]: %08x [Bank: %u]", uid_1st[selected],uid_2nd[selected],selected);
+					if (hi14a_card[selected].sak == 8 && hi14a_card[selected].atqa[0] == 4 && hi14a_card[selected].atqa[1] == 0) {
+						DbpString("Mifare Classic");
+						SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data); // Mifare Classic
 					}
-				//cardRead[selected] = 1;
-				Dbprintf("Done playing [Bank: %u]",selected);
-
-				/* We pressed a button so ignore it here with a delay */
-				SpinDelay(300);
-
-				// when done, we're done playing, move to next option
-				selected = (selected + 1) % OPTS;
-				playing = !playing;
-				LEDsoff();
-				LED(selected + 1, 0);
+					else if (hi14a_card[selected].sak == 0 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 0) {
+						DbpString("Mifare Ultralight");
+						SimulateIso14443aTag(2,uid_1st[selected],uid_2nd[selected],data); // Mifare Ultralight
+					}
+					else if (hi14a_card[selected].sak == 20 && hi14a_card[selected].atqa[0] == 0x44 && hi14a_card[selected].atqa[1] == 3) {
+						DbpString("Mifare DESFire");
+						SimulateIso14443aTag(3,uid_1st[selected],uid_2nd[selected],data); // Mifare DESFire
+					}
+					else {
+						Dbprintf("Unrecognized tag type -- defaulting to Mifare Classic emulation");
+						SimulateIso14443aTag(1,uid_1st[selected], uid_2nd[selected], data);
+					}
+				}
+				else if (button_action == BUTTON_SINGLE_CLICK) {
+					selected = (selected + 1) % OPTS;
+					Dbprintf("Done playing. Switching to record mode on bank %d",selected);
+					GotoRecord = true;
+					break;
+				}
+				else if (button_action == BUTTON_HOLD) {
+					Dbprintf("Playtime over. Begin cloning...");
+					GotoClone = true;
+					break;
+				}
+				WDT_HIT();
 			}
-			else
-				while(BUTTON_PRESS())
-					WDT_HIT();
+
+			/* We pressed a button so ignore it here with a delay */
+			SpinDelay(300);
+			LEDsoff();
+			LED(selected + 1, 0);
 		}
 	}
 }
-#elif WITH_LF
+#elif WITH_LF_StandAlone
 // samy's sniff and repeat routine
 void SamyRun()
 {
 	StandAloneMode();
 	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 
-	int high[OPTS], low[OPTS];
+	int tops[OPTS], high[OPTS], low[OPTS];
 	int selected = 0;
 	int playing = 0;
 	int cardRead = 0;
@@ -573,8 +727,11 @@ void SamyRun()
 			/* need this delay to prevent catching some weird data */
 			SpinDelay(500);
 
-			CmdHIDdemodFSK(1, &high[selected], &low[selected], 0);
-			Dbprintf("Recorded %x %x %x", selected, high[selected], low[selected]);
+			CmdHIDdemodFSK(1, &tops[selected], &high[selected], &low[selected], 0);
+			if (tops[selected] > 0)
+				Dbprintf("Recorded %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
+			else
+				Dbprintf("Recorded %x %x%08x", selected, high[selected], low[selected]);
 
 			LEDsoff();
 			LED(selected + 1, 0);
@@ -595,7 +752,10 @@ void SamyRun()
 					LED(LED_ORANGE, 0);
 
 					// record
-					Dbprintf("Cloning %x %x %x", selected, high[selected], low[selected]);
+					if (tops[selected] > 0)
+						Dbprintf("Cloning %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
+					else
+						Dbprintf("Cloning %x %x%08x", selected, high[selected], low[selected]);
 
 					// wait for button to be released
 					while(BUTTON_PRESS())
@@ -604,8 +764,11 @@ void SamyRun()
 					/* need this delay to prevent catching some weird data */
 					SpinDelay(500);
 
-					CopyHIDtoT55x7(high[selected], low[selected], 0, 0);
-					Dbprintf("Cloned %x %x %x", selected, high[selected], low[selected]);
+					CopyHIDtoT55x7(tops[selected] & 0x000FFFFF, high[selected], low[selected], (tops[selected] != 0 && ((high[selected]& 0xFFFFFFC0) != 0)), 0x1D);
+					if (tops[selected] > 0)
+						Dbprintf("Cloned %x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
+					else
+						Dbprintf("Cloned %x %x%08x", selected, high[selected], low[selected]);
 
 					LEDsoff();
 					LED(selected + 1, 0);
@@ -638,8 +801,12 @@ void SamyRun()
 				// wait for button to be released
 				while(BUTTON_PRESS())
 					WDT_HIT();
-				Dbprintf("%x %x %x", selected, high[selected], low[selected]);
-				CmdHIDsimTAG(high[selected], low[selected], 0);
+				if (tops[selected] > 0)
+					Dbprintf("%x %x%08x%08x", selected, tops[selected], high[selected], low[selected]);
+				else
+					Dbprintf("%x %x%08x", selected, high[selected], low[selected]);
+				
+				CmdHIDsimTAG(tops[selected], high[selected], low[selected], 0);
 				DbpString("Done playing");
 				if (BUTTON_HELD(1000) > 0)
 					{
@@ -704,13 +871,15 @@ static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);
 
 void ListenReaderField(int limit)
 {
-	int lf_av, lf_av_new, lf_baseline= 0, lf_max;
-	int hf_av, hf_av_new,  hf_baseline= 0, hf_max;
+	int lf_av, lf_av_new=0, lf_baseline= 0, lf_max;
+	int hf_av, hf_av_new=0,  hf_baseline= 0, hf_max;
 	int mode=1, display_val, display_max, i;
 
-#define LF_ONLY						1
-#define HF_ONLY						2
-#define REPORT_CHANGE			 	10    // report new values only if they have changed at least by REPORT_CHANGE
+#define LF_ONLY                    1
+#define HF_ONLY                    2
+#define REPORT_CHANGE_PERCENT      5    // report new values only if they have changed at least by REPORT_CHANGE_PERCENT
+#define MIN_HF_FIELD             300    // in mode 1 signal HF field greater than MIN_HF_FIELD above baseline
+#define MIN_LF_FIELD            1200    // in mode 1 signal LF field greater than MIN_LF_FIELD above baseline
 
 
 	// switch off FPGA - we don't want to measure our own signal
@@ -719,23 +888,23 @@ void ListenReaderField(int limit)
 
 	LEDsoff();
 
-	lf_av = lf_max = AvgAdc(ADC_CHAN_LF);
+	lf_av = lf_max = AvgAdc_Voltage_LF();
 
 	if(limit != HF_ONLY) {
-		Dbprintf("LF 125/134kHz Baseline: %dmV", (MAX_ADC_LF_VOLTAGE * lf_av) >> 10);
+		Dbprintf("LF 125/134kHz Baseline: %dmV", lf_av);
 		lf_baseline = lf_av;
 	}
 
-	hf_av = hf_max = AvgAdc(ADC_CHAN_HF);
-
+	hf_av = hf_max = AvgAdc_Voltage_HF();
+	
 	if (limit != LF_ONLY) {
-		Dbprintf("HF 13.56MHz Baseline: %dmV", (MAX_ADC_HF_VOLTAGE * hf_av) >> 10);
+		Dbprintf("HF 13.56MHz Baseline: %dmV", hf_av);
 		hf_baseline = hf_av;
 	}
 
 	for(;;) {
+		SpinDelay(500);
 		if (BUTTON_PRESS()) {
-			SpinDelay(500);
 			switch (mode) {
 				case 1:
 					mode=2;
@@ -748,21 +917,22 @@ void ListenReaderField(int limit)
 					return;
 					break;
 			}
+			while (BUTTON_PRESS());
 		}
 		WDT_HIT();
 
 		if (limit != HF_ONLY) {
 			if(mode == 1) {
-				if (abs(lf_av - lf_baseline) > REPORT_CHANGE) 
+				if (lf_av - lf_baseline > MIN_LF_FIELD)
 					LED_D_ON();
 				else
 					LED_D_OFF();
 			}
 
-			lf_av_new = AvgAdc(ADC_CHAN_LF);
+			lf_av_new = AvgAdc_Voltage_LF();
 			// see if there's a significant change
-			if(abs(lf_av - lf_av_new) > REPORT_CHANGE) {
-				Dbprintf("LF 125/134kHz Field Change: %5dmV", (MAX_ADC_LF_VOLTAGE * lf_av_new) >> 10);
+			if (ABS((lf_av - lf_av_new)*100/(lf_av?lf_av:1)) > REPORT_CHANGE_PERCENT) {
+				Dbprintf("LF 125/134kHz Field Change: %5dmV", lf_av_new);
 				lf_av = lf_av_new;
 				if (lf_av > lf_max)
 					lf_max = lf_av;
@@ -771,16 +941,17 @@ void ListenReaderField(int limit)
 
 		if (limit != LF_ONLY) {
 			if (mode == 1){
-				if (abs(hf_av - hf_baseline) > REPORT_CHANGE) 	
+				if (hf_av - hf_baseline > MIN_HF_FIELD)
 					LED_B_ON();
 				else
 					LED_B_OFF();
 			}
 
-			hf_av_new = AvgAdc(ADC_CHAN_HF);
+			hf_av_new = AvgAdc_Voltage_HF();
+			
 			// see if there's a significant change
-			if(abs(hf_av - hf_av_new) > REPORT_CHANGE) {
-				Dbprintf("HF 13.56MHz Field Change: %5dmV", (MAX_ADC_HF_VOLTAGE * hf_av_new) >> 10);
+			if (ABS((hf_av - hf_av_new)*100/(hf_av?hf_av:1)) > REPORT_CHANGE_PERCENT) {
+				Dbprintf("HF 13.56MHz Field Change: %5dmV", hf_av_new);
 				hf_av = hf_av_new;
 				if (hf_av > hf_max)
 					hf_max = hf_av;
@@ -828,7 +999,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			setSamplingConfig((sample_config *) c->d.asBytes);
 			break;
 		case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
-			cmd_send(CMD_ACK,SampleLF(c->arg[0]),0,0,0,0);
+			cmd_send(CMD_ACK,SampleLF(c->arg[0], c->arg[1]),0,0,0,0);
 			break;
 		case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
 			ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
@@ -837,10 +1008,10 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			cmd_send(CMD_ACK,SnoopLF(),0,0,0,0);
 			break;
 		case CMD_HID_DEMOD_FSK:
-			CmdHIDdemodFSK(c->arg[0], 0, 0, 1);
+			CmdHIDdemodFSK(c->arg[0], 0, 0, 0, 1);
 			break;
 		case CMD_HID_SIM_TAG:
-			CmdHIDsimTAG(c->arg[0], c->arg[1], 1);
+			CmdHIDsimTAG(c->arg[0], c->arg[1], c->arg[2], 1);
 			break;
 		case CMD_FSK_SIM_TAG:
 			CmdFSKsimTAG(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
@@ -852,13 +1023,17 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			CmdPSKsimTag(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
 			break;
 		case CMD_HID_CLONE_TAG:
-			CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
+			CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0], 0x1D);
+			break;
+		case CMD_PARADOX_CLONE_TAG:
+			// Paradox cards are the same as HID, with a different preamble, so we can reuse the same function
+			CopyHIDtoT55x7(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0], 0x0F);
 			break;
 		case CMD_IO_DEMOD_FSK:
 			CmdIOdemodFSK(c->arg[0], 0, 0, 1);
 			break;
 		case CMD_IO_CLONE_TAG:
-			CopyIOtoT55x7(c->arg[0], c->arg[1], c->d.asBytes[0]);
+			CopyIOtoT55x7(c->arg[0], c->arg[1]);
 			break;
 		case CMD_EM410X_DEMOD:
 			CmdEM410xdemod(c->arg[0], 0, 0, 1);
@@ -887,28 +1062,41 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			CopyIndala224toT55x7(c->d.asDwords[0], c->d.asDwords[1], c->d.asDwords[2], c->d.asDwords[3], c->d.asDwords[4], c->d.asDwords[5], c->d.asDwords[6]);
 			break;
 		case CMD_T55XX_READ_BLOCK:
-			T55xxReadBlock(c->arg[1], c->arg[2],c->d.asBytes[0]);
+			T55xxReadBlock(c->arg[0], c->arg[1], c->arg[2]);
 			break;
 		case CMD_T55XX_WRITE_BLOCK:
 			T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
-			cmd_send(CMD_ACK,0,0,0,0,0);
 			break;
-		case CMD_T55XX_READ_TRACE:
-			T55xxReadTrace();
+		case CMD_T55XX_WAKEUP:
+			T55xxWakeUp(c->arg[0]);
+			break;
+		case CMD_T55XX_RESET_READ:
+			T55xxResetRead();
 			break;
 		case CMD_PCF7931_READ:
 			ReadPCF7931();
-			cmd_send(CMD_ACK,0,0,0,0,0);
+			break;
+		case CMD_PCF7931_WRITE:
+			WritePCF7931(c->d.asBytes[0],c->d.asBytes[1],c->d.asBytes[2],c->d.asBytes[3],c->d.asBytes[4],c->d.asBytes[5],c->d.asBytes[6], c->d.asBytes[9], c->d.asBytes[7]-128,c->d.asBytes[8]-128, c->arg[0], c->arg[1], c->arg[2]);
+			break;
+		case CMD_PCF7931_BRUTEFORCE:
+			BruteForcePCF7931(c->arg[0], (c->arg[1] & 0xFF), c->d.asBytes[9], c->d.asBytes[7]-128,c->d.asBytes[8]-128);
 			break;
 		case CMD_EM4X_READ_WORD:
-			EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]);
+			EM4xReadWord(c->arg[0], c->arg[1],c->arg[2]);
 			break;
 		case CMD_EM4X_WRITE_WORD:
-			EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
+			EM4xWriteWord(c->arg[0], c->arg[1], c->arg[2]);
 			break;
 		case CMD_AWID_DEMOD_FSK: // Set realtime AWID demodulation
 			CmdAWIDdemodFSK(c->arg[0], 0, 0, 1);
-                        break;
+			break;
+		case CMD_VIKING_CLONE_TAG:
+			CopyVikingtoT55xx(c->arg[0], c->arg[1], c->arg[2]);
+			break;
+		case CMD_COTAG:
+			Cotag(c->arg[0]);
+			break;
 #endif
 
 #ifdef WITH_HITAG
@@ -921,14 +1109,35 @@ void UsbPacketReceived(uint8_t *packet, int len)
 		case CMD_READER_HITAG: // Reader for Hitag tags, args = type and function
 			ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
 			break;
+		case CMD_SIMULATE_HITAG_S:// Simulate Hitag s tag, args = memory content
+			SimulateHitagSTag((bool)c->arg[0],(byte_t*)c->d.asBytes);
+			break;
+		case CMD_TEST_HITAGS_TRACES:// Tests every challenge within the given file
+			check_challenges_cmd((bool)c->arg[0], (byte_t*)c->d.asBytes, (uint8_t)c->arg[1]);
+			break;
+		case CMD_READ_HITAG_S://Reader for only Hitag S tags, args = key or challenge
+			ReadHitagSCmd((hitag_function)c->arg[0], (hitag_data*)c->d.asBytes, (uint8_t)c->arg[1], (uint8_t)c->arg[2], false);
+			break;
+		case CMD_READ_HITAG_S_BLK:
+			ReadHitagSCmd((hitag_function)c->arg[0], (hitag_data*)c->d.asBytes, (uint8_t)c->arg[1], (uint8_t)c->arg[2], true);
+			break;
+		case CMD_WR_HITAG_S://writer for Hitag tags args=data to write,page and key or challenge
+			if ((hitag_function)c->arg[0] < 10) {
+				WritePageHitagS((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes,c->arg[2]);
+			}
+			else if ((hitag_function)c->arg[0] >= 10) {
+			  WriterHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes, c->arg[2]);
+			}
+			break;
 #endif
 
 #ifdef WITH_ISO15693
 		case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
 			AcquireRawAdcSamplesIso15693();
 			break;
-		case CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693:
-			RecordRawAdcSamplesIso15693();
+			
+		case CMD_SNOOP_ISO_15693:
+			SnoopIso15693();
 			break;
 			
 		case CMD_ISO_15693_COMMAND:
@@ -953,7 +1162,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 
 #ifdef WITH_LEGICRF
 		case CMD_SIMULATE_TAG_LEGIC_RF:
-			LegicRfSimulate(c->arg[0], c->arg[1], c->arg[2]);
+			LegicRfSimulate(c->arg[0]);
 			break;
 
 		case CMD_WRITER_LEGIC_RF:
@@ -1031,6 +1240,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
 		case CMD_MIFAREU_WRITEBL:
 			MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
 			break;
+		case CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES:
+			MifareAcquireEncryptedNonces(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+			break;
 		case CMD_MIFARE_NESTED:
 			MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
 			break;
@@ -1038,7 +1250,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			MifareChkKeys(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
 			break;
 		case CMD_SIMULATE_MIFARE_CARD:
-			Mifare1ksim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+			MifareSim(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
 			break;
 		
 		// emulator
@@ -1059,6 +1271,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 			
 		// Work with "magic Chinese" card
+		case CMD_MIFARE_CWIPE:
+			MifareCWipe(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+			break;
 		case CMD_MIFARE_CSETBLOCK:
 			MifareCSetBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
 			break;
@@ -1088,11 +1303,64 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			ReaderIClass(c->arg[0]);
 			break;
 		case CMD_READER_ICLASS_REPLAY:
-		    ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+			ReaderIClass_Replay(c->arg[0], c->d.asBytes);
 			break;
-	case CMD_ICLASS_EML_MEMSET:
+		case CMD_ICLASS_EML_MEMSET:
 			emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
 			break;
+		case CMD_ICLASS_WRITEBLOCK:
+			iClass_WriteBlock(c->arg[0], c->d.asBytes);
+			break;
+		case CMD_ICLASS_READCHECK:  // auth step 1
+			iClass_ReadCheck(c->arg[0], c->arg[1]);
+			break;
+		case CMD_ICLASS_READBLOCK:
+			iClass_ReadBlk(c->arg[0]);
+			break;
+		case CMD_ICLASS_AUTHENTICATION: //check
+			iClass_Authentication(c->d.asBytes);
+			break;
+		case CMD_ICLASS_DUMP:
+			iClass_Dump(c->arg[0], c->arg[1]);
+			break;
+		case CMD_ICLASS_CLONE:
+			iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
+			break;
+#endif
+
+#ifdef WITH_HFSNOOP
+		case CMD_HF_SNIFFER:
+			HfSnoop(c->arg[0], c->arg[1]);
+			break;
+		case CMD_HF_PLOT:
+			HfPlot();
+			break;
+#endif
+
+#ifdef WITH_SMARTCARD
+		case CMD_SMART_ATR: {
+			SmartCardAtr();
+			break;
+		}
+		case CMD_SMART_SETCLOCK:{
+			SmartCardSetClock(c->arg[0]);
+			break;
+		}
+		case CMD_SMART_RAW: {
+			SmartCardRaw(c->arg[0], c->arg[1], c->d.asBytes);
+			break;
+		}
+		case CMD_SMART_UPLOAD: {
+			// upload file from client
+			uint8_t *mem = BigBuf_get_addr();
+			memcpy( mem + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
+			cmd_send(CMD_ACK,1,0,0,0,0);
+			break;
+		}
+		case CMD_SMART_UPGRADE: {
+			SmartCardUpgrade(c->arg[0]);
+			break;
+		}
 #endif
 
 		case CMD_BUFF_CLEAR:
@@ -1100,7 +1368,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 
 		case CMD_MEASURE_ANTENNA_TUNING:
-			MeasureAntennaTuning();
+			MeasureAntennaTuning(c->arg[0]);
 			break;
 
 		case CMD_MEASURE_ANTENNA_TUNING_HF:
@@ -1118,7 +1386,6 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 
 		case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K:
-
 			LED_B_ON();
 			uint8_t *BigBuf = BigBuf_get_addr();
 			for(size_t i=0; i<c->arg[1]; i += USB_CMD_DATA_SIZE) {
@@ -1131,6 +1398,15 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 
 		case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
+			// iceman; since changing fpga_bitstreams clears bigbuff, Its better to call it before.
+			// to be able to use this one for uploading data to device 
+			// arg1 = 0 upload for LF usage 
+			//        1 upload for HF usage
+			if (c->arg[1] == 0)
+				FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+			else
+				FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+
 			uint8_t *b = BigBuf_get_addr();
 			memcpy(b+c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE);
 			cmd_send(CMD_ACK,0,0,0,0,0);
@@ -1141,7 +1417,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 
 		case CMD_SET_LF_DIVISOR:
-		  	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+			FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 			FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->arg[0]);
 			break;
 
@@ -1216,13 +1492,10 @@ void  __attribute__((noreturn)) AppMain(void)
 	}
 	common_area.flags.osimage_present = 1;
 
-	LED_D_OFF();
-	LED_C_OFF();
-	LED_B_OFF();
-	LED_A_OFF();
-
+	LEDsoff();
+	
 	// Init USB device
-  usb_enable();
+	usb_enable();
 
 	// The FPGA gets its clock from us from PCK0 output, so set that up.
 	AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;
@@ -1230,7 +1503,7 @@ void  __attribute__((noreturn)) AppMain(void)
 	AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK0;
 	// PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz
 	AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK |
-		AT91C_PMC_PRES_CLK_4;
+		AT91C_PMC_PRES_CLK_4; //  4 for 24Mhz pck0, 2 for 48 MHZ pck0
 	AT91C_BASE_PIOA->PIO_OER = GPIO_PCK0;
 
 	// Reset SPI
@@ -1260,7 +1533,7 @@ void  __attribute__((noreturn)) AppMain(void)
     }
 		WDT_HIT();
 
-#ifdef WITH_LF
+#ifdef WITH_LF_StandAlone
 #ifndef WITH_ISO14443a_StandAlone
 		if (BUTTON_HELD(1000) > 0)
 			SamyRun();