X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e35031d2b73bb4c834d6675a5df870a2de14690c..52244230d318b663c5a389d57713e16139f0e069:/armsrc/mifarecmd.c?ds=sidebyside

diff --git a/armsrc/mifarecmd.c b/armsrc/mifarecmd.c
index 939c9002..6f57c113 100644
--- a/armsrc/mifarecmd.c
+++ b/armsrc/mifarecmd.c
@@ -14,12 +14,18 @@
 //-----------------------------------------------------------------------------
 
 #include "mifarecmd.h"
+
 #include "apps.h"
 #include "util.h"
+#include "parity.h"
 #include "crc.h"
 
+#define AUTHENTICATION_TIMEOUT 848			// card times out 1ms after wrong authentication (according to NXP documentation)
+#define PRE_AUTHENTICATION_LEADTIME 400		// some (non standard) cards need a pause after select before they are ready for first authentication 
+	
+
 // the block number for the ISO14443-4 PCB
-uint8_t pcb_blocknum = 0;
+static uint8_t pcb_blocknum = 0;
 // Deselect card by sending a s-block. the crc is precalced for speed
 static  uint8_t deselect_cmd[] = {0xc2,0xe0,0xb4};
 
@@ -44,16 +50,16 @@ void MifareReadBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	struct Crypto1State *pcs;
 	pcs = &mpcs;
 
-	// clear trace
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
 
 	while (true) {
-		if(!iso14443a_select_card(uid, NULL, &cuid)) {
+		if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 			if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");
 			break;
 		};
@@ -95,10 +101,12 @@ void MifareUC_Auth(uint8_t arg0, uint8_t *keybytes){
 	bool turnOffField = (arg0 == 1);
 
 	LED_A_ON(); LED_B_OFF(); LED_C_OFF();
-	clear_trace();
+
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
-	if(!iso14443a_select_card(NULL, NULL, NULL)) {
+	clear_trace();
+
+	if(!iso14443a_select_card(NULL, NULL, NULL, true, 0)) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");
 		OnError(0);
 		return;
@@ -129,10 +137,11 @@ void MifareUReadBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)
 
 	LEDsoff();
 	LED_A_ON();
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
-	int len = iso14443a_select_card(NULL, NULL, NULL);
+	clear_trace();
+
+	int len = iso14443a_select_card(NULL, NULL, NULL, true, 0);
 	if(!len) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%02X)",len);
 		OnError(1);
@@ -199,17 +208,16 @@ void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	struct Crypto1State *pcs;
 	pcs = &mpcs;
 
-	// clear trace
-	clear_trace();
-
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
 
 	isOK = 1;
-	if(!iso14443a_select_card(uid, NULL, &cuid)) {
+	if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 		isOK = 0;
 		if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");
 	}
@@ -252,6 +260,10 @@ void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 // datain = KEY bytes
 void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain)
 {
+	LEDsoff();
+	LED_A_ON();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
 	// free eventually allocated BigBuf memory
 	BigBuf_free();
 	clear_trace();
@@ -269,11 +281,7 @@ void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain)
 		return;
 	}
 
-	LEDsoff();
-	LED_A_ON();
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
-	int len = iso14443a_select_card(NULL, NULL, NULL);
+	int len = iso14443a_select_card(NULL, NULL, NULL, true, 0);
 	if (!len) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%d)",len);
 		OnError(1);
@@ -366,17 +374,16 @@ void MifareWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	struct Crypto1State *pcs;
 	pcs = &mpcs;
 
-	// clear trace
-	clear_trace();
-
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
 
 	while (true) {
-			if(!iso14443a_select_card(uid, NULL, &cuid)) {
+			if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 			if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");
 			break;
 		};
@@ -430,7 +437,7 @@ void MifareUWriteBlockCompat(uint8_t arg0, uint8_t *datain)
 	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
-	if(!iso14443a_select_card(uid, NULL, NULL)) {
+	if(!iso14443a_select_card(uid, NULL, NULL, true, 0)) {
 		if (MF_DBGLEVEL >= 1)   Dbprintf("Can't select card");
 		OnError(0);
 		return;
@@ -472,10 +479,11 @@ void MifareUWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)
 	
 	LEDsoff();
 	LED_A_ON();
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
-	if(!iso14443a_select_card(NULL, NULL, NULL)) {
+	clear_trace();
+
+	if(!iso14443a_select_card(NULL, NULL, NULL, true, 0)) {
 		if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");
 		OnError(0);
 		return;
@@ -530,10 +538,11 @@ void MifareUSetPwd(uint8_t arg0, uint8_t *datain){
 	memcpy(pwd, datain, 16);
 	
 	LED_A_ON(); LED_B_OFF(); LED_C_OFF();
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
-	if(!iso14443a_select_card(NULL, NULL, NULL)) {
+	clear_trace();
+
+	if(!iso14443a_select_card(NULL, NULL, NULL, true, 0)) {
 		if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");
 		OnError(0);
 		return;
@@ -592,9 +601,138 @@ void MifareUSetPwd(uint8_t arg0, uint8_t *datain){
 
 // Return 1 if the nonce is invalid else return 0
 int valid_nonce(uint32_t Nt, uint32_t NtEnc, uint32_t Ks1, uint8_t *parity) {
-	return ((oddparity((Nt >> 24) & 0xFF) == ((parity[0]) ^ oddparity((NtEnc >> 24) & 0xFF) ^ BIT(Ks1,16))) & \
-	(oddparity((Nt >> 16) & 0xFF) == ((parity[1]) ^ oddparity((NtEnc >> 16) & 0xFF) ^ BIT(Ks1,8))) & \
-	(oddparity((Nt >> 8) & 0xFF) == ((parity[2]) ^ oddparity((NtEnc >> 8) & 0xFF) ^ BIT(Ks1,0)))) ? 1 : 0;
+	return ((oddparity8((Nt >> 24) & 0xFF) == ((parity[0]) ^ oddparity8((NtEnc >> 24) & 0xFF) ^ BIT(Ks1,16))) & \
+	(oddparity8((Nt >> 16) & 0xFF) == ((parity[1]) ^ oddparity8((NtEnc >> 16) & 0xFF) ^ BIT(Ks1,8))) & \
+	(oddparity8((Nt >> 8) & 0xFF) == ((parity[2]) ^ oddparity8((NtEnc >> 8) & 0xFF) ^ BIT(Ks1,0)))) ? 1 : 0;
+}
+
+
+//-----------------------------------------------------------------------------
+// acquire encrypted nonces in order to perform the attack described in
+// Carlo Meijer, Roel Verdult, "Ciphertext-only Cryptanalysis on Hardened
+// Mifare Classic Cards" in Proceedings of the 22nd ACM SIGSAC Conference on 
+// Computer and Communications Security, 2015
+//-----------------------------------------------------------------------------
+void MifareAcquireEncryptedNonces(uint32_t arg0, uint32_t arg1, uint32_t flags, uint8_t *datain)
+{
+	uint64_t ui64Key = 0;
+	uint8_t uid[10];
+	uint32_t cuid;
+	uint8_t cascade_levels = 0;
+	struct Crypto1State mpcs = {0, 0};
+	struct Crypto1State *pcs;
+	pcs = &mpcs;
+	uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];
+	int16_t isOK = 0;
+	uint8_t par_enc[1];
+	uint8_t nt_par_enc = 0;
+	uint8_t buf[USB_CMD_DATA_SIZE];
+	uint32_t timeout;
+	
+	uint8_t blockNo = arg0 & 0xff;
+	uint8_t keyType = (arg0 >> 8) & 0xff;
+	uint8_t targetBlockNo = arg1 & 0xff;
+	uint8_t targetKeyType = (arg1 >> 8) & 0xff;
+	ui64Key = bytes_to_num(datain, 6);
+	bool initialize = flags & 0x0001;
+	bool slow = flags & 0x0002;
+	bool field_off = flags & 0x0004;
+	
+	LED_A_ON();
+	LED_C_OFF();
+
+	if (initialize) {
+		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+		clear_trace();
+		set_tracing(true);
+	}
+	
+	LED_C_ON();
+	
+	uint16_t num_nonces = 0;
+	bool have_uid = false;
+	for (uint16_t i = 0; i <= USB_CMD_DATA_SIZE - 9; ) {
+
+		// Test if the action was cancelled
+		if(BUTTON_PRESS()) {
+			isOK = 2;
+			field_off = true;
+			break;
+		}
+
+		if (!have_uid) { // need a full select cycle to get the uid first
+			iso14a_card_select_t card_info;		
+			if(!iso14443a_select_card(uid, &card_info, &cuid, true, 0)) {
+				if (MF_DBGLEVEL >= 1)	Dbprintf("AcquireNonces: Can't select card (ALL)");
+				continue;
+			}
+			switch (card_info.uidlen) {
+				case 4 : cascade_levels = 1; break;
+				case 7 : cascade_levels = 2; break;
+				case 10: cascade_levels = 3; break;
+				default: break;
+			}
+			have_uid = true;	
+		} else { // no need for anticollision. We can directly select the card
+			if(!iso14443a_select_card(uid, NULL, NULL, false, cascade_levels)) {
+				if (MF_DBGLEVEL >= 1)	Dbprintf("AcquireNonces: Can't select card (UID)");
+				continue;
+			}
+		}
+		
+		if (slow) {
+			timeout = GetCountSspClk() + PRE_AUTHENTICATION_LEADTIME;
+			while(GetCountSspClk() < timeout);
+		}
+
+		uint32_t nt1;
+		if (mifare_classic_authex(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST, &nt1, NULL)) {
+			if (MF_DBGLEVEL >= 1)	Dbprintf("AcquireNonces: Auth1 error");
+			continue;
+		}
+
+		// nested authentication
+		uint16_t len = mifare_sendcmd_short(pcs, AUTH_NESTED, 0x60 + (targetKeyType & 0x01), targetBlockNo, receivedAnswer, par_enc, NULL);
+		if (len != 4) {
+			if (MF_DBGLEVEL >= 1)	Dbprintf("AcquireNonces: Auth2 error len=%d", len);
+			continue;
+		}
+	
+		// send a dummy byte as reader response in order to trigger the cards authentication timeout
+		uint8_t dummy_answer = 0;
+		ReaderTransmit(&dummy_answer, 1, NULL);
+		timeout = GetCountSspClk() + AUTHENTICATION_TIMEOUT;
+		
+		num_nonces++;
+		if (num_nonces % 2) {
+			memcpy(buf+i, receivedAnswer, 4);
+			nt_par_enc = par_enc[0] & 0xf0;
+		} else {
+			nt_par_enc |= par_enc[0] >> 4;
+			memcpy(buf+i+4, receivedAnswer, 4);
+			memcpy(buf+i+8, &nt_par_enc, 1);
+			i += 9;
+		}
+
+		// wait for the card to become ready again
+		while(GetCountSspClk() < timeout);
+	
+	}
+
+	LED_C_OFF();
+	
+	crypto1_destroy(pcs);
+	
+	LED_B_ON();
+	cmd_send(CMD_ACK, isOK, cuid, num_nonces, buf, sizeof(buf));
+	LED_B_OFF();
+
+	if (MF_DBGLEVEL >= 3)	DbpString("AcquireEncryptedNonces finished");
+
+	if (field_off) {
+		FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+		LEDsoff();
+	}
 }
 
 
@@ -632,19 +770,20 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 	uint32_t auth1_time, auth2_time;
 	static uint16_t delta_time;
 
-	// free eventually allocated BigBuf memory
-	BigBuf_free();
-	// clear trace
-	clear_trace();
-	set_tracing(false);
-	
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
 	LED_A_ON();
 	LED_C_OFF();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	// free eventually allocated BigBuf memory
+	BigBuf_free();
 
+	if (calibrate) clear_trace();
+	set_tracing(true);
+	
 	// statistics on nonce distance
+	int16_t isOK = 0;
+	#define NESTED_MAX_TRIES 12
+	uint16_t unsuccessfull_tries = 0;
 	if (calibrate) {	// for first call only. Otherwise reuse previous calibration
 		LED_B_ON();
 		WDT_HIT();
@@ -655,6 +794,12 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 		
 		for (rtr = 0; rtr < 17; rtr++) {
 
+			// Test if the action was cancelled
+			if(BUTTON_PRESS()) {
+				isOK = -2;
+				break;
+			}
+
 			// prepare next select. No need to power down the card.
 			if(mifare_classic_halt(pcs, cuid)) {
 				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Halt error");
@@ -662,7 +807,7 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 				continue;
 			}
 
-			if(!iso14443a_select_card(uid, NULL, &cuid)) {
+			if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Can't select card");
 				rtr--;
 				continue;
@@ -702,14 +847,17 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 					delta_time = auth2_time - auth1_time + 32;  // allow some slack for proper timing
 				}
 				if (MF_DBGLEVEL >= 3) Dbprintf("Nested: calibrating... ntdist=%d", i);
+			} else {
+				unsuccessfull_tries++;
+				if (unsuccessfull_tries > NESTED_MAX_TRIES) {	// card isn't vulnerable to nested attack (random numbers are not predictable)
+					isOK = -3;
+				}
 			}
 		}
-		
-		if (rtr <= 1)	return;
 
 		davg = (davg + (rtr - 1)/2) / (rtr - 1);
 		
-		if (MF_DBGLEVEL >= 3) Dbprintf("min=%d max=%d avg=%d, delta_time=%d", dmin, dmax, davg, delta_time);
+		if (MF_DBGLEVEL >= 3) Dbprintf("rtr=%d isOK=%d min=%d max=%d avg=%d, delta_time=%d", rtr, isOK, dmin, dmax, davg, delta_time);
 
 		dmin = davg - 2;
 		dmax = davg + 2;
@@ -722,7 +870,7 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 	LED_C_ON();
 
 	//  get crypted nonces for target sector
-	for(i=0; i < 2; i++) { // look for exactly two different nonces
+	for(i=0; i < 2 && !isOK; i++) { // look for exactly two different nonces
 
 		target_nt[i] = 0;
 		while(target_nt[i] == 0) { // continue until we have an unambiguous nonce
@@ -733,7 +881,7 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 				continue;
 			}
 
-			if(!iso14443a_select_card(uid, NULL, &cuid)) {
+			if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 				if (MF_DBGLEVEL >= 1)	Dbprintf("Nested: Can't select card");
 				continue;
 			};
@@ -757,7 +905,7 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 			
 			// Parity validity check
 			for (j = 0; j < 4; j++) {
-				par_array[j] = (oddparity(receivedAnswer[j]) != ((par[0] >> (7-j)) & 0x01));
+				par_array[j] = (oddparity8(receivedAnswer[j]) != ((par[0] >> (7-j)) & 0x01));
 			}
 			
 			ncount = 0;
@@ -800,29 +948,30 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 	memcpy(buf+16, &target_ks[1], 4);
 	
 	LED_B_ON();
-	cmd_send(CMD_ACK, 0, 2, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));
+	cmd_send(CMD_ACK, isOK, 0, targetBlockNo + (targetKeyType * 0x100), buf, sizeof(buf));
 	LED_B_OFF();
 
 	if (MF_DBGLEVEL >= 3)	DbpString("NESTED FINISHED");
 
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	LEDsoff();
-	set_tracing(TRUE);
 }
 
 //-----------------------------------------------------------------------------
 // MIFARE check keys. key count up to 85. 
 // 
 //-----------------------------------------------------------------------------
-void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
+void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 {
-  // params
-	uint8_t blockNo = arg0;
-	uint8_t keyType = arg1;
+	uint8_t blockNo = arg0 & 0xff;
+	uint8_t keyType = (arg0 >> 8) & 0xff;
+	bool clearTrace = arg1;
 	uint8_t keyCount = arg2;
 	uint64_t ui64Key = 0;
 	
-	// variables
+	bool have_uid = false;
+	uint8_t cascade_levels = 0;
+	uint32_t timeout = 0;
 	int i;
 	byte_t isOK = 0;
 	uint8_t uid[10];
@@ -835,38 +984,57 @@ void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	int OLD_MF_DBGLEVEL = MF_DBGLEVEL;	
 	MF_DBGLEVEL = MF_DBG_NONE;
 	
-	// clear trace
-	clear_trace();
-	set_tracing(TRUE);
-
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
+	if (clearTrace) clear_trace();
+	set_tracing(true);
 
 	for (i = 0; i < keyCount; i++) {
-		if(mifare_classic_halt(pcs, cuid)) {
-			if (MF_DBGLEVEL >= 1)	Dbprintf("ChkKeys: Halt error");
+//		if(mifare_classic_halt(pcs, cuid)) {
+//			if (MF_DBGLEVEL >= 1)	Dbprintf("ChkKeys: Halt error");
+//		}
+
+		// Iceman: use piwi's faster nonce collecting part in hardnested.
+		if (!have_uid) { // need a full select cycle to get the uid first
+			iso14a_card_select_t card_info;		
+			if(!iso14443a_select_card(uid, &card_info, &cuid, true, 0)) {
+				if (OLD_MF_DBGLEVEL >= 1) 	Dbprintf("ChkKeys: Can't select card");
+				--i; // try same key once again
+				continue;
+			}
+			switch (card_info.uidlen) {
+				case 4 : cascade_levels = 1; break;
+				case 7 : cascade_levels = 2; break;
+				case 10: cascade_levels = 3; break;
+				default: break;
+			}
+			have_uid = true;	
+		} else { // no need for anticollision. We can directly select the card
+			if(!iso14443a_select_card(uid, NULL, NULL, false, cascade_levels)) {
+				if (OLD_MF_DBGLEVEL >= 1)	Dbprintf("ChkKeys: Can't select card (UID)");
+				--i; // try same key once again
+				continue;
+			}
 		}
 
-		if(!iso14443a_select_card(uid, NULL, &cuid)) {
-			if (OLD_MF_DBGLEVEL >= 1)	Dbprintf("ChkKeys: Can't select card");
-			break;
-		};
-
 		ui64Key = bytes_to_num(datain + i * 6, 6);
 		if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) {
+			uint8_t dummy_answer = 0;
+			ReaderTransmit(&dummy_answer, 1, NULL);
+			timeout = GetCountSspClk() + AUTHENTICATION_TIMEOUT;
+			
+			// wait for the card to become ready again
+			while(GetCountSspClk() < timeout);
 			continue;
-		};
+		}
 		
 		isOK = 1;
 		break;
 	}
 	
-	//  ----------------------------- crypto1 destroy
-	crypto1_destroy(pcs);
-	
 	LED_B_ON();
     cmd_send(CMD_ACK,isOK,0,0,datain + i * 6,6);
 	LED_B_OFF();
@@ -890,16 +1058,23 @@ void MifareSetDbgLvl(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 //-----------------------------------------------------------------------------
 // Work with emulator memory
 // 
+// Note: we call FpgaDownloadAndGo(FPGA_BITSTREAM_HF) here although FPGA is not
+// involved in dealing with emulator memory. But if it is called later, it might
+// destroy the Emulator Memory.
 //-----------------------------------------------------------------------------
+
 void MifareEMemClr(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 	emlClearMem();
 }
 
 void MifareEMemSet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 	emlSetMem(datain, arg0, arg1); // data, block num, blocks count
 }
 
 void MifareEMemGet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 	byte_t buf[USB_CMD_DATA_SIZE];
 	emlGetMem(buf, arg0, arg1); // data, block num, blocks count (max 4)
 
@@ -926,19 +1101,17 @@ void MifareECardLoad(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 	byte_t dataoutbuf2[16];
 	uint8_t uid[10];
 
-	// clear trace
-	clear_trace();
-	set_tracing(false);
-	
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+	
+	clear_trace();
+	set_tracing(false);
 	
 	bool isOK = true;
 
-	if(!iso14443a_select_card(uid, NULL, &cuid)) {
+	if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 		isOK = false;
 		if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");
 	}
@@ -1028,17 +1201,17 @@ void MifareCSetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 		LED_A_ON();
 		LED_B_OFF();
 		LED_C_OFF();
+		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 	
 		clear_trace();
-		set_tracing(TRUE);
-		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+		set_tracing(true);
 	}
 
 	while (true) {
 
 		// get UID from chip
 		if (workFlags & 0x01) {
-			if(!iso14443a_select_card(uid, NULL, &cuid)) {
+			if(!iso14443a_select_card(uid, NULL, &cuid, true, 0)) {
 				if (MF_DBGLEVEL >= 1)	Dbprintf("Can't select card");
 				break;
 			};
@@ -1127,6 +1300,7 @@ void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 	// bit 2 - need HALT after sequence
 	// bit 3 - need init FPGA and field before sequence
 	// bit 4 - need reset FPGA and LED
+	// bit 5 - need to set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
 	uint8_t workFlags = arg0;
 	uint8_t blockNo = arg2;
 	
@@ -1146,10 +1320,10 @@ void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 		LED_A_ON();
 		LED_B_OFF();
 		LED_C_OFF();
-	
-		clear_trace();
-		set_tracing(TRUE);
 		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
+		clear_trace();
+		set_tracing(true);
 	}
 
 	while (true) {
@@ -1186,7 +1360,12 @@ void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 	}
 	
 	LED_B_ON();
-	cmd_send(CMD_ACK,isOK,0,0,data,18);
+	if (workFlags & 0x20) {
+		if (isOK)
+			memcpy(datain, data, 18);
+	}
+	else
+		cmd_send(CMD_ACK,isOK,0,0,data,18);
 	LED_B_OFF();
 
 	if ((workFlags & 0x10) || (!isOK)) {
@@ -1224,7 +1403,7 @@ void MifareCIdent(){
 	cmd_send(CMD_ACK,isOK,0,0,0,0);
 }
 
-			//
+//
 // DESFIRE
 //
 
@@ -1234,10 +1413,10 @@ void Mifare_DES_Auth1(uint8_t arg0, uint8_t *datain){
 	uint8_t uid[10] = {0x00};
 	uint32_t cuid;
     
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+	clear_trace();
 
-	int len = iso14443a_select_card(uid, NULL, &cuid);
+	int len = iso14443a_select_card(uid, NULL, &cuid, true, 0);
 	if(!len) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");
 		OnError(1);