X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/f39198789b82c1dd545743778f9d2633a2af8bd8..e938f7101179641c9478e9c914bc1bb3ee171570:/client/fpga_compress.c?ds=sidebyside diff --git a/client/fpga_compress.c b/client/fpga_compress.c index db1ef81b..418a02b8 100644 --- a/client/fpga_compress.c +++ b/client/fpga_compress.c @@ -1,92 +1,172 @@ //----------------------------------------------------------------------------- +// piwi, 2017, 2018 +// // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of // the license. //----------------------------------------------------------------------------- -// Flasher frontend tool +// Compression tool for FPGA config files. Compress several *.bit files at +// compile time. Decompression is done at run time (see fpgaloader.c). +// This uses the zlib library tuned to this specific case. The small file sizes +// allow to use "insane" parameters for optimum compression ratio. //----------------------------------------------------------------------------- #include #include +#include #include #include +#include +#include "fpga.h" #include "zlib.h" #define MAX(a,b) ((a)>(b)?(a):(b)) // zlib configuration -#define COMPRESS_LEVEL 9 // use best possible compression +#define COMPRESS_LEVEL 9 // use best possible compression +#define COMPRESS_WINDOW_BITS 15 // default = max = 15 for a window of 2^15 = 32KBytes +#define COMPRESS_MEM_LEVEL 9 // determines the amount of memory allocated during compression. Default = 8. +/* COMPRESS_STRATEGY can be + Z_DEFAULT_STRATEGY (the default), + Z_FILTERED (more huffmann, less string matching), + Z_HUFFMAN_ONLY (huffman only, no string matching) + Z_RLE (distances limited to one) + Z_FIXED (prevents the use of dynamic Huffman codes) +*/ -#define FPGA_CONFIG_SIZE 42175 -static uint8_t fpga_config[FPGA_CONFIG_SIZE]; +#define COMPRESS_STRATEGY Z_DEFAULT_STRATEGY +// zlib tuning parameters: +#define COMPRESS_GOOD_LENGTH 258 +#define COMPRESS_MAX_LAZY 258 +#define COMPRESS_MAX_NICE_LENGTH 258 +#define COMPRESS_MAX_CHAIN 8192 -static void usage(char *argv0) +#define HARDNESTED_TABLE_SIZE (sizeof(uint32_t) * ((1L<<19)+1)) + +static void usage(void) { - fprintf(stderr, "Usage: %s \n\n", argv0); + fprintf(stdout, "Usage: fpga_compress ... \n"); + fprintf(stdout, " Combine n FPGA bitstream files and compress them into one.\n\n"); + fprintf(stdout, " fpga_compress -v ... \n"); + fprintf(stdout, " Extract Version Information from FPGA bitstream files and write it to \n\n"); + fprintf(stdout, " fpga_compress -d \n"); + fprintf(stdout, " Decompress . Write result to \n\n"); + fprintf(stdout, " fpga_compress -t \n"); + fprintf(stdout, " Compress hardnested table . Write result to \n\n"); } static voidpf fpga_deflate_malloc(voidpf opaque, uInt items, uInt size) { - fprintf(stderr, "zlib requested %d bytes\n", items*size); return malloc(items*size); } static void fpga_deflate_free(voidpf opaque, voidpf address) { - fprintf(stderr, "zlib frees memory\n"); - return free(address); + free(address); } -int zlib_compress(FILE *infile, FILE *outfile) +static bool all_feof(FILE *infile[], uint8_t num_infiles) { - int i, ret; - z_stream compressed_fpga_stream; + for (uint16_t i = 0; i < num_infiles; i++) { + if (!feof(infile[i])) { + return false; + } + } - // read the input file into fpga_config[] and count occurrences of each symbol: + return true; +} + + +int zlib_compress(FILE *infile[], uint8_t num_infiles, FILE *outfile, bool hardnested_mode) +{ + uint8_t *fpga_config; + uint32_t i; + int32_t ret; + uint8_t c; + z_stream compressed_fpga_stream; + + if (hardnested_mode) { + fpga_config = malloc(num_infiles * HARDNESTED_TABLE_SIZE); + } else { + fpga_config = malloc(num_infiles * FPGA_CONFIG_SIZE); + } + // read the input files. Interleave them into fpga_config[] i = 0; - while(!feof(infile)) { - uint8_t c; - c = fgetc(infile); - fpga_config[i++] = c; - if (i > FPGA_CONFIG_SIZE+1) { - fprintf(stderr, "Input file too big (> %d bytes). This is probably not a PM3 FPGA config file.", FPGA_CONFIG_SIZE); - fclose(infile); - fclose(outfile); - return -1; + do { + + if (i >= num_infiles * (hardnested_mode?HARDNESTED_TABLE_SIZE:FPGA_CONFIG_SIZE)) { + if (hardnested_mode) { + fprintf(stderr, "Input file too big (> %lu bytes). This is probably not a hardnested bitflip state table.\n", HARDNESTED_TABLE_SIZE); + } else { + fprintf(stderr, "Input files too big (total > %lu bytes). These are probably not PM3 FPGA config files.\n", num_infiles*FPGA_CONFIG_SIZE); + } + for(uint16_t j = 0; j < num_infiles; j++) { + fclose(infile[j]); + } + free(fpga_config); + return(EXIT_FAILURE); } - } + + for(uint16_t j = 0; j < num_infiles; j++) { + for(uint16_t k = 0; k < FPGA_INTERLEAVE_SIZE; k++) { + c = (uint8_t)fgetc(infile[j]); + if (!feof(infile[j])) { + fpga_config[i++] = c; + } else if (num_infiles > 1) { + fpga_config[i++] = '\0'; + } + } + } + + } while (!all_feof(infile, num_infiles)); // initialize zlib structures compressed_fpga_stream.next_in = fpga_config; compressed_fpga_stream.avail_in = i; compressed_fpga_stream.zalloc = fpga_deflate_malloc; compressed_fpga_stream.zfree = fpga_deflate_free; - + compressed_fpga_stream.opaque = Z_NULL; + ret = deflateInit2(&compressed_fpga_stream, + COMPRESS_LEVEL, + Z_DEFLATED, + COMPRESS_WINDOW_BITS, + COMPRESS_MEM_LEVEL, + COMPRESS_STRATEGY); + // estimate the size of the compressed output - unsigned int outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in); + uint32_t outsize_max = deflateBound(&compressed_fpga_stream, compressed_fpga_stream.avail_in); uint8_t *outbuf = malloc(outsize_max); compressed_fpga_stream.next_out = outbuf; compressed_fpga_stream.avail_out = outsize_max; - fprintf(stderr, "Allocated %d bytes for output file (estimated upper bound)\n", outsize_max); + + if (ret == Z_OK) { + ret = deflateTune(&compressed_fpga_stream, + COMPRESS_GOOD_LENGTH, + COMPRESS_MAX_LAZY, + COMPRESS_MAX_NICE_LENGTH, + COMPRESS_MAX_CHAIN); + } - ret = deflateInit(&compressed_fpga_stream, COMPRESS_LEVEL); - if (ret == Z_OK) { ret = deflate(&compressed_fpga_stream, Z_FINISH); } - fprintf(stderr, "produced %d bytes of output\n", compressed_fpga_stream.total_out); + fprintf(stdout, "compressed %u input bytes to %lu output bytes\n", i, compressed_fpga_stream.total_out); if (ret != Z_STREAM_END) { - fprintf(stderr, "Error in deflate(): %d %s\n", ret, compressed_fpga_stream.msg); + fprintf(stderr, "Error in deflate(): %i %s\n", ret, compressed_fpga_stream.msg); free(outbuf); deflateEnd(&compressed_fpga_stream); - fclose(infile); + for(uint16_t j = 0; j < num_infiles; j++) { + fclose(infile[j]); + } fclose(outfile); - return -1; + free(infile); + free(fpga_config); + return(EXIT_FAILURE); } for (i = 0; i < compressed_fpga_stream.total_out; i++) { @@ -95,40 +175,309 @@ int zlib_compress(FILE *infile, FILE *outfile) free(outbuf); deflateEnd(&compressed_fpga_stream); - fclose(infile); + for(uint16_t j = 0; j < num_infiles; j++) { + fclose(infile[j]); + } fclose(outfile); + free(infile); + free(fpga_config); + + return(EXIT_SUCCESS); + +} - return 0; + +int zlib_decompress(FILE *infile, FILE *outfile) +{ + #define DECOMPRESS_BUF_SIZE 1024 + uint8_t outbuf[DECOMPRESS_BUF_SIZE]; + uint8_t inbuf[DECOMPRESS_BUF_SIZE]; + int32_t ret; + + z_stream compressed_fpga_stream; + + // initialize zlib structures + compressed_fpga_stream.next_in = inbuf; + compressed_fpga_stream.avail_in = 0; + compressed_fpga_stream.next_out = outbuf; + compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE; + compressed_fpga_stream.zalloc = fpga_deflate_malloc; + compressed_fpga_stream.zfree = fpga_deflate_free; + compressed_fpga_stream.opaque = Z_NULL; + + ret = inflateInit2(&compressed_fpga_stream, 0); + + do { + if (compressed_fpga_stream.avail_in == 0) { + compressed_fpga_stream.next_in = inbuf; + uint16_t i = 0; + do { + int32_t c = fgetc(infile); + if (!feof(infile)) { + inbuf[i++] = c & 0xFF; + compressed_fpga_stream.avail_in++; + } else { + break; + } + } while (i < DECOMPRESS_BUF_SIZE); + } + + ret = inflate(&compressed_fpga_stream, Z_SYNC_FLUSH); + + if (ret != Z_OK && ret != Z_STREAM_END) { + break; + } + + if (compressed_fpga_stream.avail_out == 0) { + for (uint16_t i = 0; i < DECOMPRESS_BUF_SIZE; i++) { + fputc(outbuf[i], outfile); + } + compressed_fpga_stream.avail_out = DECOMPRESS_BUF_SIZE; + compressed_fpga_stream.next_out = outbuf; + } + } while (ret == Z_OK); + + if (ret == Z_STREAM_END) { // reached end of input + uint16_t i = 0; + while (compressed_fpga_stream.avail_out < DECOMPRESS_BUF_SIZE) { + fputc(outbuf[i++], outfile); + compressed_fpga_stream.avail_out++; + } + fclose(outfile); + fclose(infile); + return(EXIT_SUCCESS); + } else { + fprintf(stderr, "Error. Inflate() returned error %i, %s", ret, compressed_fpga_stream.msg); + fclose(outfile); + fclose(infile); + return(EXIT_FAILURE); + } + +} + + +/* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence + * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01 + * After that the format is 1 byte section type (ASCII character), 2 byte length + * (big endian), bytes content. Except for section 'e' which has 4 bytes + * length. + */ +static int bitparse_find_section(FILE *infile, char section_name, unsigned int *section_length) +{ + int result = 0; + #define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100 // maximum number of bytes to search for the requested section + uint16_t numbytes = 0; + while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) { + char current_name = (char)fgetc(infile); + numbytes++; + if(current_name < 'a' || current_name > 'e') { + /* Strange section name, abort */ + break; + } + unsigned int current_length = 0; + switch(current_name) { + case 'e': + /* Four byte length field */ + current_length += fgetc(infile) << 24; + current_length += fgetc(infile) << 16; + numbytes += 2; + default: /* Fall through, two byte length field */ + current_length += fgetc(infile) << 8; + current_length += fgetc(infile) << 0; + numbytes += 2; + } + + if(current_name != 'e' && current_length > 255) { + /* Maybe a parse error */ + break; + } + + if(current_name == section_name) { + /* Found it */ + *section_length = current_length; + result = 1; + break; + } + + for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) { + (void)fgetc(infile); + numbytes++; + } + } + + return result; +} + + +static int FpgaGatherVersion(FILE *infile, char* infile_name, char *dst, int len) +{ + unsigned int fpga_info_len; + char tempstr[40] = {0x00}; + dst[0] = '\0'; + + for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) { + if (fgetc(infile) != bitparse_fixed_header[i]) { + fprintf(stderr, "Invalid FPGA file. Aborting...\n\n"); + return(EXIT_FAILURE); + } + } + + strncat(dst, basename(infile_name), len-1); + // if (bitparse_find_section(infile, 'a', &fpga_info_len)) { + // for (uint16_t i = 0; i < fpga_info_len; i++) { + // char c = (char)fgetc(infile); + // if (i < sizeof(tempstr)) { + // tempstr[i] = c; + // } + // } + // strncat(dst, tempstr, len-1); + // } + strncat(dst, " built", len-1); + if (bitparse_find_section(infile, 'b', &fpga_info_len)) { + strncat(dst, " for ", len-1); + for (uint16_t i = 0; i < fpga_info_len; i++) { + char c = (char)fgetc(infile); + if (i < sizeof(tempstr)) { + tempstr[i] = c; + } + } + strncat(dst, tempstr, len-1); + } + if (bitparse_find_section(infile, 'c', &fpga_info_len)) { + strncat(dst, " on ", len-1); + for (uint16_t i = 0; i < fpga_info_len; i++) { + char c = (char)fgetc(infile); + if (i < sizeof(tempstr)) { + tempstr[i] = c; + } + } + strncat(dst, tempstr, len-1); + } + if (bitparse_find_section(infile, 'd', &fpga_info_len)) { + strncat(dst, " at ", len-1); + for (uint16_t i = 0; i < fpga_info_len; i++) { + char c = (char)fgetc(infile); + if (i < sizeof(tempstr)) { + tempstr[i] = c; + } + } + strncat(dst, tempstr, len-1); + } + return 0; +} + + +static void print_version_info_preamble(FILE *outfile, int num_infiles) { + fprintf(outfile, "//-----------------------------------------------------------------------------\n"); + fprintf(outfile, "// piwi, 2018\n"); + fprintf(outfile, "//\n"); + fprintf(outfile, "// This code is licensed to you under the terms of the GNU GPL, version 2 or,\n"); + fprintf(outfile, "// at your option, any later version. See the LICENSE.txt file for the text of\n"); + fprintf(outfile, "// the license.\n"); + fprintf(outfile, "//-----------------------------------------------------------------------------\n"); + fprintf(outfile, "// Version information on fpga images\n"); + fprintf(outfile, "//\n"); + fprintf(outfile, "// This file is generated by fpga_compress. Don't edit!\n"); + fprintf(outfile, "//-----------------------------------------------------------------------------\n"); + fprintf(outfile, "\n"); + fprintf(outfile, "\n"); + fprintf(outfile, "const int fpga_bitstream_num = %d;\n", num_infiles); + fprintf(outfile, "const char* const fpga_version_information[%d] = {\n", num_infiles); } +static int generate_fpga_version_info(FILE *infile[], char *infile_names[], int num_infiles, FILE *outfile) { + + char version_string[80] = ""; + + print_version_info_preamble(outfile, num_infiles); + + for (int i = 0; i < num_infiles; i++) { + FpgaGatherVersion(infile[i], infile_names[i], version_string, sizeof(version_string)); + fprintf(outfile, "\t\"%s\"", version_string); + if (i != num_infiles-1) { + fprintf(outfile, ","); + } + fprintf(outfile,"\n"); + } + + fprintf(outfile, "};\n"); + + return 0; +} + int main(int argc, char **argv) { - char *infilename; - char *outfilename; + FILE **infiles; + char **infile_names; + FILE *outfile; - if (argc != 3) { - usage(argv[0]); - return -1; - } else { - infilename = argv[1]; - outfilename = argv[2]; - } + if (argc == 1 || argc == 2) { + usage(); + return(EXIT_FAILURE); + } + + if (!strcmp(argv[1], "-d")) { // Decompress - FILE *infile = fopen(infilename, "rb"); - if (infile == NULL) { - fprintf(stderr, "Error. Cannot open input file %s", infilename); - return -1; + infiles = calloc(1, sizeof(FILE*)); + if (argc != 4) { + usage(); + return(EXIT_FAILURE); + } + infiles[0] = fopen(argv[2], "rb"); + if (infiles[0] == NULL) { + fprintf(stderr, "Error. Cannot open input file %s\n\n", argv[2]); + return(EXIT_FAILURE); } - - FILE *outfile = fopen(outfilename, "wb"); - if (outfile == NULL) { - fprintf(stderr, "Error. Cannot open output file %s", outfilename); - fclose(infile); - return -1; + outfile = fopen(argv[3], "wb"); + if (outfile == NULL) { + fprintf(stderr, "Error. Cannot open output file %s\n\n", argv[3]); + return(EXIT_FAILURE); } - - return zlib_compress(infile, outfile); + return zlib_decompress(infiles[0], outfile); + + } else { // Compress or gemerate version info + + bool hardnested_mode = false; + bool generate_version_file = false; + int num_input_files = 0; + if (!strcmp(argv[1], "-t")) { // compress one hardnested table + if (argc != 4) { + usage(); + return(EXIT_FAILURE); + } + hardnested_mode = true; + num_input_files = 1; + } else if (!strcmp(argv[1], "-v")) { // generate version info + generate_version_file = true; + num_input_files = argc-3; + } else { // compress 1..n fpga files + num_input_files = argc-2; + } + + infiles = calloc(num_input_files, sizeof(FILE*)); + infile_names = calloc(num_input_files, sizeof(char*)); + for (uint16_t i = 0; i < num_input_files; i++) { + infile_names[i] = argv[i+((hardnested_mode || generate_version_file)?2:1)]; + infiles[i] = fopen(infile_names[i], "rb"); + if (infiles[i] == NULL) { + fprintf(stderr, "Error. Cannot open input file %s\n\n", infile_names[i]); + return(EXIT_FAILURE); + } + } + outfile = fopen(argv[argc-1], "wb"); + if (outfile == NULL) { + fprintf(stderr, "Error. Cannot open output file %s\n\n", argv[argc-1]); + return(EXIT_FAILURE); + } + if (generate_version_file) { + if (generate_fpga_version_info(infiles, infile_names, num_input_files, outfile)) { + return(EXIT_FAILURE); + } + } else { + return zlib_compress(infiles, num_input_files, outfile, hardnested_mode); + } + } }