X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/f4bad97d92bf72dbb76f13c7fb7d2268129e01c3..9f52c9db288de1b5bbff0e4f6da644ad74bddd9b:/client/cmdlf.c diff --git a/client/cmdlf.c b/client/cmdlf.c index cf920b1e..399adb72 100644 --- a/client/cmdlf.c +++ b/client/cmdlf.c @@ -7,43 +7,178 @@ //----------------------------------------------------------------------------- // Low frequency commands //----------------------------------------------------------------------------- - -#include -#include -#include -#include -//#include "proxusb.h" -#include "proxmark3.h" -#include "data.h" -#include "graph.h" -#include "ui.h" -#include "cmdparser.h" -#include "cmdmain.h" -#include "cmddata.h" #include "cmdlf.h" -#include "cmdlfhid.h" -#include "cmdlfti.h" -#include "cmdlfem4x.h" -#include "cmdlfhitag.h" -#include "cmdlft55xx.h" -#include "cmdlfpcf7931.h" -#include "cmdlfio.h" - static int CmdHelp(const char *Cmd); -/* send a command before reading */ -int CmdLFCommandRead(const char *Cmd) -{ - static char dummy[3]; +int usage_lf_cmdread(void) { + PrintAndLog("Usage: lf cmdread d z o c [H]"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" L Low frequency (125 KHz)"); + PrintAndLog(" H High frequency (134 KHz)"); + PrintAndLog(" d delay OFF period, (decimal)"); + PrintAndLog(" z time period ZERO, (decimal)"); + PrintAndLog(" o time period ONE, (decimal)"); + PrintAndLog(" c Command bytes (in ones and zeros)"); + PrintAndLog(" ************* All periods in microseconds (ms)"); + PrintAndLog("Examples:"); + PrintAndLog(" lf cmdread d 80 z 100 o 200 c 11000"); + PrintAndLog(" lf cmdread d 80 z 100 o 100 c 11000 H"); + return 0; +} +int usage_lf_read(void){ + PrintAndLog("Usage: lf read [h] [s]"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" s silent run no printout"); + PrintAndLog("This function takes no arguments. "); + PrintAndLog("Use 'lf config' to set parameters."); + return 0; +} +int usage_lf_snoop(void) { + PrintAndLog("Usage: lf snoop"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog("This function takes no arguments. "); + PrintAndLog("Use 'lf config' to set parameters."); + return 0; +} +int usage_lf_config(void) { + PrintAndLog("Usage: lf config [h] [H|] [b ] [d ] [a 0|1]"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" L Low frequency (125 KHz)"); + PrintAndLog(" H High frequency (134 KHz)"); + PrintAndLog(" q Manually set divisor. 88-> 134KHz, 95-> 125 Hz"); + PrintAndLog(" b Sets resolution of bits per sample. Default (max): 8"); + PrintAndLog(" d Sets decimation. A value of N saves only 1 in N samples. Default: 1"); + PrintAndLog(" a [0|1] Averaging - if set, will average the stored sample value when decimating. Default: 1"); + PrintAndLog(" t Sets trigger threshold. 0 means no threshold (range: 0-128)"); + PrintAndLog("Examples:"); + PrintAndLog(" lf config b 8 L"); + PrintAndLog(" Samples at 125KHz, 8bps."); + PrintAndLog(" lf config H b 4 d 3"); + PrintAndLog(" Samples at 134KHz, averages three samples into one, stored with "); + PrintAndLog(" a resolution of 4 bits per sample."); + PrintAndLog(" lf read"); + PrintAndLog(" Performs a read (active field)"); + PrintAndLog(" lf snoop"); + PrintAndLog(" Performs a snoop (no active field)"); + return 0; +} +int usage_lf_simfsk(void) { + PrintAndLog("Usage: lf simfsk [c ] [i] [H ] [L ] [d ]"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" c Manually set clock - can autodetect if using DemodBuffer"); + PrintAndLog(" i invert data"); + PrintAndLog(" H Manually set the larger Field Clock"); + PrintAndLog(" L Manually set the smaller Field Clock"); + //PrintAndLog(" s TBD- -to enable a gap between playback repetitions - default: no gap"); + PrintAndLog(" d Data to sim as hex - omit to sim from DemodBuffer"); + PrintAndLog("\n NOTE: if you set one clock manually set them all manually"); + return 0; +} +int usage_lf_simask(void) { + PrintAndLog("Usage: lf simask [c ] [i] [b|m|r] [s] [d ]"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" c Manually set clock - can autodetect if using DemodBuffer"); + PrintAndLog(" i invert data"); + PrintAndLog(" b sim ask/biphase"); + PrintAndLog(" m sim ask/manchester - Default"); + PrintAndLog(" r sim ask/raw"); + PrintAndLog(" s add t55xx Sequence Terminator gap - default: no gaps (only manchester)"); + PrintAndLog(" d Data to sim as hex - omit to sim from DemodBuffer"); + return 0; +} +int usage_lf_simpsk(void) { + PrintAndLog("Usage: lf simpsk [1|2|3] [c ] [i] [r ] [d ]"); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" c Manually set clock - can autodetect if using DemodBuffer"); + PrintAndLog(" i invert data"); + PrintAndLog(" 1 set PSK1 (default)"); + PrintAndLog(" 2 set PSK2"); + PrintAndLog(" 3 set PSK3"); + PrintAndLog(" r 2|4|8 are valid carriers: default = 2"); + PrintAndLog(" d Data to sim as hex - omit to sim from DemodBuffer"); + return 0; +} +int usage_lf_find(void){ + PrintAndLog("Usage: lf search [h] <0|1> [u]"); + PrintAndLog(""); + PrintAndLog("Options:"); + PrintAndLog(" h This help"); + PrintAndLog(" <0|1> Use data from Graphbuffer, if not set, try reading data from tag."); + PrintAndLog(" u Search for Unknown tags, if not set, reads only known tags."); + PrintAndLog("Examples:"); + PrintAndLog(" lf search = try reading data from tag & search for known tags"); + PrintAndLog(" lf search 1 = use data from GraphBuffer & search for known tags"); + PrintAndLog(" lf search u = try reading data from tag & search for known and unknown tags"); + PrintAndLog(" lf search 1 u = use data from GraphBuffer & search for known and unknown tags"); + return 0; +} - dummy[0]= ' '; - UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K}; - sscanf(Cmd, "%"lli" %"lli" %"lli" %s %s", &c.arg[0], &c.arg[1], &c.arg[2],(char*)(&c.d.asBytes),(char*)(&dummy+1)); - // in case they specified 'h' - strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy); - SendCommand(&c); - return 0; +/* send a LF command before reading */ +int CmdLFCommandRead(const char *Cmd) { + + bool errors = FALSE; + bool useHighFreq = FALSE; + uint16_t one = 0, zero = 0; + uint8_t cmdp = 0; + UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K, {0,0,0}}; + + while(param_getchar(Cmd, cmdp) != 0x00) { + switch(param_getchar(Cmd, cmdp)) { + case 'h': + return usage_lf_cmdread(); + case 'H': + useHighFreq = TRUE; + cmdp++; + break; + case 'L': + cmdp++; + break; + case 'c': + param_getstr(Cmd, cmdp+1, (char *)&c.d.asBytes); + cmdp+=2; + break; + case 'd': + c.arg[0] = param_get32ex(Cmd, cmdp+1, 0, 10); + cmdp+=2; + break; + case 'z': + zero = param_get32ex(Cmd, cmdp+1, 0, 10) & 0xFFFF; + cmdp+=2; + break; + case 'o': + one = param_get32ex(Cmd, cmdp+1, 0, 10) & 0xFFFF; + cmdp+=2; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = 1; + break; + } + if(errors) break; + } + // No args + if (cmdp == 0) errors = TRUE; + + //Validations + if (errors) return usage_lf_cmdread(); + + // zero and one lengths + c.arg[1] = zero << 16 | one; + + // add frequency 125 or 134 + c.arg[2] = useHighFreq; + + clearCommandBuffer(); + SendCommand(&c); + return 0; } int CmdFlexdemod(const char *Cmd) @@ -77,22 +212,18 @@ int CmdFlexdemod(const char *Cmd) GraphBuffer[start] = 2; GraphBuffer[start+1] = -2; + uint8_t bits[64] = {0x00}; - uint8_t bits[64]; - - int bit; + int bit, sum; i = start; for (bit = 0; bit < 64; bit++) { - int j; - int sum = 0; - for (j = 0; j < 16; j++) { + sum = 0; + for (int j = 0; j < 16; j++) { sum += GraphBuffer[i++]; } - if (sum > 0) { - bits[bit] = 1; - } else { - bits[bit] = 0; - } + + bits[bit] = (sum > 0) ? 1 : 0; + PrintAndLog("bit %d sum %d", bit, sum); } @@ -110,15 +241,14 @@ int CmdFlexdemod(const char *Cmd) } } + // HACK writing back to graphbuffer. GraphTraceLen = 32*64; i = 0; int phase = 0; for (bit = 0; bit < 64; bit++) { - if (bits[bit] == 0) { - phase = 0; - } else { - phase = 1; - } + + phase = (bits[bit] == 0) ? 0 : 1; + int j; for (j = 0; j < 32; j++) { GraphBuffer[i++] = phase; @@ -132,191 +262,198 @@ int CmdFlexdemod(const char *Cmd) int CmdIndalaDemod(const char *Cmd) { - // Usage: recover 64bit UID by default, specify "224" as arg to recover a 224bit UID - - int state = -1; - int count = 0; - int i, j; - // worst case with GraphTraceLen=64000 is < 4096 - // under normal conditions it's < 2048 - uint8_t rawbits[4096]; - int rawbit = 0; - int worst = 0, worstPos = 0; - PrintAndLog("Expecting a bit less than %d raw bits", GraphTraceLen / 32); - for (i = 0; i < GraphTraceLen-1; i += 2) { - count += 1; - if ((GraphBuffer[i] > GraphBuffer[i + 1]) && (state != 1)) { - if (state == 0) { - for (j = 0; j < count - 8; j += 16) { - rawbits[rawbit++] = 0; - } - if ((abs(count - j)) > worst) { - worst = abs(count - j); - worstPos = i; - } - } - state = 1; - count = 0; - } else if ((GraphBuffer[i] < GraphBuffer[i + 1]) && (state != 0)) { - if (state == 1) { - for (j = 0; j < count - 8; j += 16) { - rawbits[rawbit++] = 1; - } - if ((abs(count - j)) > worst) { - worst = abs(count - j); - worstPos = i; - } - } - state = 0; - count = 0; - } - } - PrintAndLog("Recovered %d raw bits", rawbit); - PrintAndLog("worst metric (0=best..7=worst): %d at pos %d", worst, worstPos); - - // Finding the start of a UID - int uidlen, long_wait; - if (strcmp(Cmd, "224") == 0) { - uidlen = 224; - long_wait = 30; - } else { - uidlen = 64; - long_wait = 29; - } - int start; - int first = 0; - for (start = 0; start <= rawbit - uidlen; start++) { - first = rawbits[start]; - for (i = start; i < start + long_wait; i++) { - if (rawbits[i] != first) { - break; - } - } - if (i == (start + long_wait)) { - break; - } - } - if (start == rawbit - uidlen + 1) { - PrintAndLog("nothing to wait for"); - return 0; - } + // Usage: recover 64bit UID by default, specify "224" as arg to recover a 224bit UID - // Inverting signal if needed - if (first == 1) { - for (i = start; i < rawbit; i++) { - rawbits[i] = !rawbits[i]; - } - } + int state = -1; + int count = 0; + int i, j; - // Dumping UID - uint8_t bits[224]; - char showbits[225]; - showbits[uidlen]='\0'; - int bit; - i = start; - int times = 0; - if (uidlen > rawbit) { - PrintAndLog("Warning: not enough raw bits to get a full UID"); - for (bit = 0; bit < rawbit; bit++) { - bits[bit] = rawbits[i++]; - // As we cannot know the parity, let's use "." and "/" - showbits[bit] = '.' + bits[bit]; - } - showbits[bit+1]='\0'; - PrintAndLog("Partial UID=%s", showbits); - return 0; - } else { - for (bit = 0; bit < uidlen; bit++) { - bits[bit] = rawbits[i++]; - showbits[bit] = '0' + bits[bit]; - } - times = 1; - } + // worst case with GraphTraceLen=64000 is < 4096 + // under normal conditions it's < 2048 + + uint8_t rawbits[4096]; + int rawbit = 0; + int worst = 0, worstPos = 0; + // PrintAndLog("Expecting a bit less than %d raw bits", GraphTraceLen / 32); + + // loop through raw signal - since we know it is psk1 rf/32 fc/2 skip every other value (+=2) + for (i = 0; i < GraphTraceLen-1; i += 2) { + count += 1; + if ((GraphBuffer[i] > GraphBuffer[i + 1]) && (state != 1)) { + // appears redundant - marshmellow + if (state == 0) { + for (j = 0; j < count - 8; j += 16) { + rawbits[rawbit++] = 0; + } + if ((abs(count - j)) > worst) { + worst = abs(count - j); + worstPos = i; + } + } + state = 1; + count = 0; + } else if ((GraphBuffer[i] < GraphBuffer[i + 1]) && (state != 0)) { + //appears redundant + if (state == 1) { + for (j = 0; j < count - 8; j += 16) { + rawbits[rawbit++] = 1; + } + if ((abs(count - j)) > worst) { + worst = abs(count - j); + worstPos = i; + } + } + state = 0; + count = 0; + } + } + + if ( rawbit>0 ){ + PrintAndLog("Recovered %d raw bits, expected: %d", rawbit, GraphTraceLen/32); + PrintAndLog("worst metric (0=best..7=worst): %d at pos %d", worst, worstPos); + } else { + return 0; + } + + // Finding the start of a UID + int uidlen, long_wait; + if (strcmp(Cmd, "224") == 0) { + uidlen = 224; + long_wait = 30; + } else { + uidlen = 64; + long_wait = 29; + } + + int start; + int first = 0; + for (start = 0; start <= rawbit - uidlen; start++) { + first = rawbits[start]; + for (i = start; i < start + long_wait; i++) { + if (rawbits[i] != first) { + break; + } + } + if (i == (start + long_wait)) { + break; + } + } - //convert UID to HEX - uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7; - int idx; - uid1=0; - uid2=0; - if (uidlen==64){ - for( idx=0; idx<64; idx++) { - if (showbits[idx] == '0') { - uid1=(uid1<<1)|(uid2>>31); - uid2=(uid2<<1)|0; - } else { - uid1=(uid1<<1)|(uid2>>31); - uid2=(uid2<<1)|1; - } - } - PrintAndLog("UID=%s (%x%08x)", showbits, uid1, uid2); - } - else { - uid3=0; - uid4=0; - uid5=0; - uid6=0; - uid7=0; - for( idx=0; idx<224; idx++) { - uid1=(uid1<<1)|(uid2>>31); - uid2=(uid2<<1)|(uid3>>31); - uid3=(uid3<<1)|(uid4>>31); - uid4=(uid4<<1)|(uid5>>31); - uid5=(uid5<<1)|(uid6>>31); - uid6=(uid6<<1)|(uid7>>31); - if (showbits[idx] == '0') uid7=(uid7<<1)|0; - else uid7=(uid7<<1)|1; - } - PrintAndLog("UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7); - } + if (start == rawbit - uidlen + 1) { + PrintAndLog("nothing to wait for"); + return 0; + } - // Checking UID against next occurrences - for (; i + uidlen <= rawbit;) { - int failed = 0; - for (bit = 0; bit < uidlen; bit++) { - if (bits[bit] != rawbits[i++]) { - failed = 1; - break; - } - } - if (failed == 1) { - break; - } - times += 1; - } - PrintAndLog("Occurrences: %d (expected %d)", times, (rawbit - start) / uidlen); + // Inverting signal if needed + if (first == 1) { + for (i = start; i < rawbit; i++) { + rawbits[i] = !rawbits[i]; + } + } - // Remodulating for tag cloning - GraphTraceLen = 32*uidlen; - i = 0; - int phase = 0; - for (bit = 0; bit < uidlen; bit++) { - if (bits[bit] == 0) { - phase = 0; - } else { - phase = 1; - } - int j; - for (j = 0; j < 32; j++) { - GraphBuffer[i++] = phase; - phase = !phase; - } - } + // Dumping UID + uint8_t bits[224] = {0x00}; + char showbits[225] = {0x00}; + int bit; + i = start; + int times = 0; + + if (uidlen > rawbit) { + PrintAndLog("Warning: not enough raw bits to get a full UID"); + for (bit = 0; bit < rawbit; bit++) { + bits[bit] = rawbits[i++]; + // As we cannot know the parity, let's use "." and "/" + showbits[bit] = '.' + bits[bit]; + } + showbits[bit+1]='\0'; + PrintAndLog("Partial UID=%s", showbits); + return 0; + } else { + for (bit = 0; bit < uidlen; bit++) { + bits[bit] = rawbits[i++]; + showbits[bit] = '0' + bits[bit]; + } + times = 1; + } + + //convert UID to HEX + uint32_t uid1, uid2, uid3, uid4, uid5, uid6, uid7; + int idx; + uid1 = uid2 = 0; + + if (uidlen==64){ + for( idx=0; idx<64; idx++) { + if (showbits[idx] == '0') { + uid1 = (uid1<<1) | (uid2>>31); + uid2 = (uid2<<1) | 0; + } else { + uid1 = (uid1<<1) | (uid2>>31); + uid2 = (uid2<<1) | 1; + } + } + PrintAndLog("UID=%s (%x%08x)", showbits, uid1, uid2); + } else { + uid3 = uid4 = uid5 = uid6 = uid7 = 0; - RepaintGraphWindow(); - return 0; + for( idx=0; idx<224; idx++) { + uid1 = (uid1<<1) | (uid2>>31); + uid2 = (uid2<<1) | (uid3>>31); + uid3 = (uid3<<1) | (uid4>>31); + uid4 = (uid4<<1) | (uid5>>31); + uid5 = (uid5<<1) | (uid6>>31); + uid6 = (uid6<<1) | (uid7>>31); + + if (showbits[idx] == '0') + uid7 = (uid7<<1) | 0; + else + uid7 = (uid7<<1) | 1; + } + PrintAndLog("UID=%s (%x%08x%08x%08x%08x%08x%08x)", showbits, uid1, uid2, uid3, uid4, uid5, uid6, uid7); + } + + // Checking UID against next occurrences + int failed = 0; + for (; i + uidlen <= rawbit;) { + failed = 0; + for (bit = 0; bit < uidlen; bit++) { + if (bits[bit] != rawbits[i++]) { + failed = 1; + break; + } + } + if (failed == 1) { + break; + } + times += 1; + } + + PrintAndLog("Occurrences: %d (expected %d)", times, (rawbit - start) / uidlen); + + // Remodulating for tag cloning + // HACK: 2015-01-04 this will have an impact on our new way of seening lf commands (demod) + // since this changes graphbuffer data. + GraphTraceLen = 32 * uidlen; + i = 0; + int phase = 0; + for (bit = 0; bit < uidlen; bit++) { + phase = (bits[bit] == 0) ? 0 : 1; + int j; + for (j = 0; j < 32; j++) { + GraphBuffer[i++] = phase; + phase = !phase; + } + } + + RepaintGraphWindow(); + return 1; } int CmdIndalaClone(const char *Cmd) { - unsigned int uid1, uid2, uid3, uid4, uid5, uid6, uid7; UsbCommand c; - uid1=0; - uid2=0; - uid3=0; - uid4=0; - uid5=0; - uid6=0; - uid7=0; + unsigned int uid1, uid2, uid3, uid4, uid5, uid6, uid7; + + uid1 = uid2 = uid3 = uid4 = uid5 = uid6 = uid7 = 0; int n = 0, i = 0; if (strchr(Cmd,'l') != 0) { @@ -338,9 +475,7 @@ int CmdIndalaClone(const char *Cmd) c.d.asDwords[4] = uid5; c.d.asDwords[5] = uid6; c.d.asDwords[6] = uid7; - } - else - { + } else { while (sscanf(&Cmd[i++], "%1x", &n ) == 1) { uid1 = (uid1 << 4) | (uid2 >> 28); uid2 = (uid2 << 4) | (n & 0xf); @@ -351,124 +486,472 @@ int CmdIndalaClone(const char *Cmd) c.arg[1] = uid2; } + clearCommandBuffer(); SendCommand(&c); return 0; } +int CmdLFSetConfig(const char *Cmd) +{ + uint8_t divisor = 0;//Frequency divisor + uint8_t bps = 0; // Bits per sample + uint8_t decimation = 0; //How many to keep + bool averaging = 1; // Defaults to true + bool errors = FALSE; + int trigger_threshold = -1;//Means no change + uint8_t unsigned_trigg = 0; + + uint8_t cmdp = 0; + while(param_getchar(Cmd, cmdp) != 0x00) + { + switch(param_getchar(Cmd, cmdp)) + { + case 'h': + return usage_lf_config(); + case 'H': + divisor = 88; + cmdp++; + break; + case 'L': + divisor = 95; + cmdp++; + break; + case 'q': + errors |= param_getdec(Cmd,cmdp+1,&divisor); + cmdp+=2; + break; + case 't': + errors |= param_getdec(Cmd,cmdp+1,&unsigned_trigg); + cmdp+=2; + if(!errors) trigger_threshold = unsigned_trigg; + break; + case 'b': + errors |= param_getdec(Cmd,cmdp+1,&bps); + cmdp+=2; + break; + case 'd': + errors |= param_getdec(Cmd,cmdp+1,&decimation); + cmdp+=2; + break; + case 'a': + averaging = param_getchar(Cmd,cmdp+1) == '1'; + cmdp+=2; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = 1; + break; + } + if(errors) break; + } + + // No args + if (cmdp == 0) errors = 1; + + //Validations + if (errors) return usage_lf_config(); + + //Bps is limited to 8, so fits in lower half of arg1 + if (bps >> 4) bps = 8; + + sample_config config = { decimation, bps, averaging, divisor, trigger_threshold }; + + //Averaging is a flag on high-bit of arg[1] + UsbCommand c = {CMD_SET_LF_SAMPLING_CONFIG}; + memcpy(c.d.asBytes,&config,sizeof(sample_config)); + clearCommandBuffer(); + SendCommand(&c); + return 0; +} + int CmdLFRead(const char *Cmd) { - UsbCommand c = {CMD_ACQUIRE_RAW_ADC_SAMPLES_125K}; - // 'h' means higher-low-frequency, 134 kHz - if(*Cmd == 'h') { - c.arg[0] = 1; - } else if (*Cmd == '\0') { - c.arg[0] = 0; - } else if (sscanf(Cmd, "%"lli, &c.arg[0]) != 1) { - PrintAndLog("use 'read' or 'read h', or 'read '"); - return 0; - } - SendCommand(&c); - WaitForResponse(CMD_ACK,NULL); - return 0; + bool arg1 = false; + uint8_t cmdp = param_getchar(Cmd, 0); + + if ( cmdp == 'h' || cmdp == 'H') return usage_lf_read(); + + //suppress print + if ( cmdp == 's' || cmdp == 'S') arg1 = true; + + UsbCommand c = {CMD_ACQUIRE_RAW_ADC_SAMPLES_125K, {arg1,0,0}}; + clearCommandBuffer(); + SendCommand(&c); + if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { + PrintAndLog("command execution time out"); + return 1; + } + return 0; +} + +int CmdLFSnoop(const char *Cmd) +{ + uint8_t cmdp = param_getchar(Cmd, 0); + if(cmdp == 'h' || cmdp == 'H') return usage_lf_snoop(); + + UsbCommand c = {CMD_LF_SNOOP_RAW_ADC_SAMPLES}; + clearCommandBuffer(); + SendCommand(&c); + WaitForResponse(CMD_ACK,NULL); + return 0; } static void ChkBitstream(const char *str) { int i; - + /* convert to bitstream if necessary */ - for (i = 0; i < (int)(GraphTraceLen / 2); i++) - { - if (GraphBuffer[i] > 1 || GraphBuffer[i] < 0) - { - CmdBitstream(str); + for (i = 0; i < (int)(GraphTraceLen / 2); i++){ + if (GraphBuffer[i] > 1 || GraphBuffer[i] < 0) { + CmdGetBitStream(""); break; } } } - +//Attempt to simulate any wave in buffer (one bit per output sample) +// converts GraphBuffer to bitstream (based on zero crossings) if needed. int CmdLFSim(const char *Cmd) { - int i; - static int gap; + int i,j; + static int gap; - sscanf(Cmd, "%i", &gap); + sscanf(Cmd, "%i", &gap); - /* convert to bitstream if necessary */ - ChkBitstream(Cmd); + // convert to bitstream if necessary + ChkBitstream(Cmd); - PrintAndLog("Sending data, please wait..."); - for (i = 0; i < GraphTraceLen; i += 48) { - UsbCommand c={CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}}; - int j; - for (j = 0; j < 48; j++) { - c.d.asBytes[j] = GraphBuffer[i+j]; - } - SendCommand(&c); - WaitForResponse(CMD_ACK,NULL); - } + //can send only 512 bits at a time (1 byte sent per bit...) + printf("Sending [%d bytes]", GraphTraceLen); + for (i = 0; i < GraphTraceLen; i += USB_CMD_DATA_SIZE) { + UsbCommand c = {CMD_DOWNLOADED_SIM_SAMPLES_125K, {i, 0, 0}}; - PrintAndLog("Starting simulator..."); - UsbCommand c = {CMD_SIMULATE_TAG_125K, {GraphTraceLen, gap, 0}}; - SendCommand(&c); - return 0; + for (j = 0; j < USB_CMD_DATA_SIZE; j++) { + c.d.asBytes[j] = GraphBuffer[i+j]; + } + clearCommandBuffer(); + SendCommand(&c); + WaitForResponse(CMD_ACK,NULL); + printf("."); + } + + PrintAndLog("\nStarting to simulate"); + UsbCommand c = {CMD_SIMULATE_TAG_125K, {GraphTraceLen, gap, 0}}; + clearCommandBuffer(); + SendCommand(&c); + return 0; } -int CmdLFSimBidir(const char *Cmd) +// by marshmellow - sim fsk data given clock, fcHigh, fcLow, invert +// - allow pull data from DemodBuffer +int CmdLFfskSim(const char *Cmd) { - /* Set ADC to twice the carrier for a slight supersampling */ - UsbCommand c = {CMD_LF_SIMULATE_BIDIR, {47, 384, 0}}; - SendCommand(&c); - return 0; + //might be able to autodetect FCs and clock from Graphbuffer if using demod buffer + // otherwise will need FChigh, FClow, Clock, and bitstream + uint8_t fcHigh = 0, fcLow = 0, clk = 0; + uint8_t invert = 0; + bool errors = FALSE; + char hexData[32] = {0x00}; // store entered hex data + uint8_t data[255] = {0x00}; + int dataLen = 0; + uint8_t cmdp = 0; + + while(param_getchar(Cmd, cmdp) != 0x00) + { + switch(param_getchar(Cmd, cmdp)) + { + case 'h': + return usage_lf_simfsk(); + case 'i': + invert = 1; + cmdp++; + break; + case 'c': + errors |= param_getdec(Cmd, cmdp+1, &clk); + cmdp += 2; + break; + case 'H': + errors |= param_getdec(Cmd, cmdp+1, &fcHigh); + cmdp += 2; + break; + case 'L': + errors |= param_getdec(Cmd, cmdp+1, &fcLow); + cmdp += 2; + break; + //case 's': + // separator = 1; + // cmdp++; + // break; + case 'd': + dataLen = param_getstr(Cmd, cmdp+1, hexData); + if (dataLen == 0) + errors = TRUE; + else + dataLen = hextobinarray((char *)data, hexData); + + if (dataLen == 0) errors = TRUE; + if (errors) PrintAndLog ("Error getting hex data"); + cmdp+=2; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = TRUE; + break; + } + if(errors) break; + } + + // No args + if(cmdp == 0 && DemodBufferLen == 0) + errors = TRUE; + + //Validations + if(errors) return usage_lf_simfsk(); + + if (dataLen == 0){ //using DemodBuffer + if (clk == 0 || fcHigh == 0 || fcLow == 0){ //manual settings must set them all + uint8_t ans = fskClocks(&fcHigh, &fcLow, &clk, 0); + if (ans==0){ + if (!fcHigh) fcHigh = 10; + if (!fcLow) fcLow = 8; + if (!clk) clk = 50; + } + } + } else { + setDemodBuf(data, dataLen, 0); + } + + //default if not found + if (clk == 0) clk = 50; + if (fcHigh == 0) fcHigh = 10; + if (fcLow == 0) fcLow = 8; + + uint16_t arg1, arg2; + arg1 = fcHigh << 8 | fcLow; + arg2 = invert << 8 | clk; + size_t size = DemodBufferLen; + if (size > USB_CMD_DATA_SIZE) { + PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE); + size = USB_CMD_DATA_SIZE; + } + UsbCommand c = {CMD_FSK_SIM_TAG, {arg1, arg2, size}}; + + memcpy(c.d.asBytes, DemodBuffer, size); + clearCommandBuffer(); + SendCommand(&c); + return 0; } -/* simulate an LF Manchester encoded tag with specified bitstream, clock rate and inter-id gap */ -int CmdLFSimManchester(const char *Cmd) +// by marshmellow - sim ask data given clock, invert, manchester or raw, separator +// - allow pull data from DemodBuffer +int CmdLFaskSim(const char *Cmd) { - static int clock, gap; - static char data[1024], gapstring[8]; + // autodetect clock from Graphbuffer if using demod buffer + // needs clock, invert, manchester/raw as m or r, separator as s, and bitstream + uint8_t encoding = 1, separator = 0, clk = 0, invert = 0; + bool errors = FALSE; + char hexData[32] = {0x00}; + uint8_t data[255]= {0x00}; // store entered hex data + int dataLen = 0; + uint8_t cmdp = 0; + + while(param_getchar(Cmd, cmdp) != 0x00) { + switch(param_getchar(Cmd, cmdp)) { + case 'h': return usage_lf_simask(); + case 'i': + invert = 1; + cmdp++; + break; + case 'c': + errors |= param_getdec(Cmd, cmdp+1, &clk); + cmdp += 2; + break; + case 'b': + encoding = 2; //biphase + cmdp++; + break; + case 'm': + encoding = 1; //manchester + cmdp++; + break; + case 'r': + encoding = 0; //raw + cmdp++; + break; + case 's': + separator = 1; + cmdp++; + break; + case 'd': + dataLen = param_getstr(Cmd, cmdp+1, hexData); + if (dataLen == 0) + errors = TRUE; + else + dataLen = hextobinarray((char *)data, hexData); + + if (dataLen == 0) errors = TRUE; + if (errors) PrintAndLog ("Error getting hex data, datalen: %d", dataLen); + cmdp += 2; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = TRUE; + break; + } + if(errors) break; + } - /* get settings/bits */ - sscanf(Cmd, "%i %s %i", &clock, &data[0], &gap); + // No args + if(cmdp == 0 && DemodBufferLen == 0) + errors = TRUE; - /* clear our graph */ - ClearGraph(0); + //Validations + if(errors) return usage_lf_simask(); + + if (dataLen == 0){ //using DemodBuffer + if (clk == 0) + clk = GetAskClock("0", false, false); + } else { + setDemodBuf(data, dataLen, 0); + } + if (clk == 0) clk = 64; + if (encoding == 0) clk = clk/2; //askraw needs to double the clock speed + + size_t size = DemodBufferLen; - /* fill it with our bitstream */ - for (int i = 0; i < strlen(data) ; ++i) - AppendGraph(0, clock, data[i]- '0'); + if (size > USB_CMD_DATA_SIZE) { + PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE); + size = USB_CMD_DATA_SIZE; + } + + PrintAndLog("preparing to sim ask data: %d bits", size); - /* modulate */ - CmdManchesterMod(""); + uint16_t arg1, arg2; + arg1 = clk << 8 | encoding; + arg2 = invert << 8 | separator; - /* show what we've done */ - RepaintGraphWindow(); + UsbCommand c = {CMD_ASK_SIM_TAG, {arg1, arg2, size}}; + memcpy(c.d.asBytes, DemodBuffer, size); + clearCommandBuffer(); + SendCommand(&c); + return 0; +} + +// by marshmellow - sim psk data given carrier, clock, invert +// - allow pull data from DemodBuffer or parameters +int CmdLFpskSim(const char *Cmd) +{ + //might be able to autodetect FC and clock from Graphbuffer if using demod buffer + //will need carrier, Clock, and bitstream + uint8_t carrier=0, clk=0; + uint8_t invert=0; + bool errors = FALSE; + char hexData[32] = {0x00}; // store entered hex data + uint8_t data[255] = {0x00}; + int dataLen = 0; + uint8_t cmdp = 0; + uint8_t pskType = 1; + while(param_getchar(Cmd, cmdp) != 0x00) + { + switch(param_getchar(Cmd, cmdp)) + { + case 'h': + return usage_lf_simpsk(); + case 'i': + invert = 1; + cmdp++; + break; + case 'c': + errors |= param_getdec(Cmd,cmdp+1,&clk); + cmdp+=2; + break; + case 'r': + errors |= param_getdec(Cmd,cmdp+1,&carrier); + cmdp+=2; + break; + case '1': + pskType=1; + cmdp++; + break; + case '2': + pskType=2; + cmdp++; + break; + case '3': + pskType=3; + cmdp++; + break; + case 'd': + dataLen = param_getstr(Cmd, cmdp+1, hexData); + if (dataLen==0) { + errors=TRUE; + } else { + dataLen = hextobinarray((char *)data, hexData); + } + if (dataLen==0) errors=TRUE; + if (errors) PrintAndLog ("Error getting hex data"); + cmdp+=2; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = TRUE; + break; + } + if (errors) break; + } + if (cmdp == 0 && DemodBufferLen == 0) + { + errors = TRUE;// No args + } + + //Validations + if (errors) + { + return usage_lf_simpsk(); + } + if (dataLen == 0){ //using DemodBuffer + PrintAndLog("Getting Clocks"); + if (clk==0) clk = GetPskClock("", FALSE, FALSE); + PrintAndLog("clk: %d",clk); + if (!carrier) carrier = GetPskCarrier("", FALSE, FALSE); + PrintAndLog("carrier: %d", carrier); + } else { + setDemodBuf(data, dataLen, 0); + } - /* simulate */ - sprintf(&gapstring[0], "%i", gap); - CmdLFSim(gapstring); + if (clk <= 0) clk = 32; + if (carrier == 0) carrier = 2; + if (pskType != 1){ + if (pskType == 2){ + //need to convert psk2 to psk1 data before sim + psk2TOpsk1(DemodBuffer, DemodBufferLen); + } else { + PrintAndLog("Sorry, PSK3 not yet available"); + } + } + uint16_t arg1, arg2; + arg1 = clk << 8 | carrier; + arg2 = invert; + size_t size=DemodBufferLen; + if (size > USB_CMD_DATA_SIZE) { + PrintAndLog("DemodBuffer too long for current implementation - length: %d - max: %d", size, USB_CMD_DATA_SIZE); + size=USB_CMD_DATA_SIZE; + } + UsbCommand c = {CMD_PSK_SIM_TAG, {arg1, arg2, size}}; + PrintAndLog("DEBUG: Sending DemodBuffer Length: %d", size); + memcpy(c.d.asBytes, DemodBuffer, size); + clearCommandBuffer(); + SendCommand(&c); + return 0; } -int CmdLFSnoop(const char *Cmd) +int CmdLFSimBidir(const char *Cmd) { - UsbCommand c = {CMD_LF_SNOOP_RAW_ADC_SAMPLES}; - // 'h' means higher-low-frequency, 134 kHz - c.arg[0] = 0; - c.arg[1] = -1; - if (*Cmd == 0) { - // empty - } else if (*Cmd == 'l') { - sscanf(Cmd, "l %"lli, &c.arg[1]); - } else if(*Cmd == 'h') { - c.arg[0] = 1; - sscanf(Cmd, "h %"lli, &c.arg[1]); - } else if (sscanf(Cmd, "%"lli" %"lli, &c.arg[0], &c.arg[1]) < 1) { - PrintAndLog("use 'snoop' or 'snoop {l,h} [trigger threshold]', or 'snoop [trigger threshold]'"); - return 0; - } + // Set ADC to twice the carrier for a slight supersampling + // HACK: not implemented in ARMSRC. + PrintAndLog("Not implemented yet."); + UsbCommand c = {CMD_LF_SIMULATE_BIDIR, {47, 384, 0}}; SendCommand(&c); - WaitForResponse(CMD_ACK,NULL); return 0; } @@ -548,37 +1031,201 @@ int CmdVchDemod(const char *Cmd) return 0; } +//by marshmellow +int CmdLFfind(const char *Cmd) { + int ans = 0; + char cmdp = param_getchar(Cmd, 0); + char testRaw = param_getchar(Cmd, 1); + if (strlen(Cmd) > 3 || cmdp == 'h' || cmdp == 'H') return usage_lf_find(); + + if (!offline && (cmdp != '1')){ + CmdLFRead("s"); + getSamples("30000",false); + } else if (GraphTraceLen < 1000) { + PrintAndLog("Data in Graphbuffer was too small."); + return 0; + } + if (cmdp == 'u' || cmdp == 'U') testRaw = 'u'; + + PrintAndLog("NOTE: some demods output possible binary\n if it finds something that looks like a tag"); + PrintAndLog("False Positives ARE possible\n"); + PrintAndLog("\nChecking for known tags:\n"); + + ans=CmdFSKdemodIO(""); + if (ans>0) { + PrintAndLog("\nValid IO Prox ID Found!"); + return 1; + } + ans=CmdFSKdemodPyramid(""); + if (ans>0) { + PrintAndLog("\nValid Pyramid ID Found!"); + return 1; + } + ans=CmdFSKdemodParadox(""); + if (ans>0) { + PrintAndLog("\nValid Paradox ID Found!"); + return 1; + } + ans=CmdFSKdemodAWID(""); + if (ans>0) { + PrintAndLog("\nValid AWID ID Found!"); + return 1; + } + ans=CmdFSKdemodHID(""); + if (ans>0) { + PrintAndLog("\nValid HID Prox ID Found!"); + return 1; + } + ans=CmdAskEM410xDemod(""); + if (ans>0) { + PrintAndLog("\nValid EM410x ID Found!"); + return 1; + } + ans=CmdG_Prox_II_Demod(""); + if (ans>0) { + PrintAndLog("\nValid Guardall G-Prox II ID Found!"); + return 1; + } + ans=CmdFDXBdemodBI(""); + if (ans>0) { + PrintAndLog("\nValid FDX-B ID Found!"); + return 1; + } + ans=EM4x50Read("", false); + if (ans>0) { + PrintAndLog("\nValid EM4x50 ID Found!"); + return 1; + } + ans=CmdVikingDemod(""); + if (ans>0) { + PrintAndLog("\nValid Viking ID Found!"); + return 1; + } + ans=CmdIndalaDecode(""); + if (ans>0) { + PrintAndLog("\nValid Indala ID Found!"); + return 1; + } + ans=CmdPSKNexWatch(""); + if (ans>0) { + PrintAndLog("\nValid NexWatch ID Found!"); + return 1; + } + ans=CmdJablotronDemod(""); + if (ans>0) { + PrintAndLog("\nValid Jablotron ID Found!"); + return 1; + } + ans=CmdLFNedapDemod(""); + if (ans>0) { + PrintAndLog("\nValid NEDAP ID Found!"); + return 1; + } + // TIdemod? + + + PrintAndLog("\nNo Known Tags Found!\n"); + if (testRaw=='u' || testRaw=='U'){ + //test unknown tag formats (raw mode) + PrintAndLog("\nChecking for Unknown tags:\n"); + ans=AutoCorrelate(4000, FALSE, FALSE); + + if (ans > 0) { + + PrintAndLog("Possible Auto Correlation of %d repeating samples",ans); + + if ( ans % 8 == 0) { + int bytes = (ans / 8); + PrintAndLog("Possible %d bytes", bytes); + int blocks = 0; + if ( bytes % 2 == 0) { + blocks = (bytes / 2); + PrintAndLog("Possible 2 blocks, width %d", blocks); + } + if ( bytes % 4 == 0) { + blocks = (bytes / 4); + PrintAndLog("Possible 4 blocks, width %d", blocks); + } + if ( bytes % 8 == 0) { + blocks = (bytes / 8); + PrintAndLog("Possible 8 blocks, width %d", blocks); + } + if ( bytes % 16 == 0) { + blocks = (bytes / 16); + PrintAndLog("Possible 16 blocks, width %d", blocks); + } + } + } + + ans=GetFskClock("",FALSE,FALSE); + if (ans != 0){ //fsk + ans=FSKrawDemod("",TRUE); + if (ans>0) { + PrintAndLog("\nUnknown FSK Modulated Tag Found!"); + return 1; + } + } + bool st = TRUE; + ans=ASKDemod_ext("0 0 0",TRUE,FALSE,1,&st); + if (ans>0) { + PrintAndLog("\nUnknown ASK Modulated and Manchester encoded Tag Found!"); + PrintAndLog("\nif it does not look right it could instead be ASK/Biphase - try 'data rawdemod ab'"); + return 1; + } + + ans=CmdPSK1rawDemod(""); + if (ans>0) { + PrintAndLog("Possible unknown PSK1 Modulated Tag Found above!\n\nCould also be PSK2 - try 'data rawdemod p2'"); + PrintAndLog("\nCould also be PSK3 - [currently not supported]"); + PrintAndLog("\nCould also be NRZ - try 'data nrzrawdemod"); + return 1; + } + PrintAndLog("\nNo Data Found!\n"); + } + return 0; +} + static command_t CommandTable[] = { - {"help", CmdHelp, 1, "This help"}, - {"cmdread", CmdLFCommandRead, 0, " <'0' period> <'1' period> ['h'] -- Modulate LF reader field to send command before read (all periods in microseconds) (option 'h' for 134)"}, - {"em4x", CmdLFEM4X, 1, "{ EM4X RFIDs... }"}, - {"flexdemod", CmdFlexdemod, 1, "Demodulate samples for FlexPass"}, - {"hid", CmdLFHID, 1, "{ HID RFIDs... }"}, - {"io", CmdLFIO, 1, "{ ioProx tags... }"}, - {"indalademod", CmdIndalaDemod, 1, "['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)"}, - {"indalaclone", CmdIndalaClone, 1, " ['l']-- Clone Indala to T55x7 (tag must be in antenna)(UID in HEX)(option 'l' for 224 UID"}, - {"read", CmdLFRead, 0, "['h' or ] -- Read 125/134 kHz LF ID-only tag (option 'h' for 134, alternatively: f=12MHz/(divisor+1))"}, - {"sim", CmdLFSim, 0, "[GAP] -- Simulate LF tag from buffer with optional GAP (in microseconds)"}, - {"simbidir", CmdLFSimBidir, 0, "Simulate LF tag (with bidirectional data transmission between reader and tag)"}, - {"simman", CmdLFSimManchester, 0, " [GAP] Simulate arbitrary Manchester LF tag"}, - {"snoop", CmdLFSnoop, 0, "['l'|'h'|] [trigger threshold]-- Snoop LF (l:125khz, h:134khz)"}, - {"ti", CmdLFTI, 1, "{ TI RFIDs... }"}, - {"hitag", CmdLFHitag, 1, "{ Hitag tags and transponders... }"}, - {"vchdemod", CmdVchDemod, 1, "['clone'] -- Demodulate samples for VeriChip"}, - {"t55xx", CmdLFT55XX, 1, "{ T55xx RFIDs... }"}, - {"pcf7931", CmdLFPCF7931, 1, "{PCF7931 RFIDs...}"}, - {NULL, NULL, 0, NULL} + {"help", CmdHelp, 1, "This help"}, + {"awid", CmdLFAWID, 1, "{ AWID RFIDs... }"}, + {"em4x", CmdLFEM4X, 1, "{ EM4X RFIDs... }"}, + {"guard", CmdLFGuard, 1, "{ Guardall RFIDs... }"}, + {"hid", CmdLFHID, 1, "{ HID RFIDs... }"}, + {"hitag", CmdLFHitag, 1, "{ HITAG RFIDs... }"}, + {"io", CmdLFIO, 1, "{ IOPROX RFIDs... }"}, + {"jablotron", CmdLFJablotron, 1, "{ JABLOTRON RFIDs... }"}, + {"nedap", CmdLFNedap, 1, "{ NEDAP RFIDs... }"}, + {"pcf7931", CmdLFPCF7931, 1, "{ PCF7931 RFIDs... }"}, + {"presco", CmdLFPresco, 1, "{ Presco RFIDs... }"}, + {"pyramid", CmdLFPyramid, 1, "{ Farpointe/Pyramid RFIDs... }"}, + {"ti", CmdLFTI, 1, "{ TI RFIDs... }"}, + {"t55xx", CmdLFT55XX, 1, "{ T55xx RFIDs... }"}, + {"viking", CmdLFViking, 1, "{ Viking RFIDs... }"}, + {"config", CmdLFSetConfig, 0, "Set config for LF sampling, bit/sample, decimation, frequency"}, + {"cmdread", CmdLFCommandRead, 0, " <'0' period> <'1' period> ['h' 134] \n\t\t-- Modulate LF reader field to send command before read (all periods in microseconds)"}, + {"flexdemod", CmdFlexdemod, 1, "Demodulate samples for FlexPass"}, + {"indalademod", CmdIndalaDemod, 1, "['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)"}, + {"indalaclone", CmdIndalaClone, 0, " ['l']-- Clone Indala to T55x7 (tag must be in antenna)(UID in HEX)(option 'l' for 224 UID"}, + {"read", CmdLFRead, 0, "['s' silent] Read 125/134 kHz LF ID-only tag. Do 'lf read h' for help"}, + {"search", CmdLFfind, 1, "[offline] ['u'] Read and Search for valid known tag (in offline mode it you can load first then search) \n\t\t-- 'u' to search for unknown tags"}, + {"sim", CmdLFSim, 0, "[GAP] -- Simulate LF tag from buffer with optional GAP (in microseconds)"}, + {"simask", CmdLFaskSim, 0, "[clock] [invert <1|0>] [biphase/manchester/raw <'b'|'m'|'r'>] [msg separator 's'] [d ] \n\t\t-- Simulate LF ASK tag from demodbuffer or input"}, + {"simfsk", CmdLFfskSim, 0, "[c ] [i] [H ] [L ] [d ] \n\t\t-- Simulate LF FSK tag from demodbuffer or input"}, + {"simpsk", CmdLFpskSim, 0, "[1|2|3] [c ] [i] [r ] [d ] \n\t\t-- Simulate LF PSK tag from demodbuffer or input"}, + {"simbidir", CmdLFSimBidir, 0, "Simulate LF tag (with bidirectional data transmission between reader and tag)"}, + {"snoop", CmdLFSnoop, 0, "['l'|'h'|] [trigger threshold]-- Snoop LF (l:125khz, h:134khz)"}, + {"vchdemod", CmdVchDemod, 1, "['clone'] -- Demodulate samples for VeriChip"}, + {NULL, NULL, 0, NULL} }; -int CmdLF(const char *Cmd) -{ - CmdsParse(CommandTable, Cmd); - return 0; +int CmdLF(const char *Cmd) { + clearCommandBuffer(); + CmdsParse(CommandTable, Cmd); + return 0; } -int CmdHelp(const char *Cmd) -{ - CmdsHelp(CommandTable); - return 0; +int CmdHelp(const char *Cmd) { + CmdsHelp(CommandTable); + return 0; }