X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/f97d4e2378e04397b3c884d10acb79725dee4e06..347efc12741e72e6ce3a3c4f3ed554fae0cefc73:/common/iso15693tools.h

diff --git a/common/iso15693tools.h b/common/iso15693tools.h
index ec63728f..d9f59cc6 100644
--- a/common/iso15693tools.h
+++ b/common/iso15693tools.h
@@ -5,124 +5,13 @@
 #define ISO15693_H__
 
 // ISO15693 CRC
-#define ISO15_CRC_PRESET	(uint16_t)0xFFFF
-#define ISO15_CRC_POLY		(uint16_t)0x8408
-#define ISO15_CRC_CHECK		((uint16_t)(~0xF0B8 & 0xFFFF)) 	// use this for checking of a correct crc
-
-// REQUEST FLAGS
-
-#define ISO15_REQ_SUBCARRIER_SINGLE	0x00	// Tag should respond using one subcarrier (ASK)
-#define ISO15_REQ_SUBCARRIER_TWO		0x01	// Tag should respond using two subcarriers (FSK)
-#define ISO15_REQ_DATARATE_LOW		0x00	// Tag should respond using low data rate
-#define ISO15_REQ_DATARATE_HIGH		0x02	// Tag should respond using high data rate
-#define ISO15_REQ_NONINVENTORY		0x00
-#define ISO15_REQ_INVENTORY		0x04	// This is an inventory request - see inventory flags
-#define ISO15_REQ_PROTOCOL_NONEXT		0x00
-#define ISO15_REQ_PROTOCOL_EXT		0x08	// RFU
-
-// REQUEST FLAGS when INVENTORY is not set
-
-#define ISO15_REQ_SELECT			0x10	// only selected cards response
-#define ISO15_REQ_ADDRESS			0x20	// this req contains an address
-#define ISO15_REQ_OPTION			0x40	// Command specific option selector
-
-//REQUEST FLAGS when INVENTORY is set
-
-#define ISO15_REQINV_AFI			0x10	// AFI Field is present
-#define ISO15_REQINV_SLOT1		0x20	// 1 Slot
-#define ISO15_REQINV_SLOT16		0x00	// 16 Slots
-#define ISO15_REQINV_OPTION		0x40	// Command specific option selector
-
-//RESPONSE FLAGS
-#define ISO15_RES_ERROR			0x01
-#define ISO15_RES_EXT			0x08	// Protocol Extention	
-
-// RESPONSE ERROR CODES
-#define ISO15_NOERROR			0x00
-#define ISO15_ERROR_CMD_NOT_SUP		0x01	// Command not supported
-#define ISO15_ERROR_CMD_NOT_REC		0x02	// Command not recognized (eg. parameter error)
-#define ISO15_ERROR_CMD_OPTION		0x03	// Command option not supported
-#define ISO15_ERROR_GENERIC		0x0F	// No additional Info about this error
-#define ISO15_ERROR_BLOCK_UNAVAILABLE	0x10	
-#define ISO15_ERROR_BLOCK_LOCKED_ALREADY	0x11	// cannot lock again
-#define ISO15_ERROR_BLOCK_LOCKED		0x12	// cannot be changed
-#define ISO15_ERROR_BLOCK_WRITE		0x13	// Writing was unsuccessful
-#define ISO15_ERROR_BLOCL_WRITELOCK	0x14	// Locking was unsuccessful
-
-// COMMAND CODES
-#define ISO15_CMD_INVENTORY			0x01
-#define ISO15_CMD_STAYQUIET			0x02
-#define ISO15_CMD_READ					0x20
-#define ISO15_CMD_WRITE					0x21
-#define ISO15_CMD_LOCK					0x22
-#define ISO15_CMD_READMULTI			0x23
-#define ISO15_CMD_WRITEMULTI			0x24
-#define ISO15_CMD_SELECT				0x25
-#define ISO15_CMD_RESET					0x26
-#define ISO15_CMD_WRITEAFI				0x27
-#define ISO15_CMD_LOCKAFI				0x28
-#define ISO15_CMD_WRITEDSFID			0x29
-#define ISO15_CMD_LOCKDSFID			0x2A
-#define ISO15_CMD_SYSINFO				0x2B
-#define ISO15_CMD_SECSTATUS			0x2C
-
+#define ISO15693_CRC_PRESET  (uint16_t)0xFFFF
+#define ISO15693_CRC_POLY    (uint16_t)0x8408
+#define ISO15693_CRC_CHECK   ((uint16_t)(~0xF0B8 & 0xFFFF))  // use this for checking of a correct crc
 
 uint16_t Iso15693Crc(uint8_t *v, int n);
 int Iso15693AddCrc(uint8_t *req, int n);
 char* Iso15693sprintUID(char *target,uint8_t *uid);
 unsigned short iclass_crc16(char *data_p, unsigned short length);
 
-//-----------------------------------------------------------------------------
-// Map a sequence of octets (~layer 2 command) into the set of bits to feed
-// to the FPGA, to transmit that command to the tag.
-// Mode: highspeed && one subcarrier (ASK)
-//-----------------------------------------------------------------------------
-
-	// The sampling rate is 106.353 ksps/s, for T = 18.8 us
-
-	// SOF defined as
-	// 1) Unmodulated time of 56.64us
-	// 2) 24 pulses of 423.75khz
-	// 3) logic '1' (unmodulated for 18.88us followed by 8 pulses of 423.75khz)
-
-	static const int Iso15693FrameSOF[] = {
-		-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-		-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-		 1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,
-		 1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,
-		-1, -1, -1, -1,
-		-1, -1, -1, -1,
-		 1,  1,  1,  1,
-		 1,  1,  1,  1
-	};
-	static const int Iso15693Logic0[] = {
-		 1,  1,  1,  1,
-		 1,  1,  1,  1,
-		-1, -1, -1, -1,
-		-1, -1, -1, -1
-	};
-	static const int Iso15693Logic1[] = {
-		-1, -1, -1, -1,
-		-1, -1, -1, -1,
-		 1,  1,  1,  1,
-		 1,  1,  1,  1
-	};
-
-	// EOF defined as
-	// 1) logic '0' (8 pulses of 423.75khz followed by unmodulated for 18.88us)
-	// 2) 24 pulses of 423.75khz
-	// 3) Unmodulated time of 56.64us
-
-	static const int Iso15693FrameEOF[] = {
-		 1,  1,  1,  1,
-		 1,  1,  1,  1,
-		-1, -1, -1, -1,
-		-1, -1, -1, -1,
-		 1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,
-		 1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,
-		-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-		-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
-	};
-
-
 #endif