X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/fb2d24882e31c4a9915a87e28081c3f7d6f3bea4..550a929a69359db76e9dcf61e26effea144311d4:/armsrc/iso14443a.c diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index b9fb9bae..84fbd661 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -561,7 +561,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non // triggering so that we start recording at the point that the tag is moved // near the reader. //----------------------------------------------------------------------------- -void RAMFUNC SnoopIso14443a(uint8_t param) { +void RAMFUNC SniffIso14443a(uint8_t param) { // param: // bit 0 - trigger from first card answer // bit 1 - trigger from first reader 7-bit request @@ -673,6 +673,7 @@ void RAMFUNC SnoopIso14443a(uint8_t param) { } /* And ready to receive another command. */ UartReset(); + //UartInit(receivedCmd, receivedCmdPar); /* And also reset the demod code, which might have been */ /* false-triggered by the commands from the reader. */ DemodReset(); @@ -935,8 +936,15 @@ bool prepare_allocated_tag_modulation(tag_response_info_t* response_info) { // Main loop of simulated tag: receive commands from reader, decide what // response to send, and send it. //----------------------------------------------------------------------------- -void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) +void SimulateIso14443aTag(int tagType, int flags, int uid_2nd, byte_t* data) { + + //Here, we collect UID,NT,AR,NR,UID2,NT2,AR2,NR2 + // This can be used in a reader-only attack. + // (it can also be retrieved via 'hf 14a list', but hey... + uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0}; + uint8_t ar_nr_collected = 0; + uint8_t sak; // The first response contains the ATQA (note: bytes are transmitted in reverse order). @@ -972,7 +980,13 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) response1[0] = 0x01; response1[1] = 0x0f; sak = 0x01; - } break; + } break; + case 6: { // MIFARE Mini + // Says: I am a Mifare Mini, 320b + response1[0] = 0x44; + response1[1] = 0x00; + sak = 0x09; + } break; default: { Dbprintf("Error: unkown tagtype (%d)",tagType); return; @@ -985,17 +999,24 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) // Check if the uid uses the (optional) part uint8_t response2a[5] = {0x00}; - if (uid_2nd) { + if (flags & FLAG_7B_UID_IN_DATA) { response2[0] = 0x88; - num_to_bytes(uid_1st,3,response2+1); - num_to_bytes(uid_2nd,4,response2a); + response2[1] = data[0]; + response2[2] = data[1]; + response2[3] = data[2]; + + response2a[0] = data[3]; + response2a[1] = data[4]; + response2a[2] = data[5]; + response2a[3] = data[6]; //?? response2a[4] = response2a[0] ^ response2a[1] ^ response2a[2] ^ response2a[3]; // Configure the ATQA and SAK accordingly response1[0] |= 0x40; sak |= 0x04; } else { - num_to_bytes(uid_1st,4,response2); + memcpy(response2, data, 4); + //num_to_bytes(uid_1st,4,response2); // Configure the ATQA and SAK accordingly response1[0] &= 0xBF; sak &= 0xFB; @@ -1014,7 +1035,7 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) response3a[0] = sak & 0xFB; ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]); - uint8_t response5[] = { 0x00, 0x00, 0x00, 0x00 }; // Very random tag nonce + uint8_t response5[] = { 0x01, 0x01, 0x01, 0x01 }; // Very random tag nonce uint8_t response6[] = { 0x04, 0x58, 0x80, 0x02, 0x00, 0x00 }; // dummy ATS (pseudo-ATR), answer to RATS: // Format byte = 0x58: FSCI=0x08 (FSC=256), TA(1) and TC(1) present, // TA(1) = 0x80: different divisors not supported, DR = 1, DS = 1 @@ -1129,9 +1150,45 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) if (tracing) { LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); } + uint32_t nonce = bytes_to_num(response5,4); uint32_t nr = bytes_to_num(receivedCmd,4); uint32_t ar = bytes_to_num(receivedCmd+4,4); - Dbprintf("Auth attempt {nr}{ar}: %08x %08x",nr,ar); + //Dbprintf("Auth attempt {nonce}{nr}{ar}: %08x %08x %08x", nonce, nr, ar); + + if(flags & FLAG_NR_AR_ATTACK ) + { + if(ar_nr_collected < 2){ + // Avoid duplicates... probably not necessary, nr should vary. + //if(ar_nr_responses[3] != nr){ + ar_nr_responses[ar_nr_collected*5] = 0; + ar_nr_responses[ar_nr_collected*5+1] = 0; + ar_nr_responses[ar_nr_collected*5+2] = nonce; + ar_nr_responses[ar_nr_collected*5+3] = nr; + ar_nr_responses[ar_nr_collected*5+4] = ar; + ar_nr_collected++; + //} + } + + if(ar_nr_collected > 1 ) { + + if (MF_DBGLEVEL >= 2) { + Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); + Dbprintf("../tools/mfkey/mfkey32 %07x%08x %08x %08x %08x %08x %08x", + ar_nr_responses[0], // UID1 + ar_nr_responses[1], // UID2 + ar_nr_responses[2], // NT + ar_nr_responses[3], // AR1 + ar_nr_responses[4], // NR1 + ar_nr_responses[8], // AR2 + ar_nr_responses[9] // NR2 + ); + } + uint8_t len = ar_nr_collected*5*4; + cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,len,0,&ar_nr_responses,len); + ar_nr_collected = 0; + memset(ar_nr_responses, 0x00, len); + } + } } else { // Check for ISO 14443A-4 compliant commands, look at left nibble switch (receivedCmd[0]) { @@ -1235,6 +1292,8 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data) } } + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + Dbprintf("%x %x %x", happened, happened2, cmdsRecvd); LED_A_OFF(); BigBuf_free_keep_EM(); @@ -1958,7 +2017,7 @@ void ReaderIso14443a(UsbCommand *c) if(param & ISO14A_TOPAZMODE) { AppendCrc14443b(cmd,len); } else { - AppendCrc14443a(cmd,len); + AppendCrc14443a(cmd,len); } len += 2; if (lenbits) lenbits += 16; @@ -2010,13 +2069,11 @@ void ReaderIso14443a(UsbCommand *c) // Therefore try in alternating directions. int32_t dist_nt(uint32_t nt1, uint32_t nt2) { - uint16_t i; - uint32_t nttmp1, nttmp2; - if (nt1 == nt2) return 0; - nttmp1 = nt1; - nttmp2 = nt2; + uint16_t i; + uint32_t nttmp1 = nt1; + uint32_t nttmp2 = nt2; for (i = 1; i < 32768; i++) { nttmp1 = prng_successor(nttmp1, 1); @@ -2035,28 +2092,27 @@ int32_t dist_nt(uint32_t nt1, uint32_t nt2) { // Cloning MiFare Classic Rail and Building Passes, Anywhere, Anytime" // (article by Nicolas T. Courtois, 2009) //----------------------------------------------------------------------------- -void ReaderMifare(bool first_try) -{ - // Mifare AUTH - uint8_t mf_auth[] = { 0x60,0x00,0xf5,0x7b }; - uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; - static uint8_t mf_nr_ar3; - - uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE]; - uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE]; - +void ReaderMifare(bool first_try) { // free eventually allocated BigBuf memory. We want all for tracing. BigBuf_free(); clear_trace(); set_tracing(TRUE); + // Mifare AUTH + uint8_t mf_auth[] = { 0x60,0x00,0xf5,0x7b }; + uint8_t mf_nr_ar[8] = { 0x00 }; //{ 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 }; + static uint8_t mf_nr_ar3 = 0; + + uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = { 0x00 }; + uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = { 0x00 }; + byte_t nt_diff = 0; uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough static byte_t par_low = 0; bool led_on = TRUE; - uint8_t uid[10] ={0}; - uint32_t cuid; + uint8_t uid[10] = {0x00}; + //uint32_t cuid = 0x00; uint32_t nt = 0; uint32_t previous_nt = 0; @@ -2064,13 +2120,15 @@ void ReaderMifare(bool first_try) byte_t par_list[8] = {0x00}; byte_t ks_list[8] = {0x00}; - static uint32_t sync_time; - static uint32_t sync_cycles; + static uint32_t sync_time = 0; + static uint32_t sync_cycles = 0; int catch_up_cycles = 0; int last_catch_up = 0; uint16_t consecutive_resyncs = 0; int isOK = 0; + int numWrongDistance = 0; + if (first_try) { mf_nr_ar3 = 0; iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); @@ -2090,20 +2148,22 @@ void ReaderMifare(bool first_try) LED_A_ON(); LED_B_OFF(); LED_C_OFF(); - + LED_C_ON(); for(uint16_t i = 0; TRUE; i++) { WDT_HIT(); // Test if the action was cancelled - if(BUTTON_PRESS()) { + if(BUTTON_PRESS()) break; + + if (numWrongDistance > 1000) { + isOK = 0; break; } - LED_C_ON(); - - if(!iso14443a_select_card(uid, NULL, &cuid)) { + //if(!iso14443a_select_card(uid, NULL, &cuid)) { + if(!iso14443a_select_card(uid, NULL, NULL)) { if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card"); continue; } @@ -2137,9 +2197,14 @@ void ReaderMifare(bool first_try) nt_attacked = nt; } else { - if (nt_distance == -99999) { // invalid nonce received, try again + + // invalid nonce received, try again + if (nt_distance == -99999) { + numWrongDistance++; + if (MF_DBGLEVEL >= 3) Dbprintf("The two nonces has invalid distance, tag could have good PRNG\n"); continue; } + sync_cycles = (sync_cycles - nt_distance); if (MF_DBGLEVEL >= 3) Dbprintf("calibrating in cycle %d. nt_distance=%d, Sync_cycles: %d\n", i, nt_distance, sync_cycles); continue; @@ -2148,7 +2213,7 @@ void ReaderMifare(bool first_try) if ((nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again... catch_up_cycles = -dist_nt(nt_attacked, nt); - if (catch_up_cycles == 99999) { // invalid nonce received. Don't resync on that one. + if (catch_up_cycles >= 99999) { // invalid nonce received. Don't resync on that one. catch_up_cycles = 0; continue; } @@ -2206,10 +2271,10 @@ void ReaderMifare(bool first_try) } } - mf_nr_ar[3] &= 0x1F; - byte_t buf[28]; + byte_t buf[28] = {0x00}; + memcpy(buf + 0, uid, 4); num_to_bytes(nt, 4, buf + 4); memcpy(buf + 8, par_list, 8); @@ -2218,14 +2283,13 @@ void ReaderMifare(bool first_try) cmd_send(CMD_ACK,isOK,0,0,buf,28); - // Thats it... + set_tracing(FALSE); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); - - set_tracing(FALSE); } -/** + + /* *MIFARE 1K simulate. * *@param flags : @@ -2247,7 +2311,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint8_t cardWRBL = 0; uint8_t cardAUTHSC = 0; uint8_t cardAUTHKEY = 0xff; // no authentication - uint32_t cardRr = 0; +// uint32_t cardRr = 0; uint32_t cuid = 0; //uint32_t rn_enc = 0; uint32_t ans = 0; @@ -2265,16 +2329,17 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!! - uint8_t rSAK[] = {0x08, 0xb6, 0xdd}; + //uint8_t rSAK[] = {0x08, 0xb6, 0xdd}; // Mifare Classic + uint8_t rSAK[] = {0x09, 0x3f, 0xcc }; // Mifare Mini uint8_t rSAK1[] = {0x04, 0xda, 0x17}; - uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04}; + uint8_t rAUTH_NT[] = {0x01, 0x01, 0x01, 0x01}; uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00}; //Here, we collect UID,NT,AR,NR,UID2,NT2,AR2,NR2 // This can be used in a reader-only attack. // (it can also be retrieved via 'hf 14a list', but hey... - uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0}; + uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0}; uint8_t ar_nr_collected = 0; // free eventually allocated BigBuf memory but keep Emulator Memory @@ -2313,6 +2378,11 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } } + // save uid. + ar_nr_responses[0*5] = bytes_to_num(rUIDBCC1+1, 3); + if ( _7BUID ) + ar_nr_responses[0*5+1] = bytes_to_num(rUIDBCC2, 4); + /* * Regardless of what method was used to set the UID, set fifth byte and modify * the ATQA for 4 or 7-byte UID @@ -2321,6 +2391,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * if (_7BUID) { rATQA[0] = 0x44; rUIDBCC1[0] = 0x88; + rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3]; } @@ -2354,7 +2425,6 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * if(cardSTATE == MFEMUL_NOFIELD) continue; //Now, get data - res = EmGetCmd(receivedCmd, &len, receivedCmd_par); if (res == 2) { //Field is off! cardSTATE = MFEMUL_NOFIELD; @@ -2425,13 +2495,15 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint32_t nr = bytes_to_num(&receivedCmd[4], 4); //Collect AR/NR - if(ar_nr_collected < 2 && cardAUTHSC == 2){ + //if(ar_nr_collected < 2 && cardAUTHSC == 2){ + if(ar_nr_collected < 2){ if(ar_nr_responses[2] != ar) {// Avoid duplicates... probably not necessary, ar should vary. - ar_nr_responses[ar_nr_collected*4] = cuid; - ar_nr_responses[ar_nr_collected*4+1] = nonce; - ar_nr_responses[ar_nr_collected*4+2] = ar; - ar_nr_responses[ar_nr_collected*4+3] = nr; + //ar_nr_responses[ar_nr_collected*5] = 0; + //ar_nr_responses[ar_nr_collected*5+1] = 0; + ar_nr_responses[ar_nr_collected*5+2] = nonce; + ar_nr_responses[ar_nr_collected*5+3] = nr; + ar_nr_responses[ar_nr_collected*5+4] = ar; ar_nr_collected++; } // Interactive mode flag, means we need to send ACK @@ -2442,22 +2514,23 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } // --- crypto - crypto1_word(pcs, ar , 1); - cardRr = nr ^ crypto1_word(pcs, 0, 0); - - // test if auth OK - if (cardRr != prng_successor(nonce, 64)){ - if (MF_DBGLEVEL >= 2) Dbprintf("AUTH FAILED for sector %d with key %c. cardRr=%08x, succ=%08x", - cardAUTHSC, cardAUTHKEY == 0 ? 'A' : 'B', - cardRr, prng_successor(nonce, 64)); + //crypto1_word(pcs, ar , 1); + //cardRr = nr ^ crypto1_word(pcs, 0, 0); + + //test if auth OK + //if (cardRr != prng_successor(nonce, 64)){ + + //if (MF_DBGLEVEL >= 4) Dbprintf("AUTH FAILED for sector %d with key %c. cardRr=%08x, succ=%08x", + // cardAUTHSC, cardAUTHKEY == 0 ? 'A' : 'B', + // cardRr, prng_successor(nonce, 64)); // Shouldn't we respond anything here? // Right now, we don't nack or anything, which causes the // reader to do a WUPA after a while. /Martin // -- which is the correct response. /piwi - cardSTATE_TO_IDLE(); - LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); - break; - } + //cardSTATE_TO_IDLE(); + //LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); + //break; + //} ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0); @@ -2565,13 +2638,13 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * || receivedCmd[0] == 0xB0) { // transfer if (receivedCmd[1] >= 16 * 4) { EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); - if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]); + if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]); break; } if (receivedCmd[1] / 4 != cardAUTHSC) { EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); - if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC); + if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC); break; } } @@ -2603,7 +2676,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * if (receivedCmd[0] == 0xC0 || receivedCmd[0] == 0xC1 || receivedCmd[0] == 0xC2) { if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]); if (emlCheckValBl(receivedCmd[1])) { - if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking"); + if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking"); EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA)); break; } @@ -2705,39 +2778,40 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * if(flags & FLAG_INTERACTIVE)// Interactive mode flag, means we need to send ACK { //May just aswell send the collected ar_nr in the response aswell - cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,1,0,&ar_nr_responses,ar_nr_collected*4*4); + uint8_t len = ar_nr_collected*5*4; + cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len); } if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1 ) { if(ar_nr_collected > 1 ) { Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); - Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x", - ar_nr_responses[0], // UID - ar_nr_responses[1], //NT - ar_nr_responses[2], //AR1 - ar_nr_responses[3], //NR1 - ar_nr_responses[6], //AR2 - ar_nr_responses[7] //NR2 + Dbprintf("../tools/mfkey/mfkey32 %06x%08x %08x %08x %08x %08x %08x", + ar_nr_responses[0], // UID1 + ar_nr_responses[1], // UID2 + ar_nr_responses[2], // NT + ar_nr_responses[3], // AR1 + ar_nr_responses[4], // NR1 + ar_nr_responses[8], // AR2 + ar_nr_responses[9] // NR2 ); } else { Dbprintf("Failed to obtain two AR/NR pairs!"); if(ar_nr_collected > 0 ) { - Dbprintf("Only got these: UID=%08x, nonce=%08x, AR1=%08x, NR1=%08x", - ar_nr_responses[0], // UID - ar_nr_responses[1], //NT - ar_nr_responses[2], //AR1 - ar_nr_responses[3] //NR1 + Dbprintf("Only got these: UID=%07x%08x, nonce=%08x, AR1=%08x, NR1=%08x", + ar_nr_responses[0], // UID1 + ar_nr_responses[1], // UID2 + ar_nr_responses[2], // NT + ar_nr_responses[3], // AR1 + ar_nr_responses[4] // NR1 ); } } } - if (MF_DBGLEVEL >= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen()); - + if (MF_DBGLEVEL >= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen()); } - //----------------------------------------------------------------------------- // MIFARE sniffer. // @@ -2747,6 +2821,9 @@ void RAMFUNC SniffMifare(uint8_t param) { // bit 0 - trigger from first card answer // bit 1 - trigger from first reader 7-bit request + // free eventually allocated BigBuf memory + BigBuf_free(); + // C(red) A(yellow) B(green) LEDsoff(); // init trace buffer @@ -2762,12 +2839,6 @@ void RAMFUNC SniffMifare(uint8_t param) { uint8_t receivedResponse[MAX_MIFARE_FRAME_SIZE]; uint8_t receivedResponsePar[MAX_MIFARE_PARITY_SIZE]; - // As we receive stuff, we copy it from receivedCmd or receivedResponse - // into trace, along with its length and other annotations. - //uint8_t *trace = (uint8_t *)BigBuf; - - // free eventually allocated BigBuf memory - BigBuf_free(); // allocate the DMA buffer, used to stream samples from the FPGA uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE); uint8_t *data = dmaBuf; @@ -2858,7 +2929,8 @@ void RAMFUNC SniffMifare(uint8_t param) { if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break; /* And ready to receive another command. */ - UartInit(receivedCmd, receivedCmdPar); + //UartInit(receivedCmd, receivedCmdPar); + UartReset(); /* And also reset the demod code */ DemodReset();