#remove one of the following defines and comment out the relevant line
#in the next section to remove that particular feature from compilation
- APP_CFLAGS = -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE -fno-strict-aliasing -ffunction-sections -fdata-sections
+ APP_CFLAGS = -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE \
+ -fno-strict-aliasing -ffunction-sections -fdata-sections
#-DWITH_LCD
#SRC_LCD = fonts.c LCD.c
SRC_LF = lfops.c hitag2.c lfsampling.c
SRC_ISO15693 = iso15693.c iso15693tools.c
SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c
-SRC_ISO14443b = iso14443.c
+SRC_ISO14443b = iso14443b.c
SRC_CRAPTO1 = crapto1.c crypto1.c des.c aes.c
- SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c
+ SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c
+ #the FPGA bitstream files. Note: order matters!
+ FPGA_BITSTREAMS = fpga_lf.bit fpga_hf.bit
+
+ #the zlib source files required for decompressing the fpga config at run time
+ SRC_ZLIB = inflate.c inffast.c inftrees.c adler32.c zutil.c
+ #additional defines required to compile zlib
+ ZLIB_CFLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP -DZLIB_PM3_TUNED
+ APP_CFLAGS += $(ZLIB_CFLAGS)
+ # zlib includes:
+ APP_CFLAGS += -I../zlib
+
+ # stdint.h provided locally until GCC 4.5 becomes C99 compliant
+ APP_CFLAGS += -I.
+
+ # Compile these in thumb mode (small size)
THUMBSRC = start.c \
$(SRC_LCD) \
$(SRC_ISO15693) \
$(SRC_LF) \
+ $(SRC_ZLIB) \
appmain.c \
printf.c \
util.c \
BigBuf.c \
optimized_cipher.c
- # stdint.h provided locally until GCC 4.5 becomes C99 compliant
- APP_CFLAGS += -I.
-
# Do not move this inclusion before the definition of {THUMB,ASM,ARM}SRC
include ../common/Makefile.common
- OBJS = $(OBJDIR)/osimage.s19
- #$(OBJDIR)/fpgaimage.s19
+ OBJS = $(OBJDIR)/fullimage.s19
+ FPGA_COMPRESSOR = ../client/fpga_compress
all: $(OBJS)
- $(OBJDIR)/fpga_lf.o: fpga_lf.bit
- $(OBJCOPY) -O elf32-littlearm -I binary -B arm --redefine-sym _binary____fpga_fpga_lf_bit_start=_binary_fpga_lf_bit_start --redefine-sym _binary____fpga_fpga_lf_bit_end=_binary_fpga_lf_bit_end --prefix-sections=fpga_lf_bit $^ $@
+ $(OBJDIR)/fpga_all.o: $(OBJDIR)/fpga_all.bit.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --prefix-sections=fpga_all_bit $^ $@
- $(OBJDIR)/fpga_hf.o: fpga_hf.bit
- $(OBJCOPY) -O elf32-littlearm -I binary -B arm --redefine-sym _binary____fpga_fpga_hf_bit_start=_binary_fpga_hf_bit_start --redefine-sym _binary____fpga_fpga_hf_bit_end=_binary_fpga_hf_bit_end --prefix-sections=fpga_hf_bit $^ $@
+ $(OBJDIR)/fpga_all.bit.z: $(FPGA_BITSTREAMS) $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bit,$^) $@
- $(OBJDIR)/fullimage.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_lf.o $(OBJDIR)/fpga_hf.o $(THUMBOBJ) $(ARMOBJ)
+ $(FPGA_COMPRESSOR):
+ make -C ../client $(notdir $(FPGA_COMPRESSOR))
+
+ $(OBJDIR)/fullimage.stage1.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_all.o $(THUMBOBJ) $(ARMOBJ)
$(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^ $(LIBS)
- #$(OBJDIR)/fpgaimage.elf: $(OBJDIR)/fullimage.elf
- # $(OBJCOPY) -F elf32-littlearm --only-section .fpgaimage $^ $@
+ $(OBJDIR)/fullimage.nodata.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --remove-section .data $^ $@
+
+ $(OBJDIR)/fullimage.nodata.o: $(OBJDIR)/fullimage.nodata.bin
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=stage1_image $^ $@
- $(OBJDIR)/osimage.elf: $(OBJDIR)/fullimage.elf
- $(OBJCOPY) -F elf32-littlearm $^ $@
+ $(OBJDIR)/fullimage.data.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --only-section .data $^ $@
+ $(OBJDIR)/fullimage.data.bin.z: $(OBJDIR)/fullimage.data.bin $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bin,$^) $@
+
+ $(OBJDIR)/fullimage.data.o: $(OBJDIR)/fullimage.data.bin.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=compressed_data $^ $@
+
+ $(OBJDIR)/fullimage.elf: $(OBJDIR)/fullimage.nodata.o $(OBJDIR)/fullimage.data.o
+ $(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^
+
tarbin: $(OBJS)
$(TAR) $(TARFLAGS) ../proxmark3-$(platform)-bin.tar $(OBJS:%=armsrc/%) $(OBJS:%.s19=armsrc/%.elf)
-
clean:
$(DELETE) $(OBJDIR)$(PATHSEP)*.o
$(DELETE) $(OBJDIR)$(PATHSEP)*.elf
$(DELETE) $(OBJDIR)$(PATHSEP)*.s19
$(DELETE) $(OBJDIR)$(PATHSEP)*.map
$(DELETE) $(OBJDIR)$(PATHSEP)*.d
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.z
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.bin
$(DELETE) version.c
.PHONY: all clean help
help:
@echo Multi-OS Makefile, you are running on $(DETECTED_OS)
@echo Possible targets:
- @echo + all - Make both:
- @echo + $(OBJDIR)/osimage.s19 - The OS image
- @echo + $(OBJDIR)/fpgaimage.s19 - The FPGA image
- @echo + clean - Clean $(OBJDIR)
+ @echo + all - Build the full image $(OBJDIR)/fullimage.s19
+ @echo + clean - Clean $(OBJDIR)
}
-void SimulateTagHfListen(void)
-{
- // ToDo: historically this used the free buffer, which was 2744 Bytes long.
- // There might be a better size to be defined:
- #define HF_14B_SNOOP_BUFFER_SIZE 2744
- uint8_t *dest = BigBuf_malloc(HF_14B_SNOOP_BUFFER_SIZE);
- uint8_t v = 0;
- int i;
- int p = 0;
-
- // We're using this mode just so that I can test it out; the simulated
- // tag mode would work just as well and be simpler.
- FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
-
- // We need to listen to the high-frequency, peak-detected path.
- SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
- FpgaSetupSsc();
-
- i = 0;
- for(;;) {
- if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
- AT91C_BASE_SSC->SSC_THR = 0xff;
- }
- if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- uint8_t r = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-
- v <<= 1;
- if(r & 1) {
- v |= 1;
- }
- p++;
-
- if(p >= 8) {
- dest[i] = v;
- v = 0;
- p = 0;
- i++;
-
- if(i >= HF_14B_SNOOP_BUFFER_SIZE) {
- break;
- }
- }
- }
- }
- DbpString("simulate tag (now type bitsamples)");
-}
-
void ReadMem(int addr)
{
const uint8_t *data = ((uint8_t *)addr);
/* osimage version information is linked in */
extern struct version_information version_information;
/* bootrom version information is pointed to from _bootphase1_version_pointer */
- extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
+ extern char *_bootphase1_version_pointer, _flash_start, _flash_end, _bootrom_start, _bootrom_end, __data_src_start__;
void SendVersion(void)
{
- char temp[512]; /* Limited data payload in USB packets */
- DbpString("Prox/RFID mark3 RFID instrument");
+ char temp[USB_CMD_DATA_SIZE]; /* Limited data payload in USB packets */
+ char VersionString[USB_CMD_DATA_SIZE] = { '\0' };
/* Try to find the bootrom version information. Expect to find a pointer at
* symbol _bootphase1_version_pointer, perform slight sanity checks on the
*/
char *bootrom_version = *(char**)&_bootphase1_version_pointer;
if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
- DbpString("bootrom version information appears invalid");
+ strcat(VersionString, "bootrom version information appears invalid\n");
} else {
FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);
- DbpString(temp);
+ strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
}
FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);
- DbpString(temp);
+ strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
- FpgaGatherVersion(temp, sizeof(temp));
- DbpString(temp);
- // Send Chip ID
- cmd_send(CMD_ACK,*(AT91C_DBGU_CIDR),0,0,NULL,0);
+ FpgaGatherVersion(FPGA_BITSTREAM_LF, temp, sizeof(temp));
+ strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+ FpgaGatherVersion(FPGA_BITSTREAM_HF, temp, sizeof(temp));
+ strncat(VersionString, temp, sizeof(VersionString) - strlen(VersionString) - 1);
+
+ // Send Chip ID and used flash memory
+ uint32_t text_and_rodata_section_size = (uint32_t)&__data_src_start__ - (uint32_t)&_flash_start;
+ uint32_t compressed_data_section_size = common_area.arg1;
+ cmd_send(CMD_ACK, *(AT91C_DBGU_CIDR), text_and_rodata_section_size + compressed_data_section_size, 0, VersionString, strlen(VersionString));
}
#ifdef WITH_LF
#endif
#ifdef WITH_ISO14443b
- case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443:
- AcquireRawAdcSamplesIso14443(c->arg[0]);
- break;
case CMD_READ_SRI512_TAG:
- ReadSTMemoryIso14443(0x0F);
+ ReadSTMemoryIso14443b(0x0F);
break;
case CMD_READ_SRIX4K_TAG:
- ReadSTMemoryIso14443(0x7F);
+ ReadSTMemoryIso14443b(0x7F);
break;
- case CMD_SNOOP_ISO_14443:
- SnoopIso14443();
+ case CMD_SNOOP_ISO_14443B:
+ SnoopIso14443b();
break;
- case CMD_SIMULATE_TAG_ISO_14443:
- SimulateIso14443Tag();
+ case CMD_SIMULATE_TAG_ISO_14443B:
+ SimulateIso14443bTag();
break;
case CMD_ISO_14443B_COMMAND:
SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
case CMD_EPA_PACE_COLLECT_NONCE:
EPA_PACE_Collect_Nonce(c);
break;
+ case CMD_EPA_PACE_REPLAY:
+ EPA_PACE_Replay(c);
+ break;
case CMD_READER_MIFARE:
ReaderMifare(c->arg[0]);
case CMD_MIFARE_WRITEBL:
MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
- case CMD_MIFAREU_WRITEBL_COMPAT:
- MifareUWriteBlock(c->arg[0], c->d.asBytes);
- break;
+ //case CMD_MIFAREU_WRITEBL_COMPAT:
+ //MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);
+ //break;
case CMD_MIFAREU_WRITEBL:
- MifareUWriteBlock_Special(c->arg[0], c->d.asBytes);
+ MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
break;
case CMD_MIFARE_NESTED:
MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
break;
#endif
- case CMD_SIMULATE_TAG_HF_LISTEN:
- SimulateTagHfListen();
- break;
-
case CMD_BUFF_CLEAR:
BigBuf_Clear();
break;
#include "mifare.h"
#include "../common/crc32.h"
#include "BigBuf.h"
+ #include "fpgaloader.h"
extern const uint8_t OddByteParity[256];
extern int rsamples; // = 0;
extern int ToSendMax;
extern uint8_t ToSend[];
- /// fpga.h
- void FpgaSendCommand(uint16_t cmd, uint16_t v);
- void FpgaWriteConfWord(uint8_t v);
- void FpgaDownloadAndGo(int bitstream_version);
- int FpgaGatherBitstreamVersion();
- void FpgaGatherVersion(char *dst, int len);
- void FpgaSetupSsc(void);
- void SetupSpi(int mode);
- bool FpgaSetupSscDma(uint8_t *buf, int len);
- #define FpgaDisableSscDma(void) AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
- #define FpgaEnableSscDma(void) AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;
- void SetAdcMuxFor(uint32_t whichGpio);
-
- // Definitions for the FPGA commands.
- #define FPGA_CMD_SET_CONFREG (1<<12)
- #define FPGA_CMD_SET_DIVISOR (2<<12)
- #define FPGA_CMD_SET_USER_BYTE1 (3<<12)
- // Definitions for the FPGA configuration word.
- // LF
- #define FPGA_MAJOR_MODE_LF_ADC (0<<5)
- #define FPGA_MAJOR_MODE_LF_EDGE_DETECT (1<<5)
- #define FPGA_MAJOR_MODE_LF_PASSTHRU (2<<5)
- // HF
- #define FPGA_MAJOR_MODE_HF_READER_TX (0<<5)
- #define FPGA_MAJOR_MODE_HF_READER_RX_XCORR (1<<5)
- #define FPGA_MAJOR_MODE_HF_SIMULATOR (2<<5)
- #define FPGA_MAJOR_MODE_HF_ISO14443A (3<<5)
- // BOTH
- #define FPGA_MAJOR_MODE_OFF (7<<5)
- // Options for LF_ADC
- #define FPGA_LF_ADC_READER_FIELD (1<<0)
- // Options for LF_EDGE_DETECT
- #define FPGA_CMD_SET_EDGE_DETECT_THRESHOLD FPGA_CMD_SET_USER_BYTE1
- #define FPGA_LF_EDGE_DETECT_READER_FIELD (1<<0)
- #define FPGA_LF_EDGE_DETECT_TOGGLE_MODE (1<<1)
- // Options for the HF reader, tx to tag
- #define FPGA_HF_READER_TX_SHALLOW_MOD (1<<0)
- // Options for the HF reader, correlating against rx from tag
- #define FPGA_HF_READER_RX_XCORR_848_KHZ (1<<0)
- #define FPGA_HF_READER_RX_XCORR_SNOOP (1<<1)
- #define FPGA_HF_READER_RX_XCORR_QUARTER_FREQ (1<<2)
- // Options for the HF simulated tag, how to modulate
- #define FPGA_HF_SIMULATOR_NO_MODULATION (0<<0)
- #define FPGA_HF_SIMULATOR_MODULATE_BPSK (1<<0)
- #define FPGA_HF_SIMULATOR_MODULATE_212K (2<<0)
- #define FPGA_HF_SIMULATOR_MODULATE_424K (4<<0)
- #define FPGA_HF_SIMULATOR_MODULATE_424K_8BIT 0x5//101
-
- // Options for ISO14443A
- #define FPGA_HF_ISO14443A_SNIFFER (0<<0)
- #define FPGA_HF_ISO14443A_TAGSIM_LISTEN (1<<0)
- #define FPGA_HF_ISO14443A_TAGSIM_MOD (2<<0)
- #define FPGA_HF_ISO14443A_READER_LISTEN (3<<0)
- #define FPGA_HF_ISO14443A_READER_MOD (4<<0)
/// lfops.h
extern uint8_t decimation;
void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode);
/// iso14443.h
-void SimulateIso14443Tag(void);
-void AcquireRawAdcSamplesIso14443(uint32_t parameter);
-void ReadSTMemoryIso14443(uint32_t);
-void RAMFUNC SnoopIso14443(void);
+void SimulateIso14443bTag(void);
+void AcquireRawAdcSamplesIso14443b(uint32_t parameter);
+void ReadSTMemoryIso14443b(uint32_t);
+void RAMFUNC SnoopIso14443b(void);
void SendRawCommand14443B(uint32_t, uint32_t, uint8_t, uint8_t[]);
/// iso14443a.h
/// epa.h
void EPA_PACE_Collect_Nonce(UsbCommand * c);
+void EPA_PACE_Replay(UsbCommand *c);
// mifarecmd.h
void ReaderMifare(bool first_try);
void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain);
void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain);
void MifareWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain);
-void MifareUWriteBlock(uint8_t arg0,uint8_t *datain);
-void MifareUWriteBlock_Special(uint8_t arg0,uint8_t *datain);
+//void MifareUWriteBlockCompat(uint8_t arg0,uint8_t *datain);
+void MifareUWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain);
void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain);
void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain);
void Mifare1ksim(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain);
CC=gcc
CXX=g++
#COMMON_FLAGS = -m32
- VPATH = ../common
+ VPATH = ../common ../zlib
OBJDIR = obj
- LDLIBS = -L/opt/local/lib -L/usr/local/lib ../liblua/liblua.a -lreadline -lpthread -lm
+ LDLIBS = -L/opt/local/lib -L/usr/local/lib -lreadline -lpthread -lm
+ LUALIB = ../liblua/liblua.a
LDFLAGS = $(COMMON_FLAGS)
- CFLAGS = -std=c99 -I. -I../include -I../common -I/opt/local/include -I../liblua -Wall $(COMMON_FLAGS) -g -O4
+ CFLAGS = -std=c99 -I. -I../include -I../common -I../zlib -I/opt/local/include -I../liblua -Wall $(COMMON_FLAGS) -g -O4
LUAPLATFORM = generic
ifneq (,$(findstring MINGW,$(platform)))
else
CXXFLAGS = $(shell pkg-config --cflags QtCore QtGui 2>/dev/null) -Wall -O4
QTLDLIBS = $(shell pkg-config --libs QtCore QtGui 2>/dev/null)
+ LUALIB += -ldl
MOC = $(shell pkg-config --variable=moc_location QtCore)
- LDLIBS += -ldl
# Below is a variant you can use if you have problems compiling with QT5 on ubuntu. see http://www.proxmark.org/forum/viewtopic.php?id=1661 for more info.
#MOC = /usr/lib/x86_64-linux-gnu/qt4/bin/moc
LUAPLATFORM = linux
endif
-
ifneq ($(QTLDLIBS),)
QTGUI = $(OBJDIR)/proxgui.o $(OBJDIR)/proxguiqt.o $(OBJDIR)/proxguiqt.moc.o
CFLAGS += -DHAVE_GUI
pm3_bitlib.c\
aes.c\
protocols.c\
+ sha1.c\
+ ZLIBSRCS = deflate.c adler32.c trees.c zutil.c inflate.c inffast.c inftrees.c
+ ZLIB_FLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP -DZLIB_PM3_TUNED
+ #-DDEBUG -Dverbose=1
+
COREOBJS = $(CORESRCS:%.c=$(OBJDIR)/%.o)
CMDOBJS = $(CMDSRCS:%.c=$(OBJDIR)/%.o)
+ ZLIBOBJS = $(ZLIBSRCS:%.c=$(OBJDIR)/%.o)
RM = rm -f
- BINS = proxmark3 flasher #snooper cli
- CLEAN = cli cli.exe flasher flasher.exe proxmark3 proxmark3.exe snooper snooper.exe $(CMDOBJS) $(OBJDIR)/*.o *.o *.moc.cpp
+ BINS = proxmark3 flasher fpga_compress #snooper cli
+ CLEAN = cli cli.exe flasher flasher.exe proxmark3 proxmark3.exe fpga_compress fpga_compress.exe snooper snooper.exe $(CMDOBJS) $(OBJDIR)/*.o *.o *.moc.cpp
all: lua_build $(BINS)
all-static: LDLIBS:=-static $(LDLIBS)
- all-static: snooper cli flasher
-
- proxmark3: LDLIBS+=$(QTLDLIBS)
+ all-static: snooper cli flasher fpga_compress
+
+ proxmark3: LDLIBS+=$(LUALIB) $(QTLDLIBS)
proxmark3: $(OBJDIR)/proxmark3.o $(COREOBJS) $(CMDOBJS) $(QTGUI)
$(CXX) $(CXXFLAGS) $^ $(LDLIBS) -o $@
flasher: $(OBJDIR)/flash.o $(OBJDIR)/flasher.o $(COREOBJS)
$(CXX) $(CXXFLAGS) $^ $(LDLIBS) -o $@
+ fpga_compress: $(OBJDIR)/fpga_compress.o $(ZLIBOBJS)
+ $(CXX) $(CXXFLAGS) $(ZLIB_FLAGS) $^ $(LDLIBS) -o $@
+
$(OBJDIR)/%.o: %.c
- $(CC) $(CFLAGS) -c -o $@ $<
+ $(CC) $(CFLAGS) $(ZLIB_FLAGS) -c -o $@ $<
$(OBJDIR)/%.o: %.cpp
$(CXX) $(CXXFLAGS) -c -o $@ $<
projects / proxmark3-svn / commitdiff