From: marshmellow42 Date: Tue, 21 Aug 2018 03:08:49 +0000 (-0400) Subject: Add Smartcard functions (RDV4.0) (#646) X-Git-Tag: v3.1.0~26 X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/43591e6464af07466ffd87fcb970527ba748253a Add Smartcard functions (RDV4.0) (#646) * allow common makefile options-defines * remove non-existing file references * Uncomment lcd option (still) not enabled by default use Makefile_Enabled_Options.common to enable lcd if desired. * Add Smartcard Functions * add smartcard to menu + make get atr work sc is now functioning as far as my limited knowledge takes me * sc cleanup - add init to all sc commands... because cmds won't work until the first init happens. (multiple inits don't appear to affect it negatively) * default options to exclude Smartcard for main repo * update changelog --- diff --git a/CHANGELOG.md b/CHANGELOG.md index a7e2e045..da6463e9 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -24,6 +24,7 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac - Changed driver file proxmark3.inf to support both old and new Product/Vendor IDs (piwi) ### Added +- Added `sc` smartcard (contact card) commands - reader, info, raw, upgrade, setclock, list (hardware version RDV4.0 only) must turn option on in makefile options (Willok, Iceman, marshmellow) - Added a bitbang mode to `lf cmdread` if delay is 0 the cmd bits turn off and on the antenna with 0 and 1 respectively (marshmellow) - Added PAC/Stanley detection to lf search (marshmellow) - Added lf pac demod and lf pac read - extracts the raw blocks from a PAC/Stanley tag (marshmellow) diff --git a/armsrc/Makefile b/armsrc/Makefile index f0a0c0ff..d4b13c6b 100644 --- a/armsrc/Makefile +++ b/armsrc/Makefile @@ -15,18 +15,22 @@ APP_CFLAGS = -DON_DEVICE \ include ../common/Makefile_Enabled_Options.common -ifneq (,$(findstring LCD,$(APP_CFLAGS))) +ifneq (,$(findstring WITH_LCD,$(APP_CFLAGS))) SRC_LCD = fonts.c LCD.c else SRC_LCD = endif -#SRC_LCD = fonts.c LCD.c SRC_LF = lfops.c hitag2.c hitagS.c lfsampling.c pcf7931.c lfdemod.c protocols.c SRC_ISO15693 = iso15693.c iso15693tools.c SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c mifaresim.c SRC_ISO14443b = iso14443b.c SRC_CRAPTO1 = crypto1.c des.c SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c parity.c +ifneq (,$(findstring WITH_SMARTCARD,$(APP_CFLAGS))) + SRC_SMARTCARD = i2c.c +else + SRC_SMARTCARD = +endif #the FPGA bitstream files. Note: order matters! FPGA_BITSTREAMS = fpga_lf.bit fpga_hf.bit @@ -44,6 +48,7 @@ THUMBSRC = start.c \ $(SRC_ISO15693) \ $(SRC_LF) \ $(SRC_ZLIB) \ + $(SRC_SMARTCARD) \ appmain.c \ printf.c \ util.c \ diff --git a/armsrc/appmain.c b/armsrc/appmain.c index 27f43b3f..4034788a 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -30,6 +30,10 @@ #ifdef WITH_LCD #include "LCD.h" #endif +#ifdef WITH_SMARTCARD + #include "i2c.h" +#endif + // Craig Young - 14a stand-alone code #ifdef WITH_ISO14443a @@ -357,12 +361,15 @@ void SendStatus(void) { BigBuf_print_status(); Fpga_print_status(); +#ifdef WITH_SMARTCARD + I2C_print_status(); +#endif printConfig(); //LF Sampling config printUSBSpeed(); Dbprintf("Various"); - Dbprintf(" MF_DBGLEVEL......%d", MF_DBGLEVEL); - Dbprintf(" ToSendMax........%d",ToSendMax); - Dbprintf(" ToSendBit........%d",ToSendBit); + Dbprintf(" MF_DBGLEVEL........%d", MF_DBGLEVEL); + Dbprintf(" ToSendMax..........%d", ToSendMax); + Dbprintf(" ToSendBit..........%d", ToSendBit); cmd_send(CMD_ACK,1,0,0,0,0); } @@ -1253,6 +1260,31 @@ void UsbPacketReceived(uint8_t *packet, int len) HfSnoop(c->arg[0], c->arg[1]); break; #endif +#ifdef WITH_SMARTCARD + case CMD_SMART_ATR: { + SmartCardAtr(); + break; + } + case CMD_SMART_SETCLOCK:{ + SmartCardSetClock(c->arg[0]); + break; + } + case CMD_SMART_RAW: { + SmartCardRaw(c->arg[0], c->arg[1], c->d.asBytes); + break; + } + case CMD_SMART_UPLOAD: { + // upload file from client + uint8_t *mem = BigBuf_get_addr(); + memcpy( mem + c->arg[0], c->d.asBytes, USB_CMD_DATA_SIZE); + cmd_send(CMD_ACK,1,0,0,0,0); + break; + } + case CMD_SMART_UPGRADE: { + SmartCardUpgrade(c->arg[0]); + break; + } +#endif case CMD_BUFF_CLEAR: BigBuf_Clear(); diff --git a/armsrc/i2c.c b/armsrc/i2c.c new file mode 100644 index 00000000..721b4b2e --- /dev/null +++ b/armsrc/i2c.c @@ -0,0 +1,720 @@ +//----------------------------------------------------------------------------- +// Willok, June 2018 +// Edits by Iceman, July 2018 +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- +// The main i2c code, for communications with smart card module +//----------------------------------------------------------------------------- +#include "i2c.h" +#include "mifareutil.h" //for mf_dbglevel +#include "string.h" //for memset memcmp + +// ¶¨ÒåÁ¬½ÓÒý½Å +#define GPIO_RST AT91C_PIO_PA1 +#define GPIO_SCL AT91C_PIO_PA5 +#define GPIO_SDA AT91C_PIO_PA7 + +#define SCL_H HIGH(GPIO_SCL) +#define SCL_L LOW(GPIO_SCL) +#define SDA_H HIGH(GPIO_SDA) +#define SDA_L LOW(GPIO_SDA) + +#define SCL_read (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SCL) +#define SDA_read (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SDA) + +#define I2C_ERROR "I2C_WaitAck Error" + +volatile unsigned long c; + +// Ö±½ÓʹÓÃÑ­»·À´ÑÓʱ£¬Ò»¸öÑ­»· 6 ÌõÖ¸Á48M£¬ Delay=1 ´ó¸ÅΪ 200kbps +// timer. +// I2CSpinDelayClk(4) = 12.31us +// I2CSpinDelayClk(1) = 3.07us +void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) { + for (c = delay * 2; c; c--) {}; +} + +// ͨѶÑÓ³Ùº¯Êý communication delay function +#define I2C_DELAY_1CLK I2CSpinDelayClk(1) +#define I2C_DELAY_2CLK I2CSpinDelayClk(2) +#define I2C_DELAY_XCLK(x) I2CSpinDelayClk((x)) + + +#define ISO7618_MAX_FRAME 255 + +void I2C_init(void) { + // ÅäÖø´Î»Òý½Å£¬¹Ø±ÕÉÏÀ­£¬ÍÆÍìÊä³ö£¬Ä¬ÈÏ¸ß + // Configure reset pin, close up pull up, push-pull output, default high + AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST; + AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST; + + // ÅäÖà I2C Òý½Å£¬¿ªÆôÉÏÀ­£¬¿ªÂ©Êä³ö + // Configure I2C pin, open up, open leakage + AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA); // ´ò¿ªÉÏÀ­ Open up the pull up + AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA); + + // ĬÈÏÈý¸ùÏßÈ«²¿À­¸ß + // default three lines all pull up + AT91C_BASE_PIOA->PIO_SODR |= (GPIO_SCL | GPIO_SDA | GPIO_RST); + + // ÔÊÐíÊä³ö + // allow output + AT91C_BASE_PIOA->PIO_OER |= (GPIO_SCL | GPIO_SDA | GPIO_RST); + AT91C_BASE_PIOA->PIO_PER |= (GPIO_SCL | GPIO_SDA | GPIO_RST); +} + + +// ÉèÖø´Î»×´Ì¬ +// set the reset state +void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) { + if (LineRST) + HIGH(GPIO_RST); + else + LOW(GPIO_RST); + + if (LineSCK) + HIGH(GPIO_SCL); + else + LOW(GPIO_SCL); + + if (LineSDA) + HIGH(GPIO_SDA); + else + LOW(GPIO_SDA); +} + +// ¸´Î»½øÈëÖ÷³ÌÐò +// Reset the SIM_Adapter, then enter the main program +// Note: the SIM_Adapter will not enter the main program after power up. Please run this function before use SIM_Adapter. +void I2C_Reset_EnterMainProgram(void) { + I2C_SetResetStatus(0, 0, 0); // À­µÍ¸´Î»Ïß + SpinDelay(30); + I2C_SetResetStatus(1, 0, 0); // ½â³ý¸´Î» + SpinDelay(30); + I2C_SetResetStatus(1, 1, 1); // À­¸ßÊý¾ÝÏß + SpinDelay(10); +} + +// ¸´Î»½øÈëÒýµ¼Ä£Ê½ +// Reset the SIM_Adapter, then enter the bootloader program +// Reserve£ºFor firmware update. +void I2C_Reset_EnterBootloader(void) { + I2C_SetResetStatus(0, 1, 1); // À­µÍ¸´Î»Ïß + SpinDelay(100); + I2C_SetResetStatus(1, 1, 1); // ½â³ý¸´Î» + SpinDelay(10); +} + +// µÈ´ýʱÖÓ±ä¸ß +// Wait for the clock to go High. +bool WaitSCL_H_delay(uint32_t delay) { + while (delay--) { + if (SCL_read) { + return true; + } + I2C_DELAY_1CLK; + } + return false; +} + +// 5000 * 3.07us = 15350us. 15.35ms +bool WaitSCL_H(void) { + return WaitSCL_H_delay(5000); +} + +// Wait max 300ms or until SCL goes LOW. +// Which ever comes first +bool WaitSCL_L_300ms(void) { + volatile uint16_t delay = 300; + while ( delay-- ) { + // exit on SCL LOW + if (!SCL_read) + return true; + + SpinDelay(1); + } + return (delay == 0); +} + +bool I2C_Start(void) { + + I2C_DELAY_XCLK(4); + SDA_H; I2C_DELAY_1CLK; + SCL_H; + if (!WaitSCL_H()) return false; + + I2C_DELAY_2CLK; + + if (!SCL_read) return false; + if (!SDA_read) return false; + + SDA_L; I2C_DELAY_2CLK; + return true; +} + +bool I2C_WaitForSim() { + // variable delay here. + if (!WaitSCL_L_300ms()) + return false; + + // 8051 speaks with smart card. + // 1000*50*3.07 = 153.5ms + // 1byte transfer == 1ms + if (!WaitSCL_H_delay(2000*50) ) + return false; + + return true; +} + +// send i2c STOP +void I2C_Stop(void) { + SCL_L; I2C_DELAY_2CLK; + SDA_L; I2C_DELAY_2CLK; + SCL_H; I2C_DELAY_2CLK; + if (!WaitSCL_H()) return; + SDA_H; + I2C_DELAY_XCLK(8); +} + +// Send i2c ACK +void I2C_Ack(void) { + SCL_L; I2C_DELAY_2CLK; + SDA_L; I2C_DELAY_2CLK; + SCL_H; I2C_DELAY_2CLK; + SCL_L; I2C_DELAY_2CLK; +} + +// Send i2c NACK +void I2C_NoAck(void) { + SCL_L; I2C_DELAY_2CLK; + SDA_H; I2C_DELAY_2CLK; + SCL_H; I2C_DELAY_2CLK; + SCL_L; I2C_DELAY_2CLK; +} + +bool I2C_WaitAck(void) { + SCL_L; I2C_DELAY_1CLK; + SDA_H; I2C_DELAY_1CLK; + SCL_H; + if (!WaitSCL_H()) + return false; + + I2C_DELAY_2CLK; + if (SDA_read) { + SCL_L; + return false; + } + SCL_L; + return true; +} + +void I2C_SendByte(uint8_t data) { + uint8_t i = 8; + + while (i--) { + SCL_L; I2C_DELAY_1CLK; + + if (data & 0x80) + SDA_H; + else + SDA_L; + + data <<= 1; + I2C_DELAY_1CLK; + + SCL_H; + if (!WaitSCL_H()) + return; + + I2C_DELAY_2CLK; + } + SCL_L; +} + +uint8_t I2C_ReadByte(void) { + uint8_t i = 8, b = 0; + + SDA_H; + while (i--) { + b <<= 1; + SCL_L; I2C_DELAY_2CLK; + SCL_H; + if (!WaitSCL_H()) + return 0; + + I2C_DELAY_2CLK; + if (SDA_read) + b |= 0x01; + } + SCL_L; + return b; +} + +// Sends one byte ( command to be written, SlaveDevice address) +bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) { + bool bBreak = true; + do { + if (!I2C_Start()) + return false; + //[C0] + I2C_SendByte(device_address & 0xFE); + if (!I2C_WaitAck()) + break; + + I2C_SendByte(device_cmd); + if (!I2C_WaitAck()) + break; + + bBreak = false; + } while (false); + + I2C_Stop(); + if (bBreak) { + if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR); + return false; + } + return true; +} + +// дÈë1×Ö½ÚÊý¾Ý £¨´ýдÈëÊý¾Ý£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£© +// Sends 1 byte data (Data to be written, command to be written , SlaveDevice address ). +bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) { + bool bBreak = true; + do { + if (!I2C_Start()) + return false; + + I2C_SendByte(device_address & 0xFE); + if (!I2C_WaitAck()) + break; + + I2C_SendByte(device_cmd); + if (!I2C_WaitAck()) + break; + + I2C_SendByte(data); + if (!I2C_WaitAck()) + break; + + bBreak = false; + } while (false); + + I2C_Stop(); + if (bBreak) { + if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR); + return false; + } + return true; +} + +// дÈë1´®Êý¾Ý£¨´ýдÈëÊý×éµØÖ·£¬´ýдÈ볤¶È£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£© +//Sends a string of data (Array, length, command to be written , SlaveDevice address ). +// len = uint8 (max buffer to write 256bytes) +bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) { + bool bBreak = true; + do { + if (!I2C_Start()) + return false; + + I2C_SendByte(device_address & 0xFE); + if (!I2C_WaitAck()) + break; + + I2C_SendByte(device_cmd); + if (!I2C_WaitAck()) + break; + + while (len) { + + I2C_SendByte(*data); + if (!I2C_WaitAck()) + break; + + len--; + data++; + } + + if (len == 0) + bBreak = false; + } while (false); + + I2C_Stop(); + if (bBreak) { + if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR); + return false; + } + return true; +} + +// ¶Á³ö1´®Êý¾Ý£¨´æ·Å¶Á³öÊý¾Ý£¬´ý¶Á³ö³¤¶È£¬´ø¶Á³öµØÖ·£¬Æ÷¼þÀàÐÍ£© +// read 1 strings of data (Data array, Readout length, command to be written , SlaveDevice address ). +// len = uint8 (max buffer to read 256bytes) +uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) { + + if ( !data || len == 0 ) + return 0; + + // extra wait 500us (514us measured) + // 200us (xx measured) + SpinDelayUs(200); + bool bBreak = true; + uint8_t readcount = 0; + + do { + if (!I2C_Start()) + return 0; + + // 0xB0 / 0xC0 == i2c write + I2C_SendByte(device_address & 0xFE); + if (!I2C_WaitAck()) + break; + + I2C_SendByte(device_cmd); + if (!I2C_WaitAck()) + break; + + // 0xB1 / 0xC1 == i2c read + I2C_Start(); + I2C_SendByte(device_address | 1); + if (!I2C_WaitAck()) + break; + + bBreak = false; + } while (false); + + if (bBreak) { + I2C_Stop(); + if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR); + return 0; + } + + // reading + while (len) { + + *data = I2C_ReadByte(); + + len--; + + // ¶ÁÈ¡µÄµÚÒ»¸ö×Ö½ÚΪºóÐø³¤¶È + // The first byte in response is the message length + if (!readcount && (len > *data)) { + len = *data; + } else { + data++; + } + readcount++; + + // acknowledgements. After last byte send NACK. + if (len == 0) + I2C_NoAck(); + else + I2C_Ack(); + } + + I2C_Stop(); + // return bytecount - first byte (which is length byte) + return (readcount) ? --readcount : 0; +} + +uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) { + //START, 0xB0, 0x00, 0x00, START, 0xB1, xx, yy, zz, ......, STOP + bool bBreak = true; + uint8_t readcount = 0; + + // sending + do { + if (!I2C_Start()) + return 0; + + // 0xB0 / 0xC0 i2c write + I2C_SendByte(device_address & 0xFE); + if (!I2C_WaitAck()) + break; + + // msb + I2C_SendByte(msb); + if (!I2C_WaitAck()) + break; + + // lsb + I2C_SendByte(lsb); + if (!I2C_WaitAck()) + break; + + // 0xB1 / 0xC1 i2c read + I2C_Start(); + I2C_SendByte(device_address | 1); + if (!I2C_WaitAck()) + break; + + bBreak = false; + } while (false); + + if (bBreak) { + I2C_Stop(); + if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR); + return 0; + } + + // reading + while (len) { + *data = I2C_ReadByte(); + + data++; + readcount++; + len--; + + // acknowledgements. After last byte send NACK. + if (len == 0) + I2C_NoAck(); + else + I2C_Ack(); + } + + I2C_Stop(); + return readcount; +} + +bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) { + //START, 0xB0, 0x00, 0x00, xx, yy, zz, ......, STOP + bool bBreak = true; + + do { + if (!I2C_Start()) + return false; + + // 0xB0 == i2c write + I2C_SendByte(device_address & 0xFE); + if (!I2C_WaitAck()) + break; + + // msb + I2C_SendByte(msb); + if (!I2C_WaitAck()) + break; + + // lsb + I2C_SendByte(lsb); + if (!I2C_WaitAck()) + break; + + while (len) { + I2C_SendByte(*data); + if (!I2C_WaitAck()) + break; + + len--; + data++; + } + + if (len == 0) + bBreak = false; + } while (false); + + I2C_Stop(); + if (bBreak) { + if ( MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR); + return false; + } + return true; +} + +void I2C_print_status(void) { + DbpString("Smart card module (ISO 7816)"); + uint8_t resp[] = {0,0,0,0}; + I2C_init(); + I2C_Reset_EnterMainProgram(); + uint8_t len = I2C_BufferRead(resp, sizeof(resp), I2C_DEVICE_CMD_GETVERSION, I2C_DEVICE_ADDRESS_MAIN); + if ( len > 0 ) + Dbprintf(" version.................v%x.%02x", resp[0], resp[1]); + else + DbpString(" version.................FAILED"); +} + +bool GetATR(smart_card_atr_t *card_ptr) { + + // clear + if ( card_ptr ) { + card_ptr->atr_len = 0; + memset(card_ptr->atr, 0, sizeof(card_ptr->atr)); + } + + // Send ATR + // start [C0 01] stop start C1 len aa bb cc stop] + I2C_WriteCmd(I2C_DEVICE_CMD_GENERATE_ATR, I2C_DEVICE_ADDRESS_MAIN); + uint8_t cmd[1] = {1}; + LogTrace(cmd, 1, 0, 0, NULL, true); + + //wait for sim card to answer. + if (!I2C_WaitForSim()) + return false; + + // read answer + uint8_t len = I2C_BufferRead(card_ptr->atr, sizeof(card_ptr->atr), I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN); + + if ( len == 0 ) + return false; + + // for some reason we only get first byte of atr, if that is so, send dummy command to retrieve the rest of the atr + if (len == 1) { + + uint8_t data[1] = {0}; + I2C_BufferWrite(data, len, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN); + + if ( !I2C_WaitForSim() ) + return false; + + uint8_t len2 = I2C_BufferRead(card_ptr->atr + len, sizeof(card_ptr->atr) - len, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN); + len = len + len2; + } + + if ( card_ptr ) { + card_ptr->atr_len = len; + LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false); + } + + return true; +} + +void SmartCardAtr(void) { + smart_card_atr_t card; + LED_D_ON(); + clear_trace(); + set_tracing(true); + I2C_init(); + I2C_Reset_EnterMainProgram(); + bool isOK = GetATR( &card ); + cmd_send(CMD_ACK, isOK, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t)); + set_tracing(false); + LEDsoff(); +} + +void SmartCardRaw( uint64_t arg0, uint64_t arg1, uint8_t *data ) { + + LED_D_ON(); + + uint8_t len = 0; + uint8_t *resp = BigBuf_malloc(ISO7618_MAX_FRAME); + smartcard_command_t flags = arg0; + + if ((flags & SC_CONNECT)) + clear_trace(); + + set_tracing(true); + + if ((flags & SC_CONNECT)) { + + I2C_init(); + I2C_Reset_EnterMainProgram(); + + if ( !(flags & SC_NO_SELECT) ) { + smart_card_atr_t card; + bool gotATR = GetATR( &card ); + //cmd_send(CMD_ACK, gotATR, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t)); + if ( !gotATR ) + goto OUT; + } + } + + if ((flags & SC_RAW)) { + + LogTrace(data, arg1, 0, 0, NULL, true); + + // Send raw bytes + // asBytes = A0 A4 00 00 02 + // arg1 = len 5 + I2C_BufferWrite(data, arg1, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN); + + if ( !I2C_WaitForSim() ) + goto OUT; + + len = I2C_BufferRead(resp, ISO7618_MAX_FRAME, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN); + LogTrace(resp, len, 0, 0, NULL, false); + } +OUT: + cmd_send(CMD_ACK, len, 0, 0, resp, len); + set_tracing(false); + LEDsoff(); +} + +void SmartCardUpgrade(uint64_t arg0) { + + LED_C_ON(); + + #define I2C_BLOCK_SIZE 128 + // write. Sector0, with 11,22,33,44 + // erase is 128bytes, and takes 50ms to execute + + I2C_init(); + I2C_Reset_EnterBootloader(); + + bool isOK = true; + uint8_t res = 0; + uint16_t length = arg0; + uint16_t pos = 0; + uint8_t *fwdata = BigBuf_get_addr(); + uint8_t *verfiydata = BigBuf_malloc(I2C_BLOCK_SIZE); + + while (length) { + + uint8_t msb = (pos >> 8) & 0xFF; + uint8_t lsb = pos & 0xFF; + + Dbprintf("FW %02X%02X", msb, lsb); + + size_t size = MIN(I2C_BLOCK_SIZE, length); + + // write + res = I2C_WriteFW(fwdata+pos, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT); + if ( !res ) { + DbpString("Writing failed"); + isOK = false; + break; + } + + // writing takes time. + SpinDelay(50); + + // read + res = I2C_ReadFW(verfiydata, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT); + if ( res == 0) { + DbpString("Reading back failed"); + isOK = false; + break; + } + + // cmp + if ( 0 != memcmp(fwdata+pos, verfiydata, size)) { + DbpString("not equal data"); + isOK = false; + break; + } + + length -= size; + pos += size; + } + cmd_send(CMD_ACK, isOK, pos, 0, 0, 0); + LED_C_OFF(); +} + +// unfinished (or not needed?) +//void SmartCardSetBaud(uint64_t arg0) { +//} + +void SmartCardSetClock(uint64_t arg0) { + LED_D_ON(); + set_tracing(true); + I2C_init(); + I2C_Reset_EnterMainProgram(); + + // Send SIM CLC + // start [C0 05 xx] stop + I2C_WriteByte(arg0, I2C_DEVICE_CMD_SIM_CLC, I2C_DEVICE_ADDRESS_MAIN); + + cmd_send(CMD_ACK, 1, 0, 0, 0, 0); + set_tracing(false); + LEDsoff(); +} diff --git a/armsrc/i2c.h b/armsrc/i2c.h new file mode 100644 index 00000000..4c5c5228 --- /dev/null +++ b/armsrc/i2c.h @@ -0,0 +1,58 @@ +//----------------------------------------------------------------------------- +// Willok, June 2018 +// Edits by Iceman, July 2018 +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- +// The main i2c code, for communications with smart card module +//----------------------------------------------------------------------------- +#ifndef __I2C_H +#define __I2C_H + +#include +#include "proxmark3.h" +#include "apps.h" +#include "util.h" +#include "BigBuf.h" +#include "smartcard.h" + +#define I2C_DEVICE_ADDRESS_BOOT 0xB0 +#define I2C_DEVICE_ADDRESS_MAIN 0xC0 + +#define I2C_DEVICE_CMD_GENERATE_ATR 0x01 +#define I2C_DEVICE_CMD_SEND 0x02 +#define I2C_DEVICE_CMD_READ 0x03 +#define I2C_DEVICE_CMD_SETBAUD 0x04 +#define I2C_DEVICE_CMD_SIM_CLC 0x05 +#define I2C_DEVICE_CMD_GETVERSION 0x06 + + +void I2C_init(void); +void I2C_Reset(void); +void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA); + +void I2C_Reset_EnterMainProgram(void); +void I2C_Reset_EnterBootloader(void); + +bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address); + +bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address); +bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address); +uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address); + +// for firmware +uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address); +bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address); + +bool GetATR(smart_card_atr_t *card_ptr); + +// generic functions +void SmartCardAtr(void); +void SmartCardRaw(uint64_t arg0, uint64_t arg1, uint8_t *data); +void SmartCardUpgrade(uint64_t arg0); +//void SmartCardSetBaud(uint64_t arg0); +void SmartCardSetClock(uint64_t arg0); +void I2C_print_status(void); +#endif diff --git a/client/Makefile b/client/Makefile index 2d256b72..c6ca1cf1 100644 --- a/client/Makefile +++ b/client/Makefile @@ -26,6 +26,11 @@ CXXFLAGS = -I../include -Wall -O3 APP_CFLAGS = include ../common/Makefile_Enabled_Options.common CFLAGS += $(APP_CFLAGS) +ifneq (,$(findstring WITH_SMARTCARD,$(APP_CFLAGS))) + SRC_SMARTCARD = cmdsmartcard.c +else + SRC_SMARTCARD = +endif LUAPLATFORM = generic platform = $(shell uname) @@ -93,7 +98,8 @@ CORESRCS = uart_posix.c \ ui.c \ comms.c -CMDSRCS = crapto1/crapto1.c\ +CMDSRCS = $(SRC_SMARTCARD) \ + crapto1/crapto1.c\ crapto1/crypto1.c\ polarssl/des.c \ polarssl/aes.c\ @@ -310,9 +316,7 @@ DEPENDENCY_FILES = $(patsubst %.c, $(OBJDIR)/%.d, $(CORESRCS) $(CMDSRCS) $(ZLIBS $(patsubst %.cpp, $(OBJDIR)/%.d, $(QTGUISRCS)) \ $(OBJDIR)/proxmark3.d $(OBJDIR)/flash.d $(OBJDIR)/flasher.d $(OBJDIR)/fpga_compress.d - $(DEPENDENCY_FILES): ; .PRECIOUS: $(DEPENDENCY_FILES) -include $(DEPENDENCY_FILES) - diff --git a/client/cmdhf.c b/client/cmdhf.c index 93906a7d..b973354d 100644 --- a/client/cmdhf.c +++ b/client/cmdhf.c @@ -353,6 +353,12 @@ uint16_t printTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace, ui int CmdHFList(const char *Cmd) { + #ifdef WITH_SMARTCARD + PrintAndLog("TEST_WITH_SMARTCARD"); + #endif + #ifdef WITH_TEST + PrintAndLog("TEST_WITH_TEST"); + #endif bool showWaitCycles = false; bool markCRCBytes = false; bool loadFromFile = false; diff --git a/client/cmdmain.c b/client/cmdmain.c index 01d4c9a7..f503021a 100644 --- a/client/cmdmain.c +++ b/client/cmdmain.c @@ -26,7 +26,9 @@ #include "util.h" #include "util_posix.h" #include "cmdscript.h" - +#ifdef WITH_SMARTCARD + #include "cmdsmartcard.h" +#endif static int CmdHelp(const char *Cmd); static int CmdQuit(const char *Cmd); @@ -39,6 +41,9 @@ static command_t CommandTable[] = {"hf", CmdHF, 1, "{ High Frequency commands... }"}, {"hw", CmdHW, 1, "{ Hardware commands... }"}, {"lf", CmdLF, 1, "{ Low Frequency commands... }"}, +#ifdef WITH_SMARTCARD + {"sc", CmdSmartcard,1,"{ Smartcard commands... }"}, +#endif {"script",CmdScript,1, "{ Scripting commands }"}, {"quit", CmdQuit, 1, "Exit program"}, {"exit", CmdQuit, 1, "Exit program"}, diff --git a/client/cmdsmartcard.c b/client/cmdsmartcard.c new file mode 100644 index 00000000..b2a5705d --- /dev/null +++ b/client/cmdsmartcard.c @@ -0,0 +1,707 @@ +//----------------------------------------------------------------------------- +// Copyright (C) 2018 iceman +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- +// Proxmark3 RDV40 Smartcard module commands +//----------------------------------------------------------------------------- +#include "cmdsmartcard.h" +#include "smartcard.h" +#include "comms.h" +#include "protocols.h" + + +static int CmdHelp(const char *Cmd); + +int usage_sm_raw(void) { + PrintAndLog("Usage: sc raw [h|r|c] d <0A 0B 0C ... hex>"); + PrintAndLog(" h : this help"); + PrintAndLog(" r : do not read response"); + PrintAndLog(" a : active signal field ON without select"); + PrintAndLog(" s : active signal field ON with select"); + PrintAndLog(" t : executes TLV decoder if it is possible"); + PrintAndLog(" d : bytes to send"); + PrintAndLog(""); + PrintAndLog("Examples:"); + PrintAndLog(" sc raw d 11223344"); + return 0; +} +int usage_sm_reader(void) { + PrintAndLog("Usage: sc reader [h|s]"); + PrintAndLog(" h : this help"); + PrintAndLog(" s : silent (no messages)"); + PrintAndLog(""); + PrintAndLog("Examples:"); + PrintAndLog(" sc reader"); + return 0; +} +int usage_sm_info(void) { + PrintAndLog("Usage: sc info [h|s]"); + PrintAndLog(" h : this help"); + PrintAndLog(" s : silent (no messages)"); + PrintAndLog(""); + PrintAndLog("Examples:"); + PrintAndLog(" sc info"); + return 0; +} +int usage_sm_upgrade(void) { + PrintAndLog("Upgrade firmware"); + PrintAndLog("Usage: sc upgrade f "); + PrintAndLog(" h : this help"); + PrintAndLog(" f : firmware file name"); + PrintAndLog(""); + PrintAndLog("Examples:"); + PrintAndLog(" sc upgrade f myfile"); + PrintAndLog(""); + PrintAndLog("WARNING - Dangerous command, do wrong and you will brick the smart card socket"); + return 0; +} +int usage_sm_setclock(void) { + PrintAndLog("Usage: sc setclock [h] c "); + PrintAndLog(" h : this help"); + PrintAndLog(" c <> : clockspeed (0 = 16mhz, 1=8mhz, 2=4mhz) "); + PrintAndLog(""); + PrintAndLog("Examples:"); + PrintAndLog(" sc setclock c 2"); + return 0; +} + +int CmdSmartRaw(const char *Cmd) { + + int hexlen = 0; + bool active = false; + bool active_select = false; + uint8_t cmdp = 0; + bool errors = false, reply = true, decodeTLV = false, breakloop = false; + uint8_t data[USB_CMD_DATA_SIZE] = {0x00}; + + while (param_getchar(Cmd, cmdp) != 0x00 && !errors) { + switch (tolower(param_getchar(Cmd, cmdp))) { + case 'h': return usage_sm_raw(); + case 'r': + reply = false; + cmdp++; + break; + case 'a': + active = true; + cmdp++; + break; + case 's': + active_select = true; + cmdp++; + break; + case 't': + decodeTLV = true; + cmdp++; + break; + case 'd': { + switch (param_gethex_to_eol(Cmd, cmdp+1, data, sizeof(data), &hexlen)) { + case 1: + PrintAndLog("Invalid HEX value."); + return 1; + case 2: + PrintAndLog("Too many bytes. Max %d bytes", sizeof(data)); + return 1; + case 3: + PrintAndLog("Hex must have an even number of digits."); + return 1; + } + cmdp++; + breakloop = true; + break; + } + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = true; + break; + } + + if ( breakloop ) + break; + } + + //Validations + if (errors || cmdp == 0 ) return usage_sm_raw(); + + // arg0 = RFU flags + // arg1 = length + UsbCommand c = {CMD_SMART_RAW, {0, hexlen, 0}}; + + if (active || active_select) { + c.arg[0] |= SC_CONNECT; + if (active) + c.arg[0] |= SC_NO_SELECT; + } + + if (hexlen > 0) { + c.arg[0] |= SC_RAW; + } + + memcpy(c.d.asBytes, data, hexlen ); + clearCommandBuffer(); + SendCommand(&c); + + // reading response from smart card + if ( reply ) { + UsbCommand resp; + if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) { + PrintAndLog("smart card response failed"); + return 1; + } + uint32_t datalen = resp.arg[0]; + + if ( !datalen ) { + PrintAndLog("smart card response failed"); + return 1; + } + + PrintAndLog("received %i bytes", datalen); + + if (!datalen) + return 1; + + uint8_t *data = resp.d.asBytes; + + // TLV decoder + if (decodeTLV ) { + + if (datalen >= 2) { + PrintAndLog("%02x %02x | %s", data[datalen - 2], data[datalen - 1], GetAPDUCodeDescription(data[datalen - 2], data[datalen - 1])); + } + if (datalen > 4) { + TLVPrintFromBuffer(data, datalen - 2); + } + } else { + PrintAndLog("%s", sprint_hex(data, datalen)); + } + } + return 0; +} + +int CmdSmartUpgrade(const char *Cmd) { + + PrintAndLog("WARNING - Smartcard socket firmware upgrade."); + PrintAndLog("Dangerous command, do wrong and you will brick the smart card socket"); + + FILE *f; + char filename[FILE_PATH_SIZE] = {0}; + uint8_t cmdp = 0; + bool errors = false; + + while (param_getchar(Cmd, cmdp) != 0x00 && !errors) { + switch (tolower(param_getchar(Cmd, cmdp))) { + case 'f': + //File handling and reading + if ( param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE) >= FILE_PATH_SIZE ) { + PrintAndLog("Filename too long"); + errors = true; + break; + } + cmdp += 2; + break; + case 'h': + return usage_sm_upgrade(); + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = true; + break; + } + } + + //Validations + if (errors || cmdp == 0 ) return usage_sm_upgrade(); + + // load file + f = fopen(filename, "rb"); + if ( !f ) { + PrintAndLog("File: %s: not found or locked.", filename); + return 1; + } + + // get filesize in order to malloc memory + fseek(f, 0, SEEK_END); + long fsize = ftell(f); + fseek(f, 0, SEEK_SET); + + if (fsize < 0) { + PrintAndLog("error, when getting filesize"); + fclose(f); + return 1; + } + + uint8_t *dump = calloc(fsize, sizeof(uint8_t)); + if (!dump) { + PrintAndLog("error, cannot allocate memory "); + fclose(f); + return 1; + } + + size_t bytes_read = fread(dump, 1, fsize, f); + if (f) + fclose(f); + + PrintAndLog("Smartcard socket firmware uploading to PM3"); + //Send to device + uint32_t index = 0; + uint32_t bytes_sent = 0; + uint32_t bytes_remaining = bytes_read; + + while (bytes_remaining > 0){ + uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining); + UsbCommand c = {CMD_SMART_UPLOAD, {index + bytes_sent, bytes_in_packet, 0}}; + + // Fill usb bytes with 0xFF + memset(c.d.asBytes, 0xFF, USB_CMD_DATA_SIZE); + memcpy(c.d.asBytes, dump + bytes_sent, bytes_in_packet); + clearCommandBuffer(); + SendCommand(&c); + if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2000) ) { + PrintAndLog("timeout while waiting for reply."); + free(dump); + return 1; + } + + bytes_remaining -= bytes_in_packet; + bytes_sent += bytes_in_packet; + printf("."); fflush(stdout); + } + free(dump); + printf("\n"); + PrintAndLog("Smartcard socket firmware updating, don\'t turn off your PM3!"); + + // trigger the firmware upgrade + UsbCommand c = {CMD_SMART_UPGRADE, {bytes_read, 0, 0}}; + clearCommandBuffer(); + SendCommand(&c); + UsbCommand resp; + if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) { + PrintAndLog("timeout while waiting for reply."); + return 1; + } + if ( (resp.arg[0] && 0xFF ) ) + PrintAndLog("Smartcard socket firmware upgraded successful"); + else + PrintAndLog("Smartcard socket firmware updating failed"); + return 0; +} + +int CmdSmartInfo(const char *Cmd){ + uint8_t cmdp = 0; + bool errors = false, silent = false; + + while (param_getchar(Cmd, cmdp) != 0x00 && !errors) { + switch (tolower(param_getchar(Cmd, cmdp))) { + case 'h': return usage_sm_info(); + case 's': + silent = true; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = true; + break; + } + cmdp++; + } + + //Validations + if (errors ) return usage_sm_info(); + + UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}}; + clearCommandBuffer(); + SendCommand(&c); + UsbCommand resp; + if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) { + if (!silent) PrintAndLog("smart card select failed"); + return 1; + } + + uint8_t isok = resp.arg[0] & 0xFF; + if (!isok) { + if (!silent) PrintAndLog("smart card select failed"); + return 1; + } + + smart_card_atr_t card; + memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t)); + + // print header + PrintAndLog("\n--- Smartcard Information ---------"); + PrintAndLog("-------------------------------------------------------------"); + PrintAndLog("ISO76183 ATR : %s", sprint_hex(card.atr, card.atr_len)); + PrintAndLog("look up ATR"); + PrintAndLog("http://smartcard-atr.appspot.com/parse?ATR=%s", sprint_hex_inrow(card.atr, card.atr_len) ); + return 0; +} + +int CmdSmartReader(const char *Cmd){ + uint8_t cmdp = 0; + bool errors = false, silent = false; + + while (param_getchar(Cmd, cmdp) != 0x00 && !errors) { + switch (tolower(param_getchar(Cmd, cmdp))) { + case 'h': return usage_sm_reader(); + case 's': + silent = true; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = true; + break; + } + cmdp++; + } + + //Validations + if (errors ) return usage_sm_reader(); + + UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}}; + clearCommandBuffer(); + SendCommand(&c); + UsbCommand resp; + if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) { + if (!silent) PrintAndLog("smart card select failed"); + return 1; + } + + uint8_t isok = resp.arg[0] & 0xFF; + if (!isok) { + if (!silent) PrintAndLog("smart card select failed"); + return 1; + } + smart_card_atr_t card; + memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t)); + PrintAndLog("ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len)); + return 0; +} + +int CmdSmartSetClock(const char *Cmd){ + uint8_t cmdp = 0; + bool errors = false; + uint8_t clock = 0; + while (param_getchar(Cmd, cmdp) != 0x00 && !errors) { + switch (tolower(param_getchar(Cmd, cmdp))) { + case 'h': return usage_sm_setclock(); + case 'c': + clock = param_get8ex(Cmd, cmdp+1, 2, 10); + if ( clock > 2) + errors = true; + + cmdp += 2; + break; + default: + PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp)); + errors = true; + break; + } + } + + //Validations + if (errors || cmdp == 0) return usage_sm_setclock(); + + UsbCommand c = {CMD_SMART_SETCLOCK, {clock, 0, 0}}; + clearCommandBuffer(); + SendCommand(&c); + UsbCommand resp; + if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) { + PrintAndLog("smart card select failed"); + return 1; + } + + uint8_t isok = resp.arg[0] & 0xFF; + if (!isok) { + PrintAndLog("smart card set clock failed"); + return 1; + } + + switch (clock) { + case 0: + PrintAndLog("Clock changed to 16mhz giving 10800 baudrate"); + break; + case 1: + PrintAndLog("Clock changed to 8mhz giving 21600 baudrate"); + break; + case 2: + PrintAndLog("Clock changed to 4mhz giving 86400 baudrate"); + break; + default: + break; + } + return 0; +} + + +// iso 7816-3 +void annotateIso7816(char *exp, size_t size, uint8_t* cmd, uint8_t cmdsize){ + // S-block + if ( (cmd[0] & 0xC0) && (cmdsize == 3) ) { + switch ( (cmd[0] & 0x3f) ) { + case 0x00 : snprintf(exp, size, "S-block RESYNCH req"); break; + case 0x20 : snprintf(exp, size, "S-block RESYNCH resp"); break; + case 0x01 : snprintf(exp, size, "S-block IFS req"); break; + case 0x21 : snprintf(exp, size, "S-block IFS resp"); break; + case 0x02 : snprintf(exp, size, "S-block ABORT req"); break; + case 0x22 : snprintf(exp, size, "S-block ABORT resp"); break; + case 0x03 : snprintf(exp, size, "S-block WTX reqt"); break; + case 0x23 : snprintf(exp, size, "S-block WTX resp"); break; + default : snprintf(exp, size, "S-block"); break; + } + } + // R-block (ack) + else if ( ((cmd[0] & 0xD0) == 0x80) && ( cmdsize > 2) ) { + if ( (cmd[0] & 0x10) == 0 ) + snprintf(exp, size, "R-block ACK"); + else + snprintf(exp, size, "R-block NACK"); + } + // I-block + else { + + int pos = (cmd[0] == 2 || cmd[0] == 3) ? 2 : 3; + switch ( cmd[pos] ) { + case ISO7816_READ_BINARY :snprintf(exp, size, "READ BIN");break; + case ISO7816_WRITE_BINARY :snprintf(exp, size, "WRITE BIN");break; + case ISO7816_UPDATE_BINARY :snprintf(exp, size, "UPDATE BIN");break; + case ISO7816_ERASE_BINARY :snprintf(exp, size, "ERASE BIN");break; + case ISO7816_READ_RECORDS :snprintf(exp, size, "READ RECORDS");break; + case ISO7816_WRITE_RECORDS :snprintf(exp, size, "WRITE RECORDS");break; + case ISO7816_APPEND_RECORD :snprintf(exp, size, "APPEND RECORD");break; + case ISO7816_UPDATE_RECORD :snprintf(exp, size, "UPDATE RECORD");break; + case ISO7816_GET_DATA :snprintf(exp, size, "GET DATA");break; + case ISO7816_PUT_DATA :snprintf(exp, size, "PUT DATA");break; + case ISO7816_SELECT_FILE :snprintf(exp, size, "SELECT FILE");break; + case ISO7816_VERIFY :snprintf(exp, size, "VERIFY");break; + case ISO7816_INTERNAL_AUTHENTICATION :snprintf(exp, size, "INTERNAL AUTH");break; + case ISO7816_EXTERNAL_AUTHENTICATION :snprintf(exp, size, "EXTERNAL AUTH");break; + case ISO7816_GET_CHALLENGE :snprintf(exp, size, "GET CHALLENGE");break; + case ISO7816_MANAGE_CHANNEL :snprintf(exp, size, "MANAGE CHANNEL");break; + default :snprintf(exp, size, "?"); break; + } + } +} + + +uint16_t printScTraceLine(uint16_t tracepos, uint16_t traceLen, uint8_t *trace) { + // sanity check + if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) > traceLen) return traceLen; + + bool isResponse; + uint16_t data_len, parity_len; + uint32_t duration, timestamp, first_timestamp, EndOfTransmissionTimestamp; + char explanation[30] = {0}; + + first_timestamp = *((uint32_t *)(trace)); + timestamp = *((uint32_t *)(trace + tracepos)); + tracepos += 4; + + duration = *((uint16_t *)(trace + tracepos)); + tracepos += 2; + + data_len = *((uint16_t *)(trace + tracepos)); + tracepos += 2; + + if (data_len & 0x8000) { + data_len &= 0x7fff; + isResponse = true; + } else { + isResponse = false; + } + + parity_len = (data_len-1)/8 + 1; + if (tracepos + data_len + parity_len > traceLen) { + return traceLen; + } + uint8_t *frame = trace + tracepos; + tracepos += data_len; + //uint8_t *parityBytes = trace + tracepos; + tracepos += parity_len; + + //--- Draw the data column + char line[18][110]; + + if (data_len == 0 ) { + sprintf(line[0],""); + return tracepos; + } + + for (int j = 0; j < data_len && j/18 < 18; j++) { + snprintf(line[j/18]+(( j % 18) * 4),110, "%02x ", frame[j]); + } + + EndOfTransmissionTimestamp = timestamp + duration; + + annotateIso7816(explanation,sizeof(explanation),frame,data_len); + + int num_lines = MIN((data_len - 1)/18 + 1, 18); + for (int j = 0; j < num_lines ; j++) { + if (j == 0) { + PrintAndLog(" %10u | %10u | %s |%-72s | %s| %s", + (timestamp - first_timestamp), + (EndOfTransmissionTimestamp - first_timestamp), + (isResponse ? "Tag" : "Rdr"), + line[j], + " ", + (j == num_lines-1) ? explanation : ""); + } else { + PrintAndLog(" | | |%-72s | %s| %s", + line[j], + " ", + (j == num_lines-1) ? explanation : ""); + } + } + + // if is last record + if (tracepos + sizeof(uint32_t) + sizeof(uint16_t) + sizeof(uint16_t) >= traceLen) return traceLen; + + return tracepos; +} + +int ScTraceList(const char *Cmd) { + bool loadFromFile = false; + bool saveToFile = false; + char type[5] = {0}; + char filename[FILE_PATH_SIZE] = {0}; + + // parse command line + param_getstr(Cmd, 0, type, sizeof(type)); + param_getstr(Cmd, 1, filename, sizeof(filename)); + + bool errors = false; + if(type[0] == 'h') { + errors = true; + } + + if(!errors) { + if (strcmp(type, "s") == 0) { + saveToFile = true; + } else if (strcmp(type,"l") == 0) { + loadFromFile = true; + } + } + + if ((loadFromFile || saveToFile) && strlen(filename) == 0) { + errors = true; + } + + if (loadFromFile && saveToFile) { + errors = true; + } + + if (errors) { + PrintAndLog("List or save protocol data."); + PrintAndLog("Usage: sc list [l ]"); + PrintAndLog(" sc list [s ]"); + PrintAndLog(" l - load data from file instead of trace buffer"); + PrintAndLog(" s - save data to file"); + PrintAndLog(""); + PrintAndLog("example: sc list"); + PrintAndLog("example: sc list save myCardTrace.trc"); + PrintAndLog("example: sc list l myCardTrace.trc"); + return 0; + } + + uint8_t *trace; + uint32_t tracepos = 0; + uint32_t traceLen = 0; + + if (loadFromFile) { + #define TRACE_CHUNK_SIZE (1<<16) // 64K to start with. Will be enough for BigBuf and some room for future extensions + FILE *tracefile = NULL; + size_t bytes_read; + trace = malloc(TRACE_CHUNK_SIZE); + if (trace == NULL) { + PrintAndLog("Cannot allocate memory for trace"); + return 2; + } + if ((tracefile = fopen(filename,"rb")) == NULL) { + PrintAndLog("Could not open file %s", filename); + free(trace); + return 0; + } + while (!feof(tracefile)) { + bytes_read = fread(trace+traceLen, 1, TRACE_CHUNK_SIZE, tracefile); + traceLen += bytes_read; + if (!feof(tracefile)) { + uint8_t *p = realloc(trace, traceLen + TRACE_CHUNK_SIZE); + if (p == NULL) { + PrintAndLog("Cannot allocate memory for trace"); + free(trace); + fclose(tracefile); + return 2; + } + trace = p; + } + } + fclose(tracefile); + } else { + trace = malloc(USB_CMD_DATA_SIZE); + // Query for the size of the trace + UsbCommand response; + GetFromBigBuf(trace, USB_CMD_DATA_SIZE, 0, &response, -1, false); + traceLen = response.arg[2]; + if (traceLen > USB_CMD_DATA_SIZE) { + uint8_t *p = realloc(trace, traceLen); + if (p == NULL) { + PrintAndLog("Cannot allocate memory for trace"); + free(trace); + return 2; + } + trace = p; + GetFromBigBuf(trace, traceLen, 0, NULL, -1, false); + } + } + + if (saveToFile) { + FILE *tracefile = NULL; + if ((tracefile = fopen(filename,"wb")) == NULL) { + PrintAndLog("Could not create file %s", filename); + return 1; + } + fwrite(trace, 1, traceLen, tracefile); + PrintAndLog("Recorded Activity (TraceLen = %d bytes) written to file %s", traceLen, filename); + fclose(tracefile); + } else { + PrintAndLog("Recorded Activity (TraceLen = %d bytes)", traceLen); + PrintAndLog(""); + PrintAndLog("Start = Start of Start Bit, End = End of last modulation. Src = Source of Transfer"); + PrintAndLog(""); + PrintAndLog(" Start | End | Src | Data (! denotes parity error) | CRC | Annotation |"); + PrintAndLog("------------|------------|-----|-------------------------------------------------------------------------|-----|--------------------|"); + + while(tracepos < traceLen) + { + tracepos = printScTraceLine(tracepos, traceLen, trace); + } + } + + free(trace); + return 0; +} + +int CmdSmartList(const char *Cmd) { + ScTraceList(Cmd); + return 0; +} + +static command_t CommandTable[] = { + {"help", CmdHelp, 1, "This help"}, + {"list", CmdSmartList, 0, "List ISO 7816 history"}, + {"info", CmdSmartInfo, 1, "Tag information [rdv40]"}, + {"reader", CmdSmartReader, 1, "Act like an IS07816 reader [rdv40]"}, + {"raw", CmdSmartRaw, 1, "Send raw hex data to tag [rdv40]"}, + {"upgrade", CmdSmartUpgrade, 1, "Upgrade firmware [rdv40]"}, + {"setclock",CmdSmartSetClock, 1, "Set clock speed"}, + {NULL, NULL, 0, NULL} +}; + +int CmdSmartcard(const char *Cmd) { + clearCommandBuffer(); + CmdsParse(CommandTable, Cmd); + return 0; +} + +int CmdHelp(const char *Cmd) { + CmdsHelp(CommandTable); + return 0; +} diff --git a/client/cmdsmartcard.h b/client/cmdsmartcard.h new file mode 100644 index 00000000..caa06f4f --- /dev/null +++ b/client/cmdsmartcard.h @@ -0,0 +1,39 @@ +//----------------------------------------------------------------------------- +// Copyright (C) 2018 iceman +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- +// Proxmark3 RDV40 Smartcard module commands +//----------------------------------------------------------------------------- + +#ifndef CMDSMARTCARD_H__ +#define CMDSMARTCARD_H__ + +#include +#include +#include +#include +#include "proxmark3.h" +#include "ui.h" +#include "cmdparser.h" +#include "common.h" +#include "util.h" +#include "loclass/fileutils.h" // saveFile +#include "cmdmain.h" // getfromdevice +#include "emv/emvcore.h" // decodeTVL +#include "emv/apduinfo.h" // APDUcode description + +extern int CmdSmartcard(const char *Cmd); + +extern int CmdSmartRaw(const char* cmd); +extern int CmdSmartUpgrade(const char* cmd); +extern int CmdSmartInfo(const char* cmd); +extern int CmdSmartReader(const char *Cmd); + +extern int usage_sm_raw(void); +extern int usage_sm_reader(void); +extern int usage_sm_info(void); +extern int usage_sm_upgrade(void); +#endif diff --git a/common/lfdemod.c b/common/lfdemod.c index f470371a..76900047 100644 --- a/common/lfdemod.c +++ b/common/lfdemod.c @@ -10,8 +10,8 @@ // // NOTES: // LF Demod functions are placed here to allow the flexability to use client or -// device side. Most BUT NOT ALL of these functions are currenlty safe for -// device side use currently. (DetectST for example...) +// device side. Most BUT NOT ALL of these functions are currently safe for +// device side use. (DetectST for example...) // // There are likely many improvements to the code that could be made, please // make suggestions... diff --git a/common/protocols.h b/common/protocols.h index 57e6011f..9ba69d5c 100644 --- a/common/protocols.h +++ b/common/protocols.h @@ -200,11 +200,12 @@ NXP/Philips CUSTOM COMMANDS #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) -#define ISO_14443A 0 -#define ICLASS 1 -#define ISO_14443B 2 -#define TOPAZ 3 -#define PROTO_MIFARE 4 +#define ISO_14443A 0 +#define ICLASS 1 +#define ISO_14443B 2 +#define TOPAZ 3 +#define PROTO_MIFARE 4 +#define ISO_7816_4 5 //-- Picopass fuses #define FUSE_FPERS 0x80 @@ -216,6 +217,29 @@ NXP/Philips CUSTOM COMMANDS #define FUSE_FPROD0 0x02 #define FUSE_RA 0x01 +// ISO 7816-4 Basic interindustry commands. For command APDU's. +#define ISO7816_READ_BINARY 0xB0 +#define ISO7816_WRITE_BINARY 0xD0 +#define ISO7816_UPDATE_BINARY 0xD6 +#define ISO7816_ERASE_BINARY 0x0E +#define ISO7816_READ_RECORDS 0xB2 +#define ISO7816_WRITE_RECORDS 0xD2 +#define ISO7816_APPEND_RECORD 0xE2 +#define ISO7816_UPDATE_RECORD 0xDC +#define ISO7816_GET_DATA 0xCA +#define ISO7816_PUT_DATA 0xDA +#define ISO7816_SELECT_FILE 0xA4 +#define ISO7816_VERIFY 0x20 +#define ISO7816_INTERNAL_AUTHENTICATION 0x88 +#define ISO7816_EXTERNAL_AUTHENTICATION 0x82 +#define ISO7816_GET_CHALLENGE 0xB4 +#define ISO7816_MANAGE_CHANNEL 0x70 +// ISO7816-4 For response APDU's +#define ISO7816_OK 0x9000 +// 6x xx = ERROR + + + void printIclassDumpInfo(uint8_t* iclass_dump); void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb); diff --git a/include/smartcard.h b/include/smartcard.h new file mode 100644 index 00000000..9bed8c9d --- /dev/null +++ b/include/smartcard.h @@ -0,0 +1,29 @@ +//----------------------------------------------------------------------------- +// (c) 2018 Iceman, adapted by Marshmellow +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- +// smart card type prototyping +//----------------------------------------------------------------------------- +#ifndef __SMARTCARD_H +#define __SMARTCARD_H + +//----------------------------------------------------------------------------- +// ISO 7618 Smart Card +//----------------------------------------------------------------------------- +typedef struct { + uint8_t atr_len; + uint8_t atr[30]; +} __attribute__((__packed__)) smart_card_atr_t; + +typedef enum SMARTCARD_COMMAND { + SC_CONNECT = (1 << 0), + SC_NO_DISCONNECT = (1 << 1), + SC_RAW = (1 << 2), + SC_NO_SELECT = (1 << 3) +} smartcard_command_t; + + +#endif diff --git a/include/usb_cmd.h b/include/usb_cmd.h index 194a9d53..bdff7261 100644 --- a/include/usb_cmd.h +++ b/include/usb_cmd.h @@ -60,8 +60,17 @@ typedef struct{ #define CMD_BUFF_CLEAR 0x0105 #define CMD_READ_MEM 0x0106 #define CMD_VERSION 0x0107 -#define CMD_STATUS 0x0108 -#define CMD_PING 0x0109 +#define CMD_STATUS 0x0108 +#define CMD_PING 0x0109 + +// RDV40, Smart card operations +#define CMD_SMART_RAW 0x0140 +#define CMD_SMART_UPGRADE 0x0141 +#define CMD_SMART_UPLOAD 0x0142 +#define CMD_SMART_ATR 0x0143 +// CMD_SMART_SETBAUD is unused for now +#define CMD_SMART_SETBAUD 0x0144 +#define CMD_SMART_SETCLOCK 0x0145 // For low-frequency tags #define CMD_READ_TI_TYPE 0x0202 @@ -126,10 +135,10 @@ typedef struct{ #define CMD_READER_HITAG 0x0372 #define CMD_SIMULATE_HITAG_S 0x0368 -#define CMD_TEST_HITAGS_TRACES 0x0367 -#define CMD_READ_HITAG_S 0x0373 -#define CMD_WR_HITAG_S 0x0375 -#define CMD_EMU_HITAG_S 0x0376 +#define CMD_TEST_HITAGS_TRACES 0x0367 +#define CMD_READ_HITAG_S 0x0373 +#define CMD_WR_HITAG_S 0x0375 +#define CMD_EMU_HITAG_S 0x0376 #define CMD_SIMULATE_TAG_ISO_14443B 0x0381