From: marshmellow42 Date: Sat, 10 Feb 2018 22:30:32 +0000 (-0500) Subject: reconfigure lf cmdread ... X-Git-Tag: v3.1.0~71^2~1 X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/779d9a0e90a20392785adbaa4974cafaa27005a8?ds=inline reconfigure lf cmdread ... to use lf config settings instead of it's own settings. (now allows full options of lf config...) also it will now run `data samples` when the command completes making it not necessary to run manually... note: adjusted client wait message as it was confusing. --- diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 5e9fb193..c7a7a59d 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -4,7 +4,7 @@ // the license. //----------------------------------------------------------------------------- // Miscellaneous routines for low frequency tag operations. -// Tags supported here so far are Texas Instruments (TI), HID +// Tags supported here so far are Texas Instruments (TI), HID, EM4x05, EM410x // Also routines for raw mode reading/simulating of LF waveform //----------------------------------------------------------------------------- @@ -28,17 +28,12 @@ */ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command) { - + // start timer StartTicks(); - int divisor_used = 95; // 125 KHz - // see if 'h' was specified - - if (command[strlen((char *) command) - 1] == 'h') - divisor_used = 88; // 134.8 KHz - sample_config sc = { 0,0,1, divisor_used, 0}; - setSamplingConfig(&sc); - //clear read buffer + // use lf config settings + sample_config *sc = getSamplingConfig(); + // clear read buffer BigBuf_Clear_keep_EM(); /* Make sure the tag is reset */ @@ -46,8 +41,8 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); WaitMS(2500); - //power on - LFSetupFPGAForADC(sc.divisor, 1); + // power on + LFSetupFPGAForADC(sc->divisor, 1); // And a little more time for the tag to fully power up WaitMS(2000); @@ -56,15 +51,21 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint // now modulate the reader field if (bitbang) { - //HACK it appears my loop and if statements take up about 7 us so adjust waits accordingly... + // HACK it appears the loop and if statements take up about 7us so adjust waits accordingly... uint8_t hack_cnt = 7; if (period_0 < hack_cnt || period_1 < hack_cnt) { - DbpString("Warning periods cannot be less than 7 in bit bang mode"); + DbpString("Warning periods cannot be less than 7us in bit bang mode"); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); return; } - //prime cmd_len to save time comparing strings while modulating + + // hack2 needed--- it appears to take about 8-16us to turn the antenna back on + // leading to ~ 1 to 2 125khz samples extra in every off period + // so we should test for last 0 before next 1 and reduce period_0 by this extra amount... + // but is this time different for every antenna or other hw builds??? more testing needed + + // prime cmd_len to save time comparing strings while modulating int cmd_len = 0; while(command[cmd_len] != '\0' && command[cmd_len] != ' ') cmd_len++; @@ -72,7 +73,6 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint int counter = 0; bool off = false; for (counter = 0; counter < cmd_len; counter++) { - //while(*command != '\0' && *command != ' ') { // if cmd = 0 then turn field off if (command[counter] == '0') { // if field already off leave alone (affects timing otherwise) @@ -81,17 +81,17 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint LED_D_OFF(); off = true; } - // note we appear to take about 6us to switch over (or run the if statements/loop...) + // note we appear to take about 7us to switch over (or run the if statements/loop...) WaitUS(period_0-hack_cnt); // else if cmd = 1 then turn field on } else { // if field already on leave alone (affects timing otherwise) if (off) { - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); + FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); LED_D_ON(); off = false; } - // note we appear to take about 6us to switch over (or run the if statements/loop...) + // note we appear to take about 7us to switch over (or run the if statements/loop...) WaitUS(period_1-hack_cnt); } } @@ -100,7 +100,7 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); WaitUS(delay_off); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); LED_D_ON(); if(*(command++) == '0') { @@ -112,14 +112,18 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LED_D_OFF(); WaitUS(delay_off); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); + FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc->divisor); } FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // now do the read DoAcquisition_config(false, 0); - // note leaves field on... (for future commands?) + + // Turn off antenna + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + // tell client we are done + cmd_send(CMD_ACK,0,0,0,0,0); } /* blank r/w tag data stream diff --git a/client/cmdlf.c b/client/cmdlf.c index ef9c3cbb..42f73fa1 100644 --- a/client/cmdlf.c +++ b/client/cmdlf.c @@ -54,26 +54,24 @@ static int CmdHelp(const char *Cmd); int usage_lf_cmdread(void) { - PrintAndLog("Usage: lf cmdread d z o c [H] "); + PrintAndLog("Usage: lf cmdread d z o c "); PrintAndLog("Options: "); PrintAndLog(" h This help"); - PrintAndLog(" L Low frequency (125 KHz)"); - PrintAndLog(" H High frequency (134 KHz)"); - PrintAndLog(" d delay OFF period"); - PrintAndLog(" z time period ZERO"); - PrintAndLog(" o time period ONE"); + PrintAndLog(" d delay OFF period between bits (0 for bitbang mode)"); + PrintAndLog(" z time period ZERO (antenna off in bitbang mode)"); + PrintAndLog(" o time period ONE (antenna on in bitbang mode)"); PrintAndLog(" c Command bytes"); PrintAndLog(" ************* All periods in microseconds"); + PrintAndLog(" ************* Use lf config to configure options."); PrintAndLog("Examples:"); PrintAndLog(" lf cmdread d 80 z 100 o 200 c 11000"); - PrintAndLog(" lf cmdread d 80 z 100 o 100 c 11000 H"); + PrintAndLog(" lf cmdread d 80 z 100 o 100 c 11000"); return 0; } /* send a command before reading */ int CmdLFCommandRead(const char *Cmd) { - static char dummy[3] = {0x20,0x00,0x00}; UsbCommand c = {CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K}; bool errors = false; //uint8_t divisor = 95; //125khz @@ -84,14 +82,6 @@ int CmdLFCommandRead(const char *Cmd) { case 'h': return usage_lf_cmdread(); - case 'H': - //divisor = 88; - dummy[1]='h'; - cmdp++; - break; - case 'L': - cmdp++; - break; case 'c': param_getstr(Cmd, cmdp+1, (char *)&c.d.asBytes, sizeof(c.d.asBytes)); cmdp+=2; @@ -121,11 +111,13 @@ int CmdLFCommandRead(const char *Cmd) //Validations if(errors) return usage_lf_cmdread(); - // in case they specified 'H' - strcpy((char *)&c.d.asBytes + strlen((char *)c.d.asBytes), dummy); - clearCommandBuffer(); SendCommand(&c); + + WaitForResponse(CMD_ACK,NULL); + getSamples(0, true); + + return 0; } diff --git a/client/cmdmain.c b/client/cmdmain.c index 719617fd..8d9313f9 100644 --- a/client/cmdmain.c +++ b/client/cmdmain.c @@ -162,7 +162,7 @@ bool WaitForResponseTimeoutW(uint32_t cmd, UsbCommand* response, size_t ms_timeo } if (msclock() - start_time > 2000 && show_warning) { PrintAndLog("Waiting for a response from the proxmark..."); - PrintAndLog("Don't forget to cancel its operation first by pressing on the button"); + PrintAndLog("You can cancel this operation by pressing the pm3 button"); show_warning = false; } }