From: pwpiwi Date: Sat, 11 Jan 2020 21:10:40 +0000 (+0100) Subject: usb communication (device side) refactoring X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/867e10a5fdf0d26c8ee63735b894e7d3953ebbb2?ds=sidebyside usb communication (device side) refactoring * merge cmd.c into usb_cdc.c * move back usb_cdc.[ch] to common/ * declare low level functions usb_read() and usb_write() and more functions as static * use cmd_receive() in bootrom.c and appmain.c * remove unused memory wasting csrTab[100] in usb_cdc.c * replace more byte_t by uint8_t * more whitespace fixes --- diff --git a/armsrc/Makefile b/armsrc/Makefile index 3d1ba79e..7b9e1356 100644 --- a/armsrc/Makefile +++ b/armsrc/Makefile @@ -50,8 +50,7 @@ THUMBSRC = start.c \ printf.c \ util.c \ string.c \ - usb_cdc.c \ - cmd.c + usb_cdc.c # Compile these in thumb mode optimized for speed (still smaller than ARM mode) THUMBOPTSRC = $(SRC_ISO15693) diff --git a/armsrc/appmain.c b/armsrc/appmain.c index 70cabd2e..38965c32 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -13,7 +13,6 @@ #include #include "usb_cdc.h" -#include "cmd.h" #include "proxmark3.h" #include "apps.h" #include "fpga.h" @@ -936,9 +935,7 @@ void ListenReaderField(int limit) { } -void UsbPacketReceived(uint8_t *packet, int len) { - - UsbCommand *c = (UsbCommand *)packet; +void UsbPacketReceived(UsbCommand *c) { // Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]); @@ -1479,10 +1476,13 @@ void __attribute__((noreturn)) AppMain(void) { LCDInit(); #endif - uint8_t rx[sizeof(UsbCommand)]; - size_t rx_len; - + UsbCommand rx; + for(;;) { + if (cmd_receive(&rx)) { + UsbPacketReceived(&rx); + } + WDT_HIT(); if (usb_poll() && (rx_len = usb_read(rx, sizeof(rx)))) { UsbPacketReceived(rx, rx_len); diff --git a/armsrc/cmd.c b/armsrc/cmd.c deleted file mode 100644 index 71202522..00000000 --- a/armsrc/cmd.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Proxmark send and receive commands - * - * Copyright (c) 2012, Roel Verdult - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the copyright holders nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * @file cmd.c - * @brief - */ - -#include "cmd.h" - -#include -#include -#include -#include "common.h" -#include "usb_cmd.h" -#include "usb_cdc.h" - - -bool cmd_receive(UsbCommand* cmd) { - - // Check if there is a usb packet available - if (!usb_poll()) - return false; - - // Try to retrieve the available command frame - size_t rxlen = usb_read((uint8_t*)cmd, sizeof(UsbCommand)); - - // Check if the transfer was complete - if (rxlen != sizeof(UsbCommand)) - return false; - - // Received command successfully - return true; -} - - -bool cmd_send(uint32_t cmd, uint32_t arg0, uint32_t arg1, uint32_t arg2, void* data, size_t len) { - UsbCommand txcmd; - - for (size_t i = 0; i < sizeof(UsbCommand); i++) { - ((uint8_t*)&txcmd)[i] = 0x00; - } - - // Compose the outgoing command frame - txcmd.cmd = cmd; - txcmd.arg[0] = arg0; - txcmd.arg[1] = arg1; - txcmd.arg[2] = arg2; - - // Add the (optional) content to the frame, with a maximum size of USB_CMD_DATA_SIZE - if (data && len) { - len = MIN(len, USB_CMD_DATA_SIZE); - for (size_t i = 0; i < len; i++) { - txcmd.d.asBytes[i] = ((uint8_t*)data)[i]; - } - } - - // Send frame and make sure all bytes are transmitted - if (usb_write((uint8_t*)&txcmd, sizeof(UsbCommand)) != 0) return false; - - return true; -} diff --git a/armsrc/cmd.h b/armsrc/cmd.h deleted file mode 100644 index 98e13748..00000000 --- a/armsrc/cmd.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Proxmark send and receive commands - * - * Copyright (c) 2010, Roel Verdult - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the copyright holders nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * @file cmd.h - * @brief - */ - -#ifndef PROXMARK_CMD_H__ -#define PROXMARK_CMD_H__ - -#include -#include -#include -#include "usb_cmd.h" - -extern bool cmd_receive(UsbCommand* cmd); -extern bool cmd_send(uint32_t cmd, uint32_t arg0, uint32_t arg1, uint32_t arg2, void* data, size_t len); - -#endif // PROXMARK_CMD_H__ diff --git a/armsrc/epa.c b/armsrc/epa.c index 0e999e1e..ac907f6b 100644 --- a/armsrc/epa.c +++ b/armsrc/epa.c @@ -15,7 +15,7 @@ #include "iso14443a.h" #include "iso14443b.h" #include "epa.h" -#include "cmd.h" +#include "usb_cdc.h" #include "fpgaloader.h" #include "string.h" #include "util.h" diff --git a/armsrc/hfsnoop.c b/armsrc/hfsnoop.c index 2bb7fbce..3a0ac65f 100644 --- a/armsrc/hfsnoop.c +++ b/armsrc/hfsnoop.c @@ -14,8 +14,7 @@ #include "BigBuf.h" #include "util.h" #include "apps.h" -#include "cmd.h" -#include "usb_cdc.h" // for usb_poll_validate_length +#include "usb_cdc.h" #include "fpga.h" #include "fpgaloader.h" diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c index 7cdabefa..688805be 100644 --- a/armsrc/hitag2.c +++ b/armsrc/hitag2.c @@ -19,7 +19,7 @@ #include "hitag2.h" #include "proxmark3.h" -#include "cmd.h" +#include "usb_cdc.h" #include "apps.h" #include "util.h" #include "hitag.h" diff --git a/armsrc/hitagS.c b/armsrc/hitagS.c index e7533da7..8f40146a 100644 --- a/armsrc/hitagS.c +++ b/armsrc/hitagS.c @@ -17,7 +17,7 @@ #include #include "proxmark3.h" #include "apps.h" -#include "cmd.h" +#include "usb_cdc.h" #include "util.h" #include "hitag.h" #include "string.h" diff --git a/armsrc/i2c.c b/armsrc/i2c.c index 30cbddd0..3d16b42c 100644 --- a/armsrc/i2c.c +++ b/armsrc/i2c.c @@ -18,7 +18,7 @@ #include "mifareutil.h" // for MF_DBGLEVEL #include "BigBuf.h" #include "apps.h" -#include "cmd.h" +#include "usb_cdc.h" #ifdef WITH_SMARTCARD #include "smartcard.h" diff --git a/armsrc/iclass.c b/armsrc/iclass.c index 28cfcaa6..1f814609 100644 --- a/armsrc/iclass.c +++ b/armsrc/iclass.c @@ -24,7 +24,7 @@ #include "string.h" #include "printf.h" #include "common.h" -#include "cmd.h" +#include "usb_cdc.h" #include "iso14443a.h" #include "iso15693.h" // Needed for CRC in emulation mode; @@ -34,7 +34,6 @@ #include "iso15693tools.h" #include "protocols.h" #include "optimized_cipher.h" -#include "usb_cdc.h" // for usb_poll_validate_length #include "fpgaloader.h" // iCLASS has a slightly different timing compared to ISO15693. According to the picopass data sheet the tag response is expected 330us after diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index 2d6c3e3b..a24e7a47 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -17,7 +17,7 @@ #include "proxmark3.h" #include "apps.h" #include "util.h" -#include "cmd.h" +#include "usb_cdc.h" #include "iso14443crc.h" #include "crapto1/crapto1.h" #include "mifareutil.h" diff --git a/armsrc/iso14443b.c b/armsrc/iso14443b.c index 5a335e25..0f36c7c7 100644 --- a/armsrc/iso14443b.c +++ b/armsrc/iso14443b.c @@ -14,7 +14,7 @@ #include "proxmark3.h" #include "apps.h" -#include "cmd.h" +#include "usb_cdc.h" #include "util.h" #include "string.h" #include "iso14443crc.h" diff --git a/armsrc/iso15693.c b/armsrc/iso15693.c index 351b0184..9f6516aa 100644 --- a/armsrc/iso15693.c +++ b/armsrc/iso15693.c @@ -58,7 +58,7 @@ #include "string.h" #include "iso15693tools.h" #include "protocols.h" -#include "cmd.h" +#include "usb_cdc.h" #include "BigBuf.h" #include "fpgaloader.h" diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index 3bc09732..71ff0321 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -14,7 +14,7 @@ #include "proxmark3.h" #include "apps.h" -#include "cmd.h" +#include "usb_cdc.h" #include "util.h" #include "string.h" #include "legic_prng.h" diff --git a/armsrc/lfops.c b/armsrc/lfops.c index a1a31f1a..995a8810 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -17,8 +17,7 @@ #include "lfdemod.h" #include "lfsampling.h" #include "protocols.h" -#include "cmd.h" -#include "usb_cdc.h" // for usb_poll_validate_length +#include "usb_cdc.h" #include "fpgaloader.h" /** diff --git a/armsrc/mifarecmd.c b/armsrc/mifarecmd.c index b9032c5f..e30a5639 100644 --- a/armsrc/mifarecmd.c +++ b/armsrc/mifarecmd.c @@ -18,7 +18,7 @@ #include #include "proxmark3.h" -#include "cmd.h" +#include "usb_cdc.h" #include "crapto1/crapto1.h" #include "iso14443a.h" #include "BigBuf.h" diff --git a/armsrc/mifaresim.c b/armsrc/mifaresim.c index 891e0daf..b63160c9 100644 --- a/armsrc/mifaresim.c +++ b/armsrc/mifaresim.c @@ -20,7 +20,6 @@ #include "fpgaloader.h" #include "proxmark3.h" #include "usb_cdc.h" -#include "cmd.h" #include "protocols.h" #include "apps.h" diff --git a/armsrc/mifaresniff.c b/armsrc/mifaresniff.c index 4dbcd904..b867c582 100644 --- a/armsrc/mifaresniff.c +++ b/armsrc/mifaresniff.c @@ -18,7 +18,7 @@ #include "crapto1/crapto1.h" #include "mifareutil.h" #include "common.h" -#include "cmd.h" +#include "usb_cdc.h" #include "BigBuf.h" #include "fpgaloader.h" diff --git a/armsrc/pcf7931.c b/armsrc/pcf7931.c index b0f8e4a3..2fae74cc 100644 --- a/armsrc/pcf7931.c +++ b/armsrc/pcf7931.c @@ -1,6 +1,6 @@ #include "proxmark3.h" #include "apps.h" -#include "cmd.h" +#include "usb_cdc.h" #include "lfsampling.h" #include "pcf7931.h" #include "util.h" diff --git a/armsrc/usb_cdc.c b/armsrc/usb_cdc.c deleted file mode 100644 index 269d71d7..00000000 --- a/armsrc/usb_cdc.c +++ /dev/null @@ -1,684 +0,0 @@ -/* - * at91sam7s USB CDC device implementation - * - * Copyright (c) 2012, Roel Verdult - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the copyright holders nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * based on the "Basic USB Example" from ATMEL (doc6123.pdf) - * - * @file usb_cdc.c - * @brief - */ - -#include "usb_cdc.h" - -#include -#include -#include - -#include "common.h" -#include "at91sam7s512.h" -#include "config_gpio.h" - -#define AT91C_EP_CONTROL 0 -#define AT91C_EP_OUT 1 -#define AT91C_EP_IN 2 -#define AT91C_EP_NOTIFY 3 -#define AT91C_EP_OUT_SIZE 0x40 -#define AT91C_EP_IN_SIZE 0x40 - -// Language must always be 0. -#define STR_LANGUAGE_CODES 0x00 -#define STR_MANUFACTURER 0x01 -#define STR_PRODUCT 0x02 - - -static const char devDescriptor[] = { - /* Device descriptor */ - 0x12, // bLength - 0x01, // bDescriptorType - 0x00,0x02, // Complies with USB Spec. Release (0200h = release 2.0) - 0x02, // bDeviceClass: (Communication Device Class) - 0x00, // bDeviceSubclass: (unused at this time) - 0x00, // bDeviceProtocol: (unused at this time) - 0x08, // bMaxPacketSize0 - 0xc4,0x9a, // Vendor ID (0x9ac4 = J. Westhues) - 0x8f,0x4b, // Product ID (0x4b8f = Proxmark-3 RFID Instrument) - 0x01,0x00, // Device release number (0001) - STR_MANUFACTURER, // iManufacturer - STR_PRODUCT, // iProduct - 0x00, // iSerialNumber - 0x01 // bNumConfigs -}; - - -static const char cfgDescriptor[] = { - /* ============== CONFIGURATION 1 =========== */ - /* Configuration 1 descriptor */ - 0x09, // CbLength - 0x02, // CbDescriptorType - 0x43, // CwTotalLength 2 EP + Control - 0x00, - 0x02, // CbNumInterfaces - 0x01, // CbConfigurationValue - 0x00, // CiConfiguration - 0x80, // CbmAttributes (Bus Powered) - 0x4B, // CMaxPower (150mA max current drawn from bus) - - /* Interface 0 Descriptor: Communication Class Interface */ - 0x09, // bLength - 0x04, // bDescriptorType - 0x00, // bInterfaceNumber - 0x00, // bAlternateSetting - 0x01, // bNumEndpoints - 0x02, // bInterfaceClass: Communication Interface Class - 0x02, // bInterfaceSubclass: Abstract Control Model - 0x01, // bInterfaceProtocol: Common AT Commands, V.25ter - 0x00, // iInterface - - /* Header Functional Descriptor */ - 0x05, // bFunction Length - 0x24, // bDescriptor type: CS_INTERFACE - 0x00, // bDescriptor subtype: Header Functional Descriptor - 0x10, // bcdCDC:1.1 - 0x01, - - /* ACM Functional Descriptor */ - 0x04, // bFunctionLength - 0x24, // bDescriptor Type: CS_INTERFACE - 0x02, // bDescriptor Subtype: Abstract Control Management Functional Descriptor - 0x02, // bmCapabilities: D1: Device supports the request combination of Set_Line_Coding, Set_Control_Line_State, Get_Line_Coding, and the notification Serial_State - - /* Union Functional Descriptor */ - 0x05, // bFunctionLength - 0x24, // bDescriptorType: CS_INTERFACE - 0x06, // bDescriptor Subtype: Union Functional Descriptor - 0x00, // bMasterInterface: Communication Class Interface - 0x01, // bSlaveInterface0: Data Class Interface - - /* Call Management Functional Descriptor */ - 0x05, // bFunctionLength - 0x24, // bDescriptor Type: CS_INTERFACE - 0x01, // bDescriptor Subtype: Call Management Functional Descriptor - 0x00, // bmCapabilities: Device sends/receives call management information only over the Communication Class interface. Device does not handle call management itself - 0x01, // bDataInterface: Data Class Interface 1 - - /* Endpoint 1 descriptor */ - 0x07, // bLength - 0x05, // bDescriptorType - 0x83, // bEndpointAddress: Endpoint 03 - IN - 0x03, // bmAttributes: INT - 0x08, // wMaxPacketSize: 8 - 0x00, - 0xFF, // bInterval - - /* Interface 1 Descriptor: Data Class Interface */ - 0x09, // bLength - 0x04, // bDescriptorType - 0x01, // bInterfaceNumber - 0x00, // bAlternateSetting - 0x02, // bNumEndpoints - 0x0A, // bInterfaceClass: Data Interface Class - 0x00, // bInterfaceSubclass: not used - 0x00, // bInterfaceProtocol: No class specific protocol required) - 0x00, // iInterface - - /* Endpoint 1 descriptor */ - 0x07, // bLength - 0x05, // bDescriptorType - 0x01, // bEndpointAddress: Endpoint 01 - OUT - 0x02, // bmAttributes: BULK - AT91C_EP_OUT_SIZE, // wMaxPacketSize - 0x00, - 0x00, // bInterval - - /* Endpoint 2 descriptor */ - 0x07, // bLength - 0x05, // bDescriptorType - 0x82, // bEndpointAddress: Endpoint 02 - IN - 0x02, // bmAttributes: BULK - AT91C_EP_IN_SIZE, // wMaxPacketSize - 0x00, - 0x00 // bInterval -}; - - -static const char StrDescLanguageCodes[] = { - 4, // Length - 0x03, // Type is string - 0x09, 0x04 // supported language Code 0 = 0x0409 (English) -}; - - -// Note: ModemManager (Linux) ignores Proxmark3 devices by matching the -// manufacturer string "proxmark.org". Don't change this. -static const char StrDescManufacturer[] = { - 26, // Length - 0x03, // Type is string - 'p', 0x00, - 'r', 0x00, - 'o', 0x00, - 'x', 0x00, - 'm', 0x00, - 'a', 0x00, - 'r', 0x00, - 'k', 0x00, - '.', 0x00, - 'o', 0x00, - 'r', 0x00, - 'g', 0x00 -}; - - -static const char StrDescProduct[] = { - 20, // Length - 0x03, // Type is string - 'p', 0x00, - 'r', 0x00, - 'o', 0x00, - 'x', 0x00, - 'm', 0x00, - 'a', 0x00, - 'r', 0x00, - 'k', 0x00, - '3', 0x00 -}; - - -const char* getStringDescriptor(uint8_t idx) { - switch (idx) { - case STR_LANGUAGE_CODES: - return StrDescLanguageCodes; - case STR_MANUFACTURER: - return StrDescManufacturer; - case STR_PRODUCT: - return StrDescProduct; - default: - return NULL; - } -} - - -// Bitmap for all status bits in CSR which must be written as 1 to cause no effect -#define REG_NO_EFFECT_1_ALL AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \ - |AT91C_UDP_STALLSENT | AT91C_UDP_RXSETUP \ - |AT91C_UDP_TXCOMP - - -// Clear flags in the UDP_CSR register -#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \ - volatile unsigned int reg; \ - reg = pUdp->UDP_CSR[(endpoint)]; \ - reg |= REG_NO_EFFECT_1_ALL; \ - reg &= ~(flags); \ - pUdp->UDP_CSR[(endpoint)] = reg; \ -} - - -// Set flags in the UDP_CSR register -#define UDP_SET_EP_FLAGS(endpoint, flags) { \ - volatile unsigned int reg; \ - reg = pUdp->UDP_CSR[(endpoint)]; \ - reg |= REG_NO_EFFECT_1_ALL; \ - reg |= (flags); \ - pUdp->UDP_CSR[(endpoint)] = reg; \ -} - - -/* USB standard request codes */ -#define STD_GET_STATUS_ZERO 0x0080 -#define STD_GET_STATUS_INTERFACE 0x0081 -#define STD_GET_STATUS_ENDPOINT 0x0082 - -#define STD_CLEAR_FEATURE_ZERO 0x0100 -#define STD_CLEAR_FEATURE_INTERFACE 0x0101 -#define STD_CLEAR_FEATURE_ENDPOINT 0x0102 - -#define STD_SET_FEATURE_ZERO 0x0300 -#define STD_SET_FEATURE_INTERFACE 0x0301 -#define STD_SET_FEATURE_ENDPOINT 0x0302 - -#define STD_SET_ADDRESS 0x0500 -#define STD_GET_DESCRIPTOR 0x0680 -#define STD_SET_DESCRIPTOR 0x0700 -#define STD_GET_CONFIGURATION 0x0880 -#define STD_SET_CONFIGURATION 0x0900 -#define STD_GET_INTERFACE 0x0A81 -#define STD_SET_INTERFACE 0x0B01 -#define STD_SYNCH_FRAME 0x0C82 - -/* CDC Class Specific Request Code */ -#define GET_LINE_CODING 0x21A1 -#define SET_LINE_CODING 0x2021 -#define SET_CONTROL_LINE_STATE 0x2221 - - -typedef struct { - unsigned int dwDTERRate; - char bCharFormat; - char bParityType; - char bDataBits; -} AT91S_CDC_LINE_CODING, *AT91PS_CDC_LINE_CODING; - - -AT91S_CDC_LINE_CODING line = { - 115200, // baudrate - 0, // 1 Stop Bit - 0, // None Parity - 8}; // 8 Data bits - - -void AT91F_CDC_Enumerate(); - -AT91PS_UDP pUdp = AT91C_BASE_UDP; -uint8_t btConfiguration = 0; -uint8_t btConnection = 0; -uint8_t btReceiveBank = AT91C_UDP_RX_DATA_BK0; - - -//*---------------------------------------------------------------------------- -//* \fn usb_disable -//* \brief This function deactivates the USB device -//*---------------------------------------------------------------------------- -void usb_disable() { - // Disconnect the USB device - AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU; - - // Clear all lingering interrupts - if (pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) { - pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; - } -} - - -//*---------------------------------------------------------------------------- -//* \fn usb_enable -//* \brief This function Activates the USB device -//*---------------------------------------------------------------------------- -void usb_enable() { - // Set the PLL USB Divider - AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ; - - // Specific Chip USB Initialisation - // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP; - AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP); - - // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO - // Set in PIO mode and Configure in Output - AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode - AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output - - // Clear for set the Pullup resistor - AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU; - - // Disconnect and reconnect USB controller for 100ms - usb_disable(); - - // Wait for a short while - for (volatile size_t i = 0; i < 0x100000; i++); - - // Reconnect USB reconnect - AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU; - AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; -} - - -//*---------------------------------------------------------------------------- -//* \fn usb_check -//* \brief Test if the device is configured and handle enumeration -//*---------------------------------------------------------------------------- -bool usb_check() { - AT91_REG isr = pUdp->UDP_ISR; - - if (isr & AT91C_UDP_ENDBUSRES) { - pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; - // reset all endpoints - pUdp->UDP_RSTEP = (unsigned int)-1; - pUdp->UDP_RSTEP = 0; - // Enable the function - pUdp->UDP_FADDR = AT91C_UDP_FEN; - // Configure endpoint 0 - pUdp->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); - } else if (isr & AT91C_UDP_EPINT0) { - pUdp->UDP_ICR = AT91C_UDP_EPINT0; - AT91F_CDC_Enumerate(); - } - return (btConfiguration) ? true : false; -} - - -bool usb_poll() { - if (!usb_check()) return false; - return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank); -} - - -/** - In github PR #129, some users appears to get a false positive from - usb_poll, which returns true, but the usb_read operation - still returns 0. - This check is basically the same as above, but also checks - that the length available to read is non-zero, thus hopefully fixes the - bug. -**/ -bool usb_poll_validate_length() { - if (!usb_check()) return false; - if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false; - return (pUdp->UDP_CSR[AT91C_EP_OUT] >> 16) > 0; -} - - -//*---------------------------------------------------------------------------- -//* \fn usb_read -//* \brief Read available data from Endpoint OUT -//*---------------------------------------------------------------------------- -uint32_t usb_read(uint8_t* data, size_t len) { - uint8_t bank = btReceiveBank; - uint32_t packetSize, nbBytesRcv = 0; - uint32_t time_out = 0; - - while (len) { - if (!usb_check()) break; - - if ( pUdp->UDP_CSR[AT91C_EP_OUT] & bank ) { - packetSize = MIN(pUdp->UDP_CSR[AT91C_EP_OUT] >> 16, len); - len -= packetSize; - while (packetSize--) - data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT]; - UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank); - if (bank == AT91C_UDP_RX_DATA_BK0) { - bank = AT91C_UDP_RX_DATA_BK1; - } else { - bank = AT91C_UDP_RX_DATA_BK0; - } - } - if (time_out++ == 0x1fff) break; - } - - btReceiveBank = bank; - return nbBytesRcv; -} - - -//*---------------------------------------------------------------------------- -//* \fn usb_write -//* \brief Send through endpoint 2 -//*---------------------------------------------------------------------------- -uint32_t usb_write(const uint8_t* data, const size_t len) { - size_t length = len; - uint32_t cpt = 0; - - if (!length) return 0; - if (!usb_check()) return 0; - - // Send the first packet - cpt = MIN(length, AT91C_EP_IN_SIZE); - length -= cpt; - while (cpt--) { - pUdp->UDP_FDR[AT91C_EP_IN] = *data++; - } - UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); - - while (length) { - // Fill the next bank - cpt = MIN(length, AT91C_EP_IN_SIZE); - length -= cpt; - while (cpt--) { - pUdp->UDP_FDR[AT91C_EP_IN] = *data++; - } - // Wait for the previous bank to be sent - while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { - if (!usb_check()) return length; - } - UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) - /* wait */; - UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); - } - - // Wait for the end of transfer - while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { - if (!usb_check()) return length; - } - - UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) - /* wait */; - - return length; -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_USB_SendData -//* \brief Send Data through the control endpoint -//*---------------------------------------------------------------------------- -unsigned int csrTab[100] = {0x00}; -unsigned char csrIdx = 0; - -static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t length) { - uint32_t cpt = 0; - AT91_REG csr; - - do { - cpt = MIN(length, 8); - length -= cpt; - - while (cpt--) - pUdp->UDP_FDR[0] = *pData++; - - if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) - /* wait */; - } - - UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); - do { - csr = pUdp->UDP_CSR[AT91C_EP_CONTROL]; - - // Data IN stage has been stopped by a status OUT - if (csr & AT91C_UDP_RX_DATA_BK0) { - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); - return; - } - } while (!(csr & AT91C_UDP_TXCOMP)); - - } while (length); - - if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) - /* wait */; - } -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_USB_SendZlp -//* \brief Send zero length packet through the control endpoint -//*---------------------------------------------------------------------------- -void AT91F_USB_SendZlp(AT91PS_UDP pUdp) { - UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); - while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP)) - /* wait */; - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); - while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) - /* wait */; -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_USB_SendStall -//* \brief Stall the control endpoint -//*---------------------------------------------------------------------------- -void AT91F_USB_SendStall(AT91PS_UDP pUdp) { - UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL); - while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR)) - /* wait */; - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR); - while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)) - /* wait */; -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_CDC_Enumerate -//* \brief This function is a callback invoked when a SETUP packet is received -//*---------------------------------------------------------------------------- -void AT91F_CDC_Enumerate() { - uint8_t bmRequestType, bRequest; - uint16_t wValue, wIndex, wLength, wStatus; - - if (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP)) - return; - - bmRequestType = pUdp->UDP_FDR[AT91C_EP_CONTROL]; - bRequest = pUdp->UDP_FDR[AT91C_EP_CONTROL]; - wValue = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); - wValue |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); - wIndex = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); - wIndex |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); - wLength = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); - wLength |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); - - if (bmRequestType & 0x80) { // Data Phase Transfer Direction Device to Host - UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR); - while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR)) - /* wait */; - } - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP); - while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) - /* wait */; - - // Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1 - switch ((bRequest << 8) | bmRequestType) { - case STD_GET_DESCRIPTOR: - if (wValue == 0x100) // Return Device Descriptor - AT91F_USB_SendData(pUdp, devDescriptor, MIN(sizeof(devDescriptor), wLength)); - else if (wValue == 0x200) // Return Configuration Descriptor - AT91F_USB_SendData(pUdp, cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength)); - else if ((wValue & 0xF00) == 0x300) { // Return String Descriptor - const char *strDescriptor = getStringDescriptor(wValue & 0xff); - if (strDescriptor != NULL) { - AT91F_USB_SendData(pUdp, strDescriptor, MIN(strDescriptor[0], wLength)); - } else { - AT91F_USB_SendStall(pUdp); - } - } - else - AT91F_USB_SendStall(pUdp); - break; - case STD_SET_ADDRESS: - AT91F_USB_SendZlp(pUdp); - pUdp->UDP_FADDR = (AT91C_UDP_FEN | wValue); - pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0; - break; - case STD_SET_CONFIGURATION: - btConfiguration = wValue; - AT91F_USB_SendZlp(pUdp); - pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN; - pUdp->UDP_CSR[AT91C_EP_OUT] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0; - pUdp->UDP_CSR[AT91C_EP_IN] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; - pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; - break; - case STD_GET_CONFIGURATION: - AT91F_USB_SendData(pUdp, (char *) &(btConfiguration), sizeof(btConfiguration)); - break; - case STD_GET_STATUS_ZERO: - wStatus = 0; // Device is Bus powered, remote wakeup disabled - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); - break; - case STD_GET_STATUS_INTERFACE: - wStatus = 0; // reserved for future use - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); - break; - case STD_GET_STATUS_ENDPOINT: - wStatus = 0; - wIndex &= 0x0F; - if ((pUdp->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= AT91C_EP_NOTIFY)) { - wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); - } else if ((pUdp->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == AT91C_EP_CONTROL)) { - wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; - AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); - } else - AT91F_USB_SendStall(pUdp); - break; - case STD_SET_FEATURE_ZERO: - AT91F_USB_SendStall(pUdp); - break; - case STD_SET_FEATURE_INTERFACE: - AT91F_USB_SendZlp(pUdp); - break; - case STD_SET_FEATURE_ENDPOINT: - wIndex &= 0x0F; - if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { - pUdp->UDP_CSR[wIndex] = 0; - AT91F_USB_SendZlp(pUdp); - } else - AT91F_USB_SendStall(pUdp); - break; - case STD_CLEAR_FEATURE_ZERO: - AT91F_USB_SendStall(pUdp); - break; - case STD_CLEAR_FEATURE_INTERFACE: - AT91F_USB_SendZlp(pUdp); - break; - case STD_CLEAR_FEATURE_ENDPOINT: - wIndex &= 0x0F; - if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { - if (wIndex == AT91C_EP_OUT) - pUdp->UDP_CSR[AT91C_EP_OUT] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT); - else if (wIndex == AT91C_EP_IN) - pUdp->UDP_CSR[AT91C_EP_IN] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN); - else if (wIndex == AT91C_EP_NOTIFY) - pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN); - AT91F_USB_SendZlp(pUdp); - } - else - AT91F_USB_SendStall(pUdp); - break; - - // handle CDC class requests - case SET_LINE_CODING: - while ( (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0)) - /* wait */; - UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); - AT91F_USB_SendZlp(pUdp); - break; - case GET_LINE_CODING: - AT91F_USB_SendData(pUdp, (char *) &line, MIN(sizeof(line), wLength)); - break; - case SET_CONTROL_LINE_STATE: - btConnection = wValue; - AT91F_USB_SendZlp(pUdp); - break; - default: - AT91F_USB_SendStall(pUdp); - break; - } -} diff --git a/armsrc/usb_cdc.h b/armsrc/usb_cdc.h deleted file mode 100644 index 085b9844..00000000 --- a/armsrc/usb_cdc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * at91sam7s USB CDC device implementation - * - * Copyright (c) 2012, Roel Verdult - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the copyright holders nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * based on the "Basic USB Example" from ATMEL (doc6123.pdf) - * - * @file usb_cdc.c - * @brief - */ - -#ifndef USB_CDC_H__ -#define USB_CDC_H__ - -#include -#include -#include - -extern void usb_disable(); -extern void usb_enable(); -extern bool usb_check(); -extern bool usb_poll(); -extern bool usb_poll_validate_length(); -extern uint32_t usb_read(uint8_t* data, size_t len); -extern uint32_t usb_write(const uint8_t* data, const size_t len); - -#endif // _USB_CDC_H__ diff --git a/bootrom/Makefile b/bootrom/Makefile index dd1e7e08..b1e2e6cd 100644 --- a/bootrom/Makefile +++ b/bootrom/Makefile @@ -8,7 +8,7 @@ # DO NOT use thumb mode in the phase 1 bootloader since that generates a section with glue code ARMSRC = -THUMBSRC = cmd.c usb_cdc.c bootrom.c +THUMBSRC = usb_cdc.c bootrom.c ASMSRC = ram-reset.s flash-reset.s VERSIONSRC = version.c diff --git a/bootrom/bootrom.c b/bootrom/bootrom.c index bbea07b5..b2500821 100644 --- a/bootrom/bootrom.c +++ b/bootrom/bootrom.c @@ -6,17 +6,15 @@ // Main code for the bootloader //----------------------------------------------------------------------------- -#include +#include "proxmark3.h" #include "usb_cdc.h" -#include "cmd.h" -//#include "usb_hid.h" void DbpString(char *str) { - byte_t len = 0; + uint8_t len = 0; while (str[len] != 0x00) { len++; } - cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len); + cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(uint8_t*)str,len); } struct common_area common_area __attribute__((section(".commonarea"))); @@ -89,15 +87,10 @@ static void Fatal(void) for(;;); } -void UsbPacketReceived(uint8_t *packet, int len) { +void UsbPacketReceived(UsbCommand *c) { int i, dont_ack=0; - UsbCommand* c = (UsbCommand *)packet; volatile uint32_t *p; - if(len != sizeof(UsbCommand)) { - Fatal(); - } - uint32_t arg0 = (uint32_t)c->arg[0]; switch(c->cmd) { @@ -199,21 +192,17 @@ static void flash_mode(int externally_entered) start_addr = 0; end_addr = 0; bootrom_unlocked = 0; - byte_t rx[sizeof(UsbCommand)]; - size_t rx_len; + UsbCommand rx; - usb_enable(); - for (volatile size_t i=0; i<0x100000; i++) {}; + usb_enable(); + for (volatile size_t i=0; i<0x100000; i++) {}; for(;;) { WDT_HIT(); - if (usb_poll()) { - rx_len = usb_read(rx,sizeof(UsbCommand)); - if (rx_len) { - UsbPacketReceived(rx,rx_len); - } - } + if (cmd_receive(&rx)) { + UsbPacketReceived(&rx); + } if(!externally_entered && !BUTTON_PRESS()) { /* Perform a reset to leave flash mode */ diff --git a/common/usb_cdc.c b/common/usb_cdc.c new file mode 100644 index 00000000..66b02e78 --- /dev/null +++ b/common/usb_cdc.c @@ -0,0 +1,733 @@ +/* + * at91sam7s USB CDC device implementation + * + * Copyright (c) 2012, Roel Verdult + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the copyright holders nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * based on the "Basic USB Example" from ATMEL (doc6123.pdf) + * + * @file usb_cdc.c + * @brief + */ + +#include "usb_cdc.h" + +#include +#include +#include + +#include "common.h" +#include "at91sam7s512.h" +#include "config_gpio.h" + +#define AT91C_EP_CONTROL 0 +#define AT91C_EP_OUT 1 +#define AT91C_EP_IN 2 +#define AT91C_EP_NOTIFY 3 +#define AT91C_EP_OUT_SIZE 0x40 +#define AT91C_EP_IN_SIZE 0x40 + +// Language must always be 0. +#define STR_LANGUAGE_CODES 0x00 +#define STR_MANUFACTURER 0x01 +#define STR_PRODUCT 0x02 + + +static const char devDescriptor[] = { + /* Device descriptor */ + 0x12, // bLength + 0x01, // bDescriptorType + 0x00,0x02, // Complies with USB Spec. Release (0200h = release 2.0) + 0x02, // bDeviceClass: (Communication Device Class) + 0x00, // bDeviceSubclass: (unused at this time) + 0x00, // bDeviceProtocol: (unused at this time) + 0x08, // bMaxPacketSize0 + 0xc4,0x9a, // Vendor ID (0x9ac4 = J. Westhues) + 0x8f,0x4b, // Product ID (0x4b8f = Proxmark-3 RFID Instrument) + 0x01,0x00, // Device release number (0001) + STR_MANUFACTURER, // iManufacturer + STR_PRODUCT, // iProduct + 0x00, // iSerialNumber + 0x01 // bNumConfigs +}; + + +static const char cfgDescriptor[] = { + /* ============== CONFIGURATION 1 =========== */ + /* Configuration 1 descriptor */ + 0x09, // CbLength + 0x02, // CbDescriptorType + 0x43, // CwTotalLength 2 EP + Control + 0x00, + 0x02, // CbNumInterfaces + 0x01, // CbConfigurationValue + 0x00, // CiConfiguration + 0x80, // CbmAttributes (Bus Powered) + 0x4B, // CMaxPower (150mA max current drawn from bus) + + /* Interface 0 Descriptor: Communication Class Interface */ + 0x09, // bLength + 0x04, // bDescriptorType + 0x00, // bInterfaceNumber + 0x00, // bAlternateSetting + 0x01, // bNumEndpoints + 0x02, // bInterfaceClass: Communication Interface Class + 0x02, // bInterfaceSubclass: Abstract Control Model + 0x01, // bInterfaceProtocol: Common AT Commands, V.25ter + 0x00, // iInterface + + /* Header Functional Descriptor */ + 0x05, // bFunction Length + 0x24, // bDescriptor type: CS_INTERFACE + 0x00, // bDescriptor subtype: Header Functional Descriptor + 0x10, // bcdCDC:1.1 + 0x01, + + /* ACM Functional Descriptor */ + 0x04, // bFunctionLength + 0x24, // bDescriptor Type: CS_INTERFACE + 0x02, // bDescriptor Subtype: Abstract Control Management Functional Descriptor + 0x02, // bmCapabilities: D1: Device supports the request combination of Set_Line_Coding, Set_Control_Line_State, Get_Line_Coding, and the notification Serial_State + + /* Union Functional Descriptor */ + 0x05, // bFunctionLength + 0x24, // bDescriptorType: CS_INTERFACE + 0x06, // bDescriptor Subtype: Union Functional Descriptor + 0x00, // bMasterInterface: Communication Class Interface + 0x01, // bSlaveInterface0: Data Class Interface + + /* Call Management Functional Descriptor */ + 0x05, // bFunctionLength + 0x24, // bDescriptor Type: CS_INTERFACE + 0x01, // bDescriptor Subtype: Call Management Functional Descriptor + 0x00, // bmCapabilities: Device sends/receives call management information only over the Communication Class interface. Device does not handle call management itself + 0x01, // bDataInterface: Data Class Interface 1 + + /* Endpoint 1 descriptor */ + 0x07, // bLength + 0x05, // bDescriptorType + 0x83, // bEndpointAddress: Endpoint 03 - IN + 0x03, // bmAttributes: INT + 0x08, // wMaxPacketSize: 8 + 0x00, + 0xFF, // bInterval + + /* Interface 1 Descriptor: Data Class Interface */ + 0x09, // bLength + 0x04, // bDescriptorType + 0x01, // bInterfaceNumber + 0x00, // bAlternateSetting + 0x02, // bNumEndpoints + 0x0A, // bInterfaceClass: Data Interface Class + 0x00, // bInterfaceSubclass: not used + 0x00, // bInterfaceProtocol: No class specific protocol required) + 0x00, // iInterface + + /* Endpoint 1 descriptor */ + 0x07, // bLength + 0x05, // bDescriptorType + 0x01, // bEndpointAddress: Endpoint 01 - OUT + 0x02, // bmAttributes: BULK + AT91C_EP_OUT_SIZE, // wMaxPacketSize + 0x00, + 0x00, // bInterval + + /* Endpoint 2 descriptor */ + 0x07, // bLength + 0x05, // bDescriptorType + 0x82, // bEndpointAddress: Endpoint 02 - IN + 0x02, // bmAttributes: BULK + AT91C_EP_IN_SIZE, // wMaxPacketSize + 0x00, + 0x00 // bInterval +}; + + +static const char StrDescLanguageCodes[] = { + 4, // Length + 0x03, // Type is string + 0x09, 0x04 // supported language Code 0 = 0x0409 (English) +}; + + +// Note: ModemManager (Linux) ignores Proxmark3 devices by matching the +// manufacturer string "proxmark.org". Don't change this. +static const char StrDescManufacturer[] = { + 26, // Length + 0x03, // Type is string + 'p', 0x00, + 'r', 0x00, + 'o', 0x00, + 'x', 0x00, + 'm', 0x00, + 'a', 0x00, + 'r', 0x00, + 'k', 0x00, + '.', 0x00, + 'o', 0x00, + 'r', 0x00, + 'g', 0x00 +}; + + +static const char StrDescProduct[] = { + 20, // Length + 0x03, // Type is string + 'p', 0x00, + 'r', 0x00, + 'o', 0x00, + 'x', 0x00, + 'm', 0x00, + 'a', 0x00, + 'r', 0x00, + 'k', 0x00, + '3', 0x00 +}; + + +static const char* getStringDescriptor(uint8_t idx) { + switch (idx) { + case STR_LANGUAGE_CODES: + return StrDescLanguageCodes; + case STR_MANUFACTURER: + return StrDescManufacturer; + case STR_PRODUCT: + return StrDescProduct; + default: + return NULL; + } +} + + +// Bitmap for all status bits in CSR which must be written as 1 to cause no effect +#define REG_NO_EFFECT_1_ALL AT91C_UDP_RX_DATA_BK0 | AT91C_UDP_RX_DATA_BK1 \ + |AT91C_UDP_STALLSENT | AT91C_UDP_RXSETUP \ + |AT91C_UDP_TXCOMP + + +// Clear flags in the UDP_CSR register +#define UDP_CLEAR_EP_FLAGS(endpoint, flags) { \ + volatile unsigned int reg; \ + reg = pUdp->UDP_CSR[(endpoint)]; \ + reg |= REG_NO_EFFECT_1_ALL; \ + reg &= ~(flags); \ + pUdp->UDP_CSR[(endpoint)] = reg; \ +} + + +// Set flags in the UDP_CSR register +#define UDP_SET_EP_FLAGS(endpoint, flags) { \ + volatile unsigned int reg; \ + reg = pUdp->UDP_CSR[(endpoint)]; \ + reg |= REG_NO_EFFECT_1_ALL; \ + reg |= (flags); \ + pUdp->UDP_CSR[(endpoint)] = reg; \ +} + + +/* USB standard request codes */ +#define STD_GET_STATUS_ZERO 0x0080 +#define STD_GET_STATUS_INTERFACE 0x0081 +#define STD_GET_STATUS_ENDPOINT 0x0082 + +#define STD_CLEAR_FEATURE_ZERO 0x0100 +#define STD_CLEAR_FEATURE_INTERFACE 0x0101 +#define STD_CLEAR_FEATURE_ENDPOINT 0x0102 + +#define STD_SET_FEATURE_ZERO 0x0300 +#define STD_SET_FEATURE_INTERFACE 0x0301 +#define STD_SET_FEATURE_ENDPOINT 0x0302 + +#define STD_SET_ADDRESS 0x0500 +#define STD_GET_DESCRIPTOR 0x0680 +#define STD_SET_DESCRIPTOR 0x0700 +#define STD_GET_CONFIGURATION 0x0880 +#define STD_SET_CONFIGURATION 0x0900 +#define STD_GET_INTERFACE 0x0A81 +#define STD_SET_INTERFACE 0x0B01 +#define STD_SYNCH_FRAME 0x0C82 + +/* CDC Class Specific Request Code */ +#define GET_LINE_CODING 0x21A1 +#define SET_LINE_CODING 0x2021 +#define SET_CONTROL_LINE_STATE 0x2221 + + +typedef struct { + unsigned int dwDTERRate; + char bCharFormat; + char bParityType; + char bDataBits; +} AT91S_CDC_LINE_CODING, *AT91PS_CDC_LINE_CODING; + + +AT91S_CDC_LINE_CODING line = { + 115200, // baudrate + 0, // 1 Stop Bit + 0, // None Parity + 8}; // 8 Data bits + + +static void AT91F_CDC_Enumerate(); + +AT91PS_UDP pUdp = AT91C_BASE_UDP; +uint8_t btConfiguration = 0; +uint8_t btConnection = 0; +uint8_t btReceiveBank = AT91C_UDP_RX_DATA_BK0; + + +//*---------------------------------------------------------------------------- +//* \fn usb_disable +//* \brief This function deactivates the USB device +//*---------------------------------------------------------------------------- +void usb_disable() { + // Disconnect the USB device + AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU; + + // Clear all lingering interrupts + if (pUdp->UDP_ISR & AT91C_UDP_ENDBUSRES) { + pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; + } +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_enable +//* \brief This function Activates the USB device +//*---------------------------------------------------------------------------- +void usb_enable() { + // Set the PLL USB Divider + AT91C_BASE_CKGR->CKGR_PLLR |= AT91C_CKGR_USBDIV_1 ; + + // Specific Chip USB Initialisation + // Enables the 48MHz USB clock UDPCK and System Peripheral USB Clock + AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UDP; + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_UDP); + + // Enable UDP PullUp (USB_DP_PUP) : enable & Clear of the corresponding PIO + // Set in PIO mode and Configure in Output + AT91C_BASE_PIOA->PIO_PER = GPIO_USB_PU; // Set in PIO mode + AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; // Configure as Output + + // Clear for set the Pullup resistor + AT91C_BASE_PIOA->PIO_CODR = GPIO_USB_PU; + + // Disconnect and reconnect USB controller for 100ms + usb_disable(); + + // Wait for a short while + for (volatile size_t i = 0; i < 0x100000; i++); + + // Reconnect USB reconnect + AT91C_BASE_PIOA->PIO_SODR = GPIO_USB_PU; + AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_check +//* \brief Test if the device is configured and handle enumeration +//*---------------------------------------------------------------------------- +static bool usb_check() { + AT91_REG isr = pUdp->UDP_ISR; + + if (isr & AT91C_UDP_ENDBUSRES) { + pUdp->UDP_ICR = AT91C_UDP_ENDBUSRES; + // reset all endpoints + pUdp->UDP_RSTEP = (unsigned int)-1; + pUdp->UDP_RSTEP = 0; + // Enable the function + pUdp->UDP_FADDR = AT91C_UDP_FEN; + // Configure endpoint 0 + pUdp->UDP_CSR[AT91C_EP_CONTROL] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_CTRL); + } else if (isr & AT91C_UDP_EPINT0) { + pUdp->UDP_ICR = AT91C_UDP_EPINT0; + AT91F_CDC_Enumerate(); + } + return (btConfiguration) ? true : false; +} + + +bool usb_poll() { + if (!usb_check()) return false; + return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank); +} + + +/** + In github PR #129, some users appears to get a false positive from + usb_poll, which returns true, but the usb_read operation + still returns 0. + This check is basically the same as above, but also checks + that the length available to read is non-zero, thus hopefully fixes the + bug. +**/ +bool usb_poll_validate_length() { + if (!usb_check()) return false; + if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false; + return (pUdp->UDP_CSR[AT91C_EP_OUT] >> 16) > 0; +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_read +//* \brief Read available data from Endpoint OUT +//*---------------------------------------------------------------------------- +static uint32_t usb_read(uint8_t* data, size_t len) { + uint8_t bank = btReceiveBank; + uint32_t packetSize, nbBytesRcv = 0; + uint32_t time_out = 0; + + while (len) { + if (!usb_check()) break; + + if ( pUdp->UDP_CSR[AT91C_EP_OUT] & bank ) { + packetSize = MIN(pUdp->UDP_CSR[AT91C_EP_OUT] >> 16, len); + len -= packetSize; + while (packetSize--) + data[nbBytesRcv++] = pUdp->UDP_FDR[AT91C_EP_OUT]; + UDP_CLEAR_EP_FLAGS(AT91C_EP_OUT, bank); + if (bank == AT91C_UDP_RX_DATA_BK0) { + bank = AT91C_UDP_RX_DATA_BK1; + } else { + bank = AT91C_UDP_RX_DATA_BK0; + } + } + if (time_out++ == 0x1fff) break; + } + + btReceiveBank = bank; + return nbBytesRcv; +} + + +//*---------------------------------------------------------------------------- +//* \fn usb_write +//* \brief Send through endpoint 2 +//*---------------------------------------------------------------------------- +static uint32_t usb_write(const uint8_t* data, const size_t len) { + size_t length = len; + uint32_t cpt = 0; + + if (!length) return 0; + if (!usb_check()) return 0; + + // Send the first packet + cpt = MIN(length, AT91C_EP_IN_SIZE); + length -= cpt; + while (cpt--) { + pUdp->UDP_FDR[AT91C_EP_IN] = *data++; + } + UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); + + while (length) { + // Fill the next bank + cpt = MIN(length, AT91C_EP_IN_SIZE); + length -= cpt; + while (cpt--) { + pUdp->UDP_FDR[AT91C_EP_IN] = *data++; + } + // Wait for the previous bank to be sent + while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { + if (!usb_check()) return length; + } + UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) + /* wait */; + UDP_SET_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXPKTRDY); + } + + // Wait for the end of transfer + while (!(pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP)) { + if (!usb_check()) return length; + } + + UDP_CLEAR_EP_FLAGS(AT91C_EP_IN, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_IN] & AT91C_UDP_TXCOMP) + /* wait */; + + return length; +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_USB_SendData +//* \brief Send Data through the control endpoint +//*---------------------------------------------------------------------------- +static void AT91F_USB_SendData(AT91PS_UDP pUdp, const char *pData, uint32_t length) { + uint32_t cpt = 0; + AT91_REG csr; + + do { + cpt = MIN(length, 8); + length -= cpt; + + while (cpt--) + pUdp->UDP_FDR[0] = *pData++; + + if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) + /* wait */; + } + + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); + do { + csr = pUdp->UDP_CSR[AT91C_EP_CONTROL]; + + // Data IN stage has been stopped by a status OUT + if (csr & AT91C_UDP_RX_DATA_BK0) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); + return; + } + } while (!(csr & AT91C_UDP_TXCOMP)); + + } while (length); + + if (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) { + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) + /* wait */; + } +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_USB_SendZlp +//* \brief Send zero length packet through the control endpoint +//*---------------------------------------------------------------------------- +static void AT91F_USB_SendZlp(AT91PS_UDP pUdp) { + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXPKTRDY); + while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP)) + /* wait */; + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_TXCOMP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_TXCOMP) + /* wait */; +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_USB_SendStall +//* \brief Stall the control endpoint +//*---------------------------------------------------------------------------- +static void AT91F_USB_SendStall(AT91PS_UDP pUdp) { + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL); + while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_ISOERROR)) + /* wait */; + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & (AT91C_UDP_FORCESTALL | AT91C_UDP_ISOERROR)) + /* wait */; +} + + +//*---------------------------------------------------------------------------- +//* \fn AT91F_CDC_Enumerate +//* \brief This function is a callback invoked when a SETUP packet is received +//*---------------------------------------------------------------------------- +static void AT91F_CDC_Enumerate() { + uint8_t bmRequestType, bRequest; + uint16_t wValue, wIndex, wLength, wStatus; + + if (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP)) + return; + + bmRequestType = pUdp->UDP_FDR[AT91C_EP_CONTROL]; + bRequest = pUdp->UDP_FDR[AT91C_EP_CONTROL]; + wValue = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wValue |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); + wIndex = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wIndex |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); + wLength = (pUdp->UDP_FDR[AT91C_EP_CONTROL] & 0xFF); + wLength |= (pUdp->UDP_FDR[AT91C_EP_CONTROL] << 8); + + if (bmRequestType & 0x80) { // Data Phase Transfer Direction Device to Host + UDP_SET_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_DIR); + while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_DIR)) + /* wait */; + } + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RXSETUP); + while (pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RXSETUP) + /* wait */; + + // Handle supported standard device request Cf Table 9-3 in USB specification Rev 1.1 + switch ((bRequest << 8) | bmRequestType) { + case STD_GET_DESCRIPTOR: + if (wValue == 0x100) // Return Device Descriptor + AT91F_USB_SendData(pUdp, devDescriptor, MIN(sizeof(devDescriptor), wLength)); + else if (wValue == 0x200) // Return Configuration Descriptor + AT91F_USB_SendData(pUdp, cfgDescriptor, MIN(sizeof(cfgDescriptor), wLength)); + else if ((wValue & 0xF00) == 0x300) { // Return String Descriptor + const char *strDescriptor = getStringDescriptor(wValue & 0xff); + if (strDescriptor != NULL) { + AT91F_USB_SendData(pUdp, strDescriptor, MIN(strDescriptor[0], wLength)); + } else { + AT91F_USB_SendStall(pUdp); + } + } + else + AT91F_USB_SendStall(pUdp); + break; + case STD_SET_ADDRESS: + AT91F_USB_SendZlp(pUdp); + pUdp->UDP_FADDR = (AT91C_UDP_FEN | wValue); + pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_FADDEN : 0; + break; + case STD_SET_CONFIGURATION: + btConfiguration = wValue; + AT91F_USB_SendZlp(pUdp); + pUdp->UDP_GLBSTATE = (wValue) ? AT91C_UDP_CONFG : AT91C_UDP_FADDEN; + pUdp->UDP_CSR[AT91C_EP_OUT] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT) : 0; + pUdp->UDP_CSR[AT91C_EP_IN] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN) : 0; + pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (wValue) ? (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN) : 0; + break; + case STD_GET_CONFIGURATION: + AT91F_USB_SendData(pUdp, (char *) &(btConfiguration), sizeof(btConfiguration)); + break; + case STD_GET_STATUS_ZERO: + wStatus = 0; // Device is Bus powered, remote wakeup disabled + AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); + break; + case STD_GET_STATUS_INTERFACE: + wStatus = 0; // reserved for future use + AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); + break; + case STD_GET_STATUS_ENDPOINT: + wStatus = 0; + wIndex &= 0x0F; + if ((pUdp->UDP_GLBSTATE & AT91C_UDP_CONFG) && (wIndex <= AT91C_EP_NOTIFY)) { + wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; + AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); + } else if ((pUdp->UDP_GLBSTATE & AT91C_UDP_FADDEN) && (wIndex == AT91C_EP_CONTROL)) { + wStatus = (pUdp->UDP_CSR[wIndex] & AT91C_UDP_EPEDS) ? 0 : 1; + AT91F_USB_SendData(pUdp, (char *) &wStatus, sizeof(wStatus)); + } else + AT91F_USB_SendStall(pUdp); + break; + case STD_SET_FEATURE_ZERO: + AT91F_USB_SendStall(pUdp); + break; + case STD_SET_FEATURE_INTERFACE: + AT91F_USB_SendZlp(pUdp); + break; + case STD_SET_FEATURE_ENDPOINT: + wIndex &= 0x0F; + if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { + pUdp->UDP_CSR[wIndex] = 0; + AT91F_USB_SendZlp(pUdp); + } else + AT91F_USB_SendStall(pUdp); + break; + case STD_CLEAR_FEATURE_ZERO: + AT91F_USB_SendStall(pUdp); + break; + case STD_CLEAR_FEATURE_INTERFACE: + AT91F_USB_SendZlp(pUdp); + break; + case STD_CLEAR_FEATURE_ENDPOINT: + wIndex &= 0x0F; + if ((wValue == 0) && (wIndex >= AT91C_EP_OUT) && (wIndex <= AT91C_EP_NOTIFY)) { + if (wIndex == AT91C_EP_OUT) + pUdp->UDP_CSR[AT91C_EP_OUT] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_OUT); + else if (wIndex == AT91C_EP_IN) + pUdp->UDP_CSR[AT91C_EP_IN] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_BULK_IN); + else if (wIndex == AT91C_EP_NOTIFY) + pUdp->UDP_CSR[AT91C_EP_NOTIFY] = (AT91C_UDP_EPEDS | AT91C_UDP_EPTYPE_INT_IN); + AT91F_USB_SendZlp(pUdp); + } + else + AT91F_USB_SendStall(pUdp); + break; + + // handle CDC class requests + case SET_LINE_CODING: + while (!(pUdp->UDP_CSR[AT91C_EP_CONTROL] & AT91C_UDP_RX_DATA_BK0)) + /* wait */; + UDP_CLEAR_EP_FLAGS(AT91C_EP_CONTROL, AT91C_UDP_RX_DATA_BK0); + AT91F_USB_SendZlp(pUdp); + break; + case GET_LINE_CODING: + AT91F_USB_SendData(pUdp, (char *) &line, MIN(sizeof(line), wLength)); + break; + case SET_CONTROL_LINE_STATE: + btConnection = wValue; + AT91F_USB_SendZlp(pUdp); + break; + default: + AT91F_USB_SendStall(pUdp); + break; + } +} + + +//*************************************************************************** +// Interface to the main program +//*************************************************************************** + +// The function to receive a command from the client via USB +bool cmd_receive(UsbCommand* cmd) { + + // Check if there is a usb packet available + if (!usb_poll()) + return false; + + // Try to retrieve the available command frame + size_t rxlen = usb_read((uint8_t*)cmd, sizeof(UsbCommand)); + + // Check if the transfer was complete + if (rxlen != sizeof(UsbCommand)) + return false; + + // Received command successfully + return true; +} + + +// The function to send a response to the client via USB +bool cmd_send(uint32_t cmd, uint32_t arg0, uint32_t arg1, uint32_t arg2, void* data, size_t len) { + UsbCommand txcmd; + + for (size_t i = 0; i < sizeof(UsbCommand); i++) { + ((uint8_t*)&txcmd)[i] = 0x00; + } + + // Compose the outgoing command frame + txcmd.cmd = cmd; + txcmd.arg[0] = arg0; + txcmd.arg[1] = arg1; + txcmd.arg[2] = arg2; + + // Add the (optional) content to the frame, with a maximum size of USB_CMD_DATA_SIZE + if (data && len) { + len = MIN(len, USB_CMD_DATA_SIZE); + for (size_t i = 0; i < len; i++) { + txcmd.d.asBytes[i] = ((uint8_t*)data)[i]; + } + } + + // Send frame and make sure all bytes are transmitted + if (usb_write((uint8_t*)&txcmd, sizeof(UsbCommand)) != 0) return false; + + return true; +} diff --git a/common/usb_cdc.h b/common/usb_cdc.h new file mode 100644 index 00000000..31399222 --- /dev/null +++ b/common/usb_cdc.h @@ -0,0 +1,50 @@ +/* + * at91sam7s USB CDC device implementation + * + * Copyright (c) 2012, Roel Verdult + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the copyright holders nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * based on the "Basic USB Example" from ATMEL (doc6123.pdf) + * + * @file usb_cdc.c + * @brief + */ + +#ifndef USB_CDC_H__ +#define USB_CDC_H__ + +#include +#include +#include +#include "usb_cmd.h" + +extern void usb_disable(); +extern void usb_enable(); +extern bool usb_poll(); +extern bool usb_poll_validate_length(); +extern bool cmd_receive(UsbCommand* cmd); +extern bool cmd_send(uint32_t cmd, uint32_t arg0, uint32_t arg1, uint32_t arg2, void* data, size_t len); + +#endif // USB_CDC_H__