From: marshmellow42 Date: Mon, 16 Nov 2015 23:49:20 +0000 (-0500) Subject: lf t55xx and some lf demod fixes/adjustments X-Git-Tag: v2.3.0~13^2~13 X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/commitdiff_plain/db8296025f78251ffa2c28d6fe995bbb0a386c77 lf t55xx and some lf demod fixes/adjustments finally think I like the lf t55xx detect and read cmds. pretty reliable now. --- diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 01b88178..3acecd6e 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -1078,21 +1078,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) #define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) #define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) #define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 -#define READ_GAP 52*8 - -// VALUES TAKEN FROM EM4x function: SendForward -// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) -// WRITE_GAP = 128; (16*8) -// WRITE_1 = 256 32*8; (32*8) - -// These timings work for 4469/4269/4305 (with the 55*8 above) -// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); - -// Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK) -// TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz -// Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier) -// T0 = TIMER_CLOCK1 / 125000 = 192 -// 1 Cycle = 8 microseconds(us) == 1 field clock +#define READ_GAP 26*8 void TurnReadLFOn(int delay) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); @@ -1191,7 +1177,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { cmd_send(CMD_ACK,0,0,0,0,0); } -// Read one card block in page 0 +// Read one card block in page [page] void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { LED_A_ON(); bool PwdMode = arg0 & 0x1; @@ -1475,6 +1461,14 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer // see EM4469 spec //==================================================================== //-------------------------------------------------------------------- +// VALUES TAKEN FROM EM4x function: SendForward +// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) +// WRITE_GAP = 128; (16*8) +// WRITE_1 = 256 32*8; (32*8) + +// These timings work for 4469/4269/4305 (with the 55*8 above) +// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); + uint8_t Prepare_Cmd( uint8_t cmd ) { //-------------------------------------------------------------------- diff --git a/armsrc/lfsampling.c b/armsrc/lfsampling.c index 115d4b18..7c541282 100644 --- a/armsrc/lfsampling.c +++ b/armsrc/lfsampling.c @@ -268,7 +268,7 @@ void doT55x7Acquisition(size_t sample_size) { bool startFound = false; bool highFound = false; uint8_t curSample = 0; - uint8_t firstSample = 0; + uint8_t lastSample = 0; uint16_t skipCnt = 0; while(!BUTTON_PRESS() && skipCnt<1000) { WDT_HIT(); @@ -282,19 +282,18 @@ void doT55x7Acquisition(size_t sample_size) { // skip until the first high sample above threshold if (!startFound && curSample > T55xx_READ_UPPER_THRESHOLD) { - if (curSample > firstSample) - firstSample = curSample; + if (curSample > lastSample) + lastSample = curSample; highFound = true; } else if (!highFound) { skipCnt++; continue; } - // skip until first high samples begin to change - if (startFound || curSample < firstSample-T55xx_READ_TOL){ + if (startFound || curSample < T55xx_READ_UPPER_THRESHOLD-T55xx_READ_TOL){ // if just found start - recover last sample if (!startFound) { - dest[i++] = firstSample; + dest[i++] = lastSample; startFound = true; } // collect samples diff --git a/client/cmddata.c b/client/cmddata.c index 75f44d8f..4dd08008 100644 --- a/client/cmddata.c +++ b/client/cmddata.c @@ -1715,7 +1715,7 @@ int NRZrawDemod(const char *Cmd, bool verbose) size_t BitLen = getFromGraphBuf(BitStream); if (BitLen==0) return 0; int errCnt=0; - errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert, maxErr); + errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert); if (errCnt > maxErr){ if (g_debugMode) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt); return 0; diff --git a/client/cmdlft55xx.c b/client/cmdlft55xx.c index 37f332be..04931dfe 100644 --- a/client/cmdlft55xx.c +++ b/client/cmdlft55xx.c @@ -353,16 +353,20 @@ bool DecodeT55xxBlock(){ ans = FSKrawDemod(cmdStr, FALSE); break; case DEMOD_ASK: - snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted ); + snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted ); ans = ASKDemod(cmdStr, FALSE, FALSE, 1); break; case DEMOD_PSK1: - snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted ); + // skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise) + CmdLtrim("160"); + snprintf(cmdStr, sizeof(buf),"%d %d 6", bitRate[config.bitrate], config.inverted ); ans = PSKDemod(cmdStr, FALSE); break; case DEMOD_PSK2: //inverted won't affect this case DEMOD_PSK3: //not fully implemented - snprintf(cmdStr, sizeof(buf),"%d 0 1", bitRate[config.bitrate] ); + // skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise) + CmdLtrim("160"); + snprintf(cmdStr, sizeof(buf),"%d 0 6", bitRate[config.bitrate] ); ans = PSKDemod(cmdStr, FALSE); psk1TOpsk2(DemodBuffer, DemodBufferLen); break; @@ -372,7 +376,7 @@ bool DecodeT55xxBlock(){ break; case DEMOD_BI: case DEMOD_BIa: - snprintf(cmdStr, sizeof(buf),"0 %d %d 0", bitRate[config.bitrate], config.inverted ); + snprintf(cmdStr, sizeof(buf),"0 %d %d 1", bitRate[config.bitrate], config.inverted ); ans = ASKbiphaseDemod(cmdStr, FALSE); break; default: @@ -432,28 +436,28 @@ bool tryDetectModulation(){ } else { clk = GetAskClock("", FALSE, FALSE); if (clk>0) { - if ( ASKDemod("0 0 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { + if ( ASKDemod("0 0 1", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { tests[hits].modulation = DEMOD_ASK; tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; } - if ( ASKDemod("0 1 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { + if ( ASKDemod("0 1 1", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { tests[hits].modulation = DEMOD_ASK; tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; } - if ( ASKbiphaseDemod("0 0 0 0", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) { + if ( ASKbiphaseDemod("0 0 0 2", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) { tests[hits].modulation = DEMOD_BI; tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; } - if ( ASKbiphaseDemod("0 0 1 0", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) { + if ( ASKbiphaseDemod("0 0 1 2", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) { tests[hits].modulation = DEMOD_BIa; tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; @@ -484,16 +488,18 @@ bool tryDetectModulation(){ //undo trim from nrz save_restoreGB(0); + // skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise) + CmdLtrim("160"); clk = GetPskClock("", FALSE, FALSE); if (clk>0) { - if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { + if ( PSKDemod("0 0 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { tests[hits].modulation = DEMOD_PSK1; tests[hits].bitrate = bitRate; tests[hits].inverted = FALSE; tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; } - if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { + if ( PSKDemod("0 1 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) { tests[hits].modulation = DEMOD_PSK1; tests[hits].bitrate = bitRate; tests[hits].inverted = TRUE; @@ -501,7 +507,7 @@ bool tryDetectModulation(){ ++hits; } // PSK2 - needs a call to psk1TOpsk2. - if ( PSKDemod("0 0 1", FALSE)) { + if ( PSKDemod("0 0 6", FALSE)) { psk1TOpsk2(DemodBuffer, DemodBufferLen); if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){ tests[hits].modulation = DEMOD_PSK2; @@ -512,7 +518,7 @@ bool tryDetectModulation(){ } } // inverse waves does not affect this demod // PSK3 - needs a call to psk1TOpsk2. - if ( PSKDemod("0 0 1", FALSE)) { + if ( PSKDemod("0 0 6", FALSE)) { psk1TOpsk2(DemodBuffer, DemodBufferLen); if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){ tests[hits].modulation = DEMOD_PSK3; @@ -609,31 +615,30 @@ bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk){ if ( DemodBufferLen < 64 ) return FALSE; uint8_t si = 0; - for (uint8_t idx = 0; idx < 64; idx++){ + for (uint8_t idx = 28; idx < 64; idx++){ si = idx; - if ( PackBits(si, 32, DemodBuffer) == 0x00 ) continue; + if ( PackBits(si, 28, DemodBuffer) == 0x00 ) continue; uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key uint8_t resv = PackBits(si, 8, DemodBuffer); si += 8; // 2nibble must be zeroed. - // moved test to here, since this gets most faults first. if (safer != 0x6) continue; if ( resv > 0x00) continue; //uint8_t pageSel = PackBits(si, 1, DemodBuffer); si += 1; //uint8_t fastWrite = PackBits(si, 1, DemodBuffer); si += 1; si += 1+1; int bitRate = PackBits(si, 5, DemodBuffer)*2 + 2; si += 5; //bit rate - if (bitRate > 128) continue; + if (bitRate > 128 || bitRate < 8) continue; - si += 1+1+2+1; - //uint8_t AOR = PackBits(si, 1, DemodBuffer); si += 1; //bit 15 extended mode + //uint8_t AOR = PackBits(si, 1, DemodBuffer); si += 1; //uint8_t PWD = PackBits(si, 1, DemodBuffer); si += 1; //uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2; //could check psk cr //uint8_t inverse = PackBits(si, 1, DemodBuffer); si += 1; - uint8_t modread = PackBits(si, 3, DemodBuffer); si += 3; //bit 24, 30, 31 could be tested for 0 if not extended mode - //uint8_t maxBlk = PackBits(si, 2, DemodBuffer); si += 2; + si += 1+1+2+1; + uint8_t modread = PackBits(si, 3, DemodBuffer); si += 3; + uint8_t maxBlk = PackBits(si, 3, DemodBuffer); si += 3; //uint8_t ST = PackBits(si, 1, DemodBuffer); si += 1; - + if (maxBlk == 0) continue; //test modulation if (!testQ5Modulation(mode, modread)) continue; if (bitRate != clk) continue; @@ -646,7 +651,7 @@ bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk){ } bool testBitRate(uint8_t readRate, uint8_t clk){ - uint8_t expected[8] = {8, 16, 32, 40, 50, 64, 100, 128}; + uint8_t expected[] = {8, 16, 32, 40, 50, 64, 100, 128}; if (expected[readRate] == clk) return true; @@ -657,9 +662,9 @@ bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5) if ( DemodBufferLen < 64 ) return FALSE; uint8_t si = 0; - for (uint8_t idx = 0; idx < 64; idx++){ + for (uint8_t idx = 28; idx < 64; idx++){ si = idx; - if ( PackBits(si, 32, DemodBuffer) == 0x00 ) continue; + if ( PackBits(si, 28, DemodBuffer) == 0x00 ) continue; uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key uint8_t resv = PackBits(si, 4, DemodBuffer); si += 4; //was 7 & +=7+3 //should be only 4 bits if extended mode @@ -668,7 +673,7 @@ bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5) if ( resv > 0x00) continue; uint8_t xtRate = PackBits(si, 3, DemodBuffer); si += 3; //extended mode part of rate - int bitRate = PackBits(si, 3, DemodBuffer); si += 3; //bit rate + int bitRate = PackBits(si, 3, DemodBuffer); si += 3; //bit rate if (bitRate > 7) continue; uint8_t extend = PackBits(si, 1, DemodBuffer); si += 1; //bit 15 extended mode uint8_t modread = PackBits(si, 5, DemodBuffer); si += 5+2+1; @@ -713,8 +718,9 @@ void printT55xxBlock(const char *blockNum){ for (; i < endpos; ++i) bits[i - config.offset]=DemodBuffer[i]; - + //print second round of read data (more accurate due to antenna settling) blockData = PackBits(0, 32, bits); + PrintAndLog(" %s | %08X | %s", blockNum, blockData, sprint_bin(bits,32)); } @@ -968,7 +974,7 @@ int CmdT55xxInfo(const char *Cmd){ uint32_t fw = PackBits(si, 1, DemodBuffer); si += 1; uint32_t inv = PackBits(si, 1, DemodBuffer); si += 1; uint32_t por = PackBits(si, 1, DemodBuffer); si += 1; - if (config.Q5) PrintAndLog("*** Warning *** Info read off a Q5 will not work as expected"); + if (config.Q5) PrintAndLog("*** Warning *** Config Info read off a Q5 will not display as expected"); PrintAndLog(""); PrintAndLog("-- T55xx Configuration & Tag Information --------------------"); PrintAndLog("-------------------------------------------------------------"); @@ -1269,8 +1275,8 @@ static command_t CommandTable[] = {"read", CmdT55xxReadBlock, 0, "b p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]"}, {"resetread",CmdResetRead, 0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"}, {"write", CmdT55xxWriteBlock,0, "b d p [password] [1] -- Write T55xx block data. Optional [p password], [page1]"}, - {"trace", CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"}, - {"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"}, + {"trace", CmdT55xxReadTrace, 0, "[1] Show T55x7 traceability data (page 1/ blk 0-1)"}, + {"info", CmdT55xxInfo, 0, "[1] Show T55x7 configuration data (page 0/ blk 0)"}, {"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. Optional [password], [override]"}, {"special", special, 0, "Show block changes with 64 different offsets"}, {"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"}, diff --git a/common/lfdemod.c b/common/lfdemod.c index 32feab6a..063c8a74 100644 --- a/common/lfdemod.c +++ b/common/lfdemod.c @@ -407,12 +407,12 @@ size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow if (currSample < (fclow-2)){ //0-5 = garbage noise //do nothing with extra garbage } else if (currSample < (fchigh-1)) { //6-8 = 8 sample waves - if (LastSample > (fchigh-2) && preLastSample < (fchigh-1)){ + if (LastSample > (fchigh-2) && (preLastSample < (fchigh-1) || preLastSample == 0 )){ dest[numBits-1]=1; //correct last 9 wave surrounded by 8 waves } dest[numBits++]=1; - } else if (currSample > (fchigh+1) && !numBits) { //12 + and first bit = garbage + } else if (currSample > (fchigh) && !numBits) { //12 + and first bit = garbage //do nothing with beginning garbage } else if (currSample == (fclow+1) && LastSample == (fclow-1)) { // had a 7 then a 9 should be two 8's dest[numBits++]=1; @@ -439,12 +439,16 @@ size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen, //if lastval was 1, we have a 1->0 crossing if (dest[idx-1]==1) { - if (!numBits && n < rfLen/fclow) { - n=0; - lastval = dest[idx]; - continue; + if (!numBits) { + if (n < rfLen/fclow) { + n=0; + lastval = dest[idx]; + continue; + } + n = (n * fclow + rfLen/4) / rfLen; + } else { + n = (n * fclow + rfLen/2) / rfLen; } - n = (n * fclow + rfLen/2) / rfLen; } else {// 0->1 crossing //test first bitsample too small if (!numBits && n < rfLen/fchigh) { @@ -703,15 +707,26 @@ int PyramiddemodFSK(uint8_t *dest, size_t *size) return (int)startIdx; } +/* +void dummy(char *fmt, ...){} + +#ifndef ON_DEVICE +#include "ui.h" +#define prnt PrintAndLog +#else + +#define prnt dummy +#endif +*/ // by marshmellow // to detect a wave that has heavily clipped (clean) samples uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, uint8_t high, uint8_t low) { uint16_t allPeaks=1; uint16_t cntPeaks=0; - size_t loopEnd = 512+60; + size_t loopEnd = 512+160; if (loopEnd > size) loopEnd = size; - for (size_t i=60; ilow && dest[i]= fndClk[clkCnt]-(fndClk[clkCnt]/8) && minClk <= fndClk[clkCnt]+1) return fndClk[clkCnt]; @@ -770,8 +785,8 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) uint8_t clk[] = {255,8,16,32,40,50,64,100,128,255}; uint8_t clkEnd = 9; uint8_t loopCnt = 255; //don't need to loop through entire array... - if (size <= loopCnt) return -1; //not enough samples - + if (size <= loopCnt+60) return -1; //not enough samples + size -= 60; //sometimes there is a strange end wave - filter out this.... //if we already have a valid clock uint8_t clockFnd=0; for (;i= dest[i+2]){ if (waveStart == 0) { waveStart = i+1; - //PrintAndLog("DEBUG: waveStart: %d",waveStart); + //prnt("DEBUG: waveStart: %d",waveStart); } else { waveEnd = i+1; - //PrintAndLog("DEBUG: waveEnd: %d",waveEnd); + //prnt("DEBUG: waveEnd: %d",waveEnd); waveLenCnt = waveEnd-waveStart; if (waveLenCnt > fc){ firstFullWave = waveStart; @@ -909,7 +923,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock) } } } - //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen); + //prnt("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen); //test each valid clock from greatest to smallest to see which lines up for(clkCnt=7; clkCnt >= 1 ; clkCnt--){ @@ -917,7 +931,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock) waveStart = 0; errCnt=0; peakcnt=0; - //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit); + //prnt("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit); for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){ //top edge of wave = start of new wave @@ -930,7 +944,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock) waveLenCnt = waveEnd-waveStart; if (waveLenCnt > fc){ //if this wave is a phase shift - //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc); + //prnt("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc); if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit peakcnt++; lastClkBit+=clk[clkCnt]; @@ -959,11 +973,50 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock) if (peaksdet[i] > peaksdet[best]) { best = i; } - //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]); + //prnt("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]); } return clk[best]; } +int DetectStrongNRZClk(uint8_t *dest, size_t size, int peak, int low){ + //find shortest transition from high to low + size_t i = 0; + size_t transition1 = 0; + int lowestTransition = 255; + uint8_t lastWasHigh=0; + //find first valid beginning of a high/low wave + if (dest[i] >= peak) { + for (; i < size; i++) { + if (dest[i] <= low) break; + } + lastWasHigh=0; + } else if (dest[i] <= low) { + for (; i < size; i++) { + if (dest[i] >= peak) break; + } + lastWasHigh=1; + } else { + for (; i < size; i++) { + if (dest[i] >= peak || dest[i] <= low) { + lastWasHigh = (dest[i] >= peak); + break; + } + } + } + if (i==size) return 0; + transition1 = i; + + for (;i < size; i++) { + if ((dest[i] >= peak && !lastWasHigh) || (dest[i] <= low && lastWasHigh)) { + lastWasHigh = (dest[i] >= peak); + if (i-transition1 < lowestTransition) lowestTransition = i-transition1; + transition1 = i; + } + } + if (lowestTransition == 255) lowestTransition = 0; + return lowestTransition; +} + //by marshmellow //detect nrz clock by reading #peaks vs no peaks(or errors) int DetectNRZClock(uint8_t dest[], size_t size, int clock) @@ -972,8 +1025,7 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock) uint8_t clk[]={8,16,32,40,50,64,100,128,255}; size_t loopCnt = 4096; //don't need to loop through entire array... if (size == 0) return 0; - if (size= peak || dest[i] <= low){ - peakcnt++; + if (!firstpeak) continue; + smplCnt++; } else { - if (peakcnt>0 && maxPeak < peakcnt){ - maxPeak = peakcnt; + firstpeak=1; + if (smplCnt > 6 ){ + if (maxPeak > smplCnt){ + maxPeak = smplCnt; + //prnt("maxPk: %d",maxPeak); + } + peakcnt++; + //prnt("maxPk: %d, smplCnt: %d, peakcnt: %d",maxPeak,smplCnt,peakcnt); + smplCnt=0; } - peakcnt=0; } } + uint8_t samePeak=0; + uint8_t errBitHigh=0; peakcnt=0; //test each valid clock from smallest to greatest to see which lines up for(clkCnt=0; clkCnt < 8; ++clkCnt){ - //ignore clocks smaller than largest peak - if (clk[clkCnt]= peak) || (dest[ii] <= low)){ peakcnt=0; - // now that we have the first one lined up test rest of wave array - for (i=0; i < ((int)((size-ii-tol)/clk[clkCnt])-1); ++i){ - if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){ - peakcnt++; + uint8_t bitHigh =0; + uint8_t ignoreCnt = 0; + uint8_t ignoreWindow = 4; + int lastBit = ii-clk[clkCnt]; + //loop through to see if this start location works + for (i = ii; i < size-20; ++i) { + // if we are at a clock bit + if ((i >= lastBit + clk[clkCnt] - tol) && (i <= lastBit + clk[clkCnt] + tol)) { + //test high/low + if (dest[i] >= peak || dest[i] <= low) { + if (samePeak) peakcnt--; + bitHigh=1; + peakcnt++; + errBitHigh = 0; + ignoreCnt = ignoreWindow; + lastBit += clk[clkCnt]; + samePeak = 1; + } else if (i == lastBit + clk[clkCnt] + tol) { + lastBit += clk[clkCnt]; + samePeak = 0; + } + //else if not a clock bit and no peaks + } else if (dest[i] < peak && dest[i] > low){ + samePeak = 0; + if (ignoreCnt==0){ + bitHigh=0; + if (errBitHigh==1) peakcnt--; + errBitHigh=0; + } else { + ignoreCnt--; + } + // else if not a clock bit but we have a peak + } else if ((dest[i]>=peak || dest[i]<=low) && (bitHigh==0)) { + //error bar found no clock... + errBitHigh=1; } } if(peakcnt>peaksdet[clkCnt]) { @@ -1027,9 +1121,14 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock) for (iii=7; iii > 0; iii--){ if (peaksdet[iii] > peaksdet[best]){ best = iii; + } else if (peaksdet[iii] == peaksdet[best] && lowestTransition){ + if (clk[iii] > (lowestTransition - (clk[iii]/8)) && clk[iii] < (lowestTransition + (clk[iii]/8))){ + best = iii; + } } - //PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]); + //prnt("DEBUG: Clk: %d, peaks: %d, maxPeak: %d, bestClk: %d, lowestTrs: %d",clk[iii],peaksdet[iii],maxPeak, clk[best], lowestTransition); } + return clk[best]; } @@ -1089,123 +1188,37 @@ int indala26decode(uint8_t *bitStream, size_t *size, uint8_t *invert) return (int) startidx; } -// by marshmellow - demodulate NRZ wave (both similar enough) +// by marshmellow - demodulate NRZ wave // peaks invert bit (high=1 low=0) each clock cycle = 1 bit determined by last peak -// there probably is a much simpler way to do this.... -int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int maxErr) -{ +int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert){ if (justNoise(dest, *size)) return -1; *clk = DetectNRZClock(dest, *size, *clk); if (*clk==0) return -2; size_t i, gLen = 4096; - if (gLen>*size) gLen = *size; + if (gLen>*size) gLen = *size-20; int high, low; if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low - int lastBit = 0; //set first clock check - size_t iii = 0, bitnum = 0; //bitnum counter - uint16_t errCnt = 0, MaxBits = 1000; - size_t bestErrCnt = maxErr+1; - size_t bestPeakCnt = 0, bestPeakStart = 0; - uint8_t bestFirstPeakHigh=0, firstPeakHigh=0, curBit=0, bitHigh=0, errBitHigh=0; - uint8_t tol = 1; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave - uint16_t peakCnt=0; - uint8_t ignoreWindow=4; - uint8_t ignoreCnt=ignoreWindow; //in case of noise near peak - //loop to find first wave that works - align to clock - for (iii=0; iii < gLen; ++iii){ - if ((dest[iii]>=high) || (dest[iii]<=low)){ - if (dest[iii]>=high) firstPeakHigh=1; - else firstPeakHigh=0; - lastBit=iii-*clk; - peakCnt=0; - errCnt=0; - //loop through to see if this start location works - for (i = iii; i < *size; ++i) { - // if we are at a clock bit - if ((i >= lastBit + *clk - tol) && (i <= lastBit + *clk + tol)) { - //test high/low - if (dest[i] >= high || dest[i] <= low) { - bitHigh = 1; - peakCnt++; - errBitHigh = 0; - ignoreCnt = ignoreWindow; - lastBit += *clk; - } else if (i == lastBit + *clk + tol) { - lastBit += *clk; - } - //else if no bars found - } else if (dest[i] < high && dest[i] > low){ - if (ignoreCnt==0){ - bitHigh=0; - if (errBitHigh==1) errCnt++; - errBitHigh=0; - } else { - ignoreCnt--; - } - } else if ((dest[i]>=high || dest[i]<=low) && (bitHigh==0)) { - //error bar found no clock... - errBitHigh=1; - } - if (((i-iii) / *clk)>=MaxBits) break; - } - //we got more than 64 good bits and not all errors - if (((i-iii) / *clk) > 64 && (errCnt <= (maxErr))) { - //possible good read - if (!errCnt || peakCnt > bestPeakCnt){ - bestFirstPeakHigh=firstPeakHigh; - bestErrCnt = errCnt; - bestPeakCnt = peakCnt; - bestPeakStart = iii; - if (!errCnt) break; //great read - finish - } - } - } + + uint8_t bit=0; + //convert wave samples to 1's and 0's + for(i=20; i < *size-20; i++){ + if (dest[i] >= high) bit = 1; + if (dest[i] <= low) bit = 0; + dest[i] = bit; } - //PrintAndLog("DEBUG: bestErrCnt: %d, maxErr: %d, bestStart: %d, bestPeakCnt: %d, bestPeakStart: %d",bestErrCnt,maxErr,bestStart,bestPeakCnt,bestPeakStart); - if (bestErrCnt > maxErr) return bestErrCnt; - - //best run is good enough set to best run and set overwrite BinStream - lastBit = bestPeakStart - *clk; - memset(dest, bestFirstPeakHigh^1, bestPeakStart / *clk); - bitnum += (bestPeakStart / *clk); - for (i = bestPeakStart; i < *size; ++i) { - // if expecting a clock bit - if ((i >= lastBit + *clk - tol) && (i <= lastBit + *clk + tol)) { - // test high/low - if (dest[i] >= high || dest[i] <= low) { - peakCnt++; - bitHigh = 1; - errBitHigh = 0; - ignoreCnt = ignoreWindow; - curBit = *invert; - if (dest[i] >= high) curBit ^= 1; - dest[bitnum++] = curBit; - lastBit += *clk; - //else no bars found in clock area - } else if (i == lastBit + *clk + tol) { - dest[bitnum++] = curBit; - lastBit += *clk; - } - //else if no bars found - } else if (dest[i] < high && dest[i] > low){ - if (ignoreCnt == 0){ - bitHigh = 0; - if (errBitHigh == 1){ - dest[bitnum++] = 7; - errCnt++; - } - errBitHigh=0; - } else { - ignoreCnt--; - } - } else if ((dest[i] >= high || dest[i] <= low) && (bitHigh == 0)) { - //error bar found no clock... - errBitHigh=1; + //now demod based on clock (rf/32 = 32 1's for one 1 bit, 32 0's for one 0 bit) + size_t lastBit = 0; + size_t numBits = 0; + for(i=21; i < *size-20; i++) { + //if transition detected or large number of same bits - store the passed bits + if (dest[i] != dest[i-1] || (i-lastBit) == (10 * *clk)) { + memset(dest+numBits, dest[i-1] ^ *invert, (i - lastBit + (*clk/4)) / *clk); + numBits += (i - lastBit + (*clk/4)) / *clk; + lastBit = i-1; } - if (bitnum >= MaxBits) break; } - *size = bitnum; - return bestErrCnt; + *size = numBits; + return 0; } //by marshmellow @@ -1405,6 +1418,7 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert) uint16_t loopCnt = 4096; //don't need to loop through entire array... if (*size fc && waveStart > fc){ //not first peak and is a large wave + if (waveLenCnt > fc && waveStart > fc && !(waveLenCnt > fc+2)){ //not first peak and is a large wave but not out of whack lastAvgWaveVal = avgWaveVal/(waveLenCnt); firstFullWave = waveStart; fullWaveLen=waveLenCnt; @@ -1434,14 +1448,21 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert) } avgWaveVal += dest[i+2]; } + if (firstFullWave == 0) { + // no phase shift detected - could be all 1's or 0's - doesn't matter where we start + // so skip a little to ensure we are past any Start Signal + firstFullWave = 160; + memset(dest, curPhase, firstFullWave / *clock); + } else { + memset(dest, curPhase^1, firstFullWave / *clock); + } + //advance bits + numBits += (firstFullWave / *clock); + //set start of wave as clock align + lastClkBit = firstFullWave; //PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen); - lastClkBit = firstFullWave; //set start of wave as clock align //PrintAndLog("DEBUG: clk: %d, lastClkBit: %d", *clock, lastClkBit); waveStart = 0; - size_t numBits=0; - //set skipped bits - memset(dest, curPhase^1, firstFullWave / *clock); - numBits += (firstFullWave / *clock); dest[numBits++] = curPhase; //set first read bit for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){ //top edge of wave = start of new wave diff --git a/common/lfdemod.h b/common/lfdemod.h index cc4fa27a..0e1e99ad 100644 --- a/common/lfdemod.h +++ b/common/lfdemod.h @@ -32,7 +32,7 @@ int getHiLo(uint8_t *BitStream, size_t size, int *high, int *low, uint8_t f uint32_t manchesterEncode2Bytes(uint16_t datain); int ManchesterEncode(uint8_t *BitStream, size_t size); int manrawdecode(uint8_t *BitStream, size_t *size, uint8_t invert); -int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int maxErr); +int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert); uint8_t parityTest(uint32_t bits, uint8_t bitLen, uint8_t pType); uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx); int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert);