From aafd94b868ebaf4cb47549653ecf58951289ac93 Mon Sep 17 00:00:00 2001 From: d18c7db Date: Sun, 27 Sep 2009 20:46:47 +0000 Subject: [PATCH] Change over to standard AT91 header file --- include/AT91SAM7S512.h | 2296 ++++++++++++++++++++++++++++++++++++++++ include/at91sam7s128.h | 847 ++++----------- 2 files changed, 2510 insertions(+), 633 deletions(-) create mode 100644 include/AT91SAM7S512.h diff --git a/include/AT91SAM7S512.h b/include/AT91SAM7S512.h new file mode 100644 index 00000000..6049eb2f --- /dev/null +++ b/include/AT91SAM7S512.h @@ -0,0 +1,2296 @@ +// ---------------------------------------------------------------------------- +// ATMEL Microcontroller Software Support - ROUSSET - +// ---------------------------------------------------------------------------- +// Copyright (c) 2006, Atmel Corporation +// +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// - Redistributions of source code must retain the above copyright notice, +// this list of conditions and the disclaimer below. +// +// Atmel's name may not be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR +// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, +// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// ---------------------------------------------------------------------------- +// File Name : AT91SAM7S512.h +// Object : AT91SAM7S512 definitions +// Generated : AT91 SW Application Group 07/07/2008 (16:13:20) +// +// CVS Reference : /AT91SAM7S512.pl/1.6/Wed Aug 30 14:08:44 2006// +// CVS Reference : /SYS_SAM7S.pl/1.2/Thu Feb 3 10:47:39 2005// +// CVS Reference : /MC_SAM7SE.pl/1.10/Thu Feb 16 16:35:28 2006// +// CVS Reference : /PMC_SAM7S_USB.pl/1.4/Tue Feb 8 14:00:19 2005// +// CVS Reference : /RSTC_SAM7S.pl/1.2/Wed Jul 13 15:25:17 2005// +// CVS Reference : /UDP_4ept.pl/1.1/Thu Aug 3 12:26:00 2006// +// CVS Reference : /PWM_SAM7S.pl/1.1/Tue May 10 12:38:54 2005// +// CVS Reference : /AIC_6075B.pl/1.3/Fri May 20 14:21:42 2005// +// CVS Reference : /PIO_6057A.pl/1.2/Thu Feb 3 10:29:42 2005// +// CVS Reference : /RTTC_6081A.pl/1.2/Thu Nov 4 13:57:22 2004// +// CVS Reference : /PITC_6079A.pl/1.2/Thu Nov 4 13:56:22 2004// +// CVS Reference : /WDTC_6080A.pl/1.3/Thu Nov 4 13:58:52 2004// +// CVS Reference : /VREG_6085B.pl/1.1/Tue Feb 1 16:40:38 2005// +// CVS Reference : /PDC_6074C.pl/1.2/Thu Feb 3 09:02:11 2005// +// CVS Reference : /DBGU_6059D.pl/1.1/Mon Jan 31 13:54:41 2005// +// CVS Reference : /SPI_6088D.pl/1.3/Fri May 20 14:23:02 2005// +// CVS Reference : /US_6089C.pl/1.1/Mon Jan 31 13:56:02 2005// +// CVS Reference : /SSC_6078A.pl/1.1/Tue Jul 13 07:10:41 2004// +// CVS Reference : /TWI_6061A.pl/1.2/Fri Oct 27 11:40:48 2006// +// CVS Reference : /TC_6082A.pl/1.7/Wed Mar 9 16:31:51 2005// +// CVS Reference : /ADC_6051C.pl/1.1/Mon Jan 31 13:12:40 2005// +// CVS Reference : /EBI_SAM7SE512.pl/1.22/Fri Nov 18 17:47:47 2005// +// CVS Reference : /SMC_1783A.pl/1.4/Thu Feb 3 10:30:06 2005// +// CVS Reference : /SDRC_SAM7SE512.pl/1.7/Fri Jul 8 07:50:18 2005// +// CVS Reference : /HECC_SAM7SE512.pl/1.8/Tue Jul 12 06:31:42 2005// +// ---------------------------------------------------------------------------- + +#ifndef AT91SAM7S512_H +#define AT91SAM7S512_H + +#ifndef __ASSEMBLY__ +typedef volatile unsigned int AT91_REG;// Hardware register definition +#define AT91_CAST(a) (a) +#else +#define AT91_CAST(a) +#endif + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR System Peripherals +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_SYS { + AT91_REG AIC_SMR[32]; // Source Mode Register + AT91_REG AIC_SVR[32]; // Source Vector Register + AT91_REG AIC_IVR; // IRQ Vector Register + AT91_REG AIC_FVR; // FIQ Vector Register + AT91_REG AIC_ISR; // Interrupt Status Register + AT91_REG AIC_IPR; // Interrupt Pending Register + AT91_REG AIC_IMR; // Interrupt Mask Register + AT91_REG AIC_CISR; // Core Interrupt Status Register + AT91_REG Reserved0[2]; // + AT91_REG AIC_IECR; // Interrupt Enable Command Register + AT91_REG AIC_IDCR; // Interrupt Disable Command Register + AT91_REG AIC_ICCR; // Interrupt Clear Command Register + AT91_REG AIC_ISCR; // Interrupt Set Command Register + AT91_REG AIC_EOICR; // End of Interrupt Command Register + AT91_REG AIC_SPU; // Spurious Vector Register + AT91_REG AIC_DCR; // Debug Control Register (Protect) + AT91_REG Reserved1[1]; // + AT91_REG AIC_FFER; // Fast Forcing Enable Register + AT91_REG AIC_FFDR; // Fast Forcing Disable Register + AT91_REG AIC_FFSR; // Fast Forcing Status Register + AT91_REG Reserved2[45]; // + AT91_REG DBGU_CR; // Control Register + AT91_REG DBGU_MR; // Mode Register + AT91_REG DBGU_IER; // Interrupt Enable Register + AT91_REG DBGU_IDR; // Interrupt Disable Register + AT91_REG DBGU_IMR; // Interrupt Mask Register + AT91_REG DBGU_CSR; // Channel Status Register + AT91_REG DBGU_RHR; // Receiver Holding Register + AT91_REG DBGU_THR; // Transmitter Holding Register + AT91_REG DBGU_BRGR; // Baud Rate Generator Register + AT91_REG Reserved3[7]; // + AT91_REG DBGU_CIDR; // Chip ID Register + AT91_REG DBGU_EXID; // Chip ID Extension Register + AT91_REG DBGU_FNTR; // Force NTRST Register + AT91_REG Reserved4[45]; // + AT91_REG DBGU_RPR; // Receive Pointer Register + AT91_REG DBGU_RCR; // Receive Counter Register + AT91_REG DBGU_TPR; // Transmit Pointer Register + AT91_REG DBGU_TCR; // Transmit Counter Register + AT91_REG DBGU_RNPR; // Receive Next Pointer Register + AT91_REG DBGU_RNCR; // Receive Next Counter Register + AT91_REG DBGU_TNPR; // Transmit Next Pointer Register + AT91_REG DBGU_TNCR; // Transmit Next Counter Register + AT91_REG DBGU_PTCR; // PDC Transfer Control Register + AT91_REG DBGU_PTSR; // PDC Transfer Status Register + AT91_REG Reserved5[54]; // + AT91_REG PIOA_PER; // PIO Enable Register + AT91_REG PIOA_PDR; // PIO Disable Register + AT91_REG PIOA_PSR; // PIO Status Register + AT91_REG Reserved6[1]; // + AT91_REG PIOA_OER; // Output Enable Register + AT91_REG PIOA_ODR; // Output Disable Registerr + AT91_REG PIOA_OSR; // Output Status Register + AT91_REG Reserved7[1]; // + AT91_REG PIOA_IFER; // Input Filter Enable Register + AT91_REG PIOA_IFDR; // Input Filter Disable Register + AT91_REG PIOA_IFSR; // Input Filter Status Register + AT91_REG Reserved8[1]; // + AT91_REG PIOA_SODR; // Set Output Data Register + AT91_REG PIOA_CODR; // Clear Output Data Register + AT91_REG PIOA_ODSR; // Output Data Status Register + AT91_REG PIOA_PDSR; // Pin Data Status Register + AT91_REG PIOA_IER; // Interrupt Enable Register + AT91_REG PIOA_IDR; // Interrupt Disable Register + AT91_REG PIOA_IMR; // Interrupt Mask Register + AT91_REG PIOA_ISR; // Interrupt Status Register + AT91_REG PIOA_MDER; // Multi-driver Enable Register + AT91_REG PIOA_MDDR; // Multi-driver Disable Register + AT91_REG PIOA_MDSR; // Multi-driver Status Register + AT91_REG Reserved9[1]; // + AT91_REG PIOA_PPUDR; // Pull-up Disable Register + AT91_REG PIOA_PPUER; // Pull-up Enable Register + AT91_REG PIOA_PPUSR; // Pull-up Status Register + AT91_REG Reserved10[1]; // + AT91_REG PIOA_ASR; // Select A Register + AT91_REG PIOA_BSR; // Select B Register + AT91_REG PIOA_ABSR; // AB Select Status Register + AT91_REG Reserved11[9]; // + AT91_REG PIOA_OWER; // Output Write Enable Register + AT91_REG PIOA_OWDR; // Output Write Disable Register + AT91_REG PIOA_OWSR; // Output Write Status Register + AT91_REG Reserved12[469]; // + AT91_REG PMC_SCER; // System Clock Enable Register + AT91_REG PMC_SCDR; // System Clock Disable Register + AT91_REG PMC_SCSR; // System Clock Status Register + AT91_REG Reserved13[1]; // + AT91_REG PMC_PCER; // Peripheral Clock Enable Register + AT91_REG PMC_PCDR; // Peripheral Clock Disable Register + AT91_REG PMC_PCSR; // Peripheral Clock Status Register + AT91_REG Reserved14[1]; // + AT91_REG PMC_MOR; // Main Oscillator Register + AT91_REG PMC_MCFR; // Main Clock Frequency Register + AT91_REG Reserved15[1]; // + AT91_REG PMC_PLLR; // PLL Register + AT91_REG PMC_MCKR; // Master Clock Register + AT91_REG Reserved16[3]; // + AT91_REG PMC_PCKR[3]; // Programmable Clock Register + AT91_REG Reserved17[5]; // + AT91_REG PMC_IER; // Interrupt Enable Register + AT91_REG PMC_IDR; // Interrupt Disable Register + AT91_REG PMC_SR; // Status Register + AT91_REG PMC_IMR; // Interrupt Mask Register + AT91_REG Reserved18[36]; // + AT91_REG RSTC_RCR; // Reset Control Register + AT91_REG RSTC_RSR; // Reset Status Register + AT91_REG RSTC_RMR; // Reset Mode Register + AT91_REG Reserved19[5]; // + AT91_REG RTTC_RTMR; // Real-time Mode Register + AT91_REG RTTC_RTAR; // Real-time Alarm Register + AT91_REG RTTC_RTVR; // Real-time Value Register + AT91_REG RTTC_RTSR; // Real-time Status Register + AT91_REG PITC_PIMR; // Period Interval Mode Register + AT91_REG PITC_PISR; // Period Interval Status Register + AT91_REG PITC_PIVR; // Period Interval Value Register + AT91_REG PITC_PIIR; // Period Interval Image Register + AT91_REG WDTC_WDCR; // Watchdog Control Register + AT91_REG WDTC_WDMR; // Watchdog Mode Register + AT91_REG WDTC_WDSR; // Watchdog Status Register + AT91_REG Reserved20[5]; // + AT91_REG VREG_MR; // Voltage Regulator Mode Register +} AT91S_SYS, *AT91PS_SYS; +#else + +#endif + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_AIC { + AT91_REG AIC_SMR[32]; // Source Mode Register + AT91_REG AIC_SVR[32]; // Source Vector Register + AT91_REG AIC_IVR; // IRQ Vector Register + AT91_REG AIC_FVR; // FIQ Vector Register + AT91_REG AIC_ISR; // Interrupt Status Register + AT91_REG AIC_IPR; // Interrupt Pending Register + AT91_REG AIC_IMR; // Interrupt Mask Register + AT91_REG AIC_CISR; // Core Interrupt Status Register + AT91_REG Reserved0[2]; // + AT91_REG AIC_IECR; // Interrupt Enable Command Register + AT91_REG AIC_IDCR; // Interrupt Disable Command Register + AT91_REG AIC_ICCR; // Interrupt Clear Command Register + AT91_REG AIC_ISCR; // Interrupt Set Command Register + AT91_REG AIC_EOICR; // End of Interrupt Command Register + AT91_REG AIC_SPU; // Spurious Vector Register + AT91_REG AIC_DCR; // Debug Control Register (Protect) + AT91_REG Reserved1[1]; // + AT91_REG AIC_FFER; // Fast Forcing Enable Register + AT91_REG AIC_FFDR; // Fast Forcing Disable Register + AT91_REG AIC_FFSR; // Fast Forcing Status Register +} AT91S_AIC, *AT91PS_AIC; +#else +#define AIC_SMR (AT91_CAST(AT91_REG *) 0x00000000) // (AIC_SMR) Source Mode Register +#define AIC_SVR (AT91_CAST(AT91_REG *) 0x00000080) // (AIC_SVR) Source Vector Register +#define AIC_IVR (AT91_CAST(AT91_REG *) 0x00000100) // (AIC_IVR) IRQ Vector Register +#define AIC_FVR (AT91_CAST(AT91_REG *) 0x00000104) // (AIC_FVR) FIQ Vector Register +#define AIC_ISR (AT91_CAST(AT91_REG *) 0x00000108) // (AIC_ISR) Interrupt Status Register +#define AIC_IPR (AT91_CAST(AT91_REG *) 0x0000010C) // (AIC_IPR) Interrupt Pending Register +#define AIC_IMR (AT91_CAST(AT91_REG *) 0x00000110) // (AIC_IMR) Interrupt Mask Register +#define AIC_CISR (AT91_CAST(AT91_REG *) 0x00000114) // (AIC_CISR) Core Interrupt Status Register +#define AIC_IECR (AT91_CAST(AT91_REG *) 0x00000120) // (AIC_IECR) Interrupt Enable Command Register +#define AIC_IDCR (AT91_CAST(AT91_REG *) 0x00000124) // (AIC_IDCR) Interrupt Disable Command Register +#define AIC_ICCR (AT91_CAST(AT91_REG *) 0x00000128) // (AIC_ICCR) Interrupt Clear Command Register +#define AIC_ISCR (AT91_CAST(AT91_REG *) 0x0000012C) // (AIC_ISCR) Interrupt Set Command Register +#define AIC_EOICR (AT91_CAST(AT91_REG *) 0x00000130) // (AIC_EOICR) End of Interrupt Command Register +#define AIC_SPU (AT91_CAST(AT91_REG *) 0x00000134) // (AIC_SPU) Spurious Vector Register +#define AIC_DCR (AT91_CAST(AT91_REG *) 0x00000138) // (AIC_DCR) Debug Control Register (Protect) +#define AIC_FFER (AT91_CAST(AT91_REG *) 0x00000140) // (AIC_FFER) Fast Forcing Enable Register +#define AIC_FFDR (AT91_CAST(AT91_REG *) 0x00000144) // (AIC_FFDR) Fast Forcing Disable Register +#define AIC_FFSR (AT91_CAST(AT91_REG *) 0x00000148) // (AIC_FFSR) Fast Forcing Status Register + +#endif +// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- +#define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level +#define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level +#define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level +#define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type +#define AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL (0x0 << 5) // (AIC) Internal Sources Code Label High-level Sensitive +#define AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL (0x0 << 5) // (AIC) External Sources Code Label Low-level Sensitive +#define AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE (0x1 << 5) // (AIC) Internal Sources Code Label Positive Edge triggered +#define AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE (0x1 << 5) // (AIC) External Sources Code Label Negative Edge triggered +#define AT91C_AIC_SRCTYPE_HIGH_LEVEL (0x2 << 5) // (AIC) Internal Or External Sources Code Label High-level Sensitive +#define AT91C_AIC_SRCTYPE_POSITIVE_EDGE (0x3 << 5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered +// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- +#define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status +#define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status +// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- +#define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode +#define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Peripheral DMA Controller +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PDC { + AT91_REG PDC_RPR; // Receive Pointer Register + AT91_REG PDC_RCR; // Receive Counter Register + AT91_REG PDC_TPR; // Transmit Pointer Register + AT91_REG PDC_TCR; // Transmit Counter Register + AT91_REG PDC_RNPR; // Receive Next Pointer Register + AT91_REG PDC_RNCR; // Receive Next Counter Register + AT91_REG PDC_TNPR; // Transmit Next Pointer Register + AT91_REG PDC_TNCR; // Transmit Next Counter Register + AT91_REG PDC_PTCR; // PDC Transfer Control Register + AT91_REG PDC_PTSR; // PDC Transfer Status Register +} AT91S_PDC, *AT91PS_PDC; +#else +#define PDC_RPR (AT91_CAST(AT91_REG *) 0x00000000) // (PDC_RPR) Receive Pointer Register +#define PDC_RCR (AT91_CAST(AT91_REG *) 0x00000004) // (PDC_RCR) Receive Counter Register +#define PDC_TPR (AT91_CAST(AT91_REG *) 0x00000008) // (PDC_TPR) Transmit Pointer Register +#define PDC_TCR (AT91_CAST(AT91_REG *) 0x0000000C) // (PDC_TCR) Transmit Counter Register +#define PDC_RNPR (AT91_CAST(AT91_REG *) 0x00000010) // (PDC_RNPR) Receive Next Pointer Register +#define PDC_RNCR (AT91_CAST(AT91_REG *) 0x00000014) // (PDC_RNCR) Receive Next Counter Register +#define PDC_TNPR (AT91_CAST(AT91_REG *) 0x00000018) // (PDC_TNPR) Transmit Next Pointer Register +#define PDC_TNCR (AT91_CAST(AT91_REG *) 0x0000001C) // (PDC_TNCR) Transmit Next Counter Register +#define PDC_PTCR (AT91_CAST(AT91_REG *) 0x00000020) // (PDC_PTCR) PDC Transfer Control Register +#define PDC_PTSR (AT91_CAST(AT91_REG *) 0x00000024) // (PDC_PTSR) PDC Transfer Status Register + +#endif +// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- +#define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable +#define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable +#define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable +#define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable +// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Debug Unit +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_DBGU { + AT91_REG DBGU_CR; // Control Register + AT91_REG DBGU_MR; // Mode Register + AT91_REG DBGU_IER; // Interrupt Enable Register + AT91_REG DBGU_IDR; // Interrupt Disable Register + AT91_REG DBGU_IMR; // Interrupt Mask Register + AT91_REG DBGU_CSR; // Channel Status Register + AT91_REG DBGU_RHR; // Receiver Holding Register + AT91_REG DBGU_THR; // Transmitter Holding Register + AT91_REG DBGU_BRGR; // Baud Rate Generator Register + AT91_REG Reserved0[7]; // + AT91_REG DBGU_CIDR; // Chip ID Register + AT91_REG DBGU_EXID; // Chip ID Extension Register + AT91_REG DBGU_FNTR; // Force NTRST Register + AT91_REG Reserved1[45]; // + AT91_REG DBGU_RPR; // Receive Pointer Register + AT91_REG DBGU_RCR; // Receive Counter Register + AT91_REG DBGU_TPR; // Transmit Pointer Register + AT91_REG DBGU_TCR; // Transmit Counter Register + AT91_REG DBGU_RNPR; // Receive Next Pointer Register + AT91_REG DBGU_RNCR; // Receive Next Counter Register + AT91_REG DBGU_TNPR; // Transmit Next Pointer Register + AT91_REG DBGU_TNCR; // Transmit Next Counter Register + AT91_REG DBGU_PTCR; // PDC Transfer Control Register + AT91_REG DBGU_PTSR; // PDC Transfer Status Register +} AT91S_DBGU, *AT91PS_DBGU; +#else +#define DBGU_CR (AT91_CAST(AT91_REG *) 0x00000000) // (DBGU_CR) Control Register +#define DBGU_MR (AT91_CAST(AT91_REG *) 0x00000004) // (DBGU_MR) Mode Register +#define DBGU_IER (AT91_CAST(AT91_REG *) 0x00000008) // (DBGU_IER) Interrupt Enable Register +#define DBGU_IDR (AT91_CAST(AT91_REG *) 0x0000000C) // (DBGU_IDR) Interrupt Disable Register +#define DBGU_IMR (AT91_CAST(AT91_REG *) 0x00000010) // (DBGU_IMR) Interrupt Mask Register +#define DBGU_CSR (AT91_CAST(AT91_REG *) 0x00000014) // (DBGU_CSR) Channel Status Register +#define DBGU_RHR (AT91_CAST(AT91_REG *) 0x00000018) // (DBGU_RHR) Receiver Holding Register +#define DBGU_THR (AT91_CAST(AT91_REG *) 0x0000001C) // (DBGU_THR) Transmitter Holding Register +#define DBGU_BRGR (AT91_CAST(AT91_REG *) 0x00000020) // (DBGU_BRGR) Baud Rate Generator Register +//#define DBGU_CIDR (AT91_CAST(AT91_REG *) 0x00000040) // (DBGU_CIDR) Chip ID Register +#define DBGU_EXID (AT91_CAST(AT91_REG *) 0x00000044) // (DBGU_EXID) Chip ID Extension Register +#define DBGU_FNTR (AT91_CAST(AT91_REG *) 0x00000048) // (DBGU_FNTR) Force NTRST Register + +#endif +// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_RSTRX (0x1 << 2) // (DBGU) Reset Receiver +#define AT91C_US_RSTTX (0x1 << 3) // (DBGU) Reset Transmitter +#define AT91C_US_RXEN (0x1 << 4) // (DBGU) Receiver Enable +#define AT91C_US_RXDIS (0x1 << 5) // (DBGU) Receiver Disable +#define AT91C_US_TXEN (0x1 << 6) // (DBGU) Transmitter Enable +#define AT91C_US_TXDIS (0x1 << 7) // (DBGU) Transmitter Disable +#define AT91C_US_RSTSTA (0x1 << 8) // (DBGU) Reset Status Bits +// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_PAR (0x7 << 9) // (DBGU) Parity type +#define AT91C_US_PAR_EVEN (0x0 << 9) // (DBGU) Even Parity +#define AT91C_US_PAR_ODD (0x1 << 9) // (DBGU) Odd Parity +#define AT91C_US_PAR_SPACE (0x2 << 9) // (DBGU) Parity forced to 0 (Space) +#define AT91C_US_PAR_MARK (0x3 << 9) // (DBGU) Parity forced to 1 (Mark) +#define AT91C_US_PAR_NONE (0x4 << 9) // (DBGU) No Parity +#define AT91C_US_PAR_MULTI_DROP (0x6 << 9) // (DBGU) Multi-drop mode +#define AT91C_US_CHMODE (0x3 << 14) // (DBGU) Channel Mode +#define AT91C_US_CHMODE_NORMAL (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. +#define AT91C_US_CHMODE_AUTO (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. +#define AT91C_US_CHMODE_LOCAL (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. +#define AT91C_US_CHMODE_REMOTE (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. +// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXRDY (0x1 << 0) // (DBGU) RXRDY Interrupt +#define AT91C_US_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt +#define AT91C_US_ENDRX (0x1 << 3) // (DBGU) End of Receive Transfer Interrupt +#define AT91C_US_ENDTX (0x1 << 4) // (DBGU) End of Transmit Interrupt +#define AT91C_US_OVRE (0x1 << 5) // (DBGU) Overrun Interrupt +#define AT91C_US_FRAME (0x1 << 6) // (DBGU) Framing Error Interrupt +#define AT91C_US_PARE (0x1 << 7) // (DBGU) Parity Error Interrupt +#define AT91C_US_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt +#define AT91C_US_TXBUFE (0x1 << 11) // (DBGU) TXBUFE Interrupt +#define AT91C_US_RXBUFF (0x1 << 12) // (DBGU) RXBUFF Interrupt +#define AT91C_US_COMM_TX (0x1 << 30) // (DBGU) COMM_TX Interrupt +#define AT91C_US_COMM_RX (0x1 << 31) // (DBGU) COMM_RX Interrupt +// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- +// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- +#define AT91C_US_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Parallel Input Output Controler +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PIO { + AT91_REG PIO_PER; // PIO Enable Register + AT91_REG PIO_PDR; // PIO Disable Register + AT91_REG PIO_PSR; // PIO Status Register + AT91_REG Reserved0[1]; // + AT91_REG PIO_OER; // Output Enable Register + AT91_REG PIO_ODR; // Output Disable Registerr + AT91_REG PIO_OSR; // Output Status Register + AT91_REG Reserved1[1]; // + AT91_REG PIO_IFER; // Input Filter Enable Register + AT91_REG PIO_IFDR; // Input Filter Disable Register + AT91_REG PIO_IFSR; // Input Filter Status Register + AT91_REG Reserved2[1]; // + AT91_REG PIO_SODR; // Set Output Data Register + AT91_REG PIO_CODR; // Clear Output Data Register + AT91_REG PIO_ODSR; // Output Data Status Register + AT91_REG PIO_PDSR; // Pin Data Status Register + AT91_REG PIO_IER; // Interrupt Enable Register + AT91_REG PIO_IDR; // Interrupt Disable Register + AT91_REG PIO_IMR; // Interrupt Mask Register + AT91_REG PIO_ISR; // Interrupt Status Register + AT91_REG PIO_MDER; // Multi-driver Enable Register + AT91_REG PIO_MDDR; // Multi-driver Disable Register + AT91_REG PIO_MDSR; // Multi-driver Status Register + AT91_REG Reserved3[1]; // + AT91_REG PIO_PPUDR; // Pull-up Disable Register + AT91_REG PIO_PPUER; // Pull-up Enable Register + AT91_REG PIO_PPUSR; // Pull-up Status Register + AT91_REG Reserved4[1]; // + AT91_REG PIO_ASR; // Select A Register + AT91_REG PIO_BSR; // Select B Register + AT91_REG PIO_ABSR; // AB Select Status Register + AT91_REG Reserved5[9]; // + AT91_REG PIO_OWER; // Output Write Enable Register + AT91_REG PIO_OWDR; // Output Write Disable Register + AT91_REG PIO_OWSR; // Output Write Status Register +} AT91S_PIO, *AT91PS_PIO; +#else +#define PIO_PER (AT91_CAST(AT91_REG *) 0x00000000) // (PIO_PER) PIO Enable Register +#define PIO_PDR (AT91_CAST(AT91_REG *) 0x00000004) // (PIO_PDR) PIO Disable Register +#define PIO_PSR (AT91_CAST(AT91_REG *) 0x00000008) // (PIO_PSR) PIO Status Register +#define PIO_OER (AT91_CAST(AT91_REG *) 0x00000010) // (PIO_OER) Output Enable Register +#define PIO_ODR (AT91_CAST(AT91_REG *) 0x00000014) // (PIO_ODR) Output Disable Registerr +#define PIO_OSR (AT91_CAST(AT91_REG *) 0x00000018) // (PIO_OSR) Output Status Register +#define PIO_IFER (AT91_CAST(AT91_REG *) 0x00000020) // (PIO_IFER) Input Filter Enable Register +#define PIO_IFDR (AT91_CAST(AT91_REG *) 0x00000024) // (PIO_IFDR) Input Filter Disable Register +#define PIO_IFSR (AT91_CAST(AT91_REG *) 0x00000028) // (PIO_IFSR) Input Filter Status Register +#define PIO_SODR (AT91_CAST(AT91_REG *) 0x00000030) // (PIO_SODR) Set Output Data Register +#define PIO_CODR (AT91_CAST(AT91_REG *) 0x00000034) // (PIO_CODR) Clear Output Data Register +#define PIO_ODSR (AT91_CAST(AT91_REG *) 0x00000038) // (PIO_ODSR) Output Data Status Register +#define PIO_PDSR (AT91_CAST(AT91_REG *) 0x0000003C) // (PIO_PDSR) Pin Data Status Register +#define PIO_IER (AT91_CAST(AT91_REG *) 0x00000040) // (PIO_IER) Interrupt Enable Register +#define PIO_IDR (AT91_CAST(AT91_REG *) 0x00000044) // (PIO_IDR) Interrupt Disable Register +#define PIO_IMR (AT91_CAST(AT91_REG *) 0x00000048) // (PIO_IMR) Interrupt Mask Register +#define PIO_ISR (AT91_CAST(AT91_REG *) 0x0000004C) // (PIO_ISR) Interrupt Status Register +#define PIO_MDER (AT91_CAST(AT91_REG *) 0x00000050) // (PIO_MDER) Multi-driver Enable Register +#define PIO_MDDR (AT91_CAST(AT91_REG *) 0x00000054) // (PIO_MDDR) Multi-driver Disable Register +#define PIO_MDSR (AT91_CAST(AT91_REG *) 0x00000058) // (PIO_MDSR) Multi-driver Status Register +#define PIO_PPUDR (AT91_CAST(AT91_REG *) 0x00000060) // (PIO_PPUDR) Pull-up Disable Register +#define PIO_PPUER (AT91_CAST(AT91_REG *) 0x00000064) // (PIO_PPUER) Pull-up Enable Register +#define PIO_PPUSR (AT91_CAST(AT91_REG *) 0x00000068) // (PIO_PPUSR) Pull-up Status Register +#define PIO_ASR (AT91_CAST(AT91_REG *) 0x00000070) // (PIO_ASR) Select A Register +#define PIO_BSR (AT91_CAST(AT91_REG *) 0x00000074) // (PIO_BSR) Select B Register +#define PIO_ABSR (AT91_CAST(AT91_REG *) 0x00000078) // (PIO_ABSR) AB Select Status Register +#define PIO_OWER (AT91_CAST(AT91_REG *) 0x000000A0) // (PIO_OWER) Output Write Enable Register +#define PIO_OWDR (AT91_CAST(AT91_REG *) 0x000000A4) // (PIO_OWDR) Output Write Disable Register +#define PIO_OWSR (AT91_CAST(AT91_REG *) 0x000000A8) // (PIO_OWSR) Output Write Status Register + +#endif + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Clock Generator Controler +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_CKGR { + AT91_REG CKGR_MOR; // Main Oscillator Register + AT91_REG CKGR_MCFR; // Main Clock Frequency Register + AT91_REG Reserved0[1]; // + AT91_REG CKGR_PLLR; // PLL Register +} AT91S_CKGR, *AT91PS_CKGR; +#else +#define CKGR_MOR (AT91_CAST(AT91_REG *) 0x00000000) // (CKGR_MOR) Main Oscillator Register +#define CKGR_MCFR (AT91_CAST(AT91_REG *) 0x00000004) // (CKGR_MCFR) Main Clock Frequency Register +#define CKGR_PLLR (AT91_CAST(AT91_REG *) 0x0000000C) // (CKGR_PLLR) PLL Register + +#endif +// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- +#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable +#define AT91C_CKGR_OSCBYPASS (0x1 << 1) // (CKGR) Main Oscillator Bypass +#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time +// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- +#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency +#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready +// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register -------- +#define AT91C_CKGR_DIV (0xFF << 0) // (CKGR) Divider Selected +#define AT91C_CKGR_DIV_0 (0x0) // (CKGR) Divider output is 0 +#define AT91C_CKGR_DIV_BYPASS (0x1) // (CKGR) Divider is bypassed +#define AT91C_CKGR_PLLCOUNT (0x3F << 8) // (CKGR) PLL Counter +#define AT91C_CKGR_OUT (0x3 << 14) // (CKGR) PLL Output Frequency Range +#define AT91C_CKGR_OUT_0 (0x0 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_OUT_1 (0x1 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_OUT_2 (0x2 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_OUT_3 (0x3 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_MUL (0x7FF << 16) // (CKGR) PLL Multiplier +#define AT91C_CKGR_USBDIV (0x3 << 28) // (CKGR) Divider for USB Clocks +#define AT91C_CKGR_USBDIV_0 (0x0 << 28) // (CKGR) Divider output is PLL clock output +#define AT91C_CKGR_USBDIV_1 (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2 +#define AT91C_CKGR_USBDIV_2 (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4 + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Power Management Controler +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PMC { + AT91_REG PMC_SCER; // System Clock Enable Register + AT91_REG PMC_SCDR; // System Clock Disable Register + AT91_REG PMC_SCSR; // System Clock Status Register + AT91_REG Reserved0[1]; // + AT91_REG PMC_PCER; // Peripheral Clock Enable Register + AT91_REG PMC_PCDR; // Peripheral Clock Disable Register + AT91_REG PMC_PCSR; // Peripheral Clock Status Register + AT91_REG Reserved1[1]; // + AT91_REG PMC_MOR; // Main Oscillator Register + AT91_REG PMC_MCFR; // Main Clock Frequency Register + AT91_REG Reserved2[1]; // + AT91_REG PMC_PLLR; // PLL Register + AT91_REG PMC_MCKR; // Master Clock Register + AT91_REG Reserved3[3]; // + AT91_REG PMC_PCKR[3]; // Programmable Clock Register + AT91_REG Reserved4[5]; // + AT91_REG PMC_IER; // Interrupt Enable Register + AT91_REG PMC_IDR; // Interrupt Disable Register + AT91_REG PMC_SR; // Status Register + AT91_REG PMC_IMR; // Interrupt Mask Register +} AT91S_PMC, *AT91PS_PMC; +#else +#define PMC_SCER (AT91_CAST(AT91_REG *) 0x00000000) // (PMC_SCER) System Clock Enable Register +#define PMC_SCDR (AT91_CAST(AT91_REG *) 0x00000004) // (PMC_SCDR) System Clock Disable Register +#define PMC_SCSR (AT91_CAST(AT91_REG *) 0x00000008) // (PMC_SCSR) System Clock Status Register +#define PMC_PCER (AT91_CAST(AT91_REG *) 0x00000010) // (PMC_PCER) Peripheral Clock Enable Register +#define PMC_PCDR (AT91_CAST(AT91_REG *) 0x00000014) // (PMC_PCDR) Peripheral Clock Disable Register +#define PMC_PCSR (AT91_CAST(AT91_REG *) 0x00000018) // (PMC_PCSR) Peripheral Clock Status Register +#define PMC_MCKR (AT91_CAST(AT91_REG *) 0x00000030) // (PMC_MCKR) Master Clock Register +#define PMC_PCKR (AT91_CAST(AT91_REG *) 0x00000040) // (PMC_PCKR) Programmable Clock Register +#define PMC_IER (AT91_CAST(AT91_REG *) 0x00000060) // (PMC_IER) Interrupt Enable Register +#define PMC_IDR (AT91_CAST(AT91_REG *) 0x00000064) // (PMC_IDR) Interrupt Disable Register +#define PMC_SR (AT91_CAST(AT91_REG *) 0x00000068) // (PMC_SR) Status Register +#define PMC_IMR (AT91_CAST(AT91_REG *) 0x0000006C) // (PMC_IMR) Interrupt Mask Register + +#endif +// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- +#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock +#define AT91C_PMC_UDP (0x1 << 7) // (PMC) USB Device Port Clock +#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output +// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- +// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- +// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- +// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- +// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register -------- +// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- +#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection +#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected +#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected +#define AT91C_PMC_CSS_PLL_CLK (0x3) // (PMC) Clock from PLL is selected +#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler +#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock +#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2 +#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4 +#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8 +#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16 +#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32 +#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64 +// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- +// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- +#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask +#define AT91C_PMC_LOCK (0x1 << 2) // (PMC) PLL Status/Enable/Disable/Mask +#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask +// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- +// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- +// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Reset Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_RSTC { + AT91_REG RSTC_RCR; // Reset Control Register + AT91_REG RSTC_RSR; // Reset Status Register + AT91_REG RSTC_RMR; // Reset Mode Register +} AT91S_RSTC, *AT91PS_RSTC; +#else +#define RSTC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (RSTC_RCR) Reset Control Register +#define RSTC_RSR (AT91_CAST(AT91_REG *) 0x00000004) // (RSTC_RSR) Reset Status Register +#define RSTC_RMR (AT91_CAST(AT91_REG *) 0x00000008) // (RSTC_RMR) Reset Mode Register + +#endif +// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- +#define AT91C_RSTC_PROCRST (0x1 << 0) // (RSTC) Processor Reset +#define AT91C_RSTC_PERRST (0x1 << 2) // (RSTC) Peripheral Reset +#define AT91C_RSTC_EXTRST (0x1 << 3) // (RSTC) External Reset +#define AT91C_RSTC_KEY (0xFF << 24) // (RSTC) Password +// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register -------- +#define AT91C_RSTC_URSTS (0x1 << 0) // (RSTC) User Reset Status +#define AT91C_RSTC_BODSTS (0x1 << 1) // (RSTC) Brownout Detection Status +#define AT91C_RSTC_RSTTYP (0x7 << 8) // (RSTC) Reset Type +#define AT91C_RSTC_RSTTYP_POWERUP (0x0 << 8) // (RSTC) Power-up Reset. VDDCORE rising. +#define AT91C_RSTC_RSTTYP_WAKEUP (0x1 << 8) // (RSTC) WakeUp Reset. VDDCORE rising. +#define AT91C_RSTC_RSTTYP_WATCHDOG (0x2 << 8) // (RSTC) Watchdog Reset. Watchdog overflow occured. +#define AT91C_RSTC_RSTTYP_SOFTWARE (0x3 << 8) // (RSTC) Software Reset. Processor reset required by the software. +#define AT91C_RSTC_RSTTYP_USER (0x4 << 8) // (RSTC) User Reset. NRST pin detected low. +#define AT91C_RSTC_RSTTYP_BROWNOUT (0x5 << 8) // (RSTC) Brownout Reset occured. +#define AT91C_RSTC_NRSTL (0x1 << 16) // (RSTC) NRST pin level +#define AT91C_RSTC_SRCMP (0x1 << 17) // (RSTC) Software Reset Command in Progress. +// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register -------- +#define AT91C_RSTC_URSTEN (0x1 << 0) // (RSTC) User Reset Enable +#define AT91C_RSTC_URSTIEN (0x1 << 4) // (RSTC) User Reset Interrupt Enable +#define AT91C_RSTC_ERSTL (0xF << 8) // (RSTC) User Reset Length +#define AT91C_RSTC_BODIEN (0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Real Time Timer Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_RTTC { + AT91_REG RTTC_RTMR; // Real-time Mode Register + AT91_REG RTTC_RTAR; // Real-time Alarm Register + AT91_REG RTTC_RTVR; // Real-time Value Register + AT91_REG RTTC_RTSR; // Real-time Status Register +} AT91S_RTTC, *AT91PS_RTTC; +#else +#define RTTC_RTMR (AT91_CAST(AT91_REG *) 0x00000000) // (RTTC_RTMR) Real-time Mode Register +#define RTTC_RTAR (AT91_CAST(AT91_REG *) 0x00000004) // (RTTC_RTAR) Real-time Alarm Register +#define RTTC_RTVR (AT91_CAST(AT91_REG *) 0x00000008) // (RTTC_RTVR) Real-time Value Register +#define RTTC_RTSR (AT91_CAST(AT91_REG *) 0x0000000C) // (RTTC_RTSR) Real-time Status Register + +#endif +// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register -------- +#define AT91C_RTTC_RTPRES (0xFFFF << 0) // (RTTC) Real-time Timer Prescaler Value +#define AT91C_RTTC_ALMIEN (0x1 << 16) // (RTTC) Alarm Interrupt Enable +#define AT91C_RTTC_RTTINCIEN (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable +#define AT91C_RTTC_RTTRST (0x1 << 18) // (RTTC) Real Time Timer Restart +// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register -------- +#define AT91C_RTTC_ALMV (0x0 << 0) // (RTTC) Alarm Value +// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register -------- +#define AT91C_RTTC_CRTV (0x0 << 0) // (RTTC) Current Real-time Value +// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register -------- +#define AT91C_RTTC_ALMS (0x1 << 0) // (RTTC) Real-time Alarm Status +#define AT91C_RTTC_RTTINC (0x1 << 1) // (RTTC) Real-time Timer Increment + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Periodic Interval Timer Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PITC { + AT91_REG PITC_PIMR; // Period Interval Mode Register + AT91_REG PITC_PISR; // Period Interval Status Register + AT91_REG PITC_PIVR; // Period Interval Value Register + AT91_REG PITC_PIIR; // Period Interval Image Register +} AT91S_PITC, *AT91PS_PITC; +#else +#define PITC_PIMR (AT91_CAST(AT91_REG *) 0x00000000) // (PITC_PIMR) Period Interval Mode Register +#define PITC_PISR (AT91_CAST(AT91_REG *) 0x00000004) // (PITC_PISR) Period Interval Status Register +#define PITC_PIVR (AT91_CAST(AT91_REG *) 0x00000008) // (PITC_PIVR) Period Interval Value Register +#define PITC_PIIR (AT91_CAST(AT91_REG *) 0x0000000C) // (PITC_PIIR) Period Interval Image Register + +#endif +// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register -------- +#define AT91C_PITC_PIV (0xFFFFF << 0) // (PITC) Periodic Interval Value +#define AT91C_PITC_PITEN (0x1 << 24) // (PITC) Periodic Interval Timer Enabled +#define AT91C_PITC_PITIEN (0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable +// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register -------- +#define AT91C_PITC_PITS (0x1 << 0) // (PITC) Periodic Interval Timer Status +// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register -------- +#define AT91C_PITC_CPIV (0xFFFFF << 0) // (PITC) Current Periodic Interval Value +#define AT91C_PITC_PICNT (0xFFF << 20) // (PITC) Periodic Interval Counter +// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Watchdog Timer Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_WDTC { + AT91_REG WDTC_WDCR; // Watchdog Control Register + AT91_REG WDTC_WDMR; // Watchdog Mode Register + AT91_REG WDTC_WDSR; // Watchdog Status Register +} AT91S_WDTC, *AT91PS_WDTC; +#else +#define WDTC_WDCR (AT91_CAST(AT91_REG *) 0x00000000) // (WDTC_WDCR) Watchdog Control Register +#define WDTC_WDMR (AT91_CAST(AT91_REG *) 0x00000004) // (WDTC_WDMR) Watchdog Mode Register +#define WDTC_WDSR (AT91_CAST(AT91_REG *) 0x00000008) // (WDTC_WDSR) Watchdog Status Register + +#endif +// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register -------- +#define AT91C_WDTC_WDRSTT (0x1 << 0) // (WDTC) Watchdog Restart +#define AT91C_WDTC_KEY (0xFF << 24) // (WDTC) Watchdog KEY Password +// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- +#define AT91C_WDTC_WDV (0xFFF << 0) // (WDTC) Watchdog Timer Restart +#define AT91C_WDTC_WDFIEN (0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable +#define AT91C_WDTC_WDRSTEN (0x1 << 13) // (WDTC) Watchdog Reset Enable +#define AT91C_WDTC_WDRPROC (0x1 << 14) // (WDTC) Watchdog Timer Restart +#define AT91C_WDTC_WDDIS (0x1 << 15) // (WDTC) Watchdog Disable +#define AT91C_WDTC_WDD (0xFFF << 16) // (WDTC) Watchdog Delta Value +#define AT91C_WDTC_WDDBGHLT (0x1 << 28) // (WDTC) Watchdog Debug Halt +#define AT91C_WDTC_WDIDLEHLT (0x1 << 29) // (WDTC) Watchdog Idle Halt +// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- +#define AT91C_WDTC_WDUNF (0x1 << 0) // (WDTC) Watchdog Underflow +#define AT91C_WDTC_WDERR (0x1 << 1) // (WDTC) Watchdog Error + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Voltage Regulator Mode Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_VREG { + AT91_REG VREG_MR; // Voltage Regulator Mode Register +} AT91S_VREG, *AT91PS_VREG; +#else +#define VREG_MR (AT91_CAST(AT91_REG *) 0x00000000) // (VREG_MR) Voltage Regulator Mode Register + +#endif +// -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register -------- +#define AT91C_VREG_PSTDBY (0x1 << 0) // (VREG) Voltage Regulator Power Standby Mode + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Embedded Flash Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_EFC { + AT91_REG EFC_FMR; // MC Flash Mode Register + AT91_REG EFC_FCR; // MC Flash Command Register + AT91_REG EFC_FSR; // MC Flash Status Register + AT91_REG EFC_VR; // MC Flash Version Register +} AT91S_EFC, *AT91PS_EFC; +#else +#define MC_FMR (AT91_CAST(AT91_REG *) 0x00000000) // (MC_FMR) MC Flash Mode Register +#define MC_FCR (AT91_CAST(AT91_REG *) 0x00000004) // (MC_FCR) MC Flash Command Register +#define MC_FSR (AT91_CAST(AT91_REG *) 0x00000008) // (MC_FSR) MC Flash Status Register +#define MC_VR (AT91_CAST(AT91_REG *) 0x0000000C) // (MC_VR) MC Flash Version Register + +#endif +// -------- MC_FMR : (EFC Offset: 0x0) MC Flash Mode Register -------- +#define AT91C_MC_FRDY (0x1 << 0) // (EFC) Flash Ready +#define AT91C_MC_LOCKE (0x1 << 2) // (EFC) Lock Error +#define AT91C_MC_PROGE (0x1 << 3) // (EFC) Programming Error +#define AT91C_MC_NEBP (0x1 << 7) // (EFC) No Erase Before Programming +#define AT91C_MC_FWS (0x3 << 8) // (EFC) Flash Wait State +#define AT91C_MC_FWS_0FWS (0x0 << 8) // (EFC) 1 cycle for Read, 2 for Write operations +#define AT91C_MC_FWS_1FWS (0x1 << 8) // (EFC) 2 cycles for Read, 3 for Write operations +#define AT91C_MC_FWS_2FWS (0x2 << 8) // (EFC) 3 cycles for Read, 4 for Write operations +#define AT91C_MC_FWS_3FWS (0x3 << 8) // (EFC) 4 cycles for Read, 4 for Write operations +#define AT91C_MC_FMCN (0xFF << 16) // (EFC) Flash Microsecond Cycle Number +// -------- MC_FCR : (EFC Offset: 0x4) MC Flash Command Register -------- +#define AT91C_MC_FCMD (0xF << 0) // (EFC) Flash Command +#define AT91C_MC_FCMD_START_PROG (0x1) // (EFC) Starts the programming of th epage specified by PAGEN. +#define AT91C_MC_FCMD_LOCK (0x2) // (EFC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN. +#define AT91C_MC_FCMD_PROG_AND_LOCK (0x3) // (EFC) The lock sequence automatically happens after the programming sequence is completed. +#define AT91C_MC_FCMD_UNLOCK (0x4) // (EFC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN. +#define AT91C_MC_FCMD_ERASE_ALL (0x8) // (EFC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled. +#define AT91C_MC_FCMD_SET_GP_NVM (0xB) // (EFC) Set General Purpose NVM bits. +#define AT91C_MC_FCMD_CLR_GP_NVM (0xD) // (EFC) Clear General Purpose NVM bits. +#define AT91C_MC_FCMD_SET_SECURITY (0xF) // (EFC) Set Security Bit. +#define AT91C_MC_PAGEN (0x3FF << 8) // (EFC) Page Number +#define AT91C_MC_KEY (0xFF << 24) // (EFC) Writing Protect Key +// -------- MC_FSR : (EFC Offset: 0x8) MC Flash Command Register -------- +#define AT91C_MC_SECURITY (0x1 << 4) // (EFC) Security Bit Status +#define AT91C_MC_GPNVM0 (0x1 << 8) // (EFC) Sector 0 Lock Status +#define AT91C_MC_GPNVM1 (0x1 << 9) // (EFC) Sector 1 Lock Status +#define AT91C_MC_GPNVM2 (0x1 << 10) // (EFC) Sector 2 Lock Status +#define AT91C_MC_GPNVM3 (0x1 << 11) // (EFC) Sector 3 Lock Status +#define AT91C_MC_GPNVM4 (0x1 << 12) // (EFC) Sector 4 Lock Status +#define AT91C_MC_GPNVM5 (0x1 << 13) // (EFC) Sector 5 Lock Status +#define AT91C_MC_GPNVM6 (0x1 << 14) // (EFC) Sector 6 Lock Status +#define AT91C_MC_GPNVM7 (0x1 << 15) // (EFC) Sector 7 Lock Status +#define AT91C_MC_LOCKS0 (0x1 << 16) // (EFC) Sector 0 Lock Status +#define AT91C_MC_LOCKS1 (0x1 << 17) // (EFC) Sector 1 Lock Status +#define AT91C_MC_LOCKS2 (0x1 << 18) // (EFC) Sector 2 Lock Status +#define AT91C_MC_LOCKS3 (0x1 << 19) // (EFC) Sector 3 Lock Status +#define AT91C_MC_LOCKS4 (0x1 << 20) // (EFC) Sector 4 Lock Status +#define AT91C_MC_LOCKS5 (0x1 << 21) // (EFC) Sector 5 Lock Status +#define AT91C_MC_LOCKS6 (0x1 << 22) // (EFC) Sector 6 Lock Status +#define AT91C_MC_LOCKS7 (0x1 << 23) // (EFC) Sector 7 Lock Status +#define AT91C_MC_LOCKS8 (0x1 << 24) // (EFC) Sector 8 Lock Status +#define AT91C_MC_LOCKS9 (0x1 << 25) // (EFC) Sector 9 Lock Status +#define AT91C_MC_LOCKS10 (0x1 << 26) // (EFC) Sector 10 Lock Status +#define AT91C_MC_LOCKS11 (0x1 << 27) // (EFC) Sector 11 Lock Status +#define AT91C_MC_LOCKS12 (0x1 << 28) // (EFC) Sector 12 Lock Status +#define AT91C_MC_LOCKS13 (0x1 << 29) // (EFC) Sector 13 Lock Status +#define AT91C_MC_LOCKS14 (0x1 << 30) // (EFC) Sector 14 Lock Status +#define AT91C_MC_LOCKS15 (0x1 << 31) // (EFC) Sector 15 Lock Status +// -------- EFC_VR : (EFC Offset: 0xc) EFC version register -------- +#define AT91C_EFC_VERSION (0xFFF << 0) // (EFC) EFC version number +#define AT91C_EFC_MFN (0x7 << 16) // (EFC) EFC MFN + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Memory Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_MC { + AT91_REG MC_RCR; // MC Remap Control Register + AT91_REG MC_ASR; // MC Abort Status Register + AT91_REG MC_AASR; // MC Abort Address Status Register + AT91_REG Reserved0[1]; // + AT91_REG MC_PUIA[16]; // MC Protection Unit Area + AT91_REG MC_PUP; // MC Protection Unit Peripherals + AT91_REG MC_PUER; // MC Protection Unit Enable Register + AT91_REG Reserved1[2]; // + AT91_REG MC0_FMR; // MC Flash Mode Register + AT91_REG MC0_FCR; // MC Flash Command Register + AT91_REG MC0_FSR; // MC Flash Status Register + AT91_REG MC0_VR; // MC Flash Version Register + AT91_REG MC1_FMR; // MC Flash Mode Register + AT91_REG MC1_FCR; // MC Flash Command Register + AT91_REG MC1_FSR; // MC Flash Status Register + AT91_REG MC1_VR; // MC Flash Version Register +} AT91S_MC, *AT91PS_MC; +#else +#define MC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (MC_RCR) MC Remap Control Register +#define MC_ASR (AT91_CAST(AT91_REG *) 0x00000004) // (MC_ASR) MC Abort Status Register +#define MC_AASR (AT91_CAST(AT91_REG *) 0x00000008) // (MC_AASR) MC Abort Address Status Register +#define MC_PUIA (AT91_CAST(AT91_REG *) 0x00000010) // (MC_PUIA) MC Protection Unit Area +#define MC_PUP (AT91_CAST(AT91_REG *) 0x00000050) // (MC_PUP) MC Protection Unit Peripherals +#define MC_PUER (AT91_CAST(AT91_REG *) 0x00000054) // (MC_PUER) MC Protection Unit Enable Register + +#endif +// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- +#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit +// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- +#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status +#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status +#define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status +#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status +#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte +#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word +#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word +#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status +#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read +#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write +#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch +#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source +#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source +#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source +#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source +// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- +#define AT91C_MC_PROT (0x3 << 0) // (MC) Protection +#define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access +#define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access +#define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only +#define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write +#define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size +#define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte +#define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte +#define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte +#define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte +#define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte +#define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte +#define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte +#define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte +#define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte +#define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte +#define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte +#define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte +#define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte +#define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte +#define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte +#define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte +#define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address +// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- +// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- +#define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Serial Parallel Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_SPI { + AT91_REG SPI_CR; // Control Register + AT91_REG SPI_MR; // Mode Register + AT91_REG SPI_RDR; // Receive Data Register + AT91_REG SPI_TDR; // Transmit Data Register + AT91_REG SPI_SR; // Status Register + AT91_REG SPI_IER; // Interrupt Enable Register + AT91_REG SPI_IDR; // Interrupt Disable Register + AT91_REG SPI_IMR; // Interrupt Mask Register + AT91_REG Reserved0[4]; // + AT91_REG SPI_CSR[4]; // Chip Select Register + AT91_REG Reserved1[48]; // + AT91_REG SPI_RPR; // Receive Pointer Register + AT91_REG SPI_RCR; // Receive Counter Register + AT91_REG SPI_TPR; // Transmit Pointer Register + AT91_REG SPI_TCR; // Transmit Counter Register + AT91_REG SPI_RNPR; // Receive Next Pointer Register + AT91_REG SPI_RNCR; // Receive Next Counter Register + AT91_REG SPI_TNPR; // Transmit Next Pointer Register + AT91_REG SPI_TNCR; // Transmit Next Counter Register + AT91_REG SPI_PTCR; // PDC Transfer Control Register + AT91_REG SPI_PTSR; // PDC Transfer Status Register +} AT91S_SPI, *AT91PS_SPI; +#else +#define SPI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SPI_CR) Control Register +#define SPI_MR (AT91_CAST(AT91_REG *) 0x00000004) // (SPI_MR) Mode Register +#define SPI_RDR (AT91_CAST(AT91_REG *) 0x00000008) // (SPI_RDR) Receive Data Register +#define SPI_TDR (AT91_CAST(AT91_REG *) 0x0000000C) // (SPI_TDR) Transmit Data Register +#define SPI_SR (AT91_CAST(AT91_REG *) 0x00000010) // (SPI_SR) Status Register +#define SPI_IER (AT91_CAST(AT91_REG *) 0x00000014) // (SPI_IER) Interrupt Enable Register +#define SPI_IDR (AT91_CAST(AT91_REG *) 0x00000018) // (SPI_IDR) Interrupt Disable Register +#define SPI_IMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SPI_IMR) Interrupt Mask Register +#define SPI_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (SPI_CSR) Chip Select Register + +#endif +// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- +#define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable +#define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable +#define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset +#define AT91C_SPI_LASTXFER (0x1 << 24) // (SPI) SPI Last Transfer +// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- +#define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode +#define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select +#define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select +#define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select +#define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode +#define AT91C_SPI_FDIV (0x1 << 3) // (SPI) Clock Selection +#define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection +#define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection +#define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select +#define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects +// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- +#define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data +#define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- +#define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data +#define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- +#define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full +#define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty +#define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error +#define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status +#define AT91C_SPI_ENDRX (0x1 << 4) // (SPI) End of Receiver Transfer +#define AT91C_SPI_ENDTX (0x1 << 5) // (SPI) End of Receiver Transfer +#define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt +#define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt +#define AT91C_SPI_NSSR (0x1 << 8) // (SPI) NSSR Interrupt +#define AT91C_SPI_TXEMPTY (0x1 << 9) // (SPI) TXEMPTY Interrupt +#define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status +// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- +// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- +// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- +// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- +#define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity +#define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase +#define AT91C_SPI_CSAAT (0x1 << 3) // (SPI) Chip Select Active After Transfer +#define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer +#define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer +#define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer +#define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer +#define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer +#define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer +#define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer +#define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer +#define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer +#define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer +#define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate +#define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Delay Before SPCK +#define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Analog to Digital Convertor +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_ADC { + AT91_REG ADC_CR; // ADC Control Register + AT91_REG ADC_MR; // ADC Mode Register + AT91_REG Reserved0[2]; // + AT91_REG ADC_CHER; // ADC Channel Enable Register + AT91_REG ADC_CHDR; // ADC Channel Disable Register + AT91_REG ADC_CHSR; // ADC Channel Status Register + AT91_REG ADC_SR; // ADC Status Register + AT91_REG ADC_LCDR; // ADC Last Converted Data Register + AT91_REG ADC_IER; // ADC Interrupt Enable Register + AT91_REG ADC_IDR; // ADC Interrupt Disable Register + AT91_REG ADC_IMR; // ADC Interrupt Mask Register + AT91_REG ADC_CDR[8]; // ADC Channel Data Register + AT91_REG Reserved1[44]; // + AT91_REG ADC_RPR; // Receive Pointer Register + AT91_REG ADC_RCR; // Receive Counter Register + AT91_REG ADC_TPR; // Transmit Pointer Register + AT91_REG ADC_TCR; // Transmit Counter Register + AT91_REG ADC_RNPR; // Receive Next Pointer Register + AT91_REG ADC_RNCR; // Receive Next Counter Register + AT91_REG ADC_TNPR; // Transmit Next Pointer Register + AT91_REG ADC_TNCR; // Transmit Next Counter Register + AT91_REG ADC_PTCR; // PDC Transfer Control Register + AT91_REG ADC_PTSR; // PDC Transfer Status Register +} AT91S_ADC, *AT91PS_ADC; +#else +#define ADC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (ADC_CR) ADC Control Register +#define ADC_MR (AT91_CAST(AT91_REG *) 0x00000004) // (ADC_MR) ADC Mode Register +#define ADC_CHER (AT91_CAST(AT91_REG *) 0x00000010) // (ADC_CHER) ADC Channel Enable Register +#define ADC_CHDR (AT91_CAST(AT91_REG *) 0x00000014) // (ADC_CHDR) ADC Channel Disable Register +#define ADC_CHSR (AT91_CAST(AT91_REG *) 0x00000018) // (ADC_CHSR) ADC Channel Status Register +#define ADC_SR (AT91_CAST(AT91_REG *) 0x0000001C) // (ADC_SR) ADC Status Register +#define ADC_LCDR (AT91_CAST(AT91_REG *) 0x00000020) // (ADC_LCDR) ADC Last Converted Data Register +#define ADC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (ADC_IER) ADC Interrupt Enable Register +#define ADC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (ADC_IDR) ADC Interrupt Disable Register +#define ADC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (ADC_IMR) ADC Interrupt Mask Register +#define ADC_CDR0 (AT91_CAST(AT91_REG *) 0x00000030) // (ADC_CDR0) ADC Channel Data Register 0 +#define ADC_CDR1 (AT91_CAST(AT91_REG *) 0x00000034) // (ADC_CDR1) ADC Channel Data Register 1 +#define ADC_CDR2 (AT91_CAST(AT91_REG *) 0x00000038) // (ADC_CDR2) ADC Channel Data Register 2 +#define ADC_CDR3 (AT91_CAST(AT91_REG *) 0x0000003C) // (ADC_CDR3) ADC Channel Data Register 3 +#define ADC_CDR4 (AT91_CAST(AT91_REG *) 0x00000040) // (ADC_CDR4) ADC Channel Data Register 4 +#define ADC_CDR5 (AT91_CAST(AT91_REG *) 0x00000044) // (ADC_CDR5) ADC Channel Data Register 5 +#define ADC_CDR6 (AT91_CAST(AT91_REG *) 0x00000048) // (ADC_CDR6) ADC Channel Data Register 6 +#define ADC_CDR7 (AT91_CAST(AT91_REG *) 0x0000004C) // (ADC_CDR7) ADC Channel Data Register 7 + +#endif +// -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register -------- +#define AT91C_ADC_SWRST (0x1 << 0) // (ADC) Software Reset +#define AT91C_ADC_START (0x1 << 1) // (ADC) Start Conversion +// -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register -------- +#define AT91C_ADC_TRGEN (0x1 << 0) // (ADC) Trigger Enable +#define AT91C_ADC_TRGEN_DIS (0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software +#define AT91C_ADC_TRGEN_EN (0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled. +#define AT91C_ADC_TRGSEL (0x7 << 1) // (ADC) Trigger Selection +#define AT91C_ADC_TRGSEL_TIOA0 (0x0 << 1) // (ADC) Selected TRGSEL = TIAO0 +#define AT91C_ADC_TRGSEL_TIOA1 (0x1 << 1) // (ADC) Selected TRGSEL = TIAO1 +#define AT91C_ADC_TRGSEL_TIOA2 (0x2 << 1) // (ADC) Selected TRGSEL = TIAO2 +#define AT91C_ADC_TRGSEL_TIOA3 (0x3 << 1) // (ADC) Selected TRGSEL = TIAO3 +#define AT91C_ADC_TRGSEL_TIOA4 (0x4 << 1) // (ADC) Selected TRGSEL = TIAO4 +#define AT91C_ADC_TRGSEL_TIOA5 (0x5 << 1) // (ADC) Selected TRGSEL = TIAO5 +#define AT91C_ADC_TRGSEL_EXT (0x6 << 1) // (ADC) Selected TRGSEL = External Trigger +#define AT91C_ADC_LOWRES (0x1 << 4) // (ADC) Resolution. +#define AT91C_ADC_LOWRES_10_BIT (0x0 << 4) // (ADC) 10-bit resolution +#define AT91C_ADC_LOWRES_8_BIT (0x1 << 4) // (ADC) 8-bit resolution +#define AT91C_ADC_SLEEP (0x1 << 5) // (ADC) Sleep Mode +#define AT91C_ADC_SLEEP_NORMAL_MODE (0x0 << 5) // (ADC) Normal Mode +#define AT91C_ADC_SLEEP_MODE (0x1 << 5) // (ADC) Sleep Mode +#define AT91C_ADC_PRESCAL (0x3F << 8) // (ADC) Prescaler rate selection +#define AT91C_ADC_STARTUP (0x1F << 16) // (ADC) Startup Time +#define AT91C_ADC_SHTIM (0xF << 24) // (ADC) Sample & Hold Time +// -------- ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register -------- +#define AT91C_ADC_CH0 (0x1 << 0) // (ADC) Channel 0 +#define AT91C_ADC_CH1 (0x1 << 1) // (ADC) Channel 1 +#define AT91C_ADC_CH2 (0x1 << 2) // (ADC) Channel 2 +#define AT91C_ADC_CH3 (0x1 << 3) // (ADC) Channel 3 +#define AT91C_ADC_CH4 (0x1 << 4) // (ADC) Channel 4 +#define AT91C_ADC_CH5 (0x1 << 5) // (ADC) Channel 5 +#define AT91C_ADC_CH6 (0x1 << 6) // (ADC) Channel 6 +#define AT91C_ADC_CH7 (0x1 << 7) // (ADC) Channel 7 +// -------- ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register -------- +// -------- ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register -------- +// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register -------- +#define AT91C_ADC_EOC0 (0x1 << 0) // (ADC) End of Conversion +#define AT91C_ADC_EOC1 (0x1 << 1) // (ADC) End of Conversion +#define AT91C_ADC_EOC2 (0x1 << 2) // (ADC) End of Conversion +#define AT91C_ADC_EOC3 (0x1 << 3) // (ADC) End of Conversion +#define AT91C_ADC_EOC4 (0x1 << 4) // (ADC) End of Conversion +#define AT91C_ADC_EOC5 (0x1 << 5) // (ADC) End of Conversion +#define AT91C_ADC_EOC6 (0x1 << 6) // (ADC) End of Conversion +#define AT91C_ADC_EOC7 (0x1 << 7) // (ADC) End of Conversion +#define AT91C_ADC_OVRE0 (0x1 << 8) // (ADC) Overrun Error +#define AT91C_ADC_OVRE1 (0x1 << 9) // (ADC) Overrun Error +#define AT91C_ADC_OVRE2 (0x1 << 10) // (ADC) Overrun Error +#define AT91C_ADC_OVRE3 (0x1 << 11) // (ADC) Overrun Error +#define AT91C_ADC_OVRE4 (0x1 << 12) // (ADC) Overrun Error +#define AT91C_ADC_OVRE5 (0x1 << 13) // (ADC) Overrun Error +#define AT91C_ADC_OVRE6 (0x1 << 14) // (ADC) Overrun Error +#define AT91C_ADC_OVRE7 (0x1 << 15) // (ADC) Overrun Error +#define AT91C_ADC_DRDY (0x1 << 16) // (ADC) Data Ready +#define AT91C_ADC_GOVRE (0x1 << 17) // (ADC) General Overrun +#define AT91C_ADC_ENDRX (0x1 << 18) // (ADC) End of Receiver Transfer +#define AT91C_ADC_RXBUFF (0x1 << 19) // (ADC) RXBUFF Interrupt +// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register -------- +#define AT91C_ADC_LDATA (0x3FF << 0) // (ADC) Last Data Converted +// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register -------- +// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register -------- +// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register -------- +// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 -------- +#define AT91C_ADC_DATA (0x3FF << 0) // (ADC) Converted Data +// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 -------- +// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 -------- +// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 -------- +// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 -------- +// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 -------- +// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 -------- +// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_SSC { + AT91_REG SSC_CR; // Control Register + AT91_REG SSC_CMR; // Clock Mode Register + AT91_REG Reserved0[2]; // + AT91_REG SSC_RCMR; // Receive Clock ModeRegister + AT91_REG SSC_RFMR; // Receive Frame Mode Register + AT91_REG SSC_TCMR; // Transmit Clock Mode Register + AT91_REG SSC_TFMR; // Transmit Frame Mode Register + AT91_REG SSC_RHR; // Receive Holding Register + AT91_REG SSC_THR; // Transmit Holding Register + AT91_REG Reserved1[2]; // + AT91_REG SSC_RSHR; // Receive Sync Holding Register + AT91_REG SSC_TSHR; // Transmit Sync Holding Register + AT91_REG Reserved2[2]; // + AT91_REG SSC_SR; // Status Register + AT91_REG SSC_IER; // Interrupt Enable Register + AT91_REG SSC_IDR; // Interrupt Disable Register + AT91_REG SSC_IMR; // Interrupt Mask Register + AT91_REG Reserved3[44]; // + AT91_REG SSC_RPR; // Receive Pointer Register + AT91_REG SSC_RCR; // Receive Counter Register + AT91_REG SSC_TPR; // Transmit Pointer Register + AT91_REG SSC_TCR; // Transmit Counter Register + AT91_REG SSC_RNPR; // Receive Next Pointer Register + AT91_REG SSC_RNCR; // Receive Next Counter Register + AT91_REG SSC_TNPR; // Transmit Next Pointer Register + AT91_REG SSC_TNCR; // Transmit Next Counter Register + AT91_REG SSC_PTCR; // PDC Transfer Control Register + AT91_REG SSC_PTSR; // PDC Transfer Status Register +} AT91S_SSC, *AT91PS_SSC; +#else +#define SSC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SSC_CR) Control Register +#define SSC_CMR (AT91_CAST(AT91_REG *) 0x00000004) // (SSC_CMR) Clock Mode Register +#define SSC_RCMR (AT91_CAST(AT91_REG *) 0x00000010) // (SSC_RCMR) Receive Clock ModeRegister +#define SSC_RFMR (AT91_CAST(AT91_REG *) 0x00000014) // (SSC_RFMR) Receive Frame Mode Register +#define SSC_TCMR (AT91_CAST(AT91_REG *) 0x00000018) // (SSC_TCMR) Transmit Clock Mode Register +#define SSC_TFMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SSC_TFMR) Transmit Frame Mode Register +#define SSC_RHR (AT91_CAST(AT91_REG *) 0x00000020) // (SSC_RHR) Receive Holding Register +#define SSC_THR (AT91_CAST(AT91_REG *) 0x00000024) // (SSC_THR) Transmit Holding Register +#define SSC_RSHR (AT91_CAST(AT91_REG *) 0x00000030) // (SSC_RSHR) Receive Sync Holding Register +#define SSC_TSHR (AT91_CAST(AT91_REG *) 0x00000034) // (SSC_TSHR) Transmit Sync Holding Register +#define SSC_SR (AT91_CAST(AT91_REG *) 0x00000040) // (SSC_SR) Status Register +#define SSC_IER (AT91_CAST(AT91_REG *) 0x00000044) // (SSC_IER) Interrupt Enable Register +#define SSC_IDR (AT91_CAST(AT91_REG *) 0x00000048) // (SSC_IDR) Interrupt Disable Register +#define SSC_IMR (AT91_CAST(AT91_REG *) 0x0000004C) // (SSC_IMR) Interrupt Mask Register + +#endif +// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- +#define AT91C_SSC_RXEN (0x1 << 0) // (SSC) Receive Enable +#define AT91C_SSC_RXDIS (0x1 << 1) // (SSC) Receive Disable +#define AT91C_SSC_TXEN (0x1 << 8) // (SSC) Transmit Enable +#define AT91C_SSC_TXDIS (0x1 << 9) // (SSC) Transmit Disable +#define AT91C_SSC_SWRST (0x1 << 15) // (SSC) Software Reset +// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- +#define AT91C_SSC_CKS (0x3 << 0) // (SSC) Receive/Transmit Clock Selection +#define AT91C_SSC_CKS_DIV (0x0) // (SSC) Divided Clock +#define AT91C_SSC_CKS_TK (0x1) // (SSC) TK Clock signal +#define AT91C_SSC_CKS_RK (0x2) // (SSC) RK pin +#define AT91C_SSC_CKO (0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection +#define AT91C_SSC_CKO_NONE (0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only +#define AT91C_SSC_CKO_CONTINOUS (0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output +#define AT91C_SSC_CKO_DATA_TX (0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output +#define AT91C_SSC_CKI (0x1 << 5) // (SSC) Receive/Transmit Clock Inversion +#define AT91C_SSC_START (0xF << 8) // (SSC) Receive/Transmit Start Selection +#define AT91C_SSC_START_CONTINOUS (0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. +#define AT91C_SSC_START_TX (0x1 << 8) // (SSC) Transmit/Receive start +#define AT91C_SSC_START_LOW_RF (0x2 << 8) // (SSC) Detection of a low level on RF input +#define AT91C_SSC_START_HIGH_RF (0x3 << 8) // (SSC) Detection of a high level on RF input +#define AT91C_SSC_START_FALL_RF (0x4 << 8) // (SSC) Detection of a falling edge on RF input +#define AT91C_SSC_START_RISE_RF (0x5 << 8) // (SSC) Detection of a rising edge on RF input +#define AT91C_SSC_START_LEVEL_RF (0x6 << 8) // (SSC) Detection of any level change on RF input +#define AT91C_SSC_START_EDGE_RF (0x7 << 8) // (SSC) Detection of any edge on RF input +#define AT91C_SSC_START_0 (0x8 << 8) // (SSC) Compare 0 +#define AT91C_SSC_STTDLY (0xFF << 16) // (SSC) Receive/Transmit Start Delay +#define AT91C_SSC_PERIOD (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection +// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- +#define AT91C_SSC_DATLEN (0x1F << 0) // (SSC) Data Length +#define AT91C_SSC_LOOP (0x1 << 5) // (SSC) Loop Mode +#define AT91C_SSC_MSBF (0x1 << 7) // (SSC) Most Significant Bit First +#define AT91C_SSC_DATNB (0xF << 8) // (SSC) Data Number per Frame +#define AT91C_SSC_FSLEN (0xF << 16) // (SSC) Receive/Transmit Frame Sync length +#define AT91C_SSC_FSOS (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection +#define AT91C_SSC_FSOS_NONE (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only +#define AT91C_SSC_FSOS_NEGATIVE (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse +#define AT91C_SSC_FSOS_POSITIVE (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse +#define AT91C_SSC_FSOS_LOW (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer +#define AT91C_SSC_FSOS_HIGH (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer +#define AT91C_SSC_FSOS_TOGGLE (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer +#define AT91C_SSC_FSEDGE (0x1 << 24) // (SSC) Frame Sync Edge Detection +// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- +// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- +#define AT91C_SSC_DATDEF (0x1 << 5) // (SSC) Data Default Value +#define AT91C_SSC_FSDEN (0x1 << 23) // (SSC) Frame Sync Data Enable +// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- +#define AT91C_SSC_TXRDY (0x1 << 0) // (SSC) Transmit Ready +#define AT91C_SSC_TXEMPTY (0x1 << 1) // (SSC) Transmit Empty +#define AT91C_SSC_ENDTX (0x1 << 2) // (SSC) End Of Transmission +#define AT91C_SSC_TXBUFE (0x1 << 3) // (SSC) Transmit Buffer Empty +#define AT91C_SSC_RXRDY (0x1 << 4) // (SSC) Receive Ready +#define AT91C_SSC_OVRUN (0x1 << 5) // (SSC) Receive Overrun +#define AT91C_SSC_ENDRX (0x1 << 6) // (SSC) End of Reception +#define AT91C_SSC_RXBUFF (0x1 << 7) // (SSC) Receive Buffer Full +#define AT91C_SSC_TXSYN (0x1 << 10) // (SSC) Transmit Sync +#define AT91C_SSC_RXSYN (0x1 << 11) // (SSC) Receive Sync +#define AT91C_SSC_TXENA (0x1 << 16) // (SSC) Transmit Enable +#define AT91C_SSC_RXENA (0x1 << 17) // (SSC) Receive Enable +// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- +// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- +// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Usart +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_USART { + AT91_REG US_CR; // Control Register + AT91_REG US_MR; // Mode Register + AT91_REG US_IER; // Interrupt Enable Register + AT91_REG US_IDR; // Interrupt Disable Register + AT91_REG US_IMR; // Interrupt Mask Register + AT91_REG US_CSR; // Channel Status Register + AT91_REG US_RHR; // Receiver Holding Register + AT91_REG US_THR; // Transmitter Holding Register + AT91_REG US_BRGR; // Baud Rate Generator Register + AT91_REG US_RTOR; // Receiver Time-out Register + AT91_REG US_TTGR; // Transmitter Time-guard Register + AT91_REG Reserved0[5]; // + AT91_REG US_FIDI; // FI_DI_Ratio Register + AT91_REG US_NER; // Nb Errors Register + AT91_REG Reserved1[1]; // + AT91_REG US_IF; // IRDA_FILTER Register + AT91_REG Reserved2[44]; // + AT91_REG US_RPR; // Receive Pointer Register + AT91_REG US_RCR; // Receive Counter Register + AT91_REG US_TPR; // Transmit Pointer Register + AT91_REG US_TCR; // Transmit Counter Register + AT91_REG US_RNPR; // Receive Next Pointer Register + AT91_REG US_RNCR; // Receive Next Counter Register + AT91_REG US_TNPR; // Transmit Next Pointer Register + AT91_REG US_TNCR; // Transmit Next Counter Register + AT91_REG US_PTCR; // PDC Transfer Control Register + AT91_REG US_PTSR; // PDC Transfer Status Register +} AT91S_USART, *AT91PS_USART; +#else +#define US_CR (AT91_CAST(AT91_REG *) 0x00000000) // (US_CR) Control Register +#define US_MR (AT91_CAST(AT91_REG *) 0x00000004) // (US_MR) Mode Register +#define US_IER (AT91_CAST(AT91_REG *) 0x00000008) // (US_IER) Interrupt Enable Register +#define US_IDR (AT91_CAST(AT91_REG *) 0x0000000C) // (US_IDR) Interrupt Disable Register +#define US_IMR (AT91_CAST(AT91_REG *) 0x00000010) // (US_IMR) Interrupt Mask Register +#define US_CSR (AT91_CAST(AT91_REG *) 0x00000014) // (US_CSR) Channel Status Register +#define US_RHR (AT91_CAST(AT91_REG *) 0x00000018) // (US_RHR) Receiver Holding Register +#define US_THR (AT91_CAST(AT91_REG *) 0x0000001C) // (US_THR) Transmitter Holding Register +#define US_BRGR (AT91_CAST(AT91_REG *) 0x00000020) // (US_BRGR) Baud Rate Generator Register +#define US_RTOR (AT91_CAST(AT91_REG *) 0x00000024) // (US_RTOR) Receiver Time-out Register +#define US_TTGR (AT91_CAST(AT91_REG *) 0x00000028) // (US_TTGR) Transmitter Time-guard Register +#define US_FIDI (AT91_CAST(AT91_REG *) 0x00000040) // (US_FIDI) FI_DI_Ratio Register +#define US_NER (AT91_CAST(AT91_REG *) 0x00000044) // (US_NER) Nb Errors Register +#define US_IF (AT91_CAST(AT91_REG *) 0x0000004C) // (US_IF) IRDA_FILTER Register + +#endif +// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_STTBRK (0x1 << 9) // (USART) Start Break +#define AT91C_US_STPBRK (0x1 << 10) // (USART) Stop Break +#define AT91C_US_STTTO (0x1 << 11) // (USART) Start Time-out +#define AT91C_US_SENDA (0x1 << 12) // (USART) Send Address +#define AT91C_US_RSTIT (0x1 << 13) // (USART) Reset Iterations +#define AT91C_US_RSTNACK (0x1 << 14) // (USART) Reset Non Acknowledge +#define AT91C_US_RETTO (0x1 << 15) // (USART) Rearm Time-out +#define AT91C_US_DTREN (0x1 << 16) // (USART) Data Terminal ready Enable +#define AT91C_US_DTRDIS (0x1 << 17) // (USART) Data Terminal ready Disable +#define AT91C_US_RTSEN (0x1 << 18) // (USART) Request to Send enable +#define AT91C_US_RTSDIS (0x1 << 19) // (USART) Request to Send Disable +// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_USMODE (0xF << 0) // (USART) Usart mode +#define AT91C_US_USMODE_NORMAL (0x0) // (USART) Normal +#define AT91C_US_USMODE_RS485 (0x1) // (USART) RS485 +#define AT91C_US_USMODE_HWHSH (0x2) // (USART) Hardware Handshaking +#define AT91C_US_USMODE_MODEM (0x3) // (USART) Modem +#define AT91C_US_USMODE_ISO7816_0 (0x4) // (USART) ISO7816 protocol: T = 0 +#define AT91C_US_USMODE_ISO7816_1 (0x6) // (USART) ISO7816 protocol: T = 1 +#define AT91C_US_USMODE_IRDA (0x8) // (USART) IrDA +#define AT91C_US_USMODE_SWHSH (0xC) // (USART) Software Handshaking +#define AT91C_US_CLKS (0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CLKS_CLOCK (0x0 << 4) // (USART) Clock +#define AT91C_US_CLKS_FDIV1 (0x1 << 4) // (USART) fdiv1 +#define AT91C_US_CLKS_SLOW (0x2 << 4) // (USART) slow_clock (ARM) +#define AT91C_US_CLKS_EXT (0x3 << 4) // (USART) External (SCK) +#define AT91C_US_CHRL (0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CHRL_5_BITS (0x0 << 6) // (USART) Character Length: 5 bits +#define AT91C_US_CHRL_6_BITS (0x1 << 6) // (USART) Character Length: 6 bits +#define AT91C_US_CHRL_7_BITS (0x2 << 6) // (USART) Character Length: 7 bits +#define AT91C_US_CHRL_8_BITS (0x3 << 6) // (USART) Character Length: 8 bits +#define AT91C_US_SYNC (0x1 << 8) // (USART) Synchronous Mode Select +#define AT91C_US_NBSTOP (0x3 << 12) // (USART) Number of Stop bits +#define AT91C_US_NBSTOP_1_BIT (0x0 << 12) // (USART) 1 stop bit +#define AT91C_US_NBSTOP_15_BIT (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits +#define AT91C_US_NBSTOP_2_BIT (0x2 << 12) // (USART) 2 stop bits +#define AT91C_US_MSBF (0x1 << 16) // (USART) Bit Order +#define AT91C_US_MODE9 (0x1 << 17) // (USART) 9-bit Character length +#define AT91C_US_CKLO (0x1 << 18) // (USART) Clock Output Select +#define AT91C_US_OVER (0x1 << 19) // (USART) Over Sampling Mode +#define AT91C_US_INACK (0x1 << 20) // (USART) Inhibit Non Acknowledge +#define AT91C_US_DSNACK (0x1 << 21) // (USART) Disable Successive NACK +#define AT91C_US_MAX_ITER (0x1 << 24) // (USART) Number of Repetitions +#define AT91C_US_FILTER (0x1 << 28) // (USART) Receive Line Filter +// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXBRK (0x1 << 2) // (USART) Break Received/End of Break +#define AT91C_US_TIMEOUT (0x1 << 8) // (USART) Receiver Time-out +#define AT91C_US_ITERATION (0x1 << 10) // (USART) Max number of Repetitions Reached +#define AT91C_US_NACK (0x1 << 13) // (USART) Non Acknowledge +#define AT91C_US_RIIC (0x1 << 16) // (USART) Ring INdicator Input Change Flag +#define AT91C_US_DSRIC (0x1 << 17) // (USART) Data Set Ready Input Change Flag +#define AT91C_US_DCDIC (0x1 << 18) // (USART) Data Carrier Flag +#define AT91C_US_CTSIC (0x1 << 19) // (USART) Clear To Send Input Change Flag +// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- +#define AT91C_US_RI (0x1 << 20) // (USART) Image of RI Input +#define AT91C_US_DSR (0x1 << 21) // (USART) Image of DSR Input +#define AT91C_US_DCD (0x1 << 22) // (USART) Image of DCD Input +#define AT91C_US_CTS (0x1 << 23) // (USART) Image of CTS Input + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Two-wire Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_TWI { + AT91_REG TWI_CR; // Control Register + AT91_REG TWI_MMR; // Master Mode Register + AT91_REG Reserved0[1]; // + AT91_REG TWI_IADR; // Internal Address Register + AT91_REG TWI_CWGR; // Clock Waveform Generator Register + AT91_REG Reserved1[3]; // + AT91_REG TWI_SR; // Status Register + AT91_REG TWI_IER; // Interrupt Enable Register + AT91_REG TWI_IDR; // Interrupt Disable Register + AT91_REG TWI_IMR; // Interrupt Mask Register + AT91_REG TWI_RHR; // Receive Holding Register + AT91_REG TWI_THR; // Transmit Holding Register + AT91_REG Reserved2[50]; // + AT91_REG TWI_RPR; // Receive Pointer Register + AT91_REG TWI_RCR; // Receive Counter Register + AT91_REG TWI_TPR; // Transmit Pointer Register + AT91_REG TWI_TCR; // Transmit Counter Register + AT91_REG TWI_RNPR; // Receive Next Pointer Register + AT91_REG TWI_RNCR; // Receive Next Counter Register + AT91_REG TWI_TNPR; // Transmit Next Pointer Register + AT91_REG TWI_TNCR; // Transmit Next Counter Register + AT91_REG TWI_PTCR; // PDC Transfer Control Register + AT91_REG TWI_PTSR; // PDC Transfer Status Register +} AT91S_TWI, *AT91PS_TWI; +#else +#define TWI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (TWI_CR) Control Register +#define TWI_MMR (AT91_CAST(AT91_REG *) 0x00000004) // (TWI_MMR) Master Mode Register +#define TWI_IADR (AT91_CAST(AT91_REG *) 0x0000000C) // (TWI_IADR) Internal Address Register +#define TWI_CWGR (AT91_CAST(AT91_REG *) 0x00000010) // (TWI_CWGR) Clock Waveform Generator Register +#define TWI_SR (AT91_CAST(AT91_REG *) 0x00000020) // (TWI_SR) Status Register +#define TWI_IER (AT91_CAST(AT91_REG *) 0x00000024) // (TWI_IER) Interrupt Enable Register +#define TWI_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (TWI_IDR) Interrupt Disable Register +#define TWI_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (TWI_IMR) Interrupt Mask Register +#define TWI_RHR (AT91_CAST(AT91_REG *) 0x00000030) // (TWI_RHR) Receive Holding Register +#define TWI_THR (AT91_CAST(AT91_REG *) 0x00000034) // (TWI_THR) Transmit Holding Register + +#endif +// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- +#define AT91C_TWI_START (0x1 << 0) // (TWI) Send a START Condition +#define AT91C_TWI_STOP (0x1 << 1) // (TWI) Send a STOP Condition +#define AT91C_TWI_MSEN (0x1 << 2) // (TWI) TWI Master Transfer Enabled +#define AT91C_TWI_MSDIS (0x1 << 3) // (TWI) TWI Master Transfer Disabled +#define AT91C_TWI_SWRST (0x1 << 7) // (TWI) Software Reset +// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- +#define AT91C_TWI_IADRSZ (0x3 << 8) // (TWI) Internal Device Address Size +#define AT91C_TWI_IADRSZ_NO (0x0 << 8) // (TWI) No internal device address +#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) // (TWI) One-byte internal device address +#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) // (TWI) Two-byte internal device address +#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) // (TWI) Three-byte internal device address +#define AT91C_TWI_MREAD (0x1 << 12) // (TWI) Master Read Direction +#define AT91C_TWI_DADR (0x7F << 16) // (TWI) Device Address +// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- +#define AT91C_TWI_CLDIV (0xFF << 0) // (TWI) Clock Low Divider +#define AT91C_TWI_CHDIV (0xFF << 8) // (TWI) Clock High Divider +#define AT91C_TWI_CKDIV (0x7 << 16) // (TWI) Clock Divider +// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- +#define AT91C_TWI_TXCOMP (0x1 << 0) // (TWI) Transmission Completed +#define AT91C_TWI_RXRDY (0x1 << 1) // (TWI) Receive holding register ReaDY +#define AT91C_TWI_TXRDY (0x1 << 2) // (TWI) Transmit holding register ReaDY +#define AT91C_TWI_OVRE (0x1 << 6) // (TWI) Overrun Error +#define AT91C_TWI_UNRE (0x1 << 7) // (TWI) Underrun Error +#define AT91C_TWI_NACK (0x1 << 8) // (TWI) Not Acknowledged +#define AT91C_TWI_ENDRX (0x1 << 12) // (TWI) +#define AT91C_TWI_ENDTX (0x1 << 13) // (TWI) +#define AT91C_TWI_RXBUFF (0x1 << 14) // (TWI) +#define AT91C_TWI_TXBUFE (0x1 << 15) // (TWI) +// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- +// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- +// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_TC { + AT91_REG TC_CCR; // Channel Control Register + AT91_REG TC_CMR; // Channel Mode Register (Capture Mode / Waveform Mode) + AT91_REG Reserved0[2]; // + AT91_REG TC_CV; // Counter Value + AT91_REG TC_RA; // Register A + AT91_REG TC_RB; // Register B + AT91_REG TC_RC; // Register C + AT91_REG TC_SR; // Status Register + AT91_REG TC_IER; // Interrupt Enable Register + AT91_REG TC_IDR; // Interrupt Disable Register + AT91_REG TC_IMR; // Interrupt Mask Register +} AT91S_TC, *AT91PS_TC; +#else +#define TC_CCR (AT91_CAST(AT91_REG *) 0x00000000) // (TC_CCR) Channel Control Register +#define TC_CMR (AT91_CAST(AT91_REG *) 0x00000004) // (TC_CMR) Channel Mode Register (Capture Mode / Waveform Mode) +#define TC_CV (AT91_CAST(AT91_REG *) 0x00000010) // (TC_CV) Counter Value +#define TC_RA (AT91_CAST(AT91_REG *) 0x00000014) // (TC_RA) Register A +#define TC_RB (AT91_CAST(AT91_REG *) 0x00000018) // (TC_RB) Register B +#define TC_RC (AT91_CAST(AT91_REG *) 0x0000001C) // (TC_RC) Register C +#define TC_SR (AT91_CAST(AT91_REG *) 0x00000020) // (TC_SR) Status Register +#define TC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (TC_IER) Interrupt Enable Register +#define TC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (TC_IDR) Interrupt Disable Register +#define TC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (TC_IMR) Interrupt Mask Register + +#endif +// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- +#define AT91C_TC_CLKEN (0x1 << 0) // (TC) Counter Clock Enable Command +#define AT91C_TC_CLKDIS (0x1 << 1) // (TC) Counter Clock Disable Command +#define AT91C_TC_SWTRG (0x1 << 2) // (TC) Software Trigger Command +// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- +#define AT91C_TC_CLKS (0x7 << 0) // (TC) Clock Selection +#define AT91C_TC_CLKS_TIMER_DIV1_CLOCK (0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV2_CLOCK (0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV3_CLOCK (0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK +#define T91C_TC_CLKS_TIMER_DIV4_CLOCK (0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV5_CLOCK (0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK +#define AT91C_TC_CLKS_XC0 (0x5) // (TC) Clock selected: XC0 +#define AT91C_TC_CLKS_XC1 (0x6) // (TC) Clock selected: XC1 +#define AT91C_TC_CLKS_XC2 (0x7) // (TC) Clock selected: XC2 +#define AT91C_TC_CLKI (0x1 << 3) // (TC) Clock Invert +#define AT91C_TC_BURST (0x3 << 4) // (TC) Burst Signal Selection +#define AT91C_TC_BURST_NONE (0x0 << 4) // (TC) The clock is not gated by an external signal +#define AT91C_TC_BURST_XC0 (0x1 << 4) // (TC) XC0 is ANDed with the selected clock +#define AT91C_TC_BURST_XC1 (0x2 << 4) // (TC) XC1 is ANDed with the selected clock +#define AT91C_TC_BURST_XC2 (0x3 << 4) // (TC) XC2 is ANDed with the selected clock +#define AT91C_TC_CPCSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RC Compare +#define AT91C_TC_LDBSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RB Loading +#define AT91C_TC_CPCDIS (0x1 << 7) // (TC) Counter Clock Disable with RC Compare +#define AT91C_TC_LDBDIS (0x1 << 7) // (TC) Counter Clock Disabled with RB Loading +#define AT91C_TC_ETRGEDG (0x3 << 8) // (TC) External Trigger Edge Selection +#define AT91C_TC_ETRGEDG_NONE (0x0 << 8) // (TC) Edge: None +#define AT91C_TC_ETRGEDG_RISING (0x1 << 8) // (TC) Edge: rising edge +#define AT91C_TC_ETRGEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge +#define AT91C_TC_ETRGEDG_BOTH (0x3 << 8) // (TC) Edge: each edge +#define AT91C_TC_EEVTEDG (0x3 << 8) // (TC) External Event Edge Selection +#define AT91C_TC_EEVTEDG_NONE (0x0 << 8) // (TC) Edge: None +#define AT91C_TC_EEVTEDG_RISING (0x1 << 8) // (TC) Edge: rising edge +#define AT91C_TC_EEVTEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge +#define AT91C_TC_EEVTEDG_BOTH (0x3 << 8) // (TC) Edge: each edge +#define AT91C_TC_EEVT (0x3 << 10) // (TC) External Event Selection +#define AT91C_TC_EEVT_TIOB (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input +#define AT91C_TC_EEVT_XC0 (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output +#define AT91C_TC_EEVT_XC1 (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output +#define AT91C_TC_EEVT_XC2 (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output +#define AT91C_TC_ABETRG (0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection +#define AT91C_TC_ENETRG (0x1 << 12) // (TC) External Event Trigger enable +#define AT91C_TC_WAVESEL (0x3 << 13) // (TC) Waveform Selection +#define AT91C_TC_WAVESEL_UP (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UP_AUTO (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN_AUTO (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare +#define AT91C_TC_CPCTRG (0x1 << 14) // (TC) RC Compare Trigger Enable +#define AT91C_TC_WAVE (0x1 << 15) // (TC) +#define AT91C_TC_ACPA (0x3 << 16) // (TC) RA Compare Effect on TIOA +#define T91C_TC_ACPA_NONE (0x0 << 16) // (TC) Effect: none +#define AT91C_TC_ACPA_SET (0x1 << 16) // (TC) Effect: set +#define AT91C_TC_ACPA_CLEAR (0x2 << 16) // (TC) Effect: clear +#define AT91C_TC_ACPA_TOGGLE (0x3 << 16) // (TC) Effect: toggle +#define AT91C_TC_LDRA (0x3 << 16) // (TC) RA Loading Selection +#define T91C_TC_LDRA_NONE (0x0 << 16) // (TC) Edge: None +#define AT91C_TC_LDRA_RISING (0x1 << 16) // (TC) Edge: rising edge of TIOA +#define AT91C_TC_LDRA_FALLING (0x2 << 16) // (TC) Edge: falling edge of TIOA +#define AT91C_TC_LDRA_BOTH (0x3 << 16) // (TC) Edge: each edge of TIOA +#define AT91C_TC_ACPC (0x3 << 18) // (TC) RC Compare Effect on TIOA +#define AT91C_TC_ACPC_NONE (0x0 << 18) // (TC) Effect: none +#define AT91C_TC_ACPC_SET (0x1 << 18) // (TC) Effect: set +#define AT91C_TC_ACPC_CLEAR (0x2 << 18) // (TC) Effect: clear +#define AT91C_TC_ACPC_TOGGLE (0x3 << 18) // (TC) Effect: toggle +#define AT91C_TC_LDRB (0x3 << 18) // (TC) RB Loading Selection +#define AT91C_TC_LDRB_NONE (0x0 << 18) // (TC) Edge: None +#define AT91C_TC_LDRB_RISING (0x1 << 18) // (TC) Edge: rising edge of TIOA +#define AT91C_TC_LDRB_FALLING (0x2 << 18) // (TC) Edge: falling edge of TIOA +#define AT91C_TC_LDRB_BOTH (0x3 << 18) // (TC) Edge: each edge of TIOA +#define AT91C_TC_AEEVT (0x3 << 20) // (TC) External Event Effect on TIOA +#define AT91C_TC_AEEVT_NONE (0x0 << 20) // (TC) Effect: none +#define AT91C_TC_AEEVT_SET (0x1 << 20) // (TC) Effect: set +#define AT91C_TC_AEEVT_CLEAR (0x2 << 20) // (TC) Effect: clear +#define AT91C_TC_AEEVT_TOGGLE (0x3 << 20) // (TC) Effect: toggle +#define AT91C_TC_ASWTRG (0x3 << 22) // (TC) Software Trigger Effect on TIOA +#define AT91C_TC_ASWTRG_NONE (0x0 << 22) // (TC) Effect: none +#define AT91C_TC_ASWTRG_SET (0x1 << 22) // (TC) Effect: set +#define AT91C_TC_ASWTRG_CLEAR (0x2 << 22) // (TC) Effect: clear +#define AT91C_TC_ASWTRG_TOGGLE (0x3 << 22) // (TC) Effect: toggle +#define AT91C_TC_BCPB (0x3 << 24) // (TC) RB Compare Effect on TIOB +#define AT91C_TC_BCPB_NONE (0x0 << 24) // (TC) Effect: none +#define AT91C_TC_BCPB_SET (0x1 << 24) // (TC) Effect: set +#define AT91C_TC_BCPB_CLEAR (0x2 << 24) // (TC) Effect: clear +#define AT91C_TC_BCPB_TOGGLE (0x3 << 24) // (TC) Effect: toggle +#define AT91C_TC_BCPC (0x3 << 26) // (TC) RC Compare Effect on TIOB +#define AT91C_TC_BCPC_NONE (0x0 << 26) // (TC) Effect: none +#define AT91C_TC_BCPC_SET (0x1 << 26) // (TC) Effect: set +#define AT91C_TC_BCPC_CLEAR (0x2 << 26) // (TC) Effect: clear +#define AT91C_TC_BCPC_TOGGLE (0x3 << 26) // (TC) Effect: toggle +#define AT91C_TC_BEEVT (0x3 << 28) // (TC) External Event Effect on TIOB +#define AT91C_TC_BEEVT_NONE (0x0 << 28) // (TC) Effect: none +#define AT91C_TC_BEEVT_SET (0x1 << 28) // (TC) Effect: set +#define AT91C_TC_BEEVT_CLEAR (0x2 << 28) // (TC) Effect: clear +#define AT91C_TC_BEEVT_TOGGLE (0x3 << 28) // (TC) Effect: toggle +#define AT91C_TC_BSWTRG (0x3 << 30) // (TC) Software Trigger Effect on TIOB +#define AT91C_TC_BSWTRG_NONE (0x0 << 30) // (TC) Effect: none +#define AT91C_TC_BSWTRG_SET (0x1 << 30) // (TC) Effect: set +#define AT91C_TC_BSWTRG_CLEAR (0x2 << 30) // (TC) Effect: clear +#define AT91C_TC_BSWTRG_TOGGLE (0x3 << 30) // (TC) Effect: toggle +// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- +#define AT91C_TC_COVFS (0x1 << 0) // (TC) Counter Overflow +#define AT91C_TC_LOVRS (0x1 << 1) // (TC) Load Overrun +#define AT91C_TC_CPAS (0x1 << 2) // (TC) RA Compare +#define AT91C_TC_CPBS (0x1 << 3) // (TC) RB Compare +#define AT91C_TC_CPCS (0x1 << 4) // (TC) RC Compare +#define AT91C_TC_LDRAS (0x1 << 5) // (TC) RA Loading +#define AT91C_TC_LDRBS (0x1 << 6) // (TC) RB Loading +#define AT91C_TC_ETRGS (0x1 << 7) // (TC) External Trigger +#define AT91C_TC_CLKSTA (0x1 << 16) // (TC) Clock Enabling +#define AT91C_TC_MTIOA (0x1 << 17) // (TC) TIOA Mirror +#define AT91C_TC_MTIOB (0x1 << 18) // (TC) TIOA Mirror +// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- +// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- +// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_TCB { + AT91S_TC TCB_TC0; // TC Channel 0 + AT91_REG Reserved0[4]; // + AT91S_TC TCB_TC1; // TC Channel 1 + AT91_REG Reserved1[4]; // + AT91S_TC TCB_TC2; // TC Channel 2 + AT91_REG Reserved2[4]; // + AT91_REG TCB_BCR; // TC Block Control Register + AT91_REG TCB_BMR; // TC Block Mode Register +} AT91S_TCB, *AT91PS_TCB; +#else +#define TCB_BCR (AT91_CAST(AT91_REG *) 0x000000C0) // (TCB_BCR) TC Block Control Register +#define TCB_BMR (AT91_CAST(AT91_REG *) 0x000000C4) // (TCB_BMR) TC Block Mode Register + +#endif +// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- +#define AT91C_TCB_SYNC (0x1 << 0) // (TCB) Synchro Command +// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- +#define AT91C_TCB_TC0XC0S (0x3 << 0) // (TCB) External Clock Signal 0 Selection +#define AT91C_TCB_TC0XC0S_TCLK0 (0x0) // (TCB) TCLK0 connected to XC0 +#define AT91C_TCB_TC0XC0S_NONE (0x1) // (TCB) None signal connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA1 (0x2) // (TCB) TIOA1 connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA2 (0x3) // (TCB) TIOA2 connected to XC0 +#define AT91C_TCB_TC1XC1S (0x3 << 2) // (TCB) External Clock Signal 1 Selection +#define AT91C_TCB_TC1XC1S_TCLK1 (0x0 << 2) // (TCB) TCLK1 connected to XC1 +#define AT91C_TCB_TC1XC1S_NONE (0x1 << 2) // (TCB) None signal connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA0 (0x2 << 2) // (TCB) TIOA0 connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA2 (0x3 << 2) // (TCB) TIOA2 connected to XC1 +#define AT91C_TCB_TC2XC2S (0x3 << 4) // (TCB) External Clock Signal 2 Selection +#define AT91C_TCB_TC2XC2S_TCLK2 (0x0 << 4) // (TCB) TCLK2 connected to XC2 +#define AT91C_TCB_TC2XC2S_NONE (0x1 << 4) // (TCB) None signal connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA0 (0x2 << 4) // (TCB) TIOA0 connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA1 (0x3 << 4) // (TCB) TIOA2 connected to XC2 + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR PWMC Channel Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PWMC_CH { + AT91_REG PWMC_CMR; // Channel Mode Register + AT91_REG PWMC_CDTYR; // Channel Duty Cycle Register + AT91_REG PWMC_CPRDR; // Channel Period Register + AT91_REG PWMC_CCNTR; // Channel Counter Register + AT91_REG PWMC_CUPDR; // Channel Update Register + AT91_REG PWMC_Reserved[3]; // Reserved +} AT91S_PWMC_CH, *AT91PS_PWMC_CH; +#else +#define PWMC_CMR (AT91_CAST(AT91_REG *) 0x00000000) // (PWMC_CMR) Channel Mode Register +#define PWMC_CDTYR (AT91_CAST(AT91_REG *) 0x00000004) // (PWMC_CDTYR) Channel Duty Cycle Register +#define PWMC_CPRDR (AT91_CAST(AT91_REG *) 0x00000008) // (PWMC_CPRDR) Channel Period Register +#define PWMC_CCNTR (AT91_CAST(AT91_REG *) 0x0000000C) // (PWMC_CCNTR) Channel Counter Register +#define PWMC_CUPDR (AT91_CAST(AT91_REG *) 0x00000010) // (PWMC_CUPDR) Channel Update Register +#define Reserved (AT91_CAST(AT91_REG *) 0x00000014) // (Reserved) Reserved + +#endif +// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register -------- +#define AT91C_PWMC_CPRE (0xF << 0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx +#define AT91C_PWMC_CPRE_MCK (0x0) // (PWMC_CH) +#define AT91C_PWMC_CPRE_MCKA (0xB) // (PWMC_CH) +#define AT91C_PWMC_CPRE_MCKB (0xC) // (PWMC_CH) +#define AT91C_PWMC_CALG (0x1 << 8) // (PWMC_CH) Channel Alignment +#define AT91C_PWMC_CPOL (0x1 << 9) // (PWMC_CH) Channel Polarity +#define AT91C_PWMC_CPD (0x1 << 10) // (PWMC_CH) Channel Update Period +// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register -------- +#define AT91C_PWMC_CDTY (0x0 << 0) // (PWMC_CH) Channel Duty Cycle +// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register -------- +#define AT91C_PWMC_CPRD (0x0 << 0) // (PWMC_CH) Channel Period +// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register -------- +#define AT91C_PWMC_CCNT (0x0 << 0) // (PWMC_CH) Channel Counter +// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register -------- +#define AT91C_PWMC_CUPD (0x0 << 0) // (PWMC_CH) Channel Update + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Pulse Width Modulation Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PWMC { + AT91_REG PWMC_MR; // PWMC Mode Register + AT91_REG PWMC_ENA; // PWMC Enable Register + AT91_REG PWMC_DIS; // PWMC Disable Register + AT91_REG PWMC_SR; // PWMC Status Register + AT91_REG PWMC_IER; // PWMC Interrupt Enable Register + AT91_REG PWMC_IDR; // PWMC Interrupt Disable Register + AT91_REG PWMC_IMR; // PWMC Interrupt Mask Register + AT91_REG PWMC_ISR; // PWMC Interrupt Status Register + AT91_REG Reserved0[55]; // + AT91_REG PWMC_VR; // PWMC Version Register + AT91_REG Reserved1[64]; // + AT91S_PWMC_CH PWMC_CH[4]; // PWMC Channel +} AT91S_PWMC, *AT91PS_PWMC; +#else +#define PWMC_MR (AT91_CAST(AT91_REG *) 0x00000000) // (PWMC_MR) PWMC Mode Register +#define PWMC_ENA (AT91_CAST(AT91_REG *) 0x00000004) // (PWMC_ENA) PWMC Enable Register +#define PWMC_DIS (AT91_CAST(AT91_REG *) 0x00000008) // (PWMC_DIS) PWMC Disable Register +#define PWMC_SR (AT91_CAST(AT91_REG *) 0x0000000C) // (PWMC_SR) PWMC Status Register +#define PWMC_IER (AT91_CAST(AT91_REG *) 0x00000010) // (PWMC_IER) PWMC Interrupt Enable Register +#define PWMC_IDR (AT91_CAST(AT91_REG *) 0x00000014) // (PWMC_IDR) PWMC Interrupt Disable Register +#define PWMC_IMR (AT91_CAST(AT91_REG *) 0x00000018) // (PWMC_IMR) PWMC Interrupt Mask Register +#define PWMC_ISR (AT91_CAST(AT91_REG *) 0x0000001C) // (PWMC_ISR) PWMC Interrupt Status Register +#define PWMC_VR (AT91_CAST(AT91_REG *) 0x000000FC) // (PWMC_VR) PWMC Version Register + +#endif +// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register -------- +#define AT91C_PWMC_DIVA (0xFF << 0) // (PWMC) CLKA divide factor. +#define AT91C_PWMC_PREA (0xF << 8) // (PWMC) Divider Input Clock Prescaler A +#define AT91C_PWMC_PREA_MCK (0x0 << 8) // (PWMC) +#define AT91C_PWMC_DIVB (0xFF << 16) // (PWMC) CLKB divide factor. +#define AT91C_PWMC_PREB (0xF << 24) // (PWMC) Divider Input Clock Prescaler B +#define AT91C_PWMC_PREB_MCK (0x0 << 24) // (PWMC) +// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register -------- +#define AT91C_PWMC_CHID0 (0x1 << 0) // (PWMC) Channel ID 0 +#define AT91C_PWMC_CHID1 (0x1 << 1) // (PWMC) Channel ID 1 +#define AT91C_PWMC_CHID2 (0x1 << 2) // (PWMC) Channel ID 2 +#define AT91C_PWMC_CHID3 (0x1 << 3) // (PWMC) Channel ID 3 +// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register -------- +// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register -------- +// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register -------- +// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register -------- +// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register -------- +// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR USB Device Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_UDP { + AT91_REG UDP_NUM; // Frame Number Register + AT91_REG UDP_GLBSTATE; // Global State Register + AT91_REG UDP_FADDR; // Function Address Register + AT91_REG Reserved0[1]; // + AT91_REG UDP_IER; // Interrupt Enable Register + AT91_REG UDP_IDR; // Interrupt Disable Register + AT91_REG UDP_IMR; // Interrupt Mask Register + AT91_REG UDP_ISR; // Interrupt Status Register + AT91_REG UDP_ICR; // Interrupt Clear Register + AT91_REG Reserved1[1]; // + AT91_REG UDP_RSTEP; // Reset Endpoint Register + AT91_REG Reserved2[1]; // + AT91_REG UDP_CSR[4]; // Endpoint Control and Status Register + AT91_REG Reserved3[4]; // + AT91_REG UDP_FDR[4]; // Endpoint FIFO Data Register + AT91_REG Reserved4[5]; // + AT91_REG UDP_TXVC; // Transceiver Control Register +} AT91S_UDP, *AT91PS_UDP; +#else +#define UDP_FRM_NUM (AT91_CAST(AT91_REG *) 0x00000000) // (UDP_FRM_NUM) Frame Number Register +#define UDP_GLBSTATE (AT91_CAST(AT91_REG *) 0x00000004) // (UDP_GLBSTATE) Global State Register +#define UDP_FADDR (AT91_CAST(AT91_REG *) 0x00000008) // (UDP_FADDR) Function Address Register +#define UDP_IER (AT91_CAST(AT91_REG *) 0x00000010) // (UDP_IER) Interrupt Enable Register +#define UDP_IDR (AT91_CAST(AT91_REG *) 0x00000014) // (UDP_IDR) Interrupt Disable Register +#define UDP_IMR (AT91_CAST(AT91_REG *) 0x00000018) // (UDP_IMR) Interrupt Mask Register +#define UDP_ISR (AT91_CAST(AT91_REG *) 0x0000001C) // (UDP_ISR) Interrupt Status Register +#define UDP_ICR (AT91_CAST(AT91_REG *) 0x00000020) // (UDP_ICR) Interrupt Clear Register +#define UDP_RSTEP (AT91_CAST(AT91_REG *) 0x00000028) // (UDP_RSTEP) Reset Endpoint Register +#define UDP_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (UDP_CSR) Endpoint Control and Status Register +#define UDP_FDR (AT91_CAST(AT91_REG *) 0x00000050) // (UDP_FDR) Endpoint FIFO Data Register +#define UDP_TXVC (AT91_CAST(AT91_REG *) 0x00000074) // (UDP_TXVC) Transceiver Control Register + +#endif +// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- +#define AT91C_UDP_FRM_NUM (0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats +#define AT91C_UDP_FRM_ERR (0x1 << 16) // (UDP) Frame Error +#define AT91C_UDP_FRM_OK (0x1 << 17) // (UDP) Frame OK +// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- +#define AT91C_UDP_FADDEN (0x1 << 0) // (UDP) Function Address Enable +#define AT91C_UDP_CONFG (0x1 << 1) // (UDP) Configured +#define AT91C_UDP_ESR (0x1 << 2) // (UDP) Enable Send Resume +#define AT91C_UDP_RSMINPR (0x1 << 3) // (UDP) A Resume Has Been Sent to the Host +#define AT91C_UDP_RMWUPE (0x1 << 4) // (UDP) Remote Wake Up Enable +// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- +#define AT91C_UDP_FADD (0xFF << 0) // (UDP) Function Address Value +#define AT91C_UDP_FEN (0x1 << 8) // (UDP) Function Enable +// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- +#define AT91C_UDP_EPINT0 (0x1 << 0) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT1 (0x1 << 1) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT2 (0x1 << 2) // (UDP) Endpoint 2 Interrupt +#define AT91C_UDP_EPINT3 (0x1 << 3) // (UDP) Endpoint 3 Interrupt +#define AT91C_UDP_RXSUSP (0x1 << 8) // (UDP) USB Suspend Interrupt +#define AT91C_UDP_RXRSM (0x1 << 9) // (UDP) USB Resume Interrupt +#define AT91C_UDP_EXTRSM (0x1 << 10) // (UDP) USB External Resume Interrupt +#define AT91C_UDP_SOFINT (0x1 << 11) // (UDP) USB Start Of frame Interrupt +#define AT91C_UDP_WAKEUP (0x1 << 13) // (UDP) USB Resume Interrupt +// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- +// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- +// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- +#define AT91C_UDP_ENDBUSRES (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt +// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- +// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- +#define AT91C_UDP_EP0 (0x1 << 0) // (UDP) Reset Endpoint 0 +#define AT91C_UDP_EP1 (0x1 << 1) // (UDP) Reset Endpoint 1 +#define AT91C_UDP_EP2 (0x1 << 2) // (UDP) Reset Endpoint 2 +#define AT91C_UDP_EP3 (0x1 << 3) // (UDP) Reset Endpoint 3 +// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- +#define AT91C_UDP_TXCOMP (0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR +#define AT91C_UDP_RX_DATA_BK0 (0x1 << 1) // (UDP) Receive Data Bank 0 +#define AT91C_UDP_RXSETUP (0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) +#define AT91C_UDP_ISOERROR (0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) +#define AT91C_UDP_STALLSENT (0x1 << 3) // (UDP) Stall sent (Control, bulk, interrupt endpoints) +#define AT91C_UDP_TXPKTRDY (0x1 << 4) // (UDP) Transmit Packet Ready +#define AT91C_UDP_FORCESTALL (0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). +#define AT91C_UDP_RX_DATA_BK1 (0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). +#define AT91C_UDP_DIR (0x1 << 7) // (UDP) Transfer Direction +#define AT91C_UDP_EPTYPE (0x7 << 8) // (UDP) Endpoint type +#define AT91C_UDP_EPTYPE_CTRL (0x0 << 8) // (UDP) Control +#define AT91C_UDP_EPTYPE_ISO_OUT (0x1 << 8) // (UDP) Isochronous OUT +#define AT91C_UDP_EPTYPE_BULK_OUT (0x2 << 8) // (UDP) Bulk OUT +#define AT91C_UDP_EPTYPE_INT_OUT (0x3 << 8) // (UDP) Interrupt OUT +#define AT91C_UDP_EPTYPE_ISO_IN (0x5 << 8) // (UDP) Isochronous IN +#define AT91C_UDP_EPTYPE_BULK_IN (0x6 << 8) // (UDP) Bulk IN +#define AT91C_UDP_EPTYPE_INT_IN (0x7 << 8) // (UDP) Interrupt IN +#define AT91C_UDP_DTGLE (0x1 << 11) // (UDP) Data Toggle +#define AT91C_UDP_EPEDS (0x1 << 15) // (UDP) Endpoint Enable Disable +#define AT91C_UDP_RXBYTECNT (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO +// -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register -------- +#define AT91C_UDP_TXVDIS (0x1 << 8) // (UDP) + +// ***************************************************************************** +// REGISTER ADDRESS DEFINITION FOR AT91SAM7S512 +// ***************************************************************************** +// ========== Register definition for SYS peripheral ========== +// ========== Register definition for AIC peripheral ========== +#define AT91C_AIC_IVR (AT91_CAST(AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register +#define AT91C_AIC_SMR (AT91_CAST(AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register +#define AT91C_AIC_FVR (AT91_CAST(AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register +#define AT91C_AIC_DCR (AT91_CAST(AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect) +#define AT91C_AIC_EOICR (AT91_CAST(AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register +#define AT91C_AIC_SVR (AT91_CAST(AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register +#define AT91C_AIC_FFSR (AT91_CAST(AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register +#define AT91C_AIC_ICCR (AT91_CAST(AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register +#define AT91C_AIC_ISR (AT91_CAST(AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register +#define AT91C_AIC_IMR (AT91_CAST(AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register +#define AT91C_AIC_IPR (AT91_CAST(AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register +#define AT91C_AIC_FFER (AT91_CAST(AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register +#define AT91C_AIC_IECR (AT91_CAST(AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register +#define AT91C_AIC_ISCR (AT91_CAST(AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register +#define AT91C_AIC_FFDR (AT91_CAST(AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register +#define AT91C_AIC_CISR (AT91_CAST(AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register +#define AT91C_AIC_IDCR (AT91_CAST(AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register +#define AT91C_AIC_SPU (AT91_CAST(AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register +// ========== Register definition for PDC_DBGU peripheral ========== +#define AT91C_DBGU_TCR (AT91_CAST(AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register +#define AT91C_DBGU_RNPR (AT91_CAST(AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register +#define AT91C_DBGU_TNPR (AT91_CAST(AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register +#define AT91C_DBGU_TPR (AT91_CAST(AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register +#define AT91C_DBGU_RPR (AT91_CAST(AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register +#define AT91C_DBGU_RCR (AT91_CAST(AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register +#define AT91C_DBGU_RNCR (AT91_CAST(AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register +#define AT91C_DBGU_PTCR (AT91_CAST(AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register +#define AT91C_DBGU_PTSR (AT91_CAST(AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register +#define AT91C_DBGU_TNCR (AT91_CAST(AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register +// ========== Register definition for DBGU peripheral ========== +#define AT91C_DBGU_EXID (AT91_CAST(AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID Extension Register +#define AT91C_DBGU_BRGR (AT91_CAST(AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register +#define AT91C_DBGU_IDR (AT91_CAST(AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register +#define AT91C_DBGU_CSR (AT91_CAST(AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register +#define AT91C_DBGU_CIDR (AT91_CAST(AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID Register +#define AT91C_DBGU_MR (AT91_CAST(AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register +#define AT91C_DBGU_IMR (AT91_CAST(AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register +#define AT91C_DBGU_CR (AT91_CAST(AT91_REG *) 0xFFFFF200) // (DBGU) Control Register +#define AT91C_DBGU_FNTR (AT91_CAST(AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register +#define AT91C_DBGU_THR (AT91_CAST(AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register +#define AT91C_DBGU_RHR (AT91_CAST(AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register +#define AT91C_DBGU_IER (AT91_CAST(AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register +// ========== Register definition for PIOA peripheral ========== +#define AT91C_PIOA_ODR (AT91_CAST(AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr +#define AT91C_PIOA_SODR (AT91_CAST(AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register +#define AT91C_PIOA_ISR (AT91_CAST(AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register +#define AT91C_PIOA_ABSR (AT91_CAST(AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register +#define AT91C_PIOA_IER (AT91_CAST(AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register +#define AT91C_PIOA_PPUDR (AT91_CAST(AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register +#define AT91C_PIOA_IMR (AT91_CAST(AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register +#define AT91C_PIOA_PER (AT91_CAST(AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register +#define AT91C_PIOA_IFDR (AT91_CAST(AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register +#define AT91C_PIOA_OWDR (AT91_CAST(AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register +#define AT91C_PIOA_MDSR (AT91_CAST(AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register +#define AT91C_PIOA_IDR (AT91_CAST(AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register +#define AT91C_PIOA_ODSR (AT91_CAST(AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register +#define AT91C_PIOA_PPUSR (AT91_CAST(AT91_REG *) 0xFFFFF468) // (PIOA) Pull-up Status Register +#define AT91C_PIOA_OWSR (AT91_CAST(AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register +#define AT91C_PIOA_BSR (AT91_CAST(AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register +#define AT91C_PIOA_OWER (AT91_CAST(AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register +#define AT91C_PIOA_IFER (AT91_CAST(AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register +#define AT91C_PIOA_PDSR (AT91_CAST(AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register +#define AT91C_PIOA_PPUER (AT91_CAST(AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register +#define AT91C_PIOA_OSR (AT91_CAST(AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register +#define AT91C_PIOA_ASR (AT91_CAST(AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register +#define AT91C_PIOA_MDDR (AT91_CAST(AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register +#define AT91C_PIOA_CODR (AT91_CAST(AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register +#define AT91C_PIOA_MDER (AT91_CAST(AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register +#define AT91C_PIOA_PDR (AT91_CAST(AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register +#define AT91C_PIOA_IFSR (AT91_CAST(AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register +#define AT91C_PIOA_OER (AT91_CAST(AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register +#define AT91C_PIOA_PSR (AT91_CAST(AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register +// ========== Register definition for CKGR peripheral ========== +#define AT91C_CKGR_MOR (AT91_CAST(AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register +#define AT91C_CKGR_PLLR (AT91_CAST(AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL Register +#define AT91C_CKGR_MCFR (AT91_CAST(AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register +// ========== Register definition for PMC peripheral ========== +#define AT91C_PMC_IDR (AT91_CAST(AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register +#define AT91C_PMC_MOR (AT91_CAST(AT91_REG *) 0xFFFFFC20) // (PMC) Main Oscillator Register +#define AT91C_PMC_PLLR (AT91_CAST(AT91_REG *) 0xFFFFFC2C) // (PMC) PLL Register +#define AT91C_PMC_PCER (AT91_CAST(AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register +#define AT91C_PMC_PCKR (AT91_CAST(AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register +#define AT91C_PMC_MCKR (AT91_CAST(AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register +#define AT91C_PMC_SCDR (AT91_CAST(AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register +#define AT91C_PMC_PCDR (AT91_CAST(AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register +#define AT91C_PMC_SCSR (AT91_CAST(AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register +#define AT91C_PMC_PCSR (AT91_CAST(AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register +#define AT91C_PMC_MCFR (AT91_CAST(AT91_REG *) 0xFFFFFC24) // (PMC) Main Clock Frequency Register +#define AT91C_PMC_SCER (AT91_CAST(AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register +#define AT91C_PMC_IMR (AT91_CAST(AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register +#define AT91C_PMC_IER (AT91_CAST(AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register +#define AT91C_PMC_SR (AT91_CAST(AT91_REG *) 0xFFFFFC68) // (PMC) Status Register +// ========== Register definition for RSTC peripheral ========== +#define AT91C_RSTC_RCR (AT91_CAST(AT91_REG *) 0xFFFFFD00) // (RSTC) Reset Control Register +#define AT91C_RSTC_RMR (AT91_CAST(AT91_REG *) 0xFFFFFD08) // (RSTC) Reset Mode Register +#define AT91C_RSTC_RSR (AT91_CAST(AT91_REG *) 0xFFFFFD04) // (RSTC) Reset Status Register +// ========== Register definition for RTTC peripheral ========== +#define AT91C_RTTC_RTSR (AT91_CAST(AT91_REG *) 0xFFFFFD2C) // (RTTC) Real-time Status Register +#define AT91C_RTTC_RTMR (AT91_CAST(AT91_REG *) 0xFFFFFD20) // (RTTC) Real-time Mode Register +#define AT91C_RTTC_RTVR (AT91_CAST(AT91_REG *) 0xFFFFFD28) // (RTTC) Real-time Value Register +#define AT91C_RTTC_RTAR (AT91_CAST(AT91_REG *) 0xFFFFFD24) // (RTTC) Real-time Alarm Register +// ========== Register definition for PITC peripheral ========== +#define AT91C_PITC_PIVR (AT91_CAST(AT91_REG *) 0xFFFFFD38) // (PITC) Period Interval Value Register +#define AT91C_PITC_PISR (AT91_CAST(AT91_REG *) 0xFFFFFD34) // (PITC) Period Interval Status Register +#define AT91C_PITC_PIIR (AT91_CAST(AT91_REG *) 0xFFFFFD3C) // (PITC) Period Interval Image Register +#define AT91C_PITC_PIMR (AT91_CAST(AT91_REG *) 0xFFFFFD30) // (PITC) Period Interval Mode Register +// ========== Register definition for WDTC peripheral ========== +#define AT91C_WDTC_WDCR (AT91_CAST(AT91_REG *) 0xFFFFFD40) // (WDTC) Watchdog Control Register +#define AT91C_WDTC_WDSR (AT91_CAST(AT91_REG *) 0xFFFFFD48) // (WDTC) Watchdog Status Register +#define AT91C_WDTC_WDMR (AT91_CAST(AT91_REG *) 0xFFFFFD44) // (WDTC) Watchdog Mode Register +// ========== Register definition for VREG peripheral ========== +#define AT91C_VREG_MR (AT91_CAST(AT91_REG *) 0xFFFFFD60) // (VREG) Voltage Regulator Mode Register +// ========== Register definition for EFC0 peripheral ========== +#define AT91C_EFC0_FCR (AT91_CAST(AT91_REG *) 0xFFFFFF64) // (EFC0) MC Flash Command Register +#define AT91C_EFC0_FSR (AT91_CAST(AT91_REG *) 0xFFFFFF68) // (EFC0) MC Flash Status Register +#define AT91C_EFC0_VR (AT91_CAST(AT91_REG *) 0xFFFFFF6C) // (EFC0) MC Flash Version Register +#define AT91C_EFC0_FMR (AT91_CAST(AT91_REG *) 0xFFFFFF60) // (EFC0) MC Flash Mode Register +// ========== Register definition for EFC1 peripheral ========== +#define AT91C_EFC1_VR (AT91_CAST(AT91_REG *) 0xFFFFFF7C) // (EFC1) MC Flash Version Register +#define AT91C_EFC1_FCR (AT91_CAST(AT91_REG *) 0xFFFFFF74) // (EFC1) MC Flash Command Register +#define AT91C_EFC1_FSR (AT91_CAST(AT91_REG *) 0xFFFFFF78) // (EFC1) MC Flash Status Register +#define AT91C_EFC1_FMR (AT91_CAST(AT91_REG *) 0xFFFFFF70) // (EFC1) MC Flash Mode Register +// ========== Register definition for MC peripheral ========== +#define AT91C_MC_ASR (AT91_CAST(AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register +#define AT91C_MC_RCR (AT91_CAST(AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register +#define AT91C_MC_PUP (AT91_CAST(AT91_REG *) 0xFFFFFF50) // (MC) MC Protection Unit Peripherals +#define AT91C_MC_PUIA (AT91_CAST(AT91_REG *) 0xFFFFFF10) // (MC) MC Protection Unit Area +#define AT91C_MC_AASR (AT91_CAST(AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register +#define AT91C_MC_PUER (AT91_CAST(AT91_REG *) 0xFFFFFF54) // (MC) MC Protection Unit Enable Register +// ========== Register definition for PDC_SPI peripheral ========== +#define AT91C_SPI_PTCR (AT91_CAST(AT91_REG *) 0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register +#define AT91C_SPI_TPR (AT91_CAST(AT91_REG *) 0xFFFE0108) // (PDC_SPI) Transmit Pointer Register +#define AT91C_SPI_TCR (AT91_CAST(AT91_REG *) 0xFFFE010C) // (PDC_SPI) Transmit Counter Register +#define AT91C_SPI_RCR (AT91_CAST(AT91_REG *) 0xFFFE0104) // (PDC_SPI) Receive Counter Register +#define AT91C_SPI_PTSR (AT91_CAST(AT91_REG *) 0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register +#define AT91C_SPI_RNPR (AT91_CAST(AT91_REG *) 0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register +#define AT91C_SPI_RPR (AT91_CAST(AT91_REG *) 0xFFFE0100) // (PDC_SPI) Receive Pointer Register +#define AT91C_SPI_TNCR (AT91_CAST(AT91_REG *) 0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register +#define AT91C_SPI_RNCR (AT91_CAST(AT91_REG *) 0xFFFE0114) // (PDC_SPI) Receive Next Counter Register +#define AT91C_SPI_TNPR (AT91_CAST(AT91_REG *) 0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register +// ========== Register definition for SPI peripheral ========== +#define AT91C_SPI_IER (AT91_CAST(AT91_REG *) 0xFFFE0014) // (SPI) Interrupt Enable Register +#define AT91C_SPI_SR (AT91_CAST(AT91_REG *) 0xFFFE0010) // (SPI) Status Register +#define AT91C_SPI_IDR (AT91_CAST(AT91_REG *) 0xFFFE0018) // (SPI) Interrupt Disable Register +#define AT91C_SPI_CR (AT91_CAST(AT91_REG *) 0xFFFE0000) // (SPI) Control Register +#define AT91C_SPI_MR (AT91_CAST(AT91_REG *) 0xFFFE0004) // (SPI) Mode Register +#define AT91C_SPI_IMR (AT91_CAST(AT91_REG *) 0xFFFE001C) // (SPI) Interrupt Mask Register +#define AT91C_SPI_TDR (AT91_CAST(AT91_REG *) 0xFFFE000C) // (SPI) Transmit Data Register +#define AT91C_SPI_RDR (AT91_CAST(AT91_REG *) 0xFFFE0008) // (SPI) Receive Data Register +#define AT91C_SPI_CSR (AT91_CAST(AT91_REG *) 0xFFFE0030) // (SPI) Chip Select Register +// ========== Register definition for PDC_ADC peripheral ========== +#define AT91C_ADC_PTSR (AT91_CAST(AT91_REG *) 0xFFFD8124) // (PDC_ADC) PDC Transfer Status Register +#define AT91C_ADC_PTCR (AT91_CAST(AT91_REG *) 0xFFFD8120) // (PDC_ADC) PDC Transfer Control Register +#define AT91C_ADC_TNPR (AT91_CAST(AT91_REG *) 0xFFFD8118) // (PDC_ADC) Transmit Next Pointer Register +#define AT91C_ADC_TNCR (AT91_CAST(AT91_REG *) 0xFFFD811C) // (PDC_ADC) Transmit Next Counter Register +#define AT91C_ADC_RNPR (AT91_CAST(AT91_REG *) 0xFFFD8110) // (PDC_ADC) Receive Next Pointer Register +#define AT91C_ADC_RNCR (AT91_CAST(AT91_REG *) 0xFFFD8114) // (PDC_ADC) Receive Next Counter Register +#define AT91C_ADC_RPR (AT91_CAST(AT91_REG *) 0xFFFD8100) // (PDC_ADC) Receive Pointer Register +#define AT91C_ADC_TCR (AT91_CAST(AT91_REG *) 0xFFFD810C) // (PDC_ADC) Transmit Counter Register +#define AT91C_ADC_TPR (AT91_CAST(AT91_REG *) 0xFFFD8108) // (PDC_ADC) Transmit Pointer Register +#define AT91C_ADC_RCR (AT91_CAST(AT91_REG *) 0xFFFD8104) // (PDC_ADC) Receive Counter Register +// ========== Register definition for ADC peripheral ========== +#define AT91C_ADC_CDR2 (AT91_CAST(AT91_REG *) 0xFFFD8038) // (ADC) ADC Channel Data Register 2 +#define AT91C_ADC_CDR3 (AT91_CAST(AT91_REG *) 0xFFFD803C) // (ADC) ADC Channel Data Register 3 +#define AT91C_ADC_CDR0 (AT91_CAST(AT91_REG *) 0xFFFD8030) // (ADC) ADC Channel Data Register 0 +#define AT91C_ADC_CDR5 (AT91_CAST(AT91_REG *) 0xFFFD8044) // (ADC) ADC Channel Data Register 5 +#define AT91C_ADC_CHDR (AT91_CAST(AT91_REG *) 0xFFFD8014) // (ADC) ADC Channel Disable Register +#define AT91C_ADC_SR (AT91_CAST(AT91_REG *) 0xFFFD801C) // (ADC) ADC Status Register +#define AT91C_ADC_CDR4 (AT91_CAST(AT91_REG *) 0xFFFD8040) // (ADC) ADC Channel Data Register 4 +#define AT91C_ADC_CDR1 (AT91_CAST(AT91_REG *) 0xFFFD8034) // (ADC) ADC Channel Data Register 1 +#define AT91C_ADC_LCDR (AT91_CAST(AT91_REG *) 0xFFFD8020) // (ADC) ADC Last Converted Data Register +#define AT91C_ADC_IDR (AT91_CAST(AT91_REG *) 0xFFFD8028) // (ADC) ADC Interrupt Disable Register +#define AT91C_ADC_CR (AT91_CAST(AT91_REG *) 0xFFFD8000) // (ADC) ADC Control Register +#define AT91C_ADC_CDR7 (AT91_CAST(AT91_REG *) 0xFFFD804C) // (ADC) ADC Channel Data Register 7 +#define AT91C_ADC_CDR6 (AT91_CAST(AT91_REG *) 0xFFFD8048) // (ADC) ADC Channel Data Register 6 +#define AT91C_ADC_IER (AT91_CAST(AT91_REG *) 0xFFFD8024) // (ADC) ADC Interrupt Enable Register +#define AT91C_ADC_CHER (AT91_CAST(AT91_REG *) 0xFFFD8010) // (ADC) ADC Channel Enable Register +#define AT91C_ADC_CHSR (AT91_CAST(AT91_REG *) 0xFFFD8018) // (ADC) ADC Channel Status Register +#define AT91C_ADC_MR (AT91_CAST(AT91_REG *) 0xFFFD8004) // (ADC) ADC Mode Register +#define AT91C_ADC_IMR (AT91_CAST(AT91_REG *) 0xFFFD802C) // (ADC) ADC Interrupt Mask Register +// ========== Register definition for PDC_SSC peripheral ========== +#define AT91C_SSC_TNCR (AT91_CAST(AT91_REG *) 0xFFFD411C) // (PDC_SSC) Transmit Next Counter Register +#define AT91C_SSC_RPR (AT91_CAST(AT91_REG *) 0xFFFD4100) // (PDC_SSC) Receive Pointer Register +#define AT91C_SSC_RNCR (AT91_CAST(AT91_REG *) 0xFFFD4114) // (PDC_SSC) Receive Next Counter Register +#define AT91C_SSC_TPR (AT91_CAST(AT91_REG *) 0xFFFD4108) // (PDC_SSC) Transmit Pointer Register +#define AT91C_SSC_PTCR (AT91_CAST(AT91_REG *) 0xFFFD4120) // (PDC_SSC) PDC Transfer Control Register +#define AT91C_SSC_TCR (AT91_CAST(AT91_REG *) 0xFFFD410C) // (PDC_SSC) Transmit Counter Register +#define AT91C_SSC_RCR (AT91_CAST(AT91_REG *) 0xFFFD4104) // (PDC_SSC) Receive Counter Register +#define AT91C_SSC_RNPR (AT91_CAST(AT91_REG *) 0xFFFD4110) // (PDC_SSC) Receive Next Pointer Register +#define AT91C_SSC_TNPR (AT91_CAST(AT91_REG *) 0xFFFD4118) // (PDC_SSC) Transmit Next Pointer Register +#define AT91C_SSC_PTSR (AT91_CAST(AT91_REG *) 0xFFFD4124) // (PDC_SSC) PDC Transfer Status Register +// ========== Register definition for SSC peripheral ========== +#define AT91C_SSC_RHR (AT91_CAST(AT91_REG *) 0xFFFD4020) // (SSC) Receive Holding Register +#define AT91C_SSC_RSHR (AT91_CAST(AT91_REG *) 0xFFFD4030) // (SSC) Receive Sync Holding Register +#define AT91C_SSC_TFMR (AT91_CAST(AT91_REG *) 0xFFFD401C) // (SSC) Transmit Frame Mode Register +#define AT91C_SSC_IDR (AT91_CAST(AT91_REG *) 0xFFFD4048) // (SSC) Interrupt Disable Register +#define AT91C_SSC_THR (AT91_CAST(AT91_REG *) 0xFFFD4024) // (SSC) Transmit Holding Register +#define AT91C_SSC_RCMR (AT91_CAST(AT91_REG *) 0xFFFD4010) // (SSC) Receive Clock ModeRegister +#define AT91C_SSC_IER (AT91_CAST(AT91_REG *) 0xFFFD4044) // (SSC) Interrupt Enable Register +#define AT91C_SSC_TSHR (AT91_CAST(AT91_REG *) 0xFFFD4034) // (SSC) Transmit Sync Holding Register +#define AT91C_SSC_SR (AT91_CAST(AT91_REG *) 0xFFFD4040) // (SSC) Status Register +#define AT91C_SSC_CMR (AT91_CAST(AT91_REG *) 0xFFFD4004) // (SSC) Clock Mode Register +#define AT91C_SSC_TCMR (AT91_CAST(AT91_REG *) 0xFFFD4018) // (SSC) Transmit Clock Mode Register +#define AT91C_SSC_CR (AT91_CAST(AT91_REG *) 0xFFFD4000) // (SSC) Control Register +#define AT91C_SSC_IMR (AT91_CAST(AT91_REG *) 0xFFFD404C) // (SSC) Interrupt Mask Register +#define AT91C_SSC_RFMR (AT91_CAST(AT91_REG *) 0xFFFD4014) // (SSC) Receive Frame Mode Register +// ========== Register definition for PDC_US1 peripheral ========== +#define AT91C_US1_RNCR (AT91_CAST(AT91_REG *) 0xFFFC4114) // (PDC_US1) Receive Next Counter Register +#define AT91C_US1_PTCR (AT91_CAST(AT91_REG *) 0xFFFC4120) // (PDC_US1) PDC Transfer Control Register +#define AT91C_US1_TCR (AT91_CAST(AT91_REG *) 0xFFFC410C) // (PDC_US1) Transmit Counter Register +#define AT91C_US1_PTSR (AT91_CAST(AT91_REG *) 0xFFFC4124) // (PDC_US1) PDC Transfer Status Register +#define AT91C_US1_TNPR (AT91_CAST(AT91_REG *) 0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register +#define AT91C_US1_RCR (AT91_CAST(AT91_REG *) 0xFFFC4104) // (PDC_US1) Receive Counter Register +#define AT91C_US1_RNPR (AT91_CAST(AT91_REG *) 0xFFFC4110) // (PDC_US1) Receive Next Pointer Register +#define AT91C_US1_RPR (AT91_CAST(AT91_REG *) 0xFFFC4100) // (PDC_US1) Receive Pointer Register +#define AT91C_US1_TNCR (AT91_CAST(AT91_REG *) 0xFFFC411C) // (PDC_US1) Transmit Next Counter Register +#define AT91C_US1_TPR (AT91_CAST(AT91_REG *) 0xFFFC4108) // (PDC_US1) Transmit Pointer Register +// ========== Register definition for US1 peripheral ========== +#define AT91C_US1_IF (AT91_CAST(AT91_REG *) 0xFFFC404C) // (US1) IRDA_FILTER Register +#define AT91C_US1_NER (AT91_CAST(AT91_REG *) 0xFFFC4044) // (US1) Nb Errors Register +#define AT91C_US1_RTOR (AT91_CAST(AT91_REG *) 0xFFFC4024) // (US1) Receiver Time-out Register +#define AT91C_US1_CSR (AT91_CAST(AT91_REG *) 0xFFFC4014) // (US1) Channel Status Register +#define AT91C_US1_IDR (AT91_CAST(AT91_REG *) 0xFFFC400C) // (US1) Interrupt Disable Register +#define AT91C_US1_IER (AT91_CAST(AT91_REG *) 0xFFFC4008) // (US1) Interrupt Enable Register +#define AT91C_US1_THR (AT91_CAST(AT91_REG *) 0xFFFC401C) // (US1) Transmitter Holding Register +#define AT91C_US1_TTGR (AT91_CAST(AT91_REG *) 0xFFFC4028) // (US1) Transmitter Time-guard Register +#define AT91C_US1_RHR (AT91_CAST(AT91_REG *) 0xFFFC4018) // (US1) Receiver Holding Register +#define AT91C_US1_BRGR (AT91_CAST(AT91_REG *) 0xFFFC4020) // (US1) Baud Rate Generator Register +#define AT91C_US1_IMR (AT91_CAST(AT91_REG *) 0xFFFC4010) // (US1) Interrupt Mask Register +#define AT91C_US1_FIDI (AT91_CAST(AT91_REG *) 0xFFFC4040) // (US1) FI_DI_Ratio Register +#define AT91C_US1_CR (AT91_CAST(AT91_REG *) 0xFFFC4000) // (US1) Control Register +#define AT91C_US1_MR (AT91_CAST(AT91_REG *) 0xFFFC4004) // (US1) Mode Register +// ========== Register definition for PDC_US0 peripheral ========== +#define AT91C_US0_TNPR (AT91_CAST(AT91_REG *) 0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register +#define AT91C_US0_RNPR (AT91_CAST(AT91_REG *) 0xFFFC0110) // (PDC_US0) Receive Next Pointer Register +#define AT91C_US0_TCR (AT91_CAST(AT91_REG *) 0xFFFC010C) // (PDC_US0) Transmit Counter Register +#define AT91C_US0_PTCR (AT91_CAST(AT91_REG *) 0xFFFC0120) // (PDC_US0) PDC Transfer Control Register +#define AT91C_US0_PTSR (AT91_CAST(AT91_REG *) 0xFFFC0124) // (PDC_US0) PDC Transfer Status Register +#define AT91C_US0_TNCR (AT91_CAST(AT91_REG *) 0xFFFC011C) // (PDC_US0) Transmit Next Counter Register +#define AT91C_US0_TPR (AT91_CAST(AT91_REG *) 0xFFFC0108) // (PDC_US0) Transmit Pointer Register +#define AT91C_US0_RCR (AT91_CAST(AT91_REG *) 0xFFFC0104) // (PDC_US0) Receive Counter Register +#define AT91C_US0_RPR (AT91_CAST(AT91_REG *) 0xFFFC0100) // (PDC_US0) Receive Pointer Register +#define AT91C_US0_RNCR (AT91_CAST(AT91_REG *) 0xFFFC0114) // (PDC_US0) Receive Next Counter Register +// ========== Register definition for US0 peripheral ========== +#define AT91C_US0_BRGR (AT91_CAST(AT91_REG *) 0xFFFC0020) // (US0) Baud Rate Generator Register +#define AT91C_US0_NER (AT91_CAST(AT91_REG *) 0xFFFC0044) // (US0) Nb Errors Register +#define AT91C_US0_CR (AT91_CAST(AT91_REG *) 0xFFFC0000) // (US0) Control Register +#define AT91C_US0_IMR (AT91_CAST(AT91_REG *) 0xFFFC0010) // (US0) Interrupt Mask Register +#define AT91C_US0_FIDI (AT91_CAST(AT91_REG *) 0xFFFC0040) // (US0) FI_DI_Ratio Register +#define AT91C_US0_TTGR (AT91_CAST(AT91_REG *) 0xFFFC0028) // (US0) Transmitter Time-guard Register +#define AT91C_US0_MR (AT91_CAST(AT91_REG *) 0xFFFC0004) // (US0) Mode Register +#define AT91C_US0_RTOR (AT91_CAST(AT91_REG *) 0xFFFC0024) // (US0) Receiver Time-out Register +#define AT91C_US0_CSR (AT91_CAST(AT91_REG *) 0xFFFC0014) // (US0) Channel Status Register +#define AT91C_US0_RHR (AT91_CAST(AT91_REG *) 0xFFFC0018) // (US0) Receiver Holding Register +#define AT91C_US0_IDR (AT91_CAST(AT91_REG *) 0xFFFC000C) // (US0) Interrupt Disable Register +#define AT91C_US0_THR (AT91_CAST(AT91_REG *) 0xFFFC001C) // (US0) Transmitter Holding Register +#define AT91C_US0_IF (AT91_CAST(AT91_REG *) 0xFFFC004C) // (US0) IRDA_FILTER Register +#define AT91C_US0_IER (AT91_CAST(AT91_REG *) 0xFFFC0008) // (US0) Interrupt Enable Register +// ========== Register definition for TWI peripheral ========== +#define AT91C_TWI_IER (AT91_CAST(AT91_REG *) 0xFFFB8024) // (TWI) Interrupt Enable Register +#define AT91C_TWI_CR (AT91_CAST(AT91_REG *) 0xFFFB8000) // (TWI) Control Register +#define AT91C_TWI_SR (AT91_CAST(AT91_REG *) 0xFFFB8020) // (TWI) Status Register +#define AT91C_TWI_IMR (AT91_CAST(AT91_REG *) 0xFFFB802C) // (TWI) Interrupt Mask Register +#define AT91C_TWI_THR (AT91_CAST(AT91_REG *) 0xFFFB8034) // (TWI) Transmit Holding Register +#define AT91C_TWI_IDR (AT91_CAST(AT91_REG *) 0xFFFB8028) // (TWI) Interrupt Disable Register +#define AT91C_TWI_IADR (AT91_CAST(AT91_REG *) 0xFFFB800C) // (TWI) Internal Address Register +#define AT91C_TWI_MMR (AT91_CAST(AT91_REG *) 0xFFFB8004) // (TWI) Master Mode Register +#define AT91C_TWI_CWGR (AT91_CAST(AT91_REG *) 0xFFFB8010) // (TWI) Clock Waveform Generator Register +#define AT91C_TWI_RHR (AT91_CAST(AT91_REG *) 0xFFFB8030) // (TWI) Receive Holding Register +// ========== Register definition for TC0 peripheral ========== +#define AT91C_TC0_SR (AT91_CAST(AT91_REG *) 0xFFFA0020) // (TC0) Status Register +#define AT91C_TC0_RC (AT91_CAST(AT91_REG *) 0xFFFA001C) // (TC0) Register C +#define AT91C_TC0_RB (AT91_CAST(AT91_REG *) 0xFFFA0018) // (TC0) Register B +#define AT91C_TC0_CCR (AT91_CAST(AT91_REG *) 0xFFFA0000) // (TC0) Channel Control Register +#define AT91C_TC0_CMR (AT91_CAST(AT91_REG *) 0xFFFA0004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode) +#define AT91C_TC0_IER (AT91_CAST(AT91_REG *) 0xFFFA0024) // (TC0) Interrupt Enable Register +#define AT91C_TC0_RA (AT91_CAST(AT91_REG *) 0xFFFA0014) // (TC0) Register A +#define AT91C_TC0_IDR (AT91_CAST(AT91_REG *) 0xFFFA0028) // (TC0) Interrupt Disable Register +#define AT91C_TC0_CV (AT91_CAST(AT91_REG *) 0xFFFA0010) // (TC0) Counter Value +#define AT91C_TC0_IMR (AT91_CAST(AT91_REG *) 0xFFFA002C) // (TC0) Interrupt Mask Register +// ========== Register definition for TC1 peripheral ========== +#define AT91C_TC1_RB (AT91_CAST(AT91_REG *) 0xFFFA0058) // (TC1) Register B +#define AT91C_TC1_CCR (AT91_CAST(AT91_REG *) 0xFFFA0040) // (TC1) Channel Control Register +#define AT91C_TC1_IER (AT91_CAST(AT91_REG *) 0xFFFA0064) // (TC1) Interrupt Enable Register +#define AT91C_TC1_IDR (AT91_CAST(AT91_REG *) 0xFFFA0068) // (TC1) Interrupt Disable Register +#define AT91C_TC1_SR (AT91_CAST(AT91_REG *) 0xFFFA0060) // (TC1) Status Register +#define AT91C_TC1_CMR (AT91_CAST(AT91_REG *) 0xFFFA0044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode) +#define AT91C_TC1_RA (AT91_CAST(AT91_REG *) 0xFFFA0054) // (TC1) Register A +#define AT91C_TC1_RC (AT91_CAST(AT91_REG *) 0xFFFA005C) // (TC1) Register C +#define AT91C_TC1_IMR (AT91_CAST(AT91_REG *) 0xFFFA006C) // (TC1) Interrupt Mask Register +#define AT91C_TC1_CV (AT91_CAST(AT91_REG *) 0xFFFA0050) // (TC1) Counter Value +// ========== Register definition for TC2 peripheral ========== +#define AT91C_TC2_CMR (AT91_CAST(AT91_REG *) 0xFFFA0084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode) +#define AT91C_TC2_CCR (AT91_CAST(AT91_REG *) 0xFFFA0080) // (TC2) Channel Control Register +#define AT91C_TC2_CV (AT91_CAST(AT91_REG *) 0xFFFA0090) // (TC2) Counter Value +#define AT91C_TC2_RA (AT91_CAST(AT91_REG *) 0xFFFA0094) // (TC2) Register A +#define AT91C_TC2_RB (AT91_CAST(AT91_REG *) 0xFFFA0098) // (TC2) Register B +#define AT91C_TC2_IDR (AT91_CAST(AT91_REG *) 0xFFFA00A8) // (TC2) Interrupt Disable Register +#define AT91C_TC2_IMR (AT91_CAST(AT91_REG *) 0xFFFA00AC) // (TC2) Interrupt Mask Register +#define AT91C_TC2_RC (AT91_CAST(AT91_REG *) 0xFFFA009C) // (TC2) Register C +#define AT91C_TC2_IER (AT91_CAST(AT91_REG *) 0xFFFA00A4) // (TC2) Interrupt Enable Register +#define AT91C_TC2_SR (AT91_CAST(AT91_REG *) 0xFFFA00A0) // (TC2) Status Register +// ========== Register definition for TCB peripheral ========== +#define AT91C_TCB_BMR (AT91_CAST(AT91_REG *) 0xFFFA00C4) // (TCB) TC Block Mode Register +#define AT91C_TCB_BCR (AT91_CAST(AT91_REG *) 0xFFFA00C0) // (TCB) TC Block Control Register +// ========== Register definition for PWMC_CH3 peripheral ========== +#define AT91C_PWMC_CH3_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC270) // (PWMC_CH3) Channel Update Register +#define AT91C_PWMC_CH3_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC274) // (PWMC_CH3) Reserved +#define AT91C_PWMC_CH3_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC268) // (PWMC_CH3) Channel Period Register +#define AT91C_PWMC_CH3_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC264) // (PWMC_CH3) Channel Duty Cycle Register +#define AT91C_PWMC_CH3_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC26C) // (PWMC_CH3) Channel Counter Register +#define AT91C_PWMC_CH3_CMR (AT91_CAST(AT91_REG *) 0xFFFCC260) // (PWMC_CH3) Channel Mode Register +// ========== Register definition for PWMC_CH2 peripheral ========== +#define AT91C_PWMC_CH2_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC254) // (PWMC_CH2) Reserved +#define AT91C_PWMC_CH2_CMR (AT91_CAST(AT91_REG *) 0xFFFCC240) // (PWMC_CH2) Channel Mode Register +#define AT91C_PWMC_CH2_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC24C) // (PWMC_CH2) Channel Counter Register +#define AT91C_PWMC_CH2_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC248) // (PWMC_CH2) Channel Period Register +#define AT91C_PWMC_CH2_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC250) // (PWMC_CH2) Channel Update Register +#define AT91C_PWMC_CH2_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC244) // (PWMC_CH2) Channel Duty Cycle Register +// ========== Register definition for PWMC_CH1 peripheral ========== +#define AT91C_PWMC_CH1_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC234) // (PWMC_CH1) Reserved +#define AT91C_PWMC_CH1_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC230) // (PWMC_CH1) Channel Update Register +#define AT91C_PWMC_CH1_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC228) // (PWMC_CH1) Channel Period Register +#define AT91C_PWMC_CH1_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC22C) // (PWMC_CH1) Channel Counter Register +#define AT91C_PWMC_CH1_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC224) // (PWMC_CH1) Channel Duty Cycle Register +#define AT91C_PWMC_CH1_CMR (AT91_CAST(AT91_REG *) 0xFFFCC220) // (PWMC_CH1) Channel Mode Register +// ========== Register definition for PWMC_CH0 peripheral ========== +#define AT91C_PWMC_CH0_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC214) // (PWMC_CH0) Reserved +#define AT91C_PWMC_CH0_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC208) // (PWMC_CH0) Channel Period Register +#define AT91C_PWMC_CH0_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC204) // (PWMC_CH0) Channel Duty Cycle Register +#define AT91C_PWMC_CH0_CMR (AT91_CAST(AT91_REG *) 0xFFFCC200) // (PWMC_CH0) Channel Mode Register +#define AT91C_PWMC_CH0_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC210) // (PWMC_CH0) Channel Update Register +#define AT91C_PWMC_CH0_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC20C) // (PWMC_CH0) Channel Counter Register +// ========== Register definition for PWMC peripheral ========== +#define AT91C_PWMC_IDR (AT91_CAST(AT91_REG *) 0xFFFCC014) // (PWMC) PWMC Interrupt Disable Register +#define AT91C_PWMC_DIS (AT91_CAST(AT91_REG *) 0xFFFCC008) // (PWMC) PWMC Disable Register +#define AT91C_PWMC_IER (AT91_CAST(AT91_REG *) 0xFFFCC010) // (PWMC) PWMC Interrupt Enable Register +#define AT91C_PWMC_VR (AT91_CAST(AT91_REG *) 0xFFFCC0FC) // (PWMC) PWMC Version Register +#define AT91C_PWMC_ISR (AT91_CAST(AT91_REG *) 0xFFFCC01C) // (PWMC) PWMC Interrupt Status Register +#define AT91C_PWMC_SR (AT91_CAST(AT91_REG *) 0xFFFCC00C) // (PWMC) PWMC Status Register +#define AT91C_PWMC_IMR (AT91_CAST(AT91_REG *) 0xFFFCC018) // (PWMC) PWMC Interrupt Mask Register +#define AT91C_PWMC_MR (AT91_CAST(AT91_REG *) 0xFFFCC000) // (PWMC) PWMC Mode Register +#define AT91C_PWMC_ENA (AT91_CAST(AT91_REG *) 0xFFFCC004) // (PWMC) PWMC Enable Register +// ========== Register definition for UDP peripheral ========== +#define AT91C_UDP_IMR (AT91_CAST(AT91_REG *) 0xFFFB0018) // (UDP) Interrupt Mask Register +#define AT91C_UDP_FADDR (AT91_CAST(AT91_REG *) 0xFFFB0008) // (UDP) Function Address Register +#define AT91C_UDP_NUM (AT91_CAST(AT91_REG *) 0xFFFB0000) // (UDP) Frame Number Register +#define AT91C_UDP_FDR (AT91_CAST(AT91_REG *) 0xFFFB0050) // (UDP) Endpoint FIFO Data Register +#define AT91C_UDP_ISR (AT91_CAST(AT91_REG *) 0xFFFB001C) // (UDP) Interrupt Status Register +#define AT91C_UDP_CSR (AT91_CAST(AT91_REG *) 0xFFFB0030) // (UDP) Endpoint Control and Status Register +#define AT91C_UDP_IDR (AT91_CAST(AT91_REG *) 0xFFFB0014) // (UDP) Interrupt Disable Register +#define AT91C_UDP_ICR (AT91_CAST(AT91_REG *) 0xFFFB0020) // (UDP) Interrupt Clear Register +#define AT91C_UDP_RSTEP (AT91_CAST(AT91_REG *) 0xFFFB0028) // (UDP) Reset Endpoint Register +#define AT91C_UDP_TXVC (AT91_CAST(AT91_REG *) 0xFFFB0074) // (UDP) Transceiver Control Register +#define AT91C_UDP_GLBSTATE (AT91_CAST(AT91_REG *) 0xFFFB0004) // (UDP) Global State Register +#define AT91C_UDP_IER (AT91_CAST(AT91_REG *) 0xFFFB0010) // (UDP) Interrupt Enable Register + +// ***************************************************************************** +// PIO DEFINITIONS FOR AT91SAM7S512 +// ***************************************************************************** +#define AT91C_PIO_PA0 (1 << 0) // Pin Controlled by PA0 +#define AT91C_PA0_PWM0 (AT91C_PIO_PA0) // PWM Channel 0 +#define AT91C_PA0_TIOA0 (AT91C_PIO_PA0) // Timer Counter 0 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA1 (1 << 1) // Pin Controlled by PA1 +#define AT91C_PA1_PWM1 (AT91C_PIO_PA1) // PWM Channel 1 +#define AT91C_PA1_TIOB0 (AT91C_PIO_PA1) // Timer Counter 0 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA2 (1 << 2) // Pin Controlled by PA2 +#define AT91C_PA2_PWM2 (AT91C_PIO_PA2) // PWM Channel 2 +#define AT91C_PA2_SCK0 (AT91C_PIO_PA2) // USART 0 Serial Clock +#define AT91C_PIO_PA3 (1 << 3) // Pin Controlled by PA3 +#define AT91C_PA3_TWD (AT91C_PIO_PA3) // TWI Two-wire Serial Data +#define AT91C_PA3_NPCS3 (AT91C_PIO_PA3) // SPI Peripheral Chip Select 3 +#define AT91C_PIO_PA4 (1 << 4) // Pin Controlled by PA4 +#define AT91C_PA4_TWCK (AT91C_PIO_PA4) // TWI Two-wire Serial Clock +#define AT91C_PA4_TCLK0 (AT91C_PIO_PA4) // Timer Counter 0 external clock input +#define AT91C_PIO_PA5 (1 << 5) // Pin Controlled by PA5 +#define AT91C_PA5_RXD0 (AT91C_PIO_PA5) // USART 0 Receive Data +#define AT91C_PA5_NPCS3 (AT91C_PIO_PA5) // SPI Peripheral Chip Select 3 +#define AT91C_PIO_PA6 (1 << 6) // Pin Controlled by PA6 +#define AT91C_PA6_TXD0 (AT91C_PIO_PA6) // USART 0 Transmit Data +#define AT91C_PA6_PCK0 (AT91C_PIO_PA6) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PA7 (1 << 7) // Pin Controlled by PA7 +#define AT91C_PA7_RTS0 (AT91C_PIO_PA7) // USART 0 Ready To Send +#define AT91C_PA7_PWM3 (AT91C_PIO_PA7) // PWM Channel 3 +#define AT91C_PIO_PA8 (1 << 8) // Pin Controlled by PA8 +#define AT91C_PA8_CTS0 (AT91C_PIO_PA8) // USART 0 Clear To Send +#define AT91C_PA8_ADTRG (AT91C_PIO_PA8) // ADC External Trigger +#define AT91C_PIO_PA9 (1 << 9) // Pin Controlled by PA9 +#define AT91C_PA9_DRXD (AT91C_PIO_PA9) // DBGU Debug Receive Data +#define AT91C_PA9_NPCS1 (AT91C_PIO_PA9) // SPI Peripheral Chip Select 1 +#define AT91C_PIO_PA10 (1 << 10) // Pin Controlled by PA10 +#define AT91C_PA10_DTXD (AT91C_PIO_PA10) // DBGU Debug Transmit Data +#define AT91C_PA10_NPCS2 (AT91C_PIO_PA10) // SPI Peripheral Chip Select 2 +#define AT91C_PIO_PA11 (1 << 11) // Pin Controlled by PA11 +#define AT91C_PA11_NPCS0 (AT91C_PIO_PA11) // SPI Peripheral Chip Select 0 +#define AT91C_PA11_PWM0 (AT91C_PIO_PA11) // PWM Channel 0 +#define AT91C_PIO_PA12 (1 << 12) // Pin Controlled by PA12 +#define AT91C_PA12_MISO (AT91C_PIO_PA12) // SPI Master In Slave +#define AT91C_PA12_PWM1 (AT91C_PIO_PA12) // PWM Channel 1 +#define AT91C_PIO_PA13 (1 << 13) // Pin Controlled by PA13 +#define AT91C_PA13_MOSI (AT91C_PIO_PA13) // SPI Master Out Slave +#define AT91C_PA13_PWM2 (AT91C_PIO_PA13) // PWM Channel 2 +#define AT91C_PIO_PA14 (1 << 14) // Pin Controlled by PA14 +#define AT91C_PA14_SPCK (AT91C_PIO_PA14) // SPI Serial Clock +#define AT91C_PA14_PWM3 (AT91C_PIO_PA14) // PWM Channel 3 +#define AT91C_PIO_PA15 (1 << 15) // Pin Controlled by PA15 +#define AT91C_PA15_TF (AT91C_PIO_PA15) // SSC Transmit Frame Sync +#define AT91C_PA15_TIOA1 (AT91C_PIO_PA15) // Timer Counter 1 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA16 (1 << 16) // Pin Controlled by PA16 +#define AT91C_PA16_TK (AT91C_PIO_PA16) // SSC Transmit Clock +#define AT91C_PA16_TIOB1 (AT91C_PIO_PA16) // Timer Counter 1 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA17 (1 << 17) // Pin Controlled by PA17 +#define AT91C_PA17_TD (AT91C_PIO_PA17) // SSC Transmit data +#define AT91C_PA17_PCK1 (AT91C_PIO_PA17) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA18 (1 << 18) // Pin Controlled by PA18 +#define AT91C_PA18_RD (AT91C_PIO_PA18) // SSC Receive Data +#define AT91C_PA18_PCK2 (AT91C_PIO_PA18) // PMC Programmable Clock Output 2 +#define AT91C_PIO_PA19 (1 << 19) // Pin Controlled by PA19 +#define AT91C_PA19_RK (AT91C_PIO_PA19) // SSC Receive Clock +#define AT91C_PA19_FIQ (AT91C_PIO_PA19) // AIC Fast Interrupt Input +#define AT91C_PIO_PA20 (1 << 20) // Pin Controlled by PA20 +#define AT91C_PA20_RF (AT91C_PIO_PA20) // SSC Receive Frame Sync +#define AT91C_PA20_IRQ0 (AT91C_PIO_PA20) // External Interrupt 0 +#define AT91C_PIO_PA21 (1 << 21) // Pin Controlled by PA21 +#define AT91C_PA21_RXD1 (AT91C_PIO_PA21) // USART 1 Receive Data +#define AT91C_PA21_PCK1 (AT91C_PIO_PA21) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA22 (1 << 22) // Pin Controlled by PA22 +#define AT91C_PA22_TXD1 (AT91C_PIO_PA22) // USART 1 Transmit Data +#define AT91C_PA22_NPCS3 (AT91C_PIO_PA22) // SPI Peripheral Chip Select 3 +#define AT91C_PIO_PA23 (1 << 23) // Pin Controlled by PA23 +#define AT91C_PA23_SCK1 (AT91C_PIO_PA23) // USART 1 Serial Clock +#define AT91C_PA23_PWM0 (AT91C_PIO_PA23) // PWM Channel 0 +#define AT91C_PIO_PA24 (1 << 24) // Pin Controlled by PA24 +#define AT91C_PA24_RTS1 (AT91C_PIO_PA24) // USART 1 Ready To Send +#define AT91C_PA24_PWM1 (AT91C_PIO_PA24) // PWM Channel 1 +#define AT91C_PIO_PA25 (1 << 25) // Pin Controlled by PA25 +#define AT91C_PA25_CTS1 (AT91C_PIO_PA25) // USART 1 Clear To Send +#define AT91C_PA25_PWM2 (AT91C_PIO_PA25) // PWM Channel 2 +#define AT91C_PIO_PA26 (1 << 26) // Pin Controlled by PA26 +#define AT91C_PA26_DCD1 (AT91C_PIO_PA26) // USART 1 Data Carrier Detect +#define AT91C_PA26_TIOA2 (AT91C_PIO_PA26) // Timer Counter 2 Multipurpose Timer I/O Pin A +#define AT91C_PIO_PA27 (1 << 27) // Pin Controlled by PA27 +#define AT91C_PA27_DTR1 (AT91C_PIO_PA27) // USART 1 Data Terminal ready +#define AT91C_PA27_TIOB2 (AT91C_PIO_PA27) // Timer Counter 2 Multipurpose Timer I/O Pin B +#define AT91C_PIO_PA28 (1 << 28) // Pin Controlled by PA28 +#define AT91C_PA28_DSR1 (AT91C_PIO_PA28) // USART 1 Data Set ready +#define AT91C_PA28_TCLK1 (AT91C_PIO_PA28) // Timer Counter 1 external clock input +#define AT91C_PIO_PA29 (1 << 29) // Pin Controlled by PA29 +#define AT91C_PA29_RI1 (AT91C_PIO_PA29) // USART 1 Ring Indicator +#define AT91C_PA29_TCLK2 (AT91C_PIO_PA29) // Timer Counter 2 external clock input +#define AT91C_PIO_PA30 (1 << 30) // Pin Controlled by PA30 +#define AT91C_PA30_IRQ1 (AT91C_PIO_PA30) // External Interrupt 1 +#define AT91C_PA30_NPCS2 (AT91C_PIO_PA30) // SPI Peripheral Chip Select 2 +#define AT91C_PIO_PA31 (1 << 31) // Pin Controlled by PA31 +#define AT91C_PA31_NPCS1 (AT91C_PIO_PA31) // SPI Peripheral Chip Select 1 +#define AT91C_PA31_PCK2 (AT91C_PIO_PA31) // PMC Programmable Clock Output 2 + +// ***************************************************************************** +// PERIPHERAL ID DEFINITIONS FOR AT91SAM7S512 +// ***************************************************************************** +#define AT91C_ID_FIQ ( 0) // Advanced Interrupt Controller (FIQ) +#define AT91C_ID_SYS ( 1) // System Peripheral +#define AT91C_ID_PIOA ( 2) // Parallel IO Controller +#define AT91C_ID_3_Reserved ( 3) // Reserved +#define AT91C_ID_ADC ( 4) // Analog-to-Digital Converter +#define AT91C_ID_SPI ( 5) // Serial Peripheral Interface +#define AT91C_ID_US0 ( 6) // USART 0 +#define AT91C_ID_US1 ( 7) // USART 1 +#define AT91C_ID_SSC ( 8) // Serial Synchronous Controller +#define AT91C_ID_TWI ( 9) // Two-Wire Interface +#define AT91C_ID_PWMC (10) // PWM Controller +#define AT91C_ID_UDP (11) // USB Device Port +#define AT91C_ID_TC0 (12) // Timer Counter 0 +#define AT91C_ID_TC1 (13) // Timer Counter 1 +#define AT91C_ID_TC2 (14) // Timer Counter 2 +#define AT91C_ID_15_Reserved (15) // Reserved +#define AT91C_ID_16_Reserved (16) // Reserved +#define AT91C_ID_17_Reserved (17) // Reserved +#define AT91C_ID_18_Reserved (18) // Reserved +#define AT91C_ID_19_Reserved (19) // Reserved +#define AT91C_ID_20_Reserved (20) // Reserved +#define AT91C_ID_21_Reserved (21) // Reserved +#define AT91C_ID_22_Reserved (22) // Reserved +#define AT91C_ID_23_Reserved (23) // Reserved +#define AT91C_ID_24_Reserved (24) // Reserved +#define AT91C_ID_25_Reserved (25) // Reserved +#define AT91C_ID_26_Reserved (26) // Reserved +#define AT91C_ID_27_Reserved (27) // Reserved +#define AT91C_ID_28_Reserved (28) // Reserved +#define AT91C_ID_29_Reserved (29) // Reserved +#define AT91C_ID_IRQ0 (30) // Advanced Interrupt Controller (IRQ0) +#define AT91C_ID_IRQ1 (31) // Advanced Interrupt Controller (IRQ1) +#define AT91C_ALL_INT (0xC0007FF7) // ALL VALID INTERRUPTS + +// ***************************************************************************** +// BASE ADDRESS DEFINITIONS FOR AT91SAM7S512 +// ***************************************************************************** +#define AT91C_BASE_SYS (AT91_CAST(AT91PS_SYS) 0xFFFFF000) // (SYS) Base Address +#define AT91C_BASE_AIC (AT91_CAST(AT91PS_AIC) 0xFFFFF000) // (AIC) Base Address +#define AT91C_BASE_PDC_DBGU (AT91_CAST(AT91PS_PDC) 0xFFFFF300) // (PDC_DBGU) Base Address +#define AT91C_BASE_DBGU (AT91_CAST(AT91PS_DBGU) 0xFFFFF200) // (DBGU) Base Address +#define AT91C_BASE_PIOA (AT91_CAST(AT91PS_PIO) 0xFFFFF400) // (PIOA) Base Address +#define AT91C_BASE_CKGR (AT91_CAST(AT91PS_CKGR) 0xFFFFFC20) // (CKGR) Base Address +#define AT91C_BASE_PMC (AT91_CAST(AT91PS_PMC) 0xFFFFFC00) // (PMC) Base Address +#define AT91C_BASE_RSTC (AT91_CAST(AT91PS_RSTC) 0xFFFFFD00) // (RSTC) Base Address +#define AT91C_BASE_RTTC (AT91_CAST(AT91PS_RTTC) 0xFFFFFD20) // (RTTC) Base Address +#define AT91C_BASE_PITC (AT91_CAST(AT91PS_PITC) 0xFFFFFD30) // (PITC) Base Address +#define AT91C_BASE_WDTC (AT91_CAST(AT91PS_WDTC) 0xFFFFFD40) // (WDTC) Base Address +#define AT91C_BASE_VREG (AT91_CAST(AT91PS_VREG) 0xFFFFFD60) // (VREG) Base Address +#define AT91C_BASE_EFC0 (AT91_CAST(AT91PS_EFC) 0xFFFFFF60) // (EFC0) Base Address +#define AT91C_BASE_EFC1 (AT91_CAST(AT91PS_EFC) 0xFFFFFF70) // (EFC1) Base Address +#define AT91C_BASE_MC (AT91_CAST(AT91PS_MC) 0xFFFFFF00) // (MC) Base Address +#define AT91C_BASE_PDC_SPI (AT91_CAST(AT91PS_PDC) 0xFFFE0100) // (PDC_SPI) Base Address +#define AT91C_BASE_SPI (AT91_CAST(AT91PS_SPI) 0xFFFE0000) // (SPI) Base Address +#define AT91C_BASE_PDC_ADC (AT91_CAST(AT91PS_PDC) 0xFFFD8100) // (PDC_ADC) Base Address +#define AT91C_BASE_ADC (AT91_CAST(AT91PS_ADC) 0xFFFD8000) // (ADC) Base Address +#define AT91C_BASE_PDC_SSC (AT91_CAST(AT91PS_PDC) 0xFFFD4100) // (PDC_SSC) Base Address +#define AT91C_BASE_SSC (AT91_CAST(AT91PS_SSC) 0xFFFD4000) // (SSC) Base Address +#define AT91C_BASE_PDC_US1 (AT91_CAST(AT91PS_PDC) 0xFFFC4100) // (PDC_US1) Base Address +#define AT91C_BASE_US1 (AT91_CAST(AT91PS_USART) 0xFFFC4000) // (US1) Base Address +#define AT91C_BASE_PDC_US0 (AT91_CAST(AT91PS_PDC) 0xFFFC0100) // (PDC_US0) Base Address +#define AT91C_BASE_US0 (AT91_CAST(AT91PS_USART) 0xFFFC0000) // (US0) Base Address +#define AT91C_BASE_TWI (AT91_CAST(AT91PS_TWI) 0xFFFB8000) // (TWI) Base Address +#define AT91C_BASE_TC0 (AT91_CAST(AT91PS_TC) 0xFFFA0000) // (TC0) Base Address +#define AT91C_BASE_TC1 (AT91_CAST(AT91PS_TC) 0xFFFA0040) // (TC1) Base Address +#define AT91C_BASE_TC2 (AT91_CAST(AT91PS_TC) 0xFFFA0080) // (TC2) Base Address +#define AT91C_BASE_TCB (AT91_CAST(AT91PS_TCB) 0xFFFA0000) // (TCB) Base Address +#define AT91C_BASE_PWMC_CH3 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC260) // (PWMC_CH3) Base Address +#define AT91C_BASE_PWMC_CH2 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC240) // (PWMC_CH2) Base Address +#define AT91C_BASE_PWMC_CH1 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC220) // (PWMC_CH1) Base Address +#define AT91C_BASE_PWMC_CH0 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC200) // (PWMC_CH0) Base Address +#define AT91C_BASE_PWMC (AT91_CAST(AT91PS_PWMC) 0xFFFCC000) // (PWMC) Base Address +#define AT91C_BASE_UDP (AT91_CAST(AT91PS_UDP) 0xFFFB0000) // (UDP) Base Address + +// ***************************************************************************** +// MEMORY MAPPING DEFINITIONS FOR AT91SAM7S512 +// ***************************************************************************** +// ISRAM +#define AT91C_ISRAM (0x00200000) // Internal SRAM base address +#define AT91C_ISRAM_SIZE (0x00010000) // Internal SRAM size in byte (64 Kbytes) +// IFLASH +#define AT91C_IFLASH (0x00100000) // Internal FLASH base address +#define AT91C_IFLASH_SIZE (0x00080000) // Internal FLASH size in byte (512 Kbytes) +#define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH Page Size: 256 bytes +#define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH Lock Region Size: 16 Kbytes +#define AT91C_IFLASH_NB_OF_PAGES (2048) // Internal FLASH Number of Pages: 2048 bytes +#define AT91C_IFLASH_NB_OF_LOCK_BITS (32) // Internal FLASH Number of Lock Bits: 32 bytes + +#endif diff --git a/include/at91sam7s128.h b/include/at91sam7s128.h index 854fae89..708201c8 100644 --- a/include/at91sam7s128.h +++ b/include/at91sam7s128.h @@ -1,639 +1,220 @@ -//----------------------------------------------------------------------------- -// Incomplete register definitions for the AT91SAM7S128 chip. -// Jonathan Westhues, Jul 2005 -//----------------------------------------------------------------------------- +#include #ifndef __AT91SAM7S128_H #define __AT91SAM7S128_H -#define REG(x) (*(volatile unsigned long *)(x)) - -//------------- -// Peripheral IDs - -#define PERIPH_AIC_FIQ 0 -#define PERIPH_SYSIRQ 1 -#define PERIPH_PIOA 2 -#define PERIPH_ADC 4 -#define PERIPH_SPI 5 -#define PERIPH_US0 6 -#define PERIPH_US1 7 -#define PERIPH_SSC 8 -#define PERIPH_TWI 9 -#define PERIPH_PWMC 10 -#define PERIPH_UDP 11 -#define PERIPH_TC0 12 -#define PERIPH_TC1 13 -#define PERIPH_TC2 14 -#define PERIPH_AIC_IRQ0 30 -#define PERIPH_AIC_IRQ1 31 - -//------------- -// Reset Controller - -#define RSTC_BASE (0xfffffd00) - -#define RSTC_CONTROL REG(RSTC_BASE+0x00) -#define RSTC_STATUS REG(RSTC_BASE+0x04) - -#define RST_CONTROL_KEY (0xa5<<24) -#define RST_CONTROL_PROCESSOR_RESET (1<<0) -#define RST_STATUS_TYPE_MASK (7<<8) -#define RST_STATUS_TYPE_POWERUP (0<<8) -#define RST_STATUS_TYPE_WATCHDOG (2<<8) -#define RST_STATUS_TYPE_SOFTWARE (3<<8) -#define RST_STATUS_TYPE_USER (4<<8) -#define RST_STATUS_TYPE_BROWNOUT (5<<8) - - -//------------- -// PWM Controller - -#define PWM_BASE (0xfffcc000) - -#define PWM_MODE REG(PWM_BASE+0x00) -#define PWM_ENABLE REG(PWM_BASE+0x04) -#define PWM_DISABLE REG(PWM_BASE+0x08) -#define PWM_STATUS REG(PWM_BASE+0x0c) -#define PWM_INTERRUPT_ENABLE REG(PWM_BASE+0x10) -#define PWM_INTERRUPT_DISABLE REG(PWM_BASE+0x14) -#define PWM_INTERRUPT_MASK REG(PWM_BASE+0x18) -#define PWM_INTERRUPT_STATUS REG(PWM_BASE+0x1c) -#define PWM_CH_MODE(x) REG(PWM_BASE+0x200+((x)*0x20)) -#define PWM_CH_DUTY_CYCLE(x) REG(PWM_BASE+0x204+((x)*0x20)) -#define PWM_CH_PERIOD(x) REG(PWM_BASE+0x208+((x)*0x20)) -#define PWM_CH_COUNTER(x) REG(PWM_BASE+0x20c+((x)*0x20)) -#define PWM_CH_UPDATE(x) REG(PWM_BASE+0x210+((x)*0x20)) - -#define PWM_MODE_DIVA(x) ((x)<<0) -#define PWM_MODE_PREA(x) ((x)<<8) -#define PWM_MODE_DIVB(x) ((x)<<16) -#define PWM_MODE_PREB(x) ((x)<<24) - -#define PWM_CHANNEL(x) (1<<(x)) - -#define PWM_CH_MODE_PRESCALER(x) ((x)<<0) -#define PWM_CH_MODE_PERIOD_CENTER_ALIGNED (1<<8) -#define PWM_CH_MODE_POLARITY_STARTS_HIGH (1<<9) -#define PWM_CH_MODE_UPDATE_UPDATES_PERIOD (1<<10) - -//------------- -// Debug Unit - -#define DBG_BASE (0xfffff200) - -#define DBGU_CR REG(DBG_BASE+0x0000) -#define DBGU_MR REG(DBG_BASE+0x0004) -#define DBGU_IER REG(DBG_BASE+0x0008) -#define DBGU_IDR REG(DBG_BASE+0x000C) -#define DBGU_IMR REG(DBG_BASE+0x0010) -#define DBGU_SR REG(DBG_BASE+0x0014) -#define DBGU_RHR REG(DBG_BASE+0x0018) -#define DBGU_THR REG(DBG_BASE+0x001C) -#define DBGU_BRGR REG(DBG_BASE+0x0020) -#define DBGU_CIDR REG(DBG_BASE+0x0040) -#define DBGU_EXID REG(DBG_BASE+0x0044) -#define DBGU_FNR REG(DBG_BASE+0x0048) - -//------------- -// Embedded Flash Controller - -#define MC_BASE (0xffffff00) - -#define MC_FLASH_MODE0 REG(MC_BASE+0x60) -#define MC_FLASH_COMMAND REG(MC_BASE+0x64) -#define MC_FLASH_STATUS REG(MC_BASE+0x68) -#define MC_FLASH_MODE1 REG(MC_BASE+0x70) - -#define MC_FLASH_MODE_READY_INTERRUPT_ENABLE (1<<0) -#define MC_FLASH_MODE_LOCK_INTERRUPT_ENABLE (1<<2) -#define MC_FLASH_MODE_PROG_ERROR_INTERRUPT_ENABLE (1<<3) -#define MC_FLASH_MODE_NO_ERASE_BEFORE_PROGRAMMING (1<<7) -#define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x)<<8) -#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) ((x)<<16) - -#define MC_FLASH_COMMAND_FCMD(x) ((x)<<0) -#define MC_FLASH_COMMAND_PAGEN(x) ((x)<<8) -#define MC_FLASH_COMMAND_KEY ((0x5a)<<24) - -#define FCMD_NOP 0x0 -#define FCMD_WRITE_PAGE 0x1 -#define FCMD_SET_LOCK_BIT 0x2 -#define FCMD_WRITE_PAGE_LOCK 0x3 -#define FCMD_CLEAR_LOCK_BIT 0x4 -#define FCMD_ERASE_ALL 0x8 -#define FCMD_SET_GP_NVM_BIT 0xb -#define FCMD_SET_SECURITY_BIT 0xf - -#define MC_FLASH_STATUS_READY (1<<0) -#define MC_FLASH_STATUS_LOCK_ERROR (1<<2) -#define MC_FLASH_STATUS_PROGRAMMING_ERROR (1<<3) -#define MC_FLASH_STATUS_SECURITY_BIT_ACTIVE (1<<4) -#define MC_FLASH_STATUS_GP_NVM_ACTIVE_0 (1<<8) -#define MC_FLASH_STATUS_GP_NVM_ACTIVE_1 (1<<9) -#define MC_FLASH_STATUS_LOCK_ACTIVE(x) (1<<((x)+16)) - -#define FLASH_PAGE_SIZE_BYTES 256 -#define FLASH_PAGE_COUNT 512 - -//------------- -// Watchdog Timer - 12 bit down counter, uses slow clock divided by 128 as source - -#define WDT_BASE (0xfffffd40) - -#define WDT_CONTROL REG(WDT_BASE+0x00) -#define WDT_MODE REG(WDT_BASE+0x04) -#define WDT_STATUS REG(WDT_BASE+0x08) - -#define WDT_HIT() WDT_CONTROL = 0xa5000001 - -#define WDT_MODE_COUNT(x) ((x)<<0) -#define WDT_MODE_INTERRUPT_ON_EVENT (1<<12) -#define WDT_MODE_RESET_ON_EVENT_ENABLE (1<<13) -#define WDT_MODE_RESET_ON_EVENT (1<<14) -#define WDT_MODE_WATCHDOG_DELTA(x) ((x)<<16) -#define WDT_MODE_HALT_IN_DEBUG_MODE (1<<28) -#define WDT_MODE_HALT_IN_IDLE_MODE (1<<29) -#define WDT_MODE_DISABLE (1<<15) - -//------------- -// Parallel Input/Output Controller - -#define PIO_BASE (0xfffff400) - -#define PIO_ENABLE REG(PIO_BASE+0x000) -#define PIO_DISABLE REG(PIO_BASE+0x004) -#define PIO_STATUS REG(PIO_BASE+0x008) -#define PIO_OUTPUT_ENABLE REG(PIO_BASE+0x010) -#define PIO_OUTPUT_DISABLE REG(PIO_BASE+0x014) -#define PIO_OUTPUT_STATUS REG(PIO_BASE+0x018) -#define PIO_GLITCH_ENABLE REG(PIO_BASE+0x020) -#define PIO_GLITCH_DISABLE REG(PIO_BASE+0x024) -#define PIO_GLITCH_STATUS REG(PIO_BASE+0x028) -#define PIO_OUTPUT_DATA_SET REG(PIO_BASE+0x030) -#define PIO_OUTPUT_DATA_CLEAR REG(PIO_BASE+0x034) -#define PIO_OUTPUT_DATA_STATUS REG(PIO_BASE+0x038) -#define PIO_PIN_DATA_STATUS REG(PIO_BASE+0x03c) -#define PIO_OPEN_DRAIN_ENABLE REG(PIO_BASE+0x050) -#define PIO_OPEN_DRAIN_DISABLE REG(PIO_BASE+0x054) -#define PIO_OPEN_DRAIN_STATUS REG(PIO_BASE+0x058) -#define PIO_NO_PULL_UP_ENABLE REG(PIO_BASE+0x060) -#define PIO_NO_PULL_UP_DISABLE REG(PIO_BASE+0x064) -#define PIO_NO_PULL_UP_STATUS REG(PIO_BASE+0x068) -#define PIO_PERIPHERAL_A_SEL REG(PIO_BASE+0x070) -#define PIO_PERIPHERAL_B_SEL REG(PIO_BASE+0x074) -#define PIO_PERIPHERAL_WHICH REG(PIO_BASE+0x078) -#define PIO_OUT_WRITE_ENABLE REG(PIO_BASE+0x0a0) -#define PIO_OUT_WRITE_DISABLE REG(PIO_BASE+0x0a4) -#define PIO_OUT_WRITE_STATUS REG(PIO_BASE+0x0a8) - -//------------- -// USB Device Port - -#define UDP_BASE (0xfffb0000) - -#define UDP_FRAME_NUMBER REG(UDP_BASE+0x0000) -#define UDP_GLOBAL_STATE REG(UDP_BASE+0x0004) -#define UDP_FUNCTION_ADDR REG(UDP_BASE+0x0008) -#define UDP_INTERRUPT_ENABLE REG(UDP_BASE+0x0010) -#define UDP_INTERRUPT_DISABLE REG(UDP_BASE+0x0014) -#define UDP_INTERRUPT_MASK REG(UDP_BASE+0x0018) -#define UDP_INTERRUPT_STATUS REG(UDP_BASE+0x001c) -#define UDP_INTERRUPT_CLEAR REG(UDP_BASE+0x0020) -#define UDP_RESET_ENDPOINT REG(UDP_BASE+0x0028) -#define UDP_ENDPOINT_CSR(x) REG(UDP_BASE+0x0030+((x)*4)) -#define UDP_ENDPOINT_FIFO(x) REG(UDP_BASE+0x0050+((x)*4)) -#define UDP_TRANSCEIVER_CTRL REG(UDP_BASE+0x0074) - -#define UDP_GLOBAL_STATE_ADDRESSED (1<<0) -#define UDP_GLOBAL_STATE_CONFIGURED (1<<1) -#define UDP_GLOBAL_STATE_SEND_RESUME_ENABLED (1<<2) -#define UDP_GLOBAL_STATE_RESUME_RECEIVED (1<<3) -#define UDP_GLOBAL_STATE_REMOTE_WAKE_UP_ENABLED (1<<4) - -#define UDP_FUNCTION_ADDR_ENABLED (1<<8) - -#define UDP_INTERRUPT_ENDPOINT(x) (1<<(x)) -#define UDP_INTERRUPT_SUSPEND (1<<8) -#define UDP_INTERRUPT_RESUME (1<<9) -#define UDP_INTERRUPT_EXTERNAL_RESUME (1<<10) -#define UDP_INTERRUPT_SOF (1<<11) -#define UDP_INTERRUPT_END_OF_BUS_RESET (1<<12) -#define UDP_INTERRUPT_WAKEUP (1<<13) - -#define UDP_RESET_ENDPOINT_NUMBER(x) (1<<(x)) - -#define UDP_CSR_TX_PACKET_ACKED (1<<0) -#define UDP_CSR_RX_PACKET_RECEIVED_BANK_0 (1<<1) -#define UDP_CSR_RX_HAVE_READ_SETUP_DATA (1<<2) -#define UDP_CSR_STALL_SENT (1<<3) -#define UDP_CSR_TX_PACKET (1<<4) -#define UDP_CSR_FORCE_STALL (1<<5) -#define UDP_CSR_RX_PACKET_RECEIVED_BANK_1 (1<<6) -#define UDP_CSR_CONTROL_DATA_DIR (1<<7) -#define UDP_CSR_EPTYPE_CONTROL (0<<8) -#define UDP_CSR_EPTYPE_ISOCHRON_OUT (1<<8) -#define UDP_CSR_EPTYPE_ISOCHRON_IN (5<<8) -#define UDP_CSR_EPTYPE_BULK_OUT (2<<8) -#define UDP_CSR_EPTYPE_BULK_IN (6<<8) -#define UDP_CSR_EPTYPE_INTERRUPT_OUT (3<<8) -#define UDP_CSR_EPTYPE_INTERRUPT_IN (7<<8) -#define UDP_CSR_IS_DATA1 (1<<11) -#define UDP_CSR_ENABLE_EP (1<<15) -#define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff) - -#define UDP_TRANSCEIVER_CTRL_DISABLE (1<<8) - -//------------- -// Power Management Controller - -#define PMC_BASE (0xfffffc00) - -#define PMC_SYS_CLK_ENABLE REG(PMC_BASE+0x0000) -#define PMC_SYS_CLK_DISABLE REG(PMC_BASE+0x0004) -#define PMC_SYS_CLK_STATUS REG(PMC_BASE+0x0008) -#define PMC_PERIPHERAL_CLK_ENABLE REG(PMC_BASE+0x0010) -#define PMC_PERIPHERAL_CLK_DISABLE REG(PMC_BASE+0x0014) -#define PMC_PERIPHERAL_CLK_STATUS REG(PMC_BASE+0x0018) -#define PMC_MAIN_OSCILLATOR REG(PMC_BASE+0x0020) -#define PMC_MAIN_CLK_FREQUENCY REG(PMC_BASE+0x0024) -#define PMC_PLL REG(PMC_BASE+0x002c) -#define PMC_MASTER_CLK REG(PMC_BASE+0x0030) -#define PMC_PROGRAMMABLE_CLK_0 REG(PMC_BASE+0x0040) -#define PMC_PROGRAMMABLE_CLK_1 REG(PMC_BASE+0x0044) -#define PMC_INTERRUPT_ENABLE REG(PMC_BASE+0x0060) -#define PMC_INTERRUPT_DISABLE REG(PMC_BASE+0x0064) -#define PMC_INTERRUPT_STATUS REG(PMC_BASE+0x0068) -#define PMC_INTERRUPT_MASK REG(PMC_BASE+0x006c) - -#define PMC_SYS_CLK_PROCESSOR_CLK (1<<0) -#define PMC_SYS_CLK_UDP_CLK (1<<7) -#define PMC_SYS_CLK_PROGRAMMABLE_CLK_0 (1<<8) -#define PMC_SYS_CLK_PROGRAMMABLE_CLK_1 (1<<9) -#define PMC_SYS_CLK_PROGRAMMABLE_CLK_2 (1<<10) - -#define PMC_MAIN_OSCILLATOR_STABILIZED (1<<0) -#define PMC_MAIN_OSCILLATOR_PLL_LOCK (1<<2) -#define PMC_MAIN_OSCILLATOR_MCK_READY (1<<3) -#define PMC_MAIN_OSCILLATOR_ENABLE (1<<0) -#define PMC_MAIN_OSCILLATOR_BYPASS (1<<1) -#define PMC_MAIN_OSCILLATOR_STARTUP_DELAY(x) ((x)<<8) - -#define PMC_PLL_DIVISOR(x) (x) -#define PMC_PLL_COUNT_BEFORE_LOCK(x) ((x)<<8) -#define PMC_PLL_FREQUENCY_RANGE(x) ((x)<<14) -#define PMC_PLL_MULTIPLIER(x) (((x)-1)<<16) -#define PMC_PLL_USB_DIVISOR(x) ((x)<<28) - -#define PMC_CLK_SELECTION_PLL_CLOCK (3<<0) -#define PMC_CLK_SELECTION_MAIN_CLOCK (1<<0) -#define PMC_CLK_SELECTION_SLOW_CLOCK (0<<0) -#define PMC_CLK_PRESCALE_DIV_1 (0<<2) -#define PMC_CLK_PRESCALE_DIV_2 (1<<2) -#define PMC_CLK_PRESCALE_DIV_4 (2<<2) -#define PMC_CLK_PRESCALE_DIV_8 (3<<2) -#define PMC_CLK_PRESCALE_DIV_16 (4<<2) -#define PMC_CLK_PRESCALE_DIV_32 (5<<2) -#define PMC_CLK_PRESCALE_DIV_64 (6<<2) - -//------------- -// Serial Peripheral Interface (SPI) - -#define SPI_BASE (0xfffe0000) - -#define SPI_CONTROL REG(SPI_BASE+0x00) -#define SPI_MODE REG(SPI_BASE+0x04) -#define SPI_RX_DATA REG(SPI_BASE+0x08) -#define SPI_TX_DATA REG(SPI_BASE+0x0c) -#define SPI_STATUS REG(SPI_BASE+0x10) -#define SPI_INTERRUPT_ENABLE REG(SPI_BASE+0x14) -#define SPI_INTERRUPT_DISABLE REG(SPI_BASE+0x18) -#define SPI_INTERRUPT_MASK REG(SPI_BASE+0x1c) -#define SPI_FOR_CHIPSEL_0 REG(SPI_BASE+0x30) -#define SPI_FOR_CHIPSEL_1 REG(SPI_BASE+0x34) -#define SPI_FOR_CHIPSEL_2 REG(SPI_BASE+0x38) -#define SPI_FOR_CHIPSEL_3 REG(SPI_BASE+0x3c) - -#define SPI_CONTROL_ENABLE (1<<0) -#define SPI_CONTROL_DISABLE (1<<1) -#define SPI_CONTROL_RESET (1<<7) -#define SPI_CONTROL_LAST_TRANSFER (1<<24) - -#define SPI_MODE_MASTER (1<<0) -#define SPI_MODE_VARIABLE_CHIPSEL (1<<1) -#define SPI_MODE_CHIPSELS_DECODED (1<<2) -#define SPI_MODE_USE_DIVIDED_CLOCK (1<<3) -#define SPI_MODE_MODE_FAULT_DETECTION_OFF (1<<4) -#define SPI_MODE_LOOPBACK (1<<7) -#define SPI_MODE_CHIPSEL(x) ((x)<<16) -#define SPI_MODE_DELAY_BETWEEN_CHIPSELS(x) ((x)<<24) - -#define SPI_RX_DATA_CHIPSEL(x) (((x)>>16)&0xf) - -#define SPI_TX_DATA_CHIPSEL(x) ((x)<<16) -#define SPI_TX_DATA_LAST_TRANSFER (1<<24) - -#define SPI_STATUS_RECEIVE_FULL (1<<0) -#define SPI_STATUS_TRANSMIT_EMPTY (1<<1) -#define SPI_STATUS_MODE_FAULT (1<<2) -#define SPI_STATUS_OVERRUN (1<<3) -#define SPI_STATUS_END_OF_RX_BUFFER (1<<4) -#define SPI_STATUS_END_OF_TX_BUFFER (1<<5) -#define SPI_STATUS_RX_BUFFER_FULL (1<<6) -#define SPI_STATUS_TX_BUFFER_EMPTY (1<<7) -#define SPI_STATUS_NSS_RISING_DETECTED (1<<8) -#define SPI_STATUS_TX_EMPTY (1<<9) -#define SPI_STATUS_SPI_ENABLED (1<<16) - -#define SPI_FOR_CHIPSEL_INACTIVE_CLK_1 (1<<0) -#define SPI_FOR_CHIPSEL_PHASE (1<<1) -#define SPI_FOR_CHIPSEL_LEAVE_CHIPSEL_LOW (1<<3) -#define SPI_FOR_CHIPSEL_BITS_IN_WORD(x) ((x)<<4) -#define SPI_FOR_CHIPSEL_DIVISOR(x) ((x)<<8) -#define SPI_FOR_CHIPSEL_DELAY_BEFORE_CLK(x) ((x)<<16) -#define SPI_FOR_CHIPSEL_INTERWORD_DELAY(x) ((x)<<24) - -//------------- -// Analog to Digital Converter - -#define ADC_BASE (0xfffd8000) - -#define ADC_CONTROL REG(ADC_BASE+0x00) -#define ADC_MODE REG(ADC_BASE+0x04) -#define ADC_CHANNEL_ENABLE REG(ADC_BASE+0x10) -#define ADC_CHANNEL_DISABLE REG(ADC_BASE+0x14) -#define ADC_CHANNEL_STATUS REG(ADC_BASE+0x18) -#define ADC_STATUS REG(ADC_BASE+0x1c) -#define ADC_LAST_CONVERTED_DATA REG(ADC_BASE+0x20) -#define ADC_INTERRUPT_ENABLE REG(ADC_BASE+0x24) -#define ADC_INTERRUPT_DISABLE REG(ADC_BASE+0x28) -#define ADC_INTERRUPT_MASK REG(ADC_BASE+0x2c) -#define ADC_CHANNEL_DATA(x) REG(ADC_BASE+0x30+(4*(x))) - -#define ADC_CONTROL_RESET (1<<0) -#define ADC_CONTROL_START (1<<1) - -#define ADC_MODE_HW_TRIGGERS_ENABLED (1<<0) -#define ADC_MODE_8_BIT_RESOLUTION (1<<4) -#define ADC_MODE_SLEEP (1<<5) -#define ADC_MODE_PRESCALE(x) ((x)<<8) -#define ADC_MODE_STARTUP_TIME(x) ((x)<<16) -#define ADC_MODE_SAMPLE_HOLD_TIME(x) ((x)<<24) - -#define ADC_CHANNEL(x) (1<<(x)) - -#define ADC_END_OF_CONVERSION(x) (1<<(x)) -#define ADC_OVERRUN_ERROR(x) (1<<(8+(x))) -#define ADC_DATA_READY (1<<16) -#define ADC_GENERAL_OVERRUN (1<<17) -#define ADC_END_OF_RX_BUFFER (1<<18) -#define ADC_RX_BUFFER_FULL (1<<19) - -#define ADC_CHAN_LF 4 -#define ADC_CHAN_HF 5 -//------------- -// Synchronous Serial Controller - -#define SSC_BASE (0xfffd4000) - -#define SSC_CONTROL REG(SSC_BASE+0x00) -#define SSC_CLOCK_DIVISOR REG(SSC_BASE+0x04) -#define SSC_RECEIVE_CLOCK_MODE REG(SSC_BASE+0x10) -#define SSC_RECEIVE_FRAME_MODE REG(SSC_BASE+0x14) -#define SSC_TRANSMIT_CLOCK_MODE REG(SSC_BASE+0x18) -#define SSC_TRANSMIT_FRAME_MODE REG(SSC_BASE+0x1c) -#define SSC_RECEIVE_HOLDING REG(SSC_BASE+0x20) -#define SSC_TRANSMIT_HOLDING REG(SSC_BASE+0x24) -#define SSC_RECEIVE_SYNC_HOLDING REG(SSC_BASE+0x30) -#define SSC_TRANSMIT_SYNC_HOLDING REG(SSC_BASE+0x34) -#define SSC_STATUS REG(SSC_BASE+0x40) -#define SSC_INTERRUPT_ENABLE REG(SSC_BASE+0x44) -#define SSC_INTERRUPT_DISABLE REG(SSC_BASE+0x48) -#define SSC_INTERRUPT_MASK REG(SSC_BASE+0x4c) - -#define SSC_CONTROL_RX_ENABLE (1<<0) -#define SSC_CONTROL_RX_DISABLE (1<<1) -#define SSC_CONTROL_TX_ENABLE (1<<8) -#define SSC_CONTROL_TX_DISABLE (1<<9) -#define SSC_CONTROL_RESET (1<<15) - -#define SSC_CLOCK_MODE_SELECT(x) ((x)<<0) -#define SSC_CLOCK_MODE_OUTPUT(x) ((x)<<2) -#define SSC_CLOCK_MODE_INVERT (1<<5) -#define SSC_CLOCK_MODE_START(x) ((x)<<8) -#define SSC_CLOCK_MODE_START_DELAY(x) ((x)<<16) -#define SSC_CLOCK_MODE_FRAME_PERIOD(x) ((x)<<24) - -#define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1)<<0) -#define SSC_FRAME_MODE_LOOPBACK (1<<5) // for RX -#define SSC_FRAME_MODE_DEFAULT_IS_1 (1<<5) // for TX -#define SSC_FRAME_MODE_MSB_FIRST (1<<7) -#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x) ((x)<<8) -#define SSC_FRAME_MODE_FRAME_SYNC_LEN(x) ((x)<<16) -#define SSC_FRAME_MODE_FRAME_SYNC_TYPE(x) ((x)<<20) -#define SSC_FRAME_MODE_SYNC_DATA_ENABLE (1<<23) // for TX only -#define SSC_FRAME_MODE_NEGATIVE_EDGE (1<<24) - -#define SSC_STATUS_TX_READY (1<<0) -#define SSC_STATUS_TX_EMPTY (1<<1) -#define SSC_STATUS_TX_ENDED (1<<2) -#define SSC_STATUS_TX_BUF_EMPTY (1<<3) -#define SSC_STATUS_RX_READY (1<<4) -#define SSC_STATUS_RX_OVERRUN (1<<5) -#define SSC_STATUS_RX_ENDED (1<<6) -#define SSC_STATUS_RX_BUF_FULL (1<<7) -#define SSC_STATUS_TX_SYNC_OCCURRED (1<<10) -#define SSC_STATUS_RX_SYNC_OCCURRED (1<<11) -#define SSC_STATUS_TX_ENABLED (1<<16) -#define SSC_STATUS_RX_ENABLED (1<<17) - -//------------- -// Peripheral DMA Controller -// -// There is one set of registers for every peripheral that supports DMA. - -#define PDC_RX_POINTER(x) REG((x)+0x100) -#define PDC_RX_COUNTER(x) REG((x)+0x104) -#define PDC_TX_POINTER(x) REG((x)+0x108) -#define PDC_TX_COUNTER(x) REG((x)+0x10c) -#define PDC_RX_NEXT_POINTER(x) REG((x)+0x110) -#define PDC_RX_NEXT_COUNTER(x) REG((x)+0x114) -#define PDC_TX_NEXT_POINTER(x) REG((x)+0x118) -#define PDC_TX_NEXT_COUNTER(x) REG((x)+0x11c) -#define PDC_CONTROL(x) REG((x)+0x120) -#define PDC_STATUS(x) REG((x)+0x124) - -#define PDC_RX_ENABLE (1<<0) -#define PDC_RX_DISABLE (1<<1) -#define PDC_TX_ENABLE (1<<8) -#define PDC_TX_DISABLE (1<<9) - -//------------- -// Timer/Counter base - -#define TC_BASE (0xfffa0000) - -#define TC_BCR REG(TC_BASE+0xC0) -#define TC_BMR REG(TC_BASE+0xC4) - -#define TC_BCR_SYNC (1<<0) - -#define TC_CCR_CLKEN (1<<0) -#define TC_CCR_CLKDIS (1<<1) -#define TC_CCR_SWTRG (1<<2) - -#define TC_CMR_TCCLKS (7<<0) -#define TC_CMR_TCCLKS_TIMER_CLOCK1 (0<<0) -#define TC_CMR_TCCLKS_TIMER_CLOCK2 (1<<0) -#define TC_CMR_TCCLKS_TIMER_CLOCK3 (2<<0) -#define TC_CMR_TCCLKS_TIMER_CLOCK4 (3<<0) -#define TC_CMR_TCCLKS_TIMER_CLOCK5 (4<<0) -#define TC_CMR_TCCLKS_XC0 (5<<0) -#define TC_CMR_TCCLKS_XC1 (6<<0) -#define TC_CMR_TCCLKS_XC2 (7<<0) -#define TC_CMR_CLKI (1<<3) -#define TC_CMR_BURST (3<<4) -#define TC_CMR_BURST_XC0 (1<<4) -#define TC_CMR_BURST_XC1 (2<<4) -#define TC_CMR_BURST_XC2 (3<<4) -#define TC_CMR_LDBSTOP (1<<6) -#define TC_CMR_CPCSTOP (1<<6) -#define TC_CMR_LDBDIS (1<<7) -#define TC_CMR_CPCDIS (1<<7) -#define TC_CMR_ETRGEDG (3<<8) -#define TC_CMR_ETRGEDG_NONE (0<<8) -#define TC_CMR_ETRGEDG_RISING (1<<8) -#define TC_CMR_ETRGEDG_FALLING (2<<8) -#define TC_CMR_ETRGEDG_EACH (3<<8) -#define TC_CMR_EEVTEDG (3<<8) -#define TC_CMR_EEVTEDG_NONE (0<<8) -#define TC_CMR_EEVTEDG_RISING (1<<8) -#define TC_CMR_EEVTEDG_FALLING (2<<8) -#define TC_CMR_EEVTEDG_EACH (3<<8) -#define TC_CMR_ABETRG (1<<10) -#define TC_CMR_EEVT (3<<10) -#define TC_CMR_EEVT_TIOB (0<<10) -#define TC_CMR_EEVT_XC0 (1<<10) -#define TC_CMR_EEVT_XC1 (2<<10) -#define TC_CMR_EEVT_XC2 (3<<10) -#define TC_CMR_ENETRG (1<<12) -#define TC_CMR_WAVSEL (3<<13) -#define TC_CMR_WAVSEL_UP (0<<13) -#define TC_CMR_WAVSEL_UP_AUTO (2<<13) -#define TC_CMR_WAVSEL_UPDOWN (1<<13) -#define TC_CMR_WAVSEL_UPDOWN_AUTO (3<<13) -#define TC_CMR_CPCTRG (1<<14) -#define TC_CMR_WAVE (1<<15) -#define TC_CMR_LDRA (3<<16) -#define TC_CMR_LDRA_NONE (0<<16) -#define TC_CMR_LDRA_RISING (1<<16) -#define TC_CMR_LDRA_FALLING (2<<16) -#define TC_CMR_LDRA_EACH (3<<16) -#define TC_CMR_ACPA (3<<16) -#define TC_CMR_ACPA_NONE (0<<16) -#define TC_CMR_ACPA_SET (1<<16) -#define TC_CMR_ACPA_CLEAR (2<<16) -#define TC_CMR_ACPA_TOGGLE (3<<16) -#define TC_CMR_LDRB (3<<18) -#define TC_CMR_LDRB_NONE (0<<18) -#define TC_CMR_LDRB_RISING (1<<18) -#define TC_CMR_LDRB_FALLING (2<<18) -#define TC_CMR_LDRB_EACH (3<<18) -#define TC_CMR_ACPC (3<<18) -#define TC_CMR_ACPC_NONE (0<<18) -#define TC_CMR_ACPC_SET (1<<18) -#define TC_CMR_ACPC_CLEAR (2<<18) -#define TC_CMR_ACPC_TOGGLE (3<<18) -#define TC_CMR_AEEVT (3<<20) -#define TC_CMR_AEEVT_NONE (0<<20) -#define TC_CMR_AEEVT_SET (1<<20) -#define TC_CMR_AEEVT_CLEAR (2<<20) -#define TC_CMR_AEEVT_TOGGLE (3<<20) -#define TC_CMR_ASWTRG (3<<22) -#define TC_CMR_ASWTRG_NONE (0<<22) -#define TC_CMR_ASWTRG_SET (1<<22) -#define TC_CMR_ASWTRG_CLEAR (2<<22) -#define TC_CMR_ASWTRG_TOGGLE (3<<22) -#define TC_CMR_BCPB (3<<24) -#define TC_CMR_BCPB_NONE (0<<24) -#define TC_CMR_BCPB_SET (1<<24) -#define TC_CMR_BCPB_CLEAR (2<<24) -#define TC_CMR_BCPB_TOGGLE (3<<24) -#define TC_CMR_BCPC (3<<26) -#define TC_CMR_BCPC_NONE (0<<26) -#define TC_CMR_BCPC_SET (1<<26) -#define TC_CMR_BCPC_CLEAR (2<<26) -#define TC_CMR_BCPC_TOGGLE (3<<26) -#define TC_CMR_BEEVT (3<<28) -#define TC_CMR_BEEVT_NONE (0<<28) -#define TC_CMR_BEEVT_SET (1<<28) -#define TC_CMR_BEEVT_CLEAR (2<<28) -#define TC_CMR_BEEVT_TOGGLE (3<<28) -#define TC_CMR_BSWTRG (3<<30) -#define TC_CMR_BSWTRG_NONE (0<<30) -#define TC_CMR_BSWTRG_SET (1<<30) -#define TC_CMR_BSWTRG_CLEAR (2<<30) -#define TC_CMR_BSWTRG_TOGGLE (3<<30) - -#define TC_SR_COVFS (1<<0) -#define TC_SR_LOVFS (1<<1) -#define TC_SR_CPAS (1<<2) -#define TC_SR_CPBS (1<<3) -#define TC_SR_CPCS (1<<4) -#define TC_SR_LDRAS (1<<5) -#define TC_SR_LDRBS (1<<6) -#define TC_SR_ETRGS (1<<7) -#define TC_SR_CLKSTA (1<<16) -#define TC_SR_MTIOA (1<<17) -#define TC_SR_MTIOB (1<<18) - -//------------- -// Timer/Counter 0 - -#define TC0_BASE (TC_BASE+0x40*0) - -#define TC0_CCR REG(TC0_BASE+0x00) -#define TC0_CMR REG(TC0_BASE+0x04) -#define TC0_CV REG(TC0_BASE+0x10) -#define TC0_RA REG(TC0_BASE+0x14) -#define TC0_RB REG(TC0_BASE+0x18) -#define TC0_RC REG(TC0_BASE+0x1C) -#define TC0_SR REG(TC0_BASE+0x20) -#define TC0_IER REG(TC0_BASE+0x24) -#define TC0_IDR REG(TC0_BASE+0x28) -#define TC0_IMR REG(TC0_BASE+0x2C) - -//------------- -// Timer/Counter 1 - -#define TC1_BASE (TC_BASE+0x40*1) - -#define TC1_CCR REG(TC1_BASE+0x00) -#define TC1_CMR REG(TC1_BASE+0x04) -#define TC1_CV REG(TC1_BASE+0x10) -#define TC1_RA REG(TC1_BASE+0x14) -#define TC1_RB REG(TC1_BASE+0x18) -#define TC1_RC REG(TC1_BASE+0x1C) -#define TC1_SR REG(TC1_BASE+0x20) -#define TC1_IER REG(TC1_BASE+0x24) -#define TC1_IDR REG(TC1_BASE+0x28) -#define TC1_IMR REG(TC1_BASE+0x2C) - -//------------- -// Timer/Counter 2 - -#define TC2_BASE (TC_BASE+0x40*2) - -#define TC2_CCR REG(TC2_BASE+0x00) -#define TC2_CMR REG(TC2_BASE+0x04) -#define TC2_CV REG(TC2_BASE+0x10) -#define TC2_RA REG(TC2_BASE+0x14) -#define TC2_RB REG(TC2_BASE+0x18) -#define TC2_RC REG(TC2_BASE+0x1C) -#define TC2_SR REG(TC2_BASE+0x20) -#define TC2_IER REG(TC2_BASE+0x24) -#define TC2_IDR REG(TC2_BASE+0x28) -#define TC2_IMR REG(TC2_BASE+0x2C) - +/*************************************************************** + * Start of translation between PM3 defines and AT91 defines + * TODO these should be replaced throughout the code at some stage + ***************************************************************/ +#define PERIPH_PIOA AT91C_ID_PIOA +#define PERIPH_ADC AT91C_ID_ADC +#define PERIPH_SPI AT91C_ID_SPI +#define PERIPH_SSC AT91C_ID_SSC +#define PERIPH_PWMC AT91C_ID_PWMC +#define PERIPH_UDP AT91C_ID_UDP +#define PERIPH_TC1 AT91C_ID_TC1 + +#define SSC_BASE AT91C_BASE_SSC + +#define WDT_CONTROL AT91C_BASE_WDTC->WDTC_WDCR + +#define PWM_ENABLE AT91C_BASE_PWMC->PWMC_ENA + +// TODO WARNING these PWM defines MUST be replaced in the code ASAP before +// someone starts using a value of x other than that selected below +#define PWM_CH_PERIOD(x) AT91C_BASE_PWMC_CH0->PWMC_CPRDR +#define PWM_CH_COUNTER(x) AT91C_BASE_PWMC_CH0->PWMC_CCNTR +#define PWM_CH_MODE(x) AT91C_BASE_PWMC_CH0->PWMC_CMR +#define PWM_CH_DUTY_CYCLE(x) AT91C_BASE_PWMC_CH0->PWMC_CDTYR + +#define PDC_RX_POINTER(x) AT91C_BASE_PDC_SSC->PDC_RPR +#define PDC_RX_COUNTER(x) AT91C_BASE_PDC_SSC->PDC_RCR +#define PDC_RX_NEXT_POINTER(x) AT91C_BASE_PDC_SSC->PDC_RNPR +#define PDC_RX_NEXT_COUNTER(x) AT91C_BASE_PDC_SSC->PDC_RNCR +#define PDC_CONTROL(x) AT91C_BASE_PDC_SSC->PDC_PTCR +// End WARNING + +#define DBGU_CIDR AT91C_BASE_DBGU->DBGU_CIDR + +#define RSTC_CONTROL AT91C_BASE_RSTC->RSTC_RCR +#define RSTC_STATUS AT91C_BASE_RSTC->RSTC_RSR + +#define MC_FLASH_COMMAND AT91C_BASE_EFC0->EFC_FCR +#define MC_FLASH_MODE0 AT91C_BASE_EFC0->EFC_FMR +#define MC_FLASH_MODE1 AT91C_BASE_EFC1->EFC_FMR +#define MC_FLASH_STATUS AT91C_BASE_EFC0->EFC_FSR + +#define ADC_CONTROL AT91C_BASE_ADC->ADC_CR +#define ADC_MODE AT91C_BASE_ADC->ADC_MR +#define ADC_CHANNEL_ENABLE AT91C_BASE_ADC->ADC_CHER +#define ADC_STATUS AT91C_BASE_ADC->ADC_SR +#define ADC_CHANNEL_DATA(x) AT91C_BASE_ADC->ADC_CDR[x] + +#define PIO_ENABLE AT91C_BASE_PIOA->PIO_PER +#define PIO_DISABLE AT91C_BASE_PIOA->PIO_PDR +#define PIO_OUTPUT_ENABLE AT91C_BASE_PIOA->PIO_OER +#define PIO_OUTPUT_DISABLE AT91C_BASE_PIOA->PIO_ODR +#define PIO_OUTPUT_DATA_SET AT91C_BASE_PIOA->PIO_SODR +#define PIO_OUTPUT_DATA_CLEAR AT91C_BASE_PIOA->PIO_CODR +#define PIO_PIN_DATA_STATUS AT91C_BASE_PIOA->PIO_PDSR +#define PIO_NO_PULL_UP_ENABLE AT91C_BASE_PIOA->PIO_PPUDR +#define PIO_NO_PULL_UP_DISABLE AT91C_BASE_PIOA->PIO_PPUER +#define PIO_PERIPHERAL_B_SEL AT91C_BASE_PIOA->PIO_BSR +#define PIO_PERIPHERAL_A_SEL AT91C_BASE_PIOA->PIO_ASR + +#define PMC_SYS_CLK_ENABLE AT91C_BASE_PMC->PMC_SCER +#define PMC_PERIPHERAL_CLK_ENABLE AT91C_BASE_PMC->PMC_PCER +#define PMC_MAIN_OSCILLATOR AT91C_BASE_PMC->PMC_MOR +#define PMC_PLL AT91C_BASE_PMC->PMC_PLLR +#define PMC_MASTER_CLK AT91C_BASE_PMC->PMC_MCKR +#define PMC_PROGRAMMABLE_CLK_0 AT91C_BASE_PMC->PMC_PCKR[0] +#define PMC_INTERRUPT_STATUS AT91C_BASE_PMC->PMC_SR + +#define SSC_CONTROL AT91C_BASE_SSC->SSC_CR +#define SSC_CLOCK_DIVISOR AT91C_BASE_SSC->SSC_CMR +#define SSC_RECEIVE_CLOCK_MODE AT91C_BASE_SSC->SSC_RCMR +#define SSC_RECEIVE_FRAME_MODE AT91C_BASE_SSC->SSC_RFMR +#define SSC_TRANSMIT_CLOCK_MODE AT91C_BASE_SSC->SSC_TCMR +#define SSC_TRANSMIT_FRAME_MODE AT91C_BASE_SSC->SSC_TFMR +#define SSC_RECEIVE_HOLDING AT91C_BASE_SSC->SSC_RHR +#define SSC_TRANSMIT_HOLDING AT91C_BASE_SSC->SSC_THR +#define SSC_STATUS AT91C_BASE_SSC->SSC_SR + +#define SPI_CONTROL AT91C_BASE_SPI->SPI_CR +#define SPI_MODE AT91C_BASE_SPI->SPI_MR +#define SPI_TX_DATA AT91C_BASE_SPI->SPI_TDR +#define SPI_STATUS AT91C_BASE_SPI->SPI_SR +#define SPI_FOR_CHIPSEL_0 AT91C_BASE_SPI->SPI_CSR[0] +#define SPI_FOR_CHIPSEL_1 AT91C_BASE_SPI->SPI_CSR[1] +#define SPI_FOR_CHIPSEL_2 AT91C_BASE_SPI->SPI_CSR[2] +#define SPI_FOR_CHIPSEL_3 AT91C_BASE_SPI->SPI_CSR[3] + +#define TC1_CCR AT91C_BASE_TC1->TC_CCR +#define TC1_CMR AT91C_BASE_TC1->TC_CMR +#define TC1_CV AT91C_BASE_TC1->TC_CV +#define TC1_RA AT91C_BASE_TC1->TC_RA +#define TC1_SR AT91C_BASE_TC1->TC_SR + +#define PDC_RX_ENABLE AT91C_PDC_RXTEN +#define PDC_RX_DISABLE AT91C_PDC_RXTDIS + +#define TC_CMR_ETRGEDG_RISING AT91C_TC_ETRGEDG_RISING +#define TC_CMR_ABETRG AT91C_TC_ABETRG +#define TC_CMR_LDRA_RISING AT91C_TC_LDRA_RISING +#define TC_CMR_LDRB_RISING AT91C_TC_LDRB_RISING +#define TC_CCR_CLKEN AT91C_TC_CLKEN +#define TC_CCR_SWTRG AT91C_TC_SWTRG +#define TC_SR_LDRAS AT91C_TC_LDRAS +#define TC_CMR_ETRGEDG AT91C_TC_ETRGEDG +#define TC_CCR_CLKDIS AT91C_TC_CLKDIS + +#define ADC_CONTROL_RESET AT91C_ADC_SWRST +#define ADC_CONTROL_START AT91C_ADC_START + +#define SPI_CONTROL_ENABLE AT91C_SPI_SPIEN +#define SPI_CONTROL_LAST_TRANSFER AT91C_SPI_LASTXFER +#define SPI_CONTROL_RESET AT91C_SPI_SWRST +#define SPI_CONTROL_DISABLE AT91C_SPI_SPIDIS +#define SPI_STATUS_TX_EMPTY AT91C_SPI_TXEMPTY + +#define SSC_CONTROL_RX_ENABLE AT91C_SSC_RXEN +#define SSC_CONTROL_TX_ENABLE AT91C_SSC_TXEN +#define SSC_FRAME_MODE_MSB_FIRST AT91C_SSC_MSBF +#define SSC_CONTROL_RESET AT91C_SSC_SWRST +#define SSC_STATUS_TX_READY AT91C_SSC_TXRDY +#define SSC_STATUS_RX_READY AT91C_SSC_RXRDY + +#define FCMD_WRITE_PAGE AT91C_MC_FCMD_START_PROG +#define FLASH_PAGE_SIZE_BYTES AT91C_IFLASH_PAGE_SIZE + +#define RST_CONTROL_PROCESSOR_RESET AT91C_RSTC_PROCRST +#define RST_STATUS_TYPE_MASK AT91C_RSTC_RSTTYP +#define RST_STATUS_TYPE_WATCHDOG AT91C_RSTC_RSTTYP_WATCHDOG +#define RST_STATUS_TYPE_SOFTWARE AT91C_RSTC_RSTTYP_SOFTWARE +#define RST_STATUS_TYPE_USER AT91C_RSTC_RSTTYP_USER + +#define PMC_SYS_CLK_PROCESSOR_CLK AT91C_PMC_PCK +#define PMC_SYS_CLK_UDP_CLK AT91C_PMC_UDP +#define PMC_CLK_SELECTION_PLL_CLOCK AT91C_PMC_CSS_PLL_CLK +#define PMC_CLK_PRESCALE_DIV_4 AT91C_PMC_PRES_CLK_4 +#define PMC_SYS_CLK_PROGRAMMABLE_CLK_0 AT91C_PMC_PCK0 + +#define UDP_INTERRUPT_STATUS AT91C_BASE_UDP->UDP_ISR +#define UDP_INTERRUPT_CLEAR AT91C_BASE_UDP->UDP_ICR +#define UDP_FUNCTION_ADDR AT91C_BASE_UDP->UDP_FADDR +#define UDP_RESET_ENDPOINT AT91C_BASE_UDP->UDP_RSTEP +#define UDP_GLOBAL_STATE AT91C_BASE_UDP->UDP_GLBSTATE +#define UDP_ENDPOINT_CSR(x) AT91C_BASE_UDP->UDP_CSR[x] +#define UDP_ENDPOINT_FIFO(x) AT91C_BASE_UDP->UDP_FDR[x] + +#define UDP_CSR_CONTROL_DATA_DIR AT91C_UDP_DIR +#define UDP_CSR_ENABLE_EP AT91C_UDP_EPEDS +#define UDP_CSR_EPTYPE_CONTROL AT91C_UDP_EPTYPE_CTRL +#define UDP_CSR_EPTYPE_INTERRUPT_IN AT91C_UDP_EPTYPE_INT_IN +#define UDP_CSR_EPTYPE_INTERRUPT_OUT AT91C_UDP_EPTYPE_INT_OUT +#define UDP_CSR_FORCE_STALL AT91C_UDP_FORCESTALL +#define UDP_CSR_RX_HAVE_READ_SETUP_DATA AT91C_UDP_RXSETUP +#define UDP_CSR_RX_PACKET_RECEIVED_BANK_0 AT91C_UDP_RX_DATA_BK0 +#define UDP_CSR_RX_PACKET_RECEIVED_BANK_1 AT91C_UDP_RX_DATA_BK1 +#define UDP_CSR_STALL_SENT AT91C_UDP_STALLSENT +#define UDP_CSR_TX_PACKET AT91C_UDP_TXPKTRDY +#define UDP_CSR_TX_PACKET_ACKED AT91C_UDP_TXCOMP + +#define UDP_FUNCTION_ADDR_ENABLED AT91C_UDP_FEN +#define UDP_GLOBAL_STATE_ADDRESSED AT91C_UDP_FADDEN +#define UDP_GLOBAL_STATE_CONFIGURED AT91C_UDP_CONFG +#define UDP_INTERRUPT_END_OF_BUS_RESET AT91C_UDP_ENDBUSRES +/*************************************************************** + * end of translation between PM3 defines and AT91 defines + ***************************************************************/ + +/*************************************************************** + * the defines below this line have no AT91 equivalents and can + * be ideally moved to proxmark3.h + ***************************************************************/ +#define WDT_HIT() WDT_CONTROL = 0xa5000001 + +#define PWM_CH_MODE_PRESCALER(x) ((x)<<0) +#define PWM_CHANNEL(x) (1<<(x)) + +#define TC_CMR_TCCLKS_TIMER_CLOCK1 (0<<0) + +#define ADC_CHAN_LF 4 +#define ADC_CHAN_HF 5 +#define ADC_MODE_PRESCALE(x) ((x)<<8) +#define ADC_MODE_STARTUP_TIME(x) ((x)<<16) +#define ADC_MODE_SAMPLE_HOLD_TIME(x) ((x)<<24) +#define ADC_CHANNEL(x) (1<<(x)) +#define ADC_END_OF_CONVERSION(x) (1<<(x)) + +#define SSC_CLOCK_MODE_START(x) ((x)<<8) +#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x) ((x)<<8) +#define SSC_CLOCK_MODE_SELECT(x) ((x)<<0) +#define SSC_FRAME_MODE_BITS_IN_WORD(x) (((x)-1)<<0) + +#define MC_FLASH_COMMAND_KEY ((0x5A)<<24) +#define MC_FLASH_STATUS_READY (1<<0) +#define MC_FLASH_MODE_FLASH_WAIT_STATES(x) ((x)<<8) +#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x) ((x)<<16) +#define MC_FLASH_COMMAND_PAGEN(x) ((x)<<8) + +#define RST_CONTROL_KEY (0xA5<<24) + +#define PMC_MAIN_OSCILLATOR_ENABLE (1<<0) +#define PMC_MAIN_OSCILLATOR_STABILIZED (1<<0) +#define PMC_MAIN_OSCILLATOR_PLL_LOCK (1<<2) +#define PMC_MAIN_OSCILLATOR_MCK_READY (1<<3) + +#define PMC_PLL_DIVISOR(x) (x) +#define PMC_MAIN_OSCILLATOR_STARTUP_DELAY(x) ((x)<<8) +#define PMC_CLK_PRESCALE_DIV_2 (1<<2) +#define PMC_PLL_MULTIPLIER(x) (((x)-1)<<16) +#define PMC_PLL_COUNT_BEFORE_LOCK(x) ((x)<<8) +#define PMC_PLL_FREQUENCY_RANGE(x) ((x)<<14) +#define PMC_PLL_USB_DIVISOR(x) ((x)<<28) + +#define UDP_INTERRUPT_ENDPOINT(x) (1<<(x)) +#define UDP_CSR_BYTES_RECEIVED(x) (((x) >> 16) & 0x7ff) #endif -- 2.39.5