From da133b47a91b3127746552d8493e9919165222ab Mon Sep 17 00:00:00 2001 From: d18c7db Date: Thu, 25 Feb 2010 20:02:01 +0000 Subject: [PATCH] Delete obsolete windows files --- cockpit/0setpath.bat | 3 - cockpit/1makearm.bat | 10 --- cockpit/2makeboot.bat | 10 --- cockpit/3makewin.bat | 7 -- cockpit/4flashos.bat | 3 - cockpit/5makeall.bat | 7 -- cockpit/_checkmake.bat | 14 --- cockpit/prox.bat | 2 - doc/CHANGES.TXT | 189 ----------------------------------------- doc/README.TXT | 39 --------- 10 files changed, 284 deletions(-) delete mode 100644 cockpit/0setpath.bat delete mode 100644 cockpit/1makearm.bat delete mode 100644 cockpit/2makeboot.bat delete mode 100644 cockpit/3makewin.bat delete mode 100644 cockpit/4flashos.bat delete mode 100644 cockpit/5makeall.bat delete mode 100644 cockpit/_checkmake.bat delete mode 100644 cockpit/prox.bat delete mode 100644 doc/CHANGES.TXT delete mode 100644 doc/README.TXT diff --git a/cockpit/0setpath.bat b/cockpit/0setpath.bat deleted file mode 100644 index 791536b3..00000000 --- a/cockpit/0setpath.bat +++ /dev/null @@ -1,3 +0,0 @@ -@echo off -set PATH=C:\ProxSpace\msys\bin;C:\ProxSpace\msys\mingw\bin;C:\ProxSpace\devkitARM\bin;%PATH% -cmd.exe \ No newline at end of file diff --git a/cockpit/1makearm.bat b/cockpit/1makearm.bat deleted file mode 100644 index f4a53992..00000000 --- a/cockpit/1makearm.bat +++ /dev/null @@ -1,10 +0,0 @@ -@echo off -call _checkmake -IF %MAKE_FAILED%==1 GOTO end -cd ..\armsrc -@echo ************** -@echo *** armsrc *** -@echo ************** -make %1 -cd ..\cockpit -:end diff --git a/cockpit/2makeboot.bat b/cockpit/2makeboot.bat deleted file mode 100644 index 47057037..00000000 --- a/cockpit/2makeboot.bat +++ /dev/null @@ -1,10 +0,0 @@ -@echo off -call _checkmake -IF %MAKE_FAILED%==1 GOTO end -cd ..\bootrom -@echo *************** -@echo *** bootrom *** -@echo *************** -make %1 -cd ..\cockpit -:end diff --git a/cockpit/3makewin.bat b/cockpit/3makewin.bat deleted file mode 100644 index 0332f468..00000000 --- a/cockpit/3makewin.bat +++ /dev/null @@ -1,7 +0,0 @@ -@echo off -cd ..\client -@echo ************** -@echo *** client *** -@echo ************** -make %1 -cd ..\cockpit diff --git a/cockpit/4flashos.bat b/cockpit/4flashos.bat deleted file mode 100644 index d1b794ae..00000000 --- a/cockpit/4flashos.bat +++ /dev/null @@ -1,3 +0,0 @@ -@echo off -REM these actually do the real work -..\client\prox.exe os,fpga ..\armsrc\obj\osimage.s19 ..\armsrc\obj\fpgaimage.s19 diff --git a/cockpit/5makeall.bat b/cockpit/5makeall.bat deleted file mode 100644 index 23ee6e83..00000000 --- a/cockpit/5makeall.bat +++ /dev/null @@ -1,7 +0,0 @@ -@echo off -call _checkmake -IF %MAKE_FAILED%==1 GOTO end -call 1makearm.bat %1 -call 2makeboot.bat %1 -call 3makewin.bat %1 -:end \ No newline at end of file diff --git a/cockpit/_checkmake.bat b/cockpit/_checkmake.bat deleted file mode 100644 index fabb72e6..00000000 --- a/cockpit/_checkmake.bat +++ /dev/null @@ -1,14 +0,0 @@ -@echo off -make -C .. -s _test -IF ERRORLEVEL 1 GOTO fail -SET MAKE_FAILED=0 -GOTO end -:fail -echo ************************************************ -echo * A compatible (GNU) make was not detected * -echo * Please get an updated version of the Windows * -echo * compile environment, or install GNU make * -echo * manually * -echo ************************************************ -SET MAKE_FAILED=1 -:end diff --git a/cockpit/prox.bat b/cockpit/prox.bat deleted file mode 100644 index e0c5bf8d..00000000 --- a/cockpit/prox.bat +++ /dev/null @@ -1,2 +0,0 @@ -@echo off -call ..\client\prox %1 diff --git a/doc/CHANGES.TXT b/doc/CHANGES.TXT deleted file mode 100644 index 815d0cf1..00000000 --- a/doc/CHANGES.TXT +++ /dev/null @@ -1,189 +0,0 @@ -################ -## 2009/04/09 ## -################ -winsrc/gui.cpp - Changes to PaintGraph to create X axis labels that are snapped to a power of two (useful when analysing low freq tags - with cycle times that are a power of two). Also small changes to keep the X axis labels fixed within the graph window - as the width of the graph window is resized. -armsrc/apps.h - New defines for FPGA commands FPGA_CMD_SET_CONFREG, FPGA_CMD_SET_DIVISOR_REG -armsrc/appmain.c - -armsrc/fpga.c - FpgaWriteConfWord(data) is now a special case of FpgaSendCommand(FPGA_CMD_SET_CONFREG, data) to avoid changing every - source file containing FpgaWriteConfWord() -fpga/fpga.v - Changes to the serial conf word, now takes a 4 bit command and 12 bit data code -fpga/lo_read.v - Significant changes to lo_read, it now can be configured with a divisor value to produce a configurable drive clock - for the antenna. - Recompiled FPGA code - -################ -## 2009/04/09 ## -################ - -Initial SVN commit plus: - - Added indala demodulation algorithm - full documentation on https://www.lafargue.name/proxmark3/ - - losim should also be able to simulate an indala tag after indalademod - - offline mode for the proxmark3 CLI: if no Proxmark is detected, it will - still go on, but all commands requiring USB will fail (obviously). - A proper implementation would require only enabling offline commands - in this mode. - - -################ -## 2009/03/28 ## -################ -winsrc/command.cpp - Added two new LF commands for tag exploration : - - - askdemod: takes 2 arguments, one is the clock rate, one is the modulation - convention (high mod is 1 or high mod is zero) - - This command demodulates the stream into a binary stream into - the trace buffer (0's and 1's) - - - mandemod: manchester decoding of a bitstream: takes a binary stream from - the trace buffer (see askdemod) and attempts to do manchester decoding - to it. One argument: clock rate. Outputs the bitstream to the scrollback buffer. - - Those two helped me to validate that the unknown tag I had was indeed an EM4100 type of tag - - -################ -## 2008/12/11 ## -################ -bootrom/bootrom.c - Significant changes to bootloader. Use of Chip ID register to detect if running on a SAM7S512 then configure FLASH - waitstates as per SummoningDark's suggestion for a SAM7S512 or SAM7S256. - Deleted idle loops waiting blindly for clocks to settle and now using status registers to detect when clocks are stable. - - ************************* - * IMPORTANT INFORMATION * - ************************************************************************************************************************** - * With this boot code, the device can now only be flashed if button is held down after power on or a software reset. - * The flash procedure is this: - * Hold down button. Either plug in USB or software reset it. _While_holding_down_button_ (red and yellow LEDs are lit) you can - * issue one or more of the "prox bootrom " "prox fpga " "prox load ", be sure to hold button down for the - * entire duration of the flash process. Only release the button when flashing is complete and you want to let the board boot. - * This process may be less convenient but it's safer and avoids "unintentional" flashing of the board. - ************************************************************************************************************************** - LED boot sequence now changed, C (red) lights up when boot code jumps from flash to RAM boot code, A (yellow) lights up after - clocks have been initialized, B (green) lights up when jumping from boot code to main code, then D (red led away from the others) - lights up while code is being downloaded to FPGA, then all leds turn off and board is ready for action. - - With these changes the board now boots and is ready to use in about 3 seconds. Also since the USB bus is not initialized - twice (once during boot, then again when the main code runs) unless the button is held down at boot, this seems to avoid - the double USB connect and "USB device not recognized" when device is connected to the USB bus or software reset. - -################ -## 2008/12/06 ## -################ -armsrc/fpga.c - Implemented function SetupSpi() to initialize the Serial Peripheral Interface (SPI) in preparation to adding an LCD to the board. - Changed FpgaWriteConfWord() to use the SPI communication now instead of bit banging the serial data to the FPGA. - -fpga/fpga.v - The FPGA config word serializer required non standard SPI communication (ie for shifting in a 8 bit word, it required a 9th clock - cycle with NCS high to load the word from the shift register to the conf register). This was OK for manually bitbanging it but not - suitable for using SPI comms. The serializer was fixed to load the conf word from the shift register on a NCS lo-hi transition and - not require additional clocking. - -armsrc/fpgaimg.c - Recompiled FPGA code after changes above. - -armsrc/LCD.c - LCD driver for PCF8833 based LCDs like those found on Nokia models 2600,2650,3100,3120,5140,6030,6100,6610,7210,7250 maybe - others. These color LCDs have a resolution of 132x132 and a serial interface. They are very cheap like even down to $2/pc - This LCD driver is a straight rip of that found at http://www.sparkfun.com/datasheets/LCD/Jimbo-Nokia-SAM7-Example.zip with - very small changes, mainly to integrate it and make it compile with our codebase. Also comented out the circle subroutines - to keep the code to integer math only. - -armsrc/fonts.c - Font definition for LCD driver - -armsrc/appmain.c - Fixed a small bug in CmdHIDdemodFSK (added case 4) which prevented reading some tags. When a logic 0 is immediately followed - by the start of the next transmisson (special pattern) a pattern of 4 bit duration lengths is created. - -################ -## 2008/11/27 ## -################ -armsrc/appmain.c - Implemented an HID tag FSK demodulator (CmdHIDdemodFSK) to obtain the tag ID code from the raw sampled waveform. - Implemented CmdHIDsimTAG which takes a 44bit HID tag ID as a hex number then creates the waveform and simulates the tag - -winsrc/command.cpp - Added command "hidfskdemod" that calls CmdHIDdemodFSK, the ARM FSK demodulator for HID tags. - -include/usb-cmd.h - New defines CMD_HID_DEMOD_FSK and CMD_HID_SIM_TAG - -2008/11/25 -common/iso14443_crc.c - Moved CRC calculation code into this file as it's common to both ARM and Windows side. This file is now included as needed. - -################ -## 2008/11/21 ## -################ -armsrc/Makefile - Changes to split up the compilation of the ARM and produce separate S files for the FPGA code and the ARM code. - -armsrc/appmain.c - Replaced some of the hex value params in FpgaWriteConfWord with more explanatory defines. - Changes to the Tune command as it assumes wrong HF capacitor value (130pF) and produces wrong voltage readings. - Combined some of the integer arithmetic statements to improve accuracy slightly, since the voltage divider ratio is not an integer. - Voltage divider resistor network is 10M/240k = ratio of 41.6666 - - Originally the calculation was rounding the ratio down to 41 - 3300 (mV) * 41 * sample_value / 1024 - New calculation without rounding error is - 3300 (mV) * 41.66666 * sample_value / 1024 => 137500 * sample_value / 1024 - - New define BUTTON_PRESS() returns status of button - -armsrc/fpga.c - The current board can only take a X2S30 as there is no larger FPGA in PQFP100 package and - the smaller X2S15 FPGA can't fit the current code. The X2S30 FPGA config is fixed at 336,768 bits - The FPGA code base address and length is hard coded to occupy FLASH region 0x2000 - 0xC470. - -armsrc/ldscript-fpga - New file to place the FPGA code at FLASH address 0x2000 - -bootrom/Makefile - Slight changes, commented out the generation of byteswapped S file, the other S files are generated in the same section of the makefile now. - -bootrom/bootrom.c - Changed some thumb code with a one line ARM code which is clearer and more explicit. Processor runs in ARM mode at reset anyway. - Changed jump to RAM address, used to jump to 0x2000 (now FPGA area), now jumps to 0x10000. - -bootrom/flash-reset.s - Changed name of CMain to CopyBootToRAM. Streamlined reset code, fixed up stack pointer initialization. - -bootrom/fromflash.c - Removed the whole section of initializing clocks, this is redundant as it's being done once we jump to boot code in RAM - All fromflash.c does now is copy the boot code to ram and jumps to it. - -bootrom/ram-reset.s - Fixed up stack pointer initialization that caused crash when using "loread" - -include/at91sam7s128.h - New defines for debug register, lets you identify what processor flavour the code runs on, RAM and FLASH sizes, etc. - -include/proxmark3.h - New useful defines for relay and button - -winsrc/Makefile - Added new define /D_CRT_SECURE_NO_WARNINGS to elliminate a _whole bunch_ of bogus compilation warnings - -winsrc/command.cpp - Changed CmdLosamples to take a numeric argument (number of samples x4 to retrieve from buffer) - New command Quit to exit the program from the GUI command prompt. - -winsrc/gui.cpp - Fixup compilation warnings. - -winsrc/prox.cpp - Tidy up printing to stdout, flashing progress now updates on the same line instead of scrolling up. - New command line parameter to load FPGA image to FLASH. diff --git a/doc/README.TXT b/doc/README.TXT deleted file mode 100644 index f3b49c77..00000000 --- a/doc/README.TXT +++ /dev/null @@ -1,39 +0,0 @@ -This is a bare minimum compile environment for the proxmark3 sources. - -CONTENTS - -This bundle contains the ARM cross compiler in devkitARM and a _tiny_ subset -of the Visual C++ 2008 Express Edition in devkitWIN which is the bare minimum -required for compilation of this current source. - -If you plan on further source code development you are strongly encouraged -to download the full Visual C++ 2008 available for free download from -http://www.microsoft.com/express/download/ - -CAVEATS - -There is no provision in this environment for compiling the FPGA source. To -do that you need to download the free (registration required) ISE WebPack -from Xilinx at http://www.xilinx.com/ise/logic_design_prod/webpack.htm -Be warned, the pack is huge, 2Gb download and >4Gb installed. - -USAGE - -First of all run the .msi file in devkitWIN\vcredist_x86 to install the VC++ -redistributables, without these, nmake, cl and link won't run. - -Get a command prompts in the cockpit directory and pretty much run the batch -files in the order they appear: - -0setpath.bat - sets the environment vars for the compile environment -1makearm.bat - compiles the files in armsrc, output files in armsrc\obj -2makeboot.bat - compiles the files in bootrom, output files in bootrom\obj -3makewin.bat - compiles the files in winsrc, output files in winsrc\obj -4flashos.bat - attempts to upload the OS image to the proxmark3 board - -ACKNOWLEDGMENTS - -Thanks to J Westhues for the original proxmark, Roel and the proxmark.org -community. This pack may contain F/OSS or free but copyrighted software -from Xilinx, Microsoft and others. All trademarks are the property of -their respective owners. All rights reserved. -- 2.39.5