dos2unix *.vhd

[raggedstone] / dhwk / source / config_10h.vhd

-- J.STELZNER
-- INFORMATIK-3 LABOR
-- 23.08.2006
-- File: CONFIG_10H.VHD

library IEEE;
use IEEE.std_logic_1164.all;

entity CONFIG_10H is
	port
	(
	PCI_CLOCK			:in		std_logic;
	PCI_RSTn			:in		std_logic;
	AD_REG				:in		std_logic_vector(31 downto 0);
	CBE_REGn			:in		std_logic_vector( 3 downto 0);
	CONF_WR_10H		:in		std_logic;
	CONF_DATA_10H	:out	std_logic_vector(31 downto 0)
	);
end entity CONFIG_10H;

architecture CONFIG_10H_DESIGN of CONFIG_10H is

	signal		CONF_BAS_ADDR_REG	:std_logic_vector(31 downto  0);

begin

--*******************************************************************
--***** PCI Configuration Space Header "BASE ADDRESS REGISTER" ******
--*******************************************************************

	CONF_BAS_ADDR_REG(1 downto 0) <= "01"	;-- Base Address Register for "I/O"
	CONF_BAS_ADDR_REG(3 downto 2)	<= "00"	;-- IO Bereich = 16 BYTE

	process (PCI_CLOCK,PCI_RSTn) 
	begin

--	if PCI_RSTn = '0' then	CONF_BAS_ADDR_REG(31 downto 2) <= (others =>'0');
		if PCI_RSTn = '0' then	CONF_BAS_ADDR_REG(31 downto 4) <= (others =>'0');
								
		elsif (PCI_CLOCK'event and PCI_CLOCK = '1') then

			if			CONF_WR_10H	 = '1'and CBE_REGn(3) = '0' then 

							CONF_BAS_ADDR_REG(31 downto 24) <= AD_REG(31 downto 24);

				else	CONF_BAS_ADDR_REG(31 downto 24) <= CONF_BAS_ADDR_REG(31 downto 24);
			end if;

			if			CONF_WR_10H	 = '1'and CBE_REGn(2) = '0' then 

							CONF_BAS_ADDR_REG(23 downto 16) <= AD_REG(23 downto 16);

				else	CONF_BAS_ADDR_REG(23 downto 16) <= CONF_BAS_ADDR_REG(23 downto 16);
			end if;

			if			CONF_WR_10H	 = '1'and CBE_REGn(1) = '0' then 

							CONF_BAS_ADDR_REG(15 downto  8) <= AD_REG(15 downto  8);

				else	CONF_BAS_ADDR_REG(15 downto  8) <= CONF_BAS_ADDR_REG(15 downto  8);
			end if;

--			if			CONF_WR_10H	 = '1'and CBE_REGn(0) = '0' then 
--
--							CONF_BAS_ADDR_REG( 7 downto  2) <= AD_REG( 7 downto  2);
--
--				else	CONF_BAS_ADDR_REG( 7 downto  2) <= CONF_BAS_ADDR_REG( 7 downto  2);
--			end if;

			if			CONF_WR_10H	 = '1'and CBE_REGn(0) = '0' then 

							CONF_BAS_ADDR_REG( 7 downto  4) <= AD_REG( 7 downto  4);

				else	CONF_BAS_ADDR_REG( 7 downto  4) <= CONF_BAS_ADDR_REG( 7 downto  4);
			end if;


		end if;

	end process;

	CONF_DATA_10H	<= CONF_BAS_ADDR_REG;

end architecture CONFIG_10H_DESIGN;