move, ident

[raggedstone] / dhwk / source / config_3Ch.vhd

diff --git a/dhwk/source/config_3Ch.vhd b/dhwk/source/config_3Ch.vhd
index 1cc7f8077a3a34ac966c59e656475f3ac2ba2cf2..fd71b59e5084176c5ad61ded4214d9a6ac448ba9 100644 (file)
--- a/dhwk/source/config_3Ch.vhd
+++ b/dhwk/source/config_3Ch.vhd
@@ -1,59 +1,59 @@
--- J.STELZNER\r
--- INFORMATIK-3 LABOR\r
--- 23.08.2006\r
--- File: CONFIG_3CH.VHD\r
-\r
-library IEEE;\r
-use IEEE.std_logic_1164.all;\r
-\r
-entity CONFIG_3CH is\r
-        port (\r
-                PCI_CLOCK      :in std_logic;\r
-                PCI_RSTn       :in std_logic;\r
-                AD_REG         :in std_logic_vector (31 downto 0);\r
-                CBE_REGn       :in std_logic_vector ( 3 downto 0);\r
-                CONF_WR_3CH    :in std_logic;\r
-                CONF_DATA_3CH  :out std_logic_vector (31 downto 0)\r
-        );\r
-end entity CONFIG_3CH;\r
-\r
-architecture CONFIG_3CH_DESIGN of CONFIG_3CH is\r
-\r
--- PCI Configuration Space Header Addr : HEX 3C --\r
-\r
-       signal CONF_MAX_LAT :std_logic_vector (31 downto 24);\r
-       signal CONF_MIN_GNT :std_logic_vector (23 downto 16);  \r
-       signal CONF_INT_PIN :std_logic_vector (15 downto  8);\r
-       signal CONF_INT_LINE :std_logic_vector ( 7 downto  0);  \r
-\r
-       constant cmd_conf_write :std_logic_vector(3 downto 0) := "1011";\r
-begin \r
-\r
---*******************************************************************\r
---*********** PCI Configuration Space Header "INTERRUPT" ************\r
---*******************************************************************\r
-\r
-               CONF_MAX_LAT    <= X"00";\r
-               CONF_MIN_GNT    <= X"00";\r
---     CONF_INT_PIN    <= X"00";                               -- Interrupt -\r
-               CONF_INT_PIN    <= X"01";                               -- Interrupt A\r
---     CONF_INT_PIN    <= X"02";                               -- Interrupt B\r
---     CONF_INT_PIN    <= X"03";                               -- Interrupt C \r
---     CONF_INT_PIN    <= X"04";                               -- Interrupt D\r
---     CONF_INT_PIN    <= X"05 - FF0"; -- Reserviert\r
-\r
-process (PCI_CLOCK,PCI_RSTn) \r
-begin\r
-        if PCI_RSTn = '0' then\r
-                CONF_INT_LINE <= (others => '0');\r
-\r
-        elsif (PCI_CLOCK'event and PCI_CLOCK = '1') then\r
-                if CONF_WR_3CH = '1'and CBE_REGn(0) = '0' then \r
-                        CONF_INT_LINE(7 downto 0) <= AD_REG(7 downto 0);\r
-                end if;\r
-        end if;\r
-end process;\r
-\r
-CONF_DATA_3CH  <= CONF_MAX_LAT & CONF_MIN_GNT & CONF_INT_PIN & CONF_INT_LINE;\r
-\r
-end architecture CONFIG_3CH_DESIGN;\r
+-- J.STELZNER
+-- INFORMATIK-3 LABOR
+-- 23.08.2006
+-- File: CONFIG_3CH.VHD
+
+library IEEE;
+use IEEE.std_logic_1164.all;
+
+entity CONFIG_3CH is
+        port (
+                PCI_CLOCK      :in std_logic;
+                PCI_RSTn       :in std_logic;
+                AD_REG         :in std_logic_vector (31 downto 0);
+                CBE_REGn       :in std_logic_vector ( 3 downto 0);
+                CONF_WR_3CH    :in std_logic;
+                CONF_DATA_3CH  :out std_logic_vector (31 downto 0)
+        );
+end entity CONFIG_3CH;
+
+architecture CONFIG_3CH_DESIGN of CONFIG_3CH is
+
+-- PCI Configuration Space Header Addr : HEX 3C --
+
+       signal CONF_MAX_LAT :std_logic_vector (31 downto 24);
+       signal CONF_MIN_GNT :std_logic_vector (23 downto 16);  
+       signal CONF_INT_PIN :std_logic_vector (15 downto  8);
+       signal CONF_INT_LINE :std_logic_vector ( 7 downto  0);  
+
+       constant cmd_conf_write :std_logic_vector(3 downto 0) := "1011";
+begin 
+
+--*******************************************************************
+--*********** PCI Configuration Space Header "INTERRUPT" ************
+--*******************************************************************
+
+               CONF_MAX_LAT    <= X"00";
+               CONF_MIN_GNT    <= X"00";
+--     CONF_INT_PIN    <= X"00";                               -- Interrupt -
+               CONF_INT_PIN    <= X"01";                               -- Interrupt A
+--     CONF_INT_PIN    <= X"02";                               -- Interrupt B
+--     CONF_INT_PIN    <= X"03";                               -- Interrupt C 
+--     CONF_INT_PIN    <= X"04";                               -- Interrupt D
+--     CONF_INT_PIN    <= X"05 - FF0"; -- Reserviert
+
+process (PCI_CLOCK,PCI_RSTn) 
+begin
+        if PCI_RSTn = '0' then
+                CONF_INT_LINE <= (others => '0');
+
+        elsif (PCI_CLOCK'event and PCI_CLOCK = '1') then
+                if CONF_WR_3CH = '1'and CBE_REGn(0) = '0' then 
+                        CONF_INT_LINE(7 downto 0) <= AD_REG(7 downto 0);
+                end if;
+        end if;
+end process;
+
+CONF_DATA_3CH  <= CONF_MAX_LAT & CONF_MIN_GNT & CONF_INT_PIN & CONF_INT_LINE;
+
+end architecture CONFIG_3CH_DESIGN;