X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/raggedstone/blobdiff_plain/29e2611580bbb559863091364a79e8fa3187c471..9b35d8b67650412c1662750ebe73d2957bb2bc31:/dhwk/source/config_wr_0.vhd diff --git a/dhwk/source/config_wr_0.vhd b/dhwk/source/config_wr_0.vhd index 4c7b96c..2df596d 100644 --- a/dhwk/source/config_wr_0.vhd +++ b/dhwk/source/config_wr_0.vhd @@ -1,139 +1,139 @@ --- J.STELZNER --- INFORMATIK-3 LABOR --- 23.08.2006 --- File: CONFIG_WR_0.VHD - -library IEEE; -use IEEE.std_logic_1164.all; - -entity CONFIG_WR_0 is - port - ( - ADDR_REG :in std_logic_vector(31 downto 0); - CF_WR_COM :in std_logic; - IRDY_REGn :in std_logic; - TRDYn :in std_logic; - CONF_WR_04H :out std_logic; - CONF_WR_10H :out std_logic; - CONF_WR_3CH :out std_logic ---CONF_WR_40H :out std_logic - ); -end entity CONFIG_WR_0; - -architecture CONFIG_WR_0_DESIGN of CONFIG_WR_0 is - --- --- --- --- --- --- PCI Configuration Space Header --- --- \ Bit --- \ ---Address |31 24|23 16|15 8|7 0| ------------------------------------------------------------------ ---00 |Device ID |Vendor ID | ---04 |Status |Command | ---08 |Class Code |Revision ID | ---0C |BIST |Header Type |Latency T. |Cache L.S. | ---10-24 |Base Address Register | ---28 |Cardbus CIS Pointer | ---2C |Subsystem ID |Subsystem Vendor ID | ---30 |Expansion ROM Base Address | ---34 |Reserved | ---38 |Reserved | ---3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line | ---40-FF | | ------------------------------------------------------------------ - - ---PCI Bus Commands ---C/BE[3..0] Command Type --------------------------------------- --- 0000 Interrupt Acknowledge --- 0001 Special Cycle --- 0010 I/O Read --- 0011 I/O Write --- 0100 Reserved --- 0101 Reserved --- 0110 Memory Read --- 0111 Memory Write --- --- 1000 Reserved --- 1001 Reserved --- 1010 Configuration Read --- 1011 Configuration Write --- 1100 Memory Read Multiple --- 1101 Dual Address Cycle --- 1110 Memory Read Line --- 1111 Memory Write and Invalidate - - ---PCI Byte Enable ---C/BE[3..0] gueltige Datenbits -------------------------------- --- 0000 AD 31..0 --- 1000 AD 23..0 --- 1100 AD 15..0 --- 1110 AD 7..0 - - constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000"; - constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001"; - constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010"; - constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011"; - constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100"; - constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101"; - constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110"; - constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111"; - constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000"; - constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001"; - constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010"; - constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011"; - constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100"; - constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101"; - constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110"; - constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111"; - - signal CONFIG_ADDR :std_logic_vector(7 downto 0); - signal CONFIG_WRITE :std_logic_vector(3 downto 0); - - -begin - ---******************************************************************* ---******************* PCI Write Configuration Address *************** ---******************************************************************* - - CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0); - - - process (CF_WR_COM,IRDY_REGn,TRDYn,CONFIG_ADDR) - begin - - if CF_WR_COM = '1' and IRDY_REGn = '0' and TRDYn = '0' then - - if CONFIG_ADDR = X"04" then - CONFIG_WRITE <= "0001"; - - elsif CONFIG_ADDR = X"10" then - CONFIG_WRITE <= "0010"; - - elsif CONFIG_ADDR = X"3C" then - CONFIG_WRITE <= "0100"; - --- elsif CONFIG_ADDR = X"40" then CONFIG_WRITE <= "1000"; - else - CONFIG_WRITE <= "0000"; - end if; - else - CONFIG_WRITE <= "0000"; - end if; - end process; - - CONF_WR_04H <= CONFIG_WRITE(0); - CONF_WR_10H <= CONFIG_WRITE(1); - CONF_WR_3CH <= CONFIG_WRITE(2); ---CONF_WR_40H <= CONFIG_WRITE(3); - -end architecture CONFIG_WR_0_DESIGN; +-- J.STELZNER +-- INFORMATIK-3 LABOR +-- 23.08.2006 +-- File: CONFIG_WR_0.VHD + +library IEEE; +use IEEE.std_logic_1164.all; + +entity CONFIG_WR_0 is + port + ( + ADDR_REG :in std_logic_vector(31 downto 0); + CF_WR_COM :in std_logic; + IRDY_REGn :in std_logic; + TRDYn :in std_logic; + CONF_WR_04H :out std_logic; + CONF_WR_10H :out std_logic; + CONF_WR_3CH :out std_logic +--CONF_WR_40H :out std_logic + ); +end entity CONFIG_WR_0; + +architecture CONFIG_WR_0_DESIGN of CONFIG_WR_0 is + +-- +-- +-- +-- +-- +-- PCI Configuration Space Header +-- +-- \ Bit +-- \ +--Address |31 24|23 16|15 8|7 0| +----------------------------------------------------------------- +--00 |Device ID |Vendor ID | +--04 |Status |Command | +--08 |Class Code |Revision ID | +--0C |BIST |Header Type |Latency T. |Cache L.S. | +--10-24 |Base Address Register | +--28 |Cardbus CIS Pointer | +--2C |Subsystem ID |Subsystem Vendor ID | +--30 |Expansion ROM Base Address | +--34 |Reserved | +--38 |Reserved | +--3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line | +--40-FF | | +----------------------------------------------------------------- + + +--PCI Bus Commands +--C/BE[3..0] Command Type +-------------------------------------- +-- 0000 Interrupt Acknowledge +-- 0001 Special Cycle +-- 0010 I/O Read +-- 0011 I/O Write +-- 0100 Reserved +-- 0101 Reserved +-- 0110 Memory Read +-- 0111 Memory Write +-- +-- 1000 Reserved +-- 1001 Reserved +-- 1010 Configuration Read +-- 1011 Configuration Write +-- 1100 Memory Read Multiple +-- 1101 Dual Address Cycle +-- 1110 Memory Read Line +-- 1111 Memory Write and Invalidate + + +--PCI Byte Enable +--C/BE[3..0] gueltige Datenbits +------------------------------- +-- 0000 AD 31..0 +-- 1000 AD 23..0 +-- 1100 AD 15..0 +-- 1110 AD 7..0 + + constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000"; + constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001"; + constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010"; + constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011"; + constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100"; + constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101"; + constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110"; + constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111"; + constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000"; + constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001"; + constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010"; + constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011"; + constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100"; + constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101"; + constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110"; + constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111"; + + signal CONFIG_ADDR :std_logic_vector(7 downto 0); + signal CONFIG_WRITE :std_logic_vector(3 downto 0); + + +begin + +--******************************************************************* +--******************* PCI Write Configuration Address *************** +--******************************************************************* + + CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0); + + + process (CF_WR_COM,IRDY_REGn,TRDYn,CONFIG_ADDR) + begin + + if CF_WR_COM = '1' and IRDY_REGn = '0' and TRDYn = '0' then + + if CONFIG_ADDR = X"04" then + CONFIG_WRITE <= "0001"; + + elsif CONFIG_ADDR = X"10" then + CONFIG_WRITE <= "0010"; + + elsif CONFIG_ADDR = X"3C" then + CONFIG_WRITE <= "0100"; + +-- elsif CONFIG_ADDR = X"40" then CONFIG_WRITE <= "1000"; + else + CONFIG_WRITE <= "0000"; + end if; + else + CONFIG_WRITE <= "0000"; + end if; + end process; + + CONF_WR_04H <= CONFIG_WRITE(0); + CONF_WR_10H <= CONFIG_WRITE(1); + CONF_WR_3CH <= CONFIG_WRITE(2); +--CONF_WR_40H <= CONFIG_WRITE(3); + +end architecture CONFIG_WR_0_DESIGN;