]>
Commit | Line | Data |
---|---|---|
190cff13 MG |
1 | #!/usr/bin/perl -w |
2 | ||
3 | use LWP::UserAgent; | |
4 | use XML::Simple; | |
5 | use Data::Dumper; | |
6 | use MIME::Base64; | |
7 | use Digest::MD5 qw(md5); | |
8 | ||
9 | my $ua = LWP::UserAgent->new; | |
10 | my $sid; | |
bd1a6723 | 11 | my $host; |
f4d84b07 | 12 | my $poweronms=200; |
e270bbeb | 13 | my $poweroffms=5000; |
5a8d9e2e | 14 | my $verbose = 0; |
190cff13 | 15 | |
874e09fb MG |
16 | my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY |
17 | IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP | |
18 | ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS | |
19 | ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS | |
20 | ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS | |
21 | ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD | |
22 | AMR_DISABLE_PCI AMR_ENABLE_ISCSI_TIMEOUT AMR_ENABLED AMR_HOST_INTERFACE | |
23 | AMR_SERVER_LIST AMR_USB_FDD_CBI_UFI_TRANSPORT AMR_USB_R2T_TIMEOUT_MSEC | |
24 | AVR_4BIT_ACTION AVR_4BIT_SAMPLE_TIME AVR_ARCHITECTURE AVR_CHIP_TYPE | |
25 | AVR_CLIENT_LANGUAGE AVR_DISABLE_SVR_MOUSE_ON_SESSION_START | |
26 | AVR_KB_VERSION AVR_MAX_SESSION_COUNT AVR_MOUSE_ACCELERATION | |
27 | AVR_MOUSE_MAX_STEP_SIZE AVR_NUMB_MOUSE_PACKETS | |
28 | AVR_PCI_PATTERN_HANDS_OFF_ENABLED AVR_PREF_KB_STICKY_KEY_MODE_ON | |
29 | AVR_PREF_KB_TYPING_MODE_ON AVR_PREF_KB_WARN_UNID_EV | |
30 | AVR_REGISTERS_BASE_ADDR AVR_RESET_PAUSE AVR_SCREEN_REFRESH | |
31 | AVR_SUPPORTED_CHIP AVR_TILE_TIMEOUT AVR_VIDEO_MEM_BASE_ADDR BAUDRATE | |
32 | BAUDRATE_MODEM BAUDRATE_PPP BMC_SUPPORTS_GRACEFULL | |
33 | BMC_TIMESYNC_INTERVAL CARD_NAME CONSOLE_IPMI_MOUSE_BYTE_TIME | |
34 | CONSOLE_KEYBOARD_ACCESS_MODE CONSOLE_MOUSE_ACCESS_MODE | |
35 | CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN | |
36 | CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL | |
37 | DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME | |
38 | DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI | |
39 | ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT | |
40 | ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME | |
41 | ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100 | |
42 | ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER | |
43 | ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE | |
44 | ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY | |
45 | EXPROM_ENTRY EXPROM_EXIT_DELAY_SEC EXPROM_F3_DELAY_SEC | |
46 | EXPROM_INT13_COMPATIBILITY EXPROM_SETUP_BANNER FIRMWARE_REVISION | |
47 | FP_ACDC FP_AMR FP_AVR_ASR FP_AVR_GRAPHIC_CONSOLE FP_AVR_TEXT_CONSOLE | |
48 | FP_AVRMANCONF_4BIT_SAMPLE FP_AVRMANCONF_ACCESS_MODES FP_AVRMANCONF_CHIP | |
49 | FP_AVRMANCONF_MOUSE_ACCELERATION FP_AVRMANCONF_MOUSE_TYPE | |
50 | FP_AVRMANCONF_RESET_PAUSE FP_AVRMANCONF_SCREEN_REFRESH FP_BATTERY | |
51 | FP_BOARDRESET_BUTTON FP_COMREDIRECT FP_F3_PPP FP_I2C FP_ICMB FP_INSTR | |
52 | FP_INTERNAL_LAN FP_KEY_CONSOLE FP_LAN_SPEED | |
53 | FP_LAST_BOARD_POWER_WARNING_ENABLED FP_NO_BLADE_PANEL | |
54 | FP_NO_CARDCONF_PANEL FP_NO_DIAG_PANEL FP_NO_DSAUTHCONF_PANEL | |
55 | FP_NO_MANAGE_PANEL FP_NO_MEMORY_PANEL FP_NO_SENSOR_PANEL | |
56 | FP_NO_SERVERCONF_PANEL FP_NO_SSL_PANEL FP_NO_SYSLOG_PANEL | |
57 | FP_NO_USERCONF_PANEL FP_PAGING_EMAIL FP_PAGING_SERIAL FP_PAGING_SNMP | |
58 | FP_PCI_CONFIG FP_PPP FP_PROP_BAUDRATE_REQBOOT FP_PROP_PPP_INIT_REQBOOT | |
59 | FP_PROP_PS_REQBOOT FP_PROP_TERM_DIRECT_CONNECT_REQBOOT FP_REMOTE_BOOT | |
60 | FP_REMOTE_DISK FP_REMOTE_POWER FP_SAC_CONSOLE FP_SEL FP_SENSOR_HISTORY | |
61 | FP_SEQ_SEL FP_SERVER_POWER FP_SERVER_REBOOT FP_SERVER_RESET | |
62 | FP_SERVER_SHUTDOWN FP_SMM FP_SSL FP_STATUS_DIAG_PANEL | |
63 | FP_STATUS_MEMORY_PANEL FP_STATUS_PCI_CONFIG FP_STATUS_SAC_CONSOLE | |
64 | FP_SYSTEM_LAN FP_TEXT_ASR FP_TEXT_CONSOLE FP_TUI FP_VERSION FP_VGA_ASR | |
65 | FP_VGA_CONSOLE FP_VT100_CONSOLE GATEWAY GATEWAY_MAC | |
66 | GRATUITOUS_ARP_INTERVAL HELP_LOCATION HIST0_SAMPLE_TIME HIST0_SENSOR_ID | |
67 | HIST1_SAMPLE_TIME HIST1_SENSOR_ID HIST2_SAMPLE_TIME HIST2_SENSOR_ID | |
68 | HIST3_SAMPLE_TIME HIST3_SENSOR_ID HTTP_PORT_NUM HTTP_SSL_PORT_NUM | |
69 | I2C_ADDR_8BIT_CHASSIS_BMC I2C_ADDR_8BIT_MY_BMC I2C_ADDR_8BIT_THIS_CARD | |
70 | INFOTXT_BPROP_ACCESS INFOTXT_DB_ACCESS IP_ADDRESS IP_ADDRESS_SOURCE | |
71 | IPMB_RETRY_TIMEOUT IPMB_SEQ_NUM_TIMEOUT IPMB_TX_RETRIES | |
72 | IPMI_COUNTRY_SELECT IPV4_HEADER_PARAMETERS ISCSI_DEVICE_VENDOR | |
73 | ISCSI_PRODUCT_EMUL_BD ISCSI_PRODUCT_EMUL_CD ISCSI_PRODUCT_EMUL_FD | |
74 | LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY LAST_IP_ADDRESS | |
75 | LAST_NETMASK LOCATION MAC_ADDRESS MODEM_CONNECT MODEM_CONNECT2 | |
76 | MODEM_SEPARATOR NETMASK PAGE_RETRIES PAGE_RETRY_DELAY_SEC POST_ERRCODE | |
77 | POST_PROP PPP_AVAILABLE PPP_INIT PPP_IP_ADDR PPP_NETMASK PPP_PORT | |
78 | PPP_STATUS PPP_STAY_ALIVE_SECS PPP_WELCOME PPP2_BAUDRATE PPP2_INIT | |
79 | PPP2_IP_ADDR PPP2_NETMASK PPP2_PORT PPP2_STAY_ALIVE_SECS PRODUCT | |
80 | PRODUCT_ABBR PS_ASR PS_DISK PS_FAN PS_HARDWARE PS_MEMORY PS_NETWORK | |
81 | PS_OTHER PS_POST PS_RMC PS_SECURITY PS_SYS_POWER PS_SYS_STATUS | |
82 | PS_TEMPERATURE PS2_ADAPTER_POWER_UP_MODE PS2_FW_UPDATE_CMD | |
83 | PS2_FW_UPDATE_IMG_NAME PS2_FW_UPDATE_STATUS RMC_DS_GROUP SAC_PORT | |
84 | SERVER_CODEPAGE SERVER_HARD_RESET_PULSE_MS SERVER_HARD_RESET_VIA_IPMI | |
85 | SERVER_ID SERVER_IP SERVER_KEYBOARD SERVER_KEYBOARD_LANGUAGES_LIST | |
86 | SERVER_MEMORY SERVER_NAME SERVER_POWER_CHANGE_VIA_IPMI | |
87 | SERVER_POWER_OFF_MODE SERVER_POWER_OFF_PULSE_MS SERVER_POWER_ON_MODE | |
88 | SERVER_POWER_ON_PULSE_MS SERVER_TIMEZONE SERVER_URL | |
89 | SESSION_MANAGER_SESSION_TIMEOUT SI_DEF_POLL_INTERVAL_MS | |
90 | SI_DEF_POLL_OFFSET_MS SMTP_RESP_TIME_SEC SMTP_RETRIES | |
91 | SMTP_RETRY_DELAY_SEC SMTP_REVERSE_PATH SMTP_SERVER SNMP_AGENT_ENABLED | |
92 | SNMP_COMMUNITY SNMP_ENTERPRISE_ID SNMP_SERVER SNMP_SERVER_1 | |
93 | SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4 SNMP_SERVER_5 SNMP_SERVER_6 | |
94 | SNMP_SERVER_7 SNMP_SERVER_MAC SNMP_SYSOID SNMP_TRAP_MASK | |
95 | SNMP_TRAP_VERSION SSL_40_OR_128_ENCRYPTION SSL_CAPABLE_FIRMWARE | |
96 | SSL_ENABLE_ALOG SSL_ENABLE_ALOG_FALLBACK SSL_ENABLE_CLIENT_CERT | |
97 | SSL_ENABLE_HTTP SSL_ENABLE_HTTPS SSL_ENABLE_NOTIFY | |
98 | SSL_NOTIFICATION_TIME TELNET_ENABLE TELNET_PORT_NUM | |
99 | TERMINAL_DIRECT_CONNECT TERMINAL_ENCODING TEXT_CONSOLE_TIMEOUT | |
100 | TFTP_ADDR_FIRMWARE TFTP_ADDR_REBOOT TFTP_FIRMWARE_FILE TFTP_REBOOT_FILE | |
101 | TXT_REMOTE_CONSOLE_COLOR_MAP TXT_REMOTE_CONSOLE_FREQ | |
102 | USB_DEVICE_SETTINGS USE_SERVER_IP_ADDRESS USER_TIMEOUT VENDOR | |
103 | RMC_AUTODETECT RMC_FUNCTIONS RMC_MODULES AGENT_VERSION BIOS_VER | |
104 | BOARD_MFT BOARD_MODEL BOARD_PART_NUM BOARD_SERIAL BOARD_VER CAB_MFT | |
105 | CAB_MODEL CAB_PROD_NUM CAB_PROD_VER CAB_SERIAL CHA_MODEL | |
106 | CSV_ConfAlarmMailFrom CSV_ConfAlarmMailMessage CSV_ConfAlarmMailSubject | |
107 | CSV_ConfAlarmMailType CSV_ConfAlarmMailUserInfo0 | |
108 | CSV_ConfAlarmMailUserInfo1 PER_USER_PAGING RMC_SEL_FILTER | |
109 | SERVER_AD_NAME SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4 | |
110 | SERVER_CONTACT SERVER_DESCRIPTION SERVER_IP_ADDRESS SERVER_IP_ADDRESS2 | |
111 | SERVER_IP_ADDRESS3 SERVER_IP_ADDRESS4 SERVER_IP_DHCP SERVER_IP_DHCP2 | |
112 | SERVER_IP_DHCP3 SERVER_IP_DHCP4 SERVER_IP_GATEWAY SERVER_IP_GATEWAY2 | |
113 | SERVER_IP_GATEWAY3 SERVER_IP_GATEWAY4 SERVER_IP_NETMASK | |
114 | SERVER_IP_NETMASK2 SERVER_IP_NETMASK3 SERVER_IP_NETMASK4 | |
115 | SERVER_LOCATION SERVER_MAC_ADDRESS SERVER_MAC_ADDRESS2 | |
116 | SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4 SERVER_MAX_LAN_ADAPTER | |
117 | SERVER_OS SERVER_OS_VENDOR); | |
118 | ||
190cff13 MG |
119 | sub _crc16 { |
120 | my $str = shift; | |
121 | my $crc = 0; | |
122 | for my $k (0..length($str)-1) { | |
123 | $crc ^= ord(substr($str, $k, 1)) << 8; | |
124 | for (0..7) { | |
125 | $crc = (($crc & 0x8000) == 32768 ? ($crc<<1) ^ 0x1021 : $crc<<1); | |
126 | } | |
127 | } | |
128 | $crc = $crc & 0xFFFF; | |
129 | return $crc; | |
130 | } | |
131 | ||
132 | sub _hash { | |
133 | my ($password, $challenge) = @_; | |
134 | my @challenge_bytes = unpack 'c16', decode_base64($challenge); | |
135 | my @pwd_hash = unpack 'c16', md5($password); | |
136 | my @xor_bytes; | |
137 | for my $i (0..15) { | |
138 | $xor_bytes[$i] = $challenge_bytes[$i] ^ $pwd_hash[$i]; | |
139 | }; | |
140 | my $hash = md5(pack 'c16', @xor_bytes); | |
141 | my $crc = _crc16($hash); | |
142 | $hash .= chr($crc & 0xff) . chr($crc >> 8 & 0xff); | |
143 | return encode_base64($hash, ""); | |
144 | } | |
145 | ||
146 | sub _req { | |
147 | my $xml = shift; | |
148 | $request = HTTP::Request->new(POST => "http://${host}/cgi/bin"); | |
149 | $request->header(Cookie => "sid=$sid"); | |
150 | $request->content_type('application/x-www-form-urlencoded'); | |
151 | $request->content($xml); | |
152 | $response = $ua->request($request); | |
153 | die("Error in request: " . $response->status_line . "\n") unless ($response->is_success); | |
154 | XMLin($response->content); | |
155 | } | |
156 | ||
157 | sub _getprop { | |
158 | my $property = shift; | |
159 | ||
160 | my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>'; | |
161 | my $resp = _req($reqstr); | |
162 | ||
163 | if ($resp->{RESP}->{RC} ne '0x0') { | |
874e09fb | 164 | $resp->{RESP}->{RC}; |
190cff13 | 165 | } else { |
874e09fb | 166 | $resp; |
190cff13 MG |
167 | } |
168 | } | |
169 | ||
170 | sub logout { | |
5a8d9e2e | 171 | print "Logout\n" if ($verbose); |
190cff13 MG |
172 | my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout"); |
173 | $request->header(Cookie => "sid=$sid"); | |
174 | my $response = $ua->request($request); | |
175 | die("While trying to logout: " . $response->status_line . "\n") unless ($response->is_success); | |
176 | ||
177 | my $xmlin = XMLin($response->decoded_content); | |
178 | die "Error logging out: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0'); | |
179 | } | |
180 | ||
181 | sub setprop { | |
182 | my $property = shift; | |
183 | my $value = shift; | |
184 | ||
874e09fb | 185 | my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL}; |
190cff13 MG |
186 | |
187 | if ($value eq $oldval) { | |
5a8d9e2e | 188 | print "${property} is already ${value}\n" if ($verbose); |
190cff13 MG |
189 | return; |
190 | } | |
191 | ||
192 | my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ></RMCSEQ>'; | |
193 | my $res = _req($reqstr); | |
194 | ||
195 | if ($res->{RESP}->{RC} ne '0x0') { | |
196 | print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n"; | |
197 | } else { | |
5a8d9e2e | 198 | print "${property}: ${oldval} -> ${value}\n" if ($verbose); |
190cff13 MG |
199 | } |
200 | } | |
201 | ||
202 | sub serveraction { | |
203 | my $action = shift; | |
204 | ||
f4d84b07 MG |
205 | my $pmode = 2; |
206 | ||
207 | setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE"); | |
208 | setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE"); | |
209 | #PM Mode | |
210 | setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode)); | |
211 | setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode)); | |
212 | ||
5a8d9e2e | 213 | print "${action}...\n" if ($verbose); |
190cff13 MG |
214 | my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>'; |
215 | my $res = _req($reqstr); | |
216 | ||
217 | if ($res->{RESP}->{RC} ne '0x0') { | |
218 | print "FAILED:".$res->{RESP}->{RC}."\n"; | |
219 | } | |
220 | } | |
221 | ||
f4d84b07 | 222 | sub powerup { |
5a8d9e2e | 223 | print "powerup\n" if ($verbose); |
f4d84b07 MG |
224 | setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms)); |
225 | setprop("SERVER_POWER_OFF_PULSE_MS", "0x0"); | |
226 | serveraction("powercycle"); | |
227 | } | |
228 | ||
229 | sub powerdown { | |
5a8d9e2e | 230 | print "powerdown\n" if ($verbose); |
f4d84b07 MG |
231 | setprop("SERVER_POWER_ON_PULSE_MS", "0x0"); |
232 | setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms)); | |
233 | serveraction("powercycle"); | |
234 | } | |
235 | ||
236 | sub powercycle { | |
5a8d9e2e | 237 | print "powercycle\n" if ($verbose); |
f4d84b07 MG |
238 | setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms)); |
239 | setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms)); | |
240 | serveraction("powercycle"); | |
241 | } | |
242 | ||
190cff13 MG |
243 | sub showprop { |
244 | my $property = shift; | |
245 | ||
874e09fb MG |
246 | my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP}; |
247 | ||
248 | print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n"; | |
249 | } | |
250 | ||
251 | sub board_properties { | |
252 | my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>'; | |
253 | my $resp = _req($reqstr); | |
254 | ||
255 | print " * Board Properties:\n"; | |
256 | foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) { | |
257 | print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n"; | |
258 | } | |
259 | } | |
260 | ||
bd1a6723 MG |
261 | sub show_boarddesc { |
262 | my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ></RMCSEQ>'; | |
263 | my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL}; | |
264 | my $boarddesc = decode_base64($boarddesc64); | |
265 | my @board = split(//, $boarddesc); | |
266 | foreach my $byte (@board) { | |
267 | printf ("0x%02x ", ord($byte)); | |
268 | } | |
269 | print "\n"; | |
270 | } | |
271 | ||
874e09fb MG |
272 | sub show_all_vars { |
273 | foreach my $fwvar (@fw_vars) { | |
274 | showprop($fwvar); | |
275 | } | |
190cff13 MG |
276 | } |
277 | ||
99b39951 MG |
278 | sub syslog_debug { |
279 | my $destination_ip = shift; | |
280 | my $bcast = shift; | |
281 | ||
282 | $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>'; | |
283 | $res = _req($reqstr); | |
284 | if ($res->{RESP}->{RC} ne '0x0') { | |
285 | print "FAILED:".$res->{RESP}->{RC}."\n"; | |
286 | return; | |
287 | } | |
288 | ||
39dccf16 | 289 | $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ></RMCSEQ>'; |
99b39951 MG |
290 | $res = _req($reqstr); |
291 | if ($res->{RESP}->{RC} ne '0x0') { | |
292 | print "FAILED:".$res->{RESP}->{RC}."\n"; | |
293 | return; | |
294 | } | |
295 | ||
296 | print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n"; | |
297 | } | |
298 | ||
bd1a6723 MG |
299 | sub login { |
300 | my $user = shift; | |
301 | my $pass = shift; | |
302 | ||
303 | my $response = $ua->get("http://${host}/cgi/challenge"); | |
304 | die $response->status_line if (!($response->is_success)); | |
305 | ||
306 | my $xmlin = XMLin($response->decoded_content); | |
307 | die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0'); | |
308 | my $challenge = $xmlin->{CHALLENGE}; | |
5a8d9e2e | 309 | print "Challenge: ${challenge}\n" if ($verbose); |
bd1a6723 MG |
310 | |
311 | $sid = $response->headers->header('Set-Cookie'); | |
312 | die "No SessionID!" if (!defined($sid)); | |
313 | chomp($sid); | |
314 | $sid =~ s/.*sid=(.*);.*/$1/; | |
5a8d9e2e | 315 | print "SID: ${sid}\n" if ($verbose); |
bd1a6723 MG |
316 | |
317 | my $login_hash = _hash($pass, $challenge); | |
5a8d9e2e | 318 | print "Hash: ${login_hash}\n" if ($verbose); |
bd1a6723 MG |
319 | |
320 | my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}"); | |
321 | $request->header(Cookie => "sid=$sid"); | |
322 | $response = $ua->request($request); | |
323 | die("While trying to login: " . $response->status_line . "\n") unless ($response->is_success); | |
324 | ||
325 | $xmlin = XMLin($response->decoded_content); | |
326 | die "Error logging in: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0'); | |
327 | ||
328 | $sid; | |
190cff13 | 329 | } |
bd1a6723 MG |
330 | |
331 | open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!"); | |
332 | my %Config = (); | |
333 | my @sections = (); | |
334 | while(<INIFILE>) { | |
335 | chomp; | |
336 | ||
337 | next if (m/^#/); | |
338 | ||
339 | if (m/^\s*\[(.*)\]\s*$/) { | |
340 | push @sections, $1; | |
341 | next; | |
342 | } | |
343 | ||
344 | if (@sections) { | |
345 | if (m/^\s*(.+)\s*=\s*(.*)\s*$/) { | |
346 | ${$Config{$sections[$#sections]}}{$1} = $2; | |
347 | } | |
348 | } | |
349 | } | |
350 | close(INIFILE); | |
351 | ||
5a8d9e2e MG |
352 | my $valid_arg = 0; |
353 | my $powup = 0; | |
354 | my $powdown = 0; | |
355 | my $powcyc = 0; | |
356 | my $reset = 0; | |
357 | my @sprop = (); | |
358 | my @gprop = (); | |
359 | my $show = 0; | |
360 | my $enable_debug = ""; | |
361 | my $save = ""; | |
362 | my $load = ""; | |
363 | my $hostalias; | |
364 | ||
365 | while (defined($ARGV[0])) { | |
366 | SWITCH: for ($ARGV[0]) { | |
367 | /^-v$/ && do { | |
368 | $verbose = 1; | |
369 | shift @ARGV; | |
370 | last SWITCH; | |
371 | }; | |
372 | /^-g$/ && do { | |
373 | shift @ARGV; | |
374 | push @gprop, shift @ARGV; | |
375 | last SWITCH; | |
376 | }; | |
377 | /^-s$/ && do { | |
378 | shift @ARGV; | |
379 | push @sprop, shift @ARGV; | |
380 | last SWITCH; | |
381 | }; | |
382 | /^-u$/ && do { | |
383 | $powup = 1; | |
384 | shift @ARGV; | |
385 | last SWITCH; | |
386 | }; | |
387 | /^-d$/ && do { | |
388 | $powdown = 1; | |
389 | shift @ARGV; | |
390 | last SWITCH; | |
391 | }; | |
392 | /^-c$/ && do { | |
393 | $powcyc = 1; | |
394 | shift @ARGV; | |
395 | last SWITCH; | |
396 | }; | |
397 | /^-r$/ && do { | |
398 | $reset = 1; | |
399 | shift @ARGV; | |
400 | last SWITCH; | |
401 | }; | |
402 | /^-l$/ && do { | |
403 | shift @ARGV; | |
404 | $enable_debug = shift @ARGV; | |
405 | last SWITCH; | |
406 | }; | |
407 | /^-x$/ && do { | |
408 | $show = 1; | |
409 | shift @ARGV; | |
410 | last SWITCH; | |
411 | }; | |
412 | /^-save$/ && do { | |
413 | shift @ARGV; | |
414 | $save = shift @ARGV; | |
415 | last SWITCH; | |
416 | }; | |
417 | /^-load$/ && do { | |
418 | shift @ARGV; | |
419 | $load = shift @ARGV; | |
420 | last SWITCH; | |
421 | }; | |
422 | ||
423 | if (defined($ARGV[0])) { | |
424 | $hostalias = $ARGV[0]; | |
425 | shift(@ARGV); | |
426 | $valid_arg = 1; | |
427 | } | |
428 | ||
429 | while ( defined($ARGV[0]) ) { $valid_arg = 0; shift(@ARGV); } | |
430 | } | |
431 | } | |
bd1a6723 | 432 | |
5a8d9e2e MG |
433 | if (!defined(${$Config{$hostalias}}{'host'})) { |
434 | $valid_arg = 0; | |
435 | } | |
bd1a6723 | 436 | |
5a8d9e2e MG |
437 | if (!$valid_arg) { |
438 | print STDERR "Usage: $0 options card-alias\n"; | |
439 | print STDERR "Options:\n"; | |
440 | print STDERR "\t-g property\tget property value\n"; | |
441 | print STDERR "\t-s property=val\tset property value\n"; | |
442 | print STDERR "\t-u\t\tpowerup\n"; | |
443 | print STDERR "\t-d\t\tpowerdown\n"; | |
444 | print STDERR "\t-c\t\tpowercycle\n"; | |
445 | print STDERR "\t-r\t\treset\n"; | |
446 | print STDERR "\t-x\t\tshow all properties, variables and settings\n"; | |
447 | print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n"; | |
448 | print STDERR "\t-v\t\tverbose\n"; | |
449 | print STDERR "\t-save file\tsave configuration to 'file'\n"; | |
450 | print STDERR "\t-load file\tload configuration from 'file'\n"; | |
451 | print STDERR "\n"; | |
452 | print STDERR "card-alias\tone of: "; | |
453 | foreach my $alias (@sections) { | |
454 | print STDERR "\"${alias}\" "; | |
455 | } | |
456 | print STDERR "(see ~/.rsbs2rc)\n"; | |
457 | exit(1); | |
458 | } | |
459 | ||
460 | $host = ${$Config{$hostalias}}{"host"}; | |
461 | $poweronms = ${$Config{$hostalias}}{"poweronms"} if (defined(${$Config{$hostalias}}{"poweronms"})); | |
462 | $poweroffms = ${$Config{$hostalias}}{"poweroffms"} if (defined(${$Config{$hostalias}}{"poweroffms"})); | |
463 | ||
464 | $sid = login(${$Config{$hostalias}}{"user"}, ${$Config{$hostalias}}{"pass"}); | |
465 | ||
466 | if ($show) { | |
467 | show_boarddesc(); | |
468 | board_properties(); | |
469 | show_all_vars(); | |
470 | } | |
190cff13 | 471 | |
5a8d9e2e MG |
472 | if (@gprop) { |
473 | foreach my $p (@gprop) { | |
474 | showprop($p); | |
475 | } | |
476 | } | |
874e09fb | 477 | |
5a8d9e2e MG |
478 | if (@sprop) { |
479 | foreach my $p (@sprop) { | |
480 | (my $pr, $v) = split(/=/,$p,2); | |
481 | setprop($pr, $v); | |
482 | } | |
483 | } | |
874e09fb | 484 | |
5a8d9e2e MG |
485 | if ($save ne '') { |
486 | print "save: implement me!\n"; | |
487 | } | |
190cff13 | 488 | |
5a8d9e2e MG |
489 | if ($load ne '') { |
490 | print "load: implement me!\n"; | |
491 | } | |
99b39951 | 492 | |
5a8d9e2e MG |
493 | if ($enable_debug ne '') { |
494 | syslog_debug($enable_debug, "TRUE"); | |
495 | } | |
f4d84b07 | 496 | |
5a8d9e2e MG |
497 | if ($reset) { |
498 | print "hardreset\n" if ($verbose); | |
499 | serveraction("hardreset"); | |
500 | } | |
190cff13 | 501 | |
5a8d9e2e MG |
502 | if ($powup) { |
503 | powerup(); | |
504 | } | |
190cff13 | 505 | |
5a8d9e2e MG |
506 | if ($powdown) { |
507 | powerdown(); | |
508 | } | |
190cff13 | 509 | |
5a8d9e2e MG |
510 | if ($powcyc) { |
511 | powercycle(); | |
512 | } | |
190cff13 MG |
513 | |
514 | logout(); |