my $ua = LWP::UserAgent->new;
my $sid;
my $host;
+my $poweronms=200;
+my $poweroffms=5000;
+my $verbose = 0;
my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
- ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+ ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
- DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+ DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
- ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+ ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
my $resp = _req($reqstr);
+
+ print "get: ${property}\n" if ($verbose);
if ($resp->{RESP}->{RC} ne '0x0') {
$resp->{RESP}->{RC};
}
sub logout {
- print "Logout\n";
+ print "Logout\n" if ($verbose);
my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout");
$request->header(Cookie => "sid=$sid");
my $response = $ua->request($request);
my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};
if ($value eq $oldval) {
- print "${property} is already ${value}\n";
+ print "${property} is already ${value}\n" if ($verbose);
return;
}
sub serveraction {
my $action = shift;
- print "${action}...\n";
+ my $pmode = 2;
+
+ setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
+ setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
+ #PM Mode
+ setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
+ setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
+
+ print "${action}...\n" if ($verbose);
my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>';
my $res = _req($reqstr);
}
}
+sub powerup {
+ print "powerup\n" if ($verbose);
+ setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
+ setprop("SERVER_POWER_OFF_PULSE_MS", "0x0");
+ serveraction("powercycle");
+}
+
+sub powerdown {
+ print "powerdown\n" if ($verbose);
+ setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
+ setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
+ serveraction("powercycle");
+}
+
+sub powercycle {
+ print "powercycle\n" if ($verbose);
+ setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
+ setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
+ serveraction("powercycle");
+}
+
sub showprop {
my $property = shift;
my $xmlin = XMLin($response->decoded_content);
die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
my $challenge = $xmlin->{CHALLENGE};
- print "Challenge: ${challenge}\n";
+ print "Challenge: ${challenge}\n" if ($verbose);
$sid = $response->headers->header('Set-Cookie');
die "No SessionID!" if (!defined($sid));
chomp($sid);
$sid =~ s/.*sid=(.*);.*/$1/;
- print "SID: ${sid}\n";
+ print "SID: ${sid}\n" if ($verbose);
my $login_hash = _hash($pass, $challenge);
- print "Hash: ${login_hash}\n";
+ print "Hash: ${login_hash}\n" if ($verbose);
my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}");
$request->header(Cookie => "sid=$sid");
}
close(INIFILE);
-$host = ${$Config{$sections[0]}}{"host"};
+my $valid_arg = 0;
+my $powup = 0;
+my $powdown = 0;
+my $powcyc = 0;
+my $reset = 0;
+my @sprop = ();
+my @gprop = ();
+my $show = 0;
+my $enable_debug = "";
+my $save = "";
+my $load = "";
+my $hostalias;
+
+while (defined($ARGV[0])) {
+ SWITCH: for ($ARGV[0]) {
+ /^-v$/ && do {
+ $verbose = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
+ /^-g$/ && do {
+ shift @ARGV;
+ push @gprop, shift @ARGV;
+ last SWITCH;
+ };
+ /^-s$/ && do {
+ shift @ARGV;
+ push @sprop, shift @ARGV;
+ last SWITCH;
+ };
+ /^-u$/ && do {
+ $powup = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
+ /^-d$/ && do {
+ $powdown = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
+ /^-c$/ && do {
+ $powcyc = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
+ /^-r$/ && do {
+ $reset = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
+ /^-l$/ && do {
+ shift @ARGV;
+ $enable_debug = shift @ARGV;
+ last SWITCH;
+ };
+ /^-x$/ && do {
+ $show = 1;
+ shift @ARGV;
+ last SWITCH;
+ };
+ /^-save$/ && do {
+ shift @ARGV;
+ $save = shift @ARGV;
+ last SWITCH;
+ };
+ /^-load$/ && do {
+ shift @ARGV;
+ $load = shift @ARGV;
+ last SWITCH;
+ };
+
+ if (defined($ARGV[0])) {
+ $hostalias = $ARGV[0];
+ shift(@ARGV);
+ $valid_arg = 1;
+ }
-$sid = login(${$Config{$sections[0]}}{"user"}, ${$Config{$sections[0]}}{"pass"});
+ while ( defined($ARGV[0]) ) { $valid_arg = 0; shift(@ARGV); }
+ }
+}
-show_boarddesc();
+if ($valid_arg && (!defined(${$Config{$hostalias}}{'host'}))) {
+ $valid_arg = 0;
+}
-#showprop("FP_REMOTE_POWER");
-#showprop("FP_REMOTE_BOOT");
-#showprop("SERVER_HARD_RESET_VIA_IPMI");
-#showprop("SERVER_HARD_RESET_PULSE_MS");
-#showprop("SERVER_POWER_CHANGE_VIA_IPMI");
-#showprop("SERVER_POWER_ON_MODE");
-#showprop("SERVER_POWER_ON_PULSE_MS");
-#showprop("SERVER_POWER_OFF_MODE");
-#showprop("SERVER_POWER_OFF_PULSE_MS");
+if (!$valid_arg) {
+ print STDERR "Usage: $0 options card-alias\n";
+ print STDERR "Options:\n";
+ print STDERR "\t-g property\tget property value\n";
+ print STDERR "\t-s property=val\tset property value\n";
+ print STDERR "\t-u\t\tpowerup\n";
+ print STDERR "\t-d\t\tpowerdown\n";
+ print STDERR "\t-c\t\tpowercycle\n";
+ print STDERR "\t-r\t\treset\n";
+ print STDERR "\t-x\t\tshow all properties, variables and settings\n";
+ print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
+ print STDERR "\t-v\t\tverbose\n";
+ print STDERR "\t-save file\tsave configuration to 'file'\n";
+ print STDERR "\t-load file\tload configuration from 'file'\n";
+ print STDERR "\n";
+ print STDERR "card-alias\tone of: ";
+ foreach my $alias (@sections) {
+ print STDERR "\"${alias}\" ";
+ }
+ print STDERR "(see ~/.rsbs2rc)\n";
+ exit(1);
+}
-board_properties();
+$host = ${$Config{$hostalias}}{"host"};
+$poweronms = ${$Config{$hostalias}}{"poweronms"} if (defined(${$Config{$hostalias}}{"poweronms"}));
+$poweroffms = ${$Config{$hostalias}}{"poweroffms"} if (defined(${$Config{$hostalias}}{"poweroffms"}));
-#show_all_vars();
+$sid = login(${$Config{$hostalias}}{"user"}, ${$Config{$hostalias}}{"pass"});
-syslog_debug("255.255.255.255", "TRUE");
+if ($show) {
+ show_boarddesc();
+ board_properties();
+ show_all_vars();
+}
-#server_power_on modes: (com/agilent/rmc/mgui/panels/PowerMgmtConf.class)
-#0: l_pmconf_option_disabled
-#1: l_pmconf_option_atx
-#2: l_pmconf_option_relay
-#default: disabled
+if (@gprop) {
+ foreach my $p (@gprop) {
+ showprop($p);
+ }
+}
+
+if (@sprop) {
+ foreach my $p (@sprop) {
+ (my $pr, $v) = split(/=/,$p,2);
+ setprop($pr, $v);
+ }
+}
+
+if ($save ne '') {
+ my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+ GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+ ENABLE_DHCP HELP_LOCATION HELP_LOCATION PPP_PORT PPP2_INIT PPP2_PORT
+ SERVER_ID SNMP_SERVER_1 SNMP_SERVER_2 SNMP_SERVER_3 SNMP_SERVER_4
+ SNMP_SERVER_5 SNMP_SERVER_6 SNMP_SERVER_7 SERVER_AD_NAME
+ SERVER_AD_NAME2 SERVER_AD_NAME3 SERVER_AD_NAME4 SERVER_MAC_ADDRESS
+ SERVER_MAC_ADDRESS2 SERVER_MAC_ADDRESS3 SERVER_MAC_ADDRESS4
+ MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+ LAST_IP_ADDRESS LAST_NETMASK);
+
+ open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+ foreach my $ts (@fw_vars) {
+ next if (grep(/^${ts}$/, @dontsave));
+
+ my $phash = _getprop($ts)->{RESP}->{PROPLIST}->{PROP};
+ next if ($phash->{PERMS} ne 'RW');
+
+ print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+ }
+ close(SAVEFILE);
+}
+
+if ($load ne '') {
+ open (LOADFILE, "<${load}") || die "Error opening load-file: $!\n";
+ while(<LOADFILE>) {
+ chomp;
+ (my $p, my $v) = split(/=/, $_);
+ setprop($p, $v);
+ }
+ close(LOADFILE);
+ print "Settings loaded, resetting board...\n";
+ my $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardreset"></REQ></RMCSEQ>';
+ _req($reqstr);
+ exit(0);
+}
+
+if ($enable_debug ne '') {
+ syslog_debug($enable_debug, "TRUE");
+}
-my $pmode = 2;
+if ($reset) {
+ print "hardreset\n" if ($verbose);
+ serveraction("hardreset");
+}
-setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
-setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
-#Power Mgmt. Pane
-setprop("FP_REMOTE_POWER", "TRUE");
-#PM Mode
-setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
-setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
-#Hack: Abuse powercycloe for powerup and down...
-#setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
+if ($powup) {
+ powerup();
+}
-#$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropset"><BPROP NAME="BOARD_DESCRIPTION"><VAL>'.$boarddesc_new.'</VAL></BPROP></REQ></RMCSEQ>';
-#print $reqstr."\n";
-#print Dumper(_req($reqstr));
+if ($powdown) {
+ powerdown();
+}
-serveraction("hardreset");
-serveraction("powerup");
-serveraction("powerdown");
-serveraction("powercycle");
+if ($powcyc) {
+ powercycle();
+}
logout();
projects / rsbs2 / blobdiff