X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/rsbs2/blobdiff_plain/e7ae5b6c2e684ce38ac527a7c6a0423322ff2669..762f3898849f6975286d7d0511f9e340cc2eb073:/rsbs2.pl?ds=inline

diff --git a/rsbs2.pl b/rsbs2.pl
index ee813f8..4d09c1b 100755
--- a/rsbs2.pl
+++ b/rsbs2.pl
@@ -15,7 +15,7 @@ my $verbose = 0;
 
 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
-	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
 	ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
 	ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
 	ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
@@ -35,10 +35,10 @@ my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
 	CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
 	DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
-	DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+	DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
 	ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
 	ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
-	ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+	ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
 	ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
 	ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
 	ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
@@ -148,16 +148,29 @@ sub _req {
 	$request = HTTP::Request->new(POST => "http://${host}/cgi/bin");
 	$request->header(Cookie => "sid=$sid");
 	$request->content_type('application/x-www-form-urlencoded');
-	$request->content($xml);
+	$request->content('<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ>'.$xml.'</RMCSEQ>');
 	$response = $ua->request($request);
 	die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
-	XMLin($response->content);
+	XMLin($response->content, SuppressEmpty => '');
+}
+
+sub _cmd {
+	my $cmd = shift;
+
+	my $reqstr='<REQ CMD="'.$cmd.'"></REQ>';
+	my $res = _req($reqstr);
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "${cmd} failed: ".$res->{RESP}->{RC}."\n";
+		undef;
+	}
+
+	$res->{RESP};
 }
 
 sub _getprop {
 	my $property = shift;
 
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ>';
 	my $resp = _req($reqstr);
 
 	print "get: ${property}\n" if ($verbose);
@@ -191,13 +204,15 @@ sub setprop {
 		return;
 	}
 	
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ>';
 	my $res = _req($reqstr);
 
 	if ($res->{RESP}->{RC} ne '0x0') {
 		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+		undef;
 	} else {
-		print "${property}: ${oldval} -> ${value}\n";
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
 	}
 }
 
@@ -213,7 +228,7 @@ sub serveraction {
 	setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
 
 	print "${action}...\n" if ($verbose);
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ>';
 	my $res = _req($reqstr);
 
 	if ($res->{RESP}->{RC} ne '0x0') {
@@ -251,7 +266,7 @@ sub showprop {
 }
 
 sub board_properties {
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ>';
 	my $resp = _req($reqstr);
 
 	print " * Board Properties:\n";
@@ -261,7 +276,7 @@ sub board_properties {
 }
 
 sub show_boarddesc {
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ>';
 	my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL};
 	my $boarddesc = decode_base64($boarddesc64);
 	my @board = split(//, $boarddesc);
@@ -277,18 +292,83 @@ sub show_all_vars {
 	}
 }
 
+sub usrlist {
+	my $res = _cmd("usrlist");
+	my @users = ();
+
+	if ($res->{RC} ne '0x0') {
+		print "FAILED:".$res->{RC}."\n";
+		();
+	} else {
+		if (ref($res->{USRLIST}->{USER}) eq 'ARRAY') {
+			foreach my $usr (@{$res->{USRLIST}->{USER}}) {
+				push @users, $usr->{NAME};
+			}
+		} else {
+			push @users, $res->{USRLIST}->{USER}->{NAME};
+		}
+	}
+	@users;
+}
+
+sub getusrprops {
+	my $usr = shift;
+
+	my $reqstr = '<REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ>';
+	my $res = _req($reqstr)->{RESP}->{USER}->{PROP};
+
+	$res;
+}
+
+sub usradd {
+	my $usr = shift;
+
+	my $reqstr='<REQ CMD="usradd"><USER NAME="'.$usr.'"/></REQ>';
+	my $res = _req($reqstr);
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "FAILED:".$res->{RESP}->{RC}."\n";
+	}
+}
+
+sub setusrprop {
+	my $usr = shift;
+	my $property = shift;
+	my $value = shift;
+
+	my $reqstr='<REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ>';
+	my $res = _req($reqstr);
+
+	my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};
+
+	if ($value eq $oldval) {
+		print "${property} is already ${value}\n" if ($verbose);
+		return;
+	}
+	
+	$reqstr='<REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ>';
+	$res = _req($reqstr);
+
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+		undef;
+	} else {
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
+	}
+}
+
 sub syslog_debug {
 	my $destination_ip = shift;
 	my $bcast = shift;
 
-	$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
-	$res = _req($reqstr);
+	my $reqstr='<REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ>';
+	my $res = _req($reqstr);
 	if ($res->{RESP}->{RC} ne '0x0') {
 		print "FAILED:".$res->{RESP}->{RC}."\n";
 		return;
 	}
 
-	$reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ></RMCSEQ>';
+	$reqstr='<REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ>';
 	$res = _req($reqstr);
 	if ($res->{RESP}->{RC} ne '0x0') {
 		print "FAILED:".$res->{RESP}->{RC}."\n";
@@ -298,6 +378,70 @@ sub syslog_debug {
 	print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
 }
 
+sub sensors {
+	my $slist= _cmd("sensorlist");
+	my %sens = ();
+
+	if ($slist->{RC} ne '0x0') {
+		print "Error getting sensorlist: ".$slist->{RC}."\n";
+		return;
+	}
+
+	foreach my $s (@{$slist->{SENSORLIST}->{SENSOR}}) {
+	}
+}
+
+sub status {
+	my $boardstatus = _cmd("boardstatus")->{STATUS};
+	my $fw = _cmd("boardfwstatus");
+	my $boardfwstatus = $fw->{STATUS};
+	my $boardfwprogress = $fw->{PROGRESS};
+	$bs = hex($boardstatus);
+
+	print "Server Power:\t\t" . (($bs & 0x01) ? "ON" : "OFF") . "\n";
+	print "External PSU:\t\t" . (($bs & 0x02) ? "ON" : "OFF") . "\n";
+	print "Battery:\t\t";
+	if ($bs & 0x04) {
+		if ($bs & 0x08) {
+			print "LOW\n";
+		} elsif ($bs & 0x800) {
+			print "ON\n";
+		} else {
+			print "UNKNOWN\n";
+		}
+	} else {
+		print "OFF\n";
+	}
+	print "Standby Power:\t\t" . (($bs & 0x08) ? "ON" : "OFF") . "\n";
+	print "LAN:\t\t\t" . (($bs & 0x10) ? "CONNECTED" : "NC") . "\n";
+	print "I2C:\t\t\t" . (($bs & 0x20) ? "CONNECTED" : "NC") . "\n";
+	print "SMM:\t\t\t" . (($bs & 0x40) ? "CONNECTED" : "NC") . "\n";
+	print "Instrumentation:\t" . (($bs & 0x200) ? "CONNECTED" : "NC") . "\n";
+	print "ICMB:\t\t\t" . (($bs & 0x400) ? "CONNECTED" : "NC") . "\n";
+	print "PPP:\t\t\t" . (($bs & 0x10000) ? "ON" : "OFF") . "\n";
+	print "Paging:\t\t\t" . (($bs & 0x20000) ? "ON" : "OFF") . "\n";
+	print "COM redirection:\t" . (($bs & 0x100000) ? "ON" : "OFF") . "\n";
+	print "UART redirect:\t\t" . (($bs & 0x200000) ? "ON" : "OFF") . "\n";
+	print "UART redirect pending:\t" . (($bs & 0x400000) ? "TRUE" : "FALSE") . "\n";
+	print "Hex BoardStatus:\t${boardstatus}\n";
+	my $fws = hex ($boardfwstatus);
+	print "FW status:\t\t";
+	if ($fws == 3 || $fws == 32771) {
+		print "WAITING";
+	} else {
+		print "DONE";
+	}
+	print " (${boardfwstatus})\n";
+	if (($fws & 0x8080) || ($fws & 0x80)) {
+		printf("FW error:\t\t0x%02x\n", ($fws & 0xff));
+	}
+	if ($fws != 0) {
+		print "FW upgrade progress:\t${boardfwprogress}\n";
+	}
+	print "\nSensors:\n";
+	sensors();
+}
+
 sub login {
 	my $user = shift;
 	my $pass = shift;
@@ -330,38 +474,49 @@ sub login {
 	$sid;
 }
 
-open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!");
-my %Config = ();
-my @sections = ();
-while(<INIFILE>) {
-	chomp;
+sub read_inifile {
+	my $filename = shift;
 
-	next if (m/^#/);
-
-	if (m/^\s*\[(.*)\]\s*$/) {
-		push @sections, $1;
-		next;
-	}
-
-	if (@sections) {
-		if (m/^\s*(.+)\s*=\s*(.*)\s*$/) {
-			${$Config{$sections[$#sections]}}{$1} = $2;
+	open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
+	my %Ini = ();
+	my @sections = ();
+	while(<INIFILE>) {
+		chomp;
+	
+		next if (m/^#/);
+	
+		if (m/^\s*\[(.*)\]\s*$/) {
+			push @sections, $1;
+			next;
+		}
+	
+		if (@sections) {
+			if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
+				${$Ini{$sections[$#sections]}}{$1} = $2;
+			}
 		}
 	}
+	close(INIFILE);
+
+	%Ini;
 }
-close(INIFILE);
+
+my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
 
 my $valid_arg = 0;
 my $powup = 0;
 my $powdown = 0;
 my $powcyc = 0;
 my $reset = 0;
+my $resetrsbs2 = 0;
 my @sprop = ();
 my @gprop = ();
+my @xmlsend = ();
 my $show = 0;
 my $enable_debug = "";
 my $save = "";
 my $load = "";
+my $showstat = 0;
 my $hostalias;
 
 while (defined($ARGV[0])) {
@@ -401,6 +556,11 @@ while (defined($ARGV[0])) {
 				shift @ARGV;
 				last SWITCH;
 			};
+		/^-R$/ && do {
+				$resetrsbs2 = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
 		/^-l$/ && do {
 				shift @ARGV;
 				$enable_debug = shift @ARGV;
@@ -411,6 +571,16 @@ while (defined($ARGV[0])) {
 				shift @ARGV;
 				last SWITCH;
 			};
+		/^-X$/ && do {
+				shift @ARGV;
+				push @xmlsend, shift @ARGV;
+				last SWITCH;
+			};
+		/^-b$/ && do {
+				$showstat = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
 		/^-save$/ && do {
 				shift @ARGV;
 				$save = shift @ARGV;
@@ -432,7 +602,7 @@ while (defined($ARGV[0])) {
 	}
 }
 
-if ($valid_arg && (!defined(${$Config{$hostalias}}{'host'}))) {
+if ($valid_arg && (!defined($Config{$hostalias}))) {
 	$valid_arg = 0;
 }
 
@@ -445,14 +615,17 @@ if (!$valid_arg) {
 	print STDERR "\t-d\t\tpowerdown\n";
 	print STDERR "\t-c\t\tpowercycle\n";
 	print STDERR "\t-r\t\treset\n";
+	print STDERR "\t-R\t\treset RSB S2 borad\n";
 	print STDERR "\t-x\t\tshow all properties, variables and settings\n";
 	print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
+	print STDERR "\t-b\t\tshow board/server status\n";
+	print STDERR "\t-X\t\tsend raw XML string (start with REQ tag)\n";
 	print STDERR "\t-v\t\tverbose\n";
 	print STDERR "\t-save file\tsave configuration to 'file'\n";
 	print STDERR "\t-load file\tload configuration from 'file'\n";
 	print STDERR "\n";
 	print STDERR "card-alias\tone of: ";
-	foreach my $alias (@sections) {
+	foreach my $alias (keys(%Config)) {
 		print STDERR "\"${alias}\" ";
 	}
 	print STDERR "(see ~/.rsbs2rc)\n";
@@ -480,15 +653,28 @@ if (@gprop) {
 if (@sprop) {
 	foreach my $p (@sprop) {
 		(my $pr, $v) = split(/=/,$p,2);
-		setprop($pr, $v);
+		my $oldval = setprop($pr, $v);
+		if (defined($oldval)) {
+			print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
+		}
+	}
+}
+
+if (@xmlsend) {
+	foreach my $x (@xmlsend) {
+		print Dumper(_req($x));
 	}
 }
 
 if ($save ne '') {
-	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
-	        IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP);
+	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+	GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+	ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+	LAST_IP_ADDRESS LAST_NETMASK);
 
 	open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+	print SAVEFILE "[global]\n";
+	print STDERR "saving" if (!$verbose);
 	foreach my $ts (@fw_vars) {
 		next if (grep(/^${ts}$/, @dontsave));
 
@@ -496,18 +682,46 @@ if ($save ne '') {
 		next if ($phash->{PERMS} ne 'RW');
 		
 		print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+		print STDERR "." if (!$verbose);
+	}
+	foreach my $usr (usrlist()) {
+		print SAVEFILE "\n[${usr}]\n";
+		foreach my $up (@{getusrprops($usr)}) {
+			next if ($up->{PERMS} ne 'RW');
+
+			print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
+		}
+		print STDERR "." if (!$verbose);
 	}
 	close(SAVEFILE);
+	print STDERR "done\n" if (!$verbose);
 }
 
 if ($load ne '') {
-	open (LOADFILE, "<${load}") || die "Error opening load-file: $!\n";
-	while(<LOADFILE>) {
-		chomp;
-		(my $p, my $v) = split(/=/, $_);
-		setprop($p, $v);
+	my %loadfile = read_inifile("${load}");
+	print STDERR "loading" if (!$verbose);
+
+	foreach my $p (keys(%{$loadfile{'global'}})) {
+		setprop($p, $loadfile{'global'}->{$p});
+		print STDERR "." if (!$verbose);
+	}
+
+	my @users = usrlist();
+	foreach my $usr (keys(%loadfile)) {
+		next if ($usr eq 'global');
+		if (!grep(/^${usr}$/, @users)) {
+			print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
+			usradd($usr);
+		}
+		foreach my $p (keys(%{$loadfile{$usr}})) {
+			setusrprop($usr, $p, $loadfile{$usr}->{$p});
+			print STDERR "." if (!$verbose);
+		}
 	}
-	close(LOADFILE);
+	print STDERR "done\n" if (!$verbose);
+	print "Settings loaded, resetting board...\n";
+	_cmd("boardreset");
+	exit(0);
 }
 
 if ($enable_debug ne '') {
@@ -531,4 +745,14 @@ if ($powcyc) {
 	powercycle();
 }
 
+if ($showstat) {
+	status();
+}
+
+if ($resetrsbs2) {
+	print "Resetting board...\n";
+	_cmd("boardreset");
+	exit(0);
+}
+
 logout();