]> cvs.zerfleddert.de Git - usb-driver/blame - parport.c
Let usb-driver work with a no-module kernel by Gyorgy 'nog' Jeney
[usb-driver] / parport.c
CommitLineData
5e3d963b 1#include <stdio.h>
2#include <fcntl.h>
3#include <errno.h>
4#include <string.h>
5#include <unistd.h>
6#include <inttypes.h>
7#include <sys/types.h>
8#include <sys/ioctl.h>
9#include <linux/parport.h>
10#include <linux/ppdev.h>
11#include "usb-driver.h"
12#include "parport.h"
13
14static int parportfd = -1;
15
25ba7a49 16int parport_transfer(WD_TRANSFER *tr, int fd, unsigned int request, int ppbase, int ecpbase, int num) {
5e3d963b 17 int ret = 0;
18 int i;
19 unsigned long port;
20 unsigned char val;
21 static unsigned char last_pp_write = 0;
22
cf55ed64
MG
23 if (parportfd < 0)
24 return ret;
25
26 if (ioctl(parportfd, PPCLAIM) == -1)
27 return -1;
28
5e3d963b 29 for (i = 0; i < num; i++) {
30 DPRINTF("dwPort: 0x%lx, cmdTrans: %lu, dwbytes: %ld, fautoinc: %ld, dwoptions: %ld\n",
31 (unsigned long)tr[i].dwPort, tr[i].cmdTrans, tr[i].dwBytes,
32 tr[i].fAutoinc, tr[i].dwOptions);
33
34 port = (unsigned long)tr[i].dwPort;
35 val = tr[i].Data.Byte;
36
37#ifdef DEBUG
38 if (tr[i].cmdTrans == 13)
39 DPRINTF("write byte: %d\n", val);
40#endif
41
5e3d963b 42 if (port == ppbase + PP_DATA) {
43 DPRINTF("data port\n");
44 switch(tr[i].cmdTrans) {
45 case PP_READ:
46 ret = 0; /* We don't support reading of the data port */
47 break;
48
49 case PP_WRITE:
50 ret = ioctl(parportfd, PPWDATA, &val);
51 last_pp_write = val;
52 break;
53
54 default:
55 fprintf(stderr,"!!!Unsupported TRANSFER command: %lu!!!\n", tr[i].cmdTrans);
56 ret = -1;
57 break;
58 }
59 } else if (port == ppbase + PP_STATUS) {
60 DPRINTF("status port (last write: %d)\n", last_pp_write);
61 switch(tr[i].cmdTrans) {
62 case PP_READ:
63 ret = ioctl(parportfd, PPRSTATUS, &val);
64#ifdef FORCE_PC3_IDENT
65 val &= 0x5f;
66 if (last_pp_write & 0x40)
67 val |= 0x20;
68 else
69 val |= 0x80;
70#endif
71 break;
72
73 case PP_WRITE:
74 ret = 0; /* Status Port is readonly */
75 break;
76
77 default:
78 fprintf(stderr,"!!!Unsupported TRANSFER command: %lu!!!\n", tr[i].cmdTrans);
79 ret = -1;
80 break;
81 }
82 } else if (port == ppbase + PP_CONTROL) {
83 DPRINTF("control port\n");
84 switch(tr[i].cmdTrans) {
85 case PP_READ:
86 ret = ioctl(parportfd, PPRCONTROL, &val);
87 break;
88
89 case PP_WRITE:
90 ret = ioctl(parportfd, PPWCONTROL, &val);
91 break;
92
93 default:
94 fprintf(stderr,"!!!Unsupported TRANSFER command: %lu!!!\n", tr[i].cmdTrans);
95 ret = -1;
96 break;
97 }
98 } else if ((port == ecpbase + PP_ECP_CFGA) && ecpbase) {
99 DPRINTF("ECP_CFGA port\n");
100 } else if ((port == ecpbase + PP_ECP_CFGB) && ecpbase) {
101 DPRINTF("ECP_CFGB port\n");
102 } else if ((port == ecpbase + PP_ECP_ECR) && ecpbase) {
103 DPRINTF("ECP_ECR port\n");
104 } else {
105 DPRINTF("access to unsupported address range!\n");
106 ret = 0;
107 }
108
109 tr[i].Data.Byte = val;
110
111 DPRINTF("dwPortReturn: 0x%lx, cmdTrans: %lu, dwbytes: %ld, fautoinc: %ld, dwoptions: %ld\n",
112 (unsigned long)tr[i].dwPort, tr[i].cmdTrans, tr[i].dwBytes,
113 tr[i].fAutoinc, tr[i].dwOptions);
114#ifdef DEBUG
115 if (tr[i].cmdTrans == 10)
116 DPRINTF("read byte: %d\n", tr[i].Data.Byte);
117#endif
118 }
119
cf55ed64
MG
120 ioctl(parportfd, PPRELEASE);
121
5e3d963b 122 return ret;
123}
124
125int parport_open(int num) {
126 char ppdev[32];
127
128 if (parportfd < 0) {
129 snprintf(ppdev, sizeof(ppdev), "/dev/parport%u", num);
130 DPRINTF("opening %s\n", ppdev);
131 parportfd = open(ppdev, O_RDWR|O_EXCL);
132
133 if (parportfd < 0)
134 fprintf(stderr,"Can't open %s: %s\n", ppdev, strerror(errno));
135 }
136
137 if (parportfd >= 0) {
138 int pmode;
139
140 if (ioctl(parportfd, PPCLAIM) == -1)
141 return -1;
142
143 pmode = IEEE1284_MODE_COMPAT;
144 if (ioctl(parportfd, PPNEGOT, &pmode) == -1)
145 return -1;
146
cf55ed64 147 ioctl(parportfd, PPRELEASE);
5e3d963b 148#if 0
149 if (cr->Card.dwItems > 1 && cr->Card.Item[1].I.IO.dwAddr) {
150 DPRINTF("ECP mode requested\n");
151 ecpbase = (unsigned long)cr->Card.Item[1].I.IO.dwAddr;
152 /* TODO: Implement ECP mode */
153 pmode = IEEE1284_MODE_ECP;
154
155 if (ioctl(parportfd, PPNEGOT, &pmode) == -1) {
156 ecpbase = 0;
157 pmode = IEEE1284_MODE_COMPAT;
158 if (ioctl(parportfd, PPNEGOT, &pmode) == -1)
159 return ret;
160 }
161 }
162#endif
163 }
164
165 return parportfd;
166}
167
168void parport_close(int handle) {
169 if (parportfd == handle && parportfd >= 0) {
170 ioctl(parportfd, PPRELEASE);
171 close(parportfd);
172 parportfd = -1;
173 }
174}
Impressum, Datenschutz