Add setup script for USB cable which works on modern distributions

[usb-driver] / README

diff --git a/README b/README
index 6bf1097ed36cadc36b4c96c9d2b8b87feb420e49..802ca7809d8c5a7c9d65dec1d177efc77ebd71a9 100644 (file)
--- a/README
+++ b/README
@@ -66,6 +66,15 @@ the initial firmware has not been loaded (loading it changes the
 product-ID from another value to 8). To load the firmware follow
 these steps:
 
+1. Run ./setup_pcusb in this directory, this should set up everything
+   correctly:
+   - When $XILINX is set correctly:
+     $ ./setup_pcusb
+   - When $XILINX is not set, and ISE is installed in /opt/Xilinx/13.1:
+     $ ./setup_pcusb /opt/Xilinx/13.1/ISE_DS/ISE
+
+Old instructions, use only when the above script did not work:
+
 1. If you have no /etc/udev/rules.d/xusbdfwu.rules file, copy it from
    /path/to/ISE/bin/lin/xusbdfwu.rules to /etc/udev/rules.d/xusbdfwu.rules