XILINX platform cable USB DLC9 works, too (reported by Johannes Hanika)

[usb-driver] / usb-driver.h

diff --git a/usb-driver.h b/usb-driver.h
index faab9572cb5d30910133d71e289e6d358ecb8bcf..baddf4a56208fec525db31d373f98036e6a47483 100644 (file)
--- a/usb-driver.h
+++ b/usb-driver.h
@@ -1,6 +1,7 @@
 #define VERSION                        0x910
 #define LICENSE                        0x952
 #define TRANSFER               0x98c
 #define VERSION                        0x910
 #define LICENSE                        0x952
 #define TRANSFER               0x98c

+#define MULTI_TRANSFER         0x98d

 #define USB_TRANSFER           0x983
 #define EVENT_UNREGISTER       0x987
 #define INT_DISABLE            0x91f
 #define USB_TRANSFER           0x983
 #define EVENT_UNREGISTER       0x987
 #define INT_DISABLE            0x91f


@@ -12,9 +13,41 @@
 #define INT_ENABLE             0x98e
 #define EVENT_PULL             0x988
 #define USB_SET_INTERFACE      0x981
 #define INT_ENABLE             0x98e
 #define EVENT_PULL             0x988
 #define USB_SET_INTERFACE      0x981

+#define CARD_REGISTER_OLD      0x97d
+#define INT_ENABLE_OLD         0x91e
+#define USB_GET_DEVICE_DATA_OLD        0x980
+#define EVENT_REGISTER_OLD     0x986
+#define TRANSFER_OLD           0x903
+#define MULTI_TRANSFER_OLD     0x904

 
 #define MAGIC 0xa410b413UL
 
 
 #define MAGIC 0xa410b413UL
 

+#define PP_DATA                        0
+#define PP_STATUS              1
+#define PP_CONTROL             2
+#define PP_ECP_CFGA            0
+#define PP_ECP_CFGB            1
+#define PP_ECP_ECR             2
+#define PP_READ                        10
+#define PP_WRITE               13
+
+#define PP_TDI                 0x01
+#define PP_TDO                 0x10
+#define PP_PROG                        0x10
+#define PP_TCK                 0x02
+#define PP_TMS                 0x04
+#define PP_CTRL                        0x08
+
+#ifdef DEBUG
+#define DPRINTF(format, args...) fprintf(stderr, format, ##args)
+#else
+#define DPRINTF(format, args...)
+#endif
+
+void hexdump(unsigned char *buf, int len);
+
+#define WDU_GET_MAX_PACKET_SIZE(x)                ((unsigned short) (((x) & 0x7ff) * (1 + (((x) & 0x1800) >> 11))))
+

 /* http://www.jungo.com/support/documentation/windriver/811/wdusb_man_mhtml/node78.html#SECTION001734000000000000000 */
 
 struct header_struct {
 /* http://www.jungo.com/support/documentation/windriver/811/wdusb_man_mhtml/node78.html#SECTION001734000000000000000 */
 
 struct header_struct {


@@ -217,8 +250,8 @@ typedef struct
        {
                unsigned char Byte;     // Use for 8 bit transfer.
                unsigned short Word;     // Use for 16 bit transfer.
        {
                unsigned char Byte;     // Use for 8 bit transfer.
                unsigned short Word;     // Use for 16 bit transfer.

-               unsigned int Dword;   // Use for 32 bit transfer.
-               unsigned long long Qword;  // Use for 64 bit transfer.
+               uint32_t Dword;   // Use for 32 bit transfer.
+               uint64_t Qword;  // Use for 64 bit transfer.

                void* pBuffer; // Use for string transfer.
        } Data;
 } WD_TRANSFER, WD_TRANSFER_V61;
                void* pBuffer; // Use for string transfer.
        } Data;
 } WD_TRANSFER, WD_TRANSFER_V61;


@@ -350,3 +383,16 @@ struct usb_device_info {
        WDU_CONFIGURATION *pActiveConfig;
        WDU_INTERFACE *pActiveInterface[WD_USB_MAX_INTERFACES];
 };
        WDU_CONFIGURATION *pActiveConfig;
        WDU_INTERFACE *pActiveInterface[WD_USB_MAX_INTERFACES];
 };

+
+typedef enum {
+       WDU_DIR_IN     = 1,
+       WDU_DIR_OUT    = 2,
+       WDU_DIR_IN_OUT = 3
+} WDU_DIR;
+
+typedef enum {
+       PIPE_TYPE_CONTROL     = 0,
+       PIPE_TYPE_ISOCHRONOUS = 1,
+       PIPE_TYPE_BULK        = 2,
+       PIPE_TYPE_INTERRUPT   = 3
+} USB_PIPE_TYPE;