X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver/blobdiff_plain/7606d470883f796049a23df206b18f0477622790..19020bc569ecd311cbc5e8cdf8022365ac109a61:/README?ds=sidebyside

diff --git a/README b/README
index d0eeb65..97f1a14 100644
--- a/README
+++ b/README
@@ -115,14 +115,14 @@ To set-up the device:
                           ~~~~~~~~~
 
 2. Copy the sample libusb-driverrc to ~/.libusb-driverrc, edit it and replace
-   the vendor and product-id in the example file with the values from provided
-   in the lsusb-output. You can also change the 'parallel port' which is mapped
-   to this cable. Impact sees the device at that port as a Parallel Cable III.
+   the vendor and product-id in the example file with the values provided in
+   the lsusb-output. You can also change the 'parallel port' which is mapped to
+   this cable. Impact sees the device at that port as a Parallel Cable III.
 
 3. To use the device as an ordinary user, put the following line in a new file
    in /etc/udev/rules.d/ and restart udev:
    ACTION=="add", BUS=="usb", SYSFS{idVendor}=="0403", SYSFS{idProduct}=="cff8", MODE="666"
    (replace the vendor and product id with your values)
 
-The support for FTDI 2232 based devices is currently experimental and they are
-currently significantly slowen than the other supported cables.
+The support for FTDI 2232 based devices is experimental and they are currently
+significantly slower than the other supported cables.