Update README.md

diff --git a/README.md b/README.md
index 1f7fc1813418335f01d3b724be71ca604903cd37..907d06b59dfd879cc357ad3b9afe8df8f225bdb6 100644 (file)
--- a/README.md
+++ b/README.md
@@ -8,26 +8,26 @@ Michael Gernoth http://git.zerfleddert.de/cgi-bin/gitweb.cgi/hmcfgusb
 
 --------------------------------------------------------------------------------------
 
-This repository contains utilities to use the HM-CFG-USB(2) (HomeMatic USB Konfigurations-Adapter) from ELV on Linux/Unix by using libusb 1.0.
-The HM-CFG-USB can be used to send and receive BidCoS-Packets to control HomeMatic home automation devices (like remote controllable sockets, switches, sensors, ...).
+    This repository contains utilities to use the HM-CFG-USB(2) (HomeMatic USB Konfigurations-Adapter) from ELV on    Linux/Unix by using libusb 1.0.
+    The HM-CFG-USB can be used to send and receive BidCoS-Packets to control HomeMatic home automation devices (like remote controllable sockets, switches, sensors, ...).
 
-This repository contains, amongst others, an application, which emulates the HomeMatic LAN configuration adapter-protocol to make it possible to use the HM-CFG-USB in Fhem or as a lan configuration tool for the CCU or the HomeMatic windows configuration software.
+    This repository contains, amongst others, an application, which emulates the HomeMatic LAN configuration adapter-protocol to make it possible to use the HM-CFG-USB in Fhem or as a lan configuration tool for the CCU or the HomeMatic windows configuration software.
 
-Short hmland HowTo:
-Install prerequisites: apt-get install libusb-1.0-0-dev make gcc
-Get the current version of this software: hmcfgusb-HEAD-xxxxxxx.tar.gz (xxxxxxx is part of the commit-id. xxxxxxx is just a placeholder for this HowTo, use your value)
-Extract the archive: tar xzf hmcfgusb-HEAD-xxxxxxx.tar.gz
-Change into the new directory: cd hmcfgusb-HEAD-xxxxxxx
-Build the code: make
-Optional: Install udev-rules so normal users can access the device: sudo cp hmcfgusb.rules /etc/udev/rules.d/
-Plug in the HM-CFG-USB
-Run hmland (with debugging the first time, see -h switch): ./hmland -p 1234 -D
-Configure Fhem to use your new HMLAN device:
-define hmusb HMLAN 127.0.0.1:1234
-attr hmusb hmId <hmId>
-Updating the HM-CFG-USB firmware to version 0.967:
-Compile the hmcfgusb utilities like in the hmland HowTo above (steps 1 to 7) and stay in the directory
-Download the new firmware: hmusbif.03c7.enc: wget https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc
-Make sure that hmland is not running
-Flash the update to the USB-stick: ./flash-hmcfgusb hmusbif.03c7.enc (You might need to use sudo for this)
-(Old) Prebuilt package for OpenWRT (ar71xx): hmcfgusb_1_ar71xx.ipk
+    Short hmland HowTo:
+    Install prerequisites: apt-get install libusb-1.0-0-dev make gcc
+    Get the current version of this software: hmcfgusb-HEAD-xxxxxxx.tar.gz (xxxxxxx is part of the commit-id. xxxxxxx is just a placeholder for this HowTo, use your value)
+    Extract the archive: tar xzf hmcfgusb-HEAD-xxxxxxx.tar.gz
+    Change into the new directory: cd hmcfgusb-HEAD-xxxxxxx
+    Build the code: make
+    Optional: Install udev-rules so normal users can access the device: sudo cp hmcfgusb.rules /etc/udev/rules.d/
+    Plug in the HM-CFG-USB
+    Run hmland (with debugging the first time, see -h switch): ./hmland -p 1234 -D
+    Configure Fhem to use your new HMLAN device:
+    define hmusb HMLAN 127.0.0.1:1234
+    attr hmusb hmId <hmId>
+    Updating the HM-CFG-USB firmware to version 0.967:
+    Compile the hmcfgusb utilities like in the hmland HowTo above (steps 1 to 7) and stay in the directory
+    Download the new firmware: hmusbif.03c7.enc: wget https://git.zerfleddert.de/hmcfgusb/firmware/hmusbif.03c7.enc
+    Make sure that hmland is not running
+    Flash the update to the USB-stick: ./flash-hmcfgusb hmusbif.03c7.enc (You might need to use sudo for this)
+    (Old) Prebuilt package for OpenWRT (ar71xx): hmcfgusb_1_ar71xx.ipk