add missing kernel config option for usb-c

[m1-debian] / files / quickstart.txt

diff --git a/files/quickstart.txt b/files/quickstart.txt
index 1e21263b8e2905242fc09022aa57c0c60881c692..93b1d76818a45b3774eeb18c4bc36f79a0b938a1 100644 (file)
--- a/files/quickstart.txt
+++ b/files/quickstart.txt
@@ -1,3 +1,10 @@
+# grow the root partition
+sgdisk -n 0:0
+
+# grow root filesystem
+lsblk
+resize2fs /dev/nvme0n1pX
+

 # Ethernet
 ip l s
 dhclient <device>
 # Ethernet
 ip l s
 dhclient <device>


@@ -10,7 +17,7 @@ tar -C /lib/firmware/ -xf /mnt/linux-firmware.tar
 umount /mnt
 modprobe brcmfmac
 vim /etc/wpa_supplicant/wpa_supplicant.conf
 umount /mnt
 modprobe brcmfmac
 vim /etc/wpa_supplicant/wpa_supplicant.conf

-wpa_supplicant -i <interface> -c /etc/wpa_supplicant/wpa_supplicant.conf
+wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf

 dhclient wlan0
 
 # Time
 dhclient wlan0
 
 # Time


@@ -27,10 +34,15 @@ dpkg-reconfigure tzdata
 apt-get install grub-efi grub-efi-arm64-signed-
 grub-install --target=arm64-efi --efi-directory=/boot/efi --removable
 update-grub
 apt-get install grub-efi grub-efi-arm64-signed-
 grub-install --target=arm64-efi --efi-directory=/boot/efi --removable
 update-grub

+# Set removable media to yes and nvram to no to make later grub updates work
+dpkg-reconfigure grub-efi-arm64
+

 See also: https://github.com/AsahiLinux/docs/wiki/U-Boot
 
 # xorg
 See also: https://github.com/AsahiLinux/docs/wiki/U-Boot
 
 # xorg

-(air) [~] cat /etc/X11/xorg.conf.d/00-keyboard.conf
+
+# Keyboard use capslock as additional ctrl
+cat > /etc/X11/xorg.conf.d/00-keyboard.conf <<'EOF'

 Section "InputClass"
         Identifier "system-keyboard"
         MatchIsKeyboard "on"
 Section "InputClass"
         Identifier "system-keyboard"
         MatchIsKeyboard "on"


@@ -39,7 +51,13 @@ Section "InputClass"
         Option "XkbVariant" "de_se_fi"
         Option "XkbOptions" "ctrl:nocaps"
 EndSection
         Option "XkbVariant" "de_se_fi"
         Option "XkbOptions" "ctrl:nocaps"
 EndSection

-(air) [~] cat /etc/X11/xorg.conf.d/30-input.conf
+EOF
+
+# Swap command and option (windows and alt like on a pc keyboard)
+echo 1 > /sys/module/hid_apple/parameters/swap_opt_cmd
+
+# Configure the touchpad
+cat > /etc/X11/xorg.conf.d/30-input.conf <<'EOF'

 Section "InputClass"
   Identifier "libinput touchpad catchall"
   MatchIsTouchpad "on"
 Section "InputClass"
   Identifier "libinput touchpad catchall"
   MatchIsTouchpad "on"


@@ -58,10 +76,14 @@ Section "InputClass"
         Option "ClickMethod" "clickfinger"
   Driver "libinput"
 EndSection
         Option "ClickMethod" "clickfinger"
   Driver "libinput"
 EndSection

+EOF

 
 # Create a user
 
 # Create a user

-useradd -m -c 'user' user
-passwd user
+useradd -m -c 'firstname lastname' -s /bin/bash username
+passwd username
+
+# Lightweight desktop
+apt-get install lightdm blackbox xterm firefox-esr

 
 # Install gnome
 apt-get install gnome
 
 # Install gnome
 apt-get install gnome


@@ -71,6 +93,9 @@ apt-get install gnome
 wget https://tg.st/u/k.deb
 dpkg -i k.deb
 
 wget https://tg.st/u/k.deb
 dpkg -i k.deb
 

+# asahi does not handle sleep well at the moment
+sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target
+

 - You can also use the live system to install Debian on the m1, the rough outline is:
 
         - Create two paritions:
 - You can also use the live system to install Debian on the m1, the rough outline is:
 
         - Create two paritions:


@@ -80,6 +105,24 @@ dpkg -i k.deb
 
         - Use debootstrap to bootstrap debian
 
 
         - Use debootstrap to bootstrap debian
 

+        - Install the kernel
+

         - Install grub
 
         - reboot
         - Install grub
 
         - reboot

+
+Repack live
+===========
+You might want to save the state of your live system to the usb stick. In order
+to do so, run the following commands:
+
+apt update
+apt-get install -y cpio pigz
+rm /etc/rc.local
+# remove '#' before allow-hotplug
+vi /etc/network/interfaces
+mount /dev/sda1 /mnt
+mv /mnt/initrd.gz /mnt/initrd.old
+cd /
+find . -xdev | cpio --quiet -H newc -o | pigz -9 > /mnt/initrd.gz
+umount /mnt