This pages explains how to install Debian on Apple Silicon machines.

Tripwires

The USB-A Port on the Mac Mini will not work in u-boot and grub. The two additional USB-3 ports on the iMac 4 port model don't work in u-boot, grub and Linux. In order to install Linux on a FileVault-enabled Mac run the installer from Recovery open Disk Utility > Expanding "Macintosh HD" > Selecting locked volume > click "Mount". Debian does not include the choosen EFI patch. As a result it will always pick the first ESP partition. This can be problematic if you're using multiple ESP partitions for example when having multiple Linux and BSD installations.

Artefacts

If you don't want to use the prebuild artefacts, you can build them yourself using the following scripts:

    - prepare_rust.sh - Prepares a rust installation suitable for kernel compilation
    - m1n1_uboot_kernel.sh - Builds m1n1, u-boot and the kernel including gpu support.
    - mesa.sh - Creates mesa packages
    - bootstrap.sh - Creates Debian root and live filesystem
    - meta.sh - Meta package which makes sure that we always get latest and greatest kernel.

Asahi installer

Video Recording

• Poweroff your Mac. Hold and press the power button until you see a wheel chain and Options written below. Approx 20 seconds.

• In the boot picker, choose Options. Once loaded, open a Terminal under Utilities > Terminal

• Run the asahi installer and select Debian:

  curl -sL https://tg.st/d | sh
  

• Follow the installer instructions.

• Once Debian is booted log in as root without password and set a root password

  passwd
  pwconv
  

• Configure wifi by editing the wpa_supplicant.conf, enabling the interface and remove the # before allow-hotplug to enable it during boot.

  vi /etc/wpa_supplicant/wpa_supplicant.conf
  ifup wlan0
  vi /etc/network/interfaces
  

• Reboot to see if grub was correctly installed

  reboot
  

• Install a desktop environment for example blackbox

  apt-get update
  apt-get install -y xinit blackbox xterm firefox-esr lightdm
  

• Create yourself an unprivileged user

  useradd -m -c 'Firstname Lastname' -s /bin/bash <username>
  passwd <username>
  

• Optional install sshd. You can not log in as root, but only with your unprivileged user

  apt update
  apt install -y openssh-server
  

• Consult the /root/quickstart.txt file to find out how to do other interesting things.

Livesystem

Video Recording

• Prerequisites

  - USB Stick. this is what this guide assumes, but it is also possible
    to run the Debian livesystem from another PC using m1n1 chainloading.
    But if you know how to do that, you probably don't need this guide.
  - If possible use an Ethernet Dongle, less typing.
  

• Create USB Stick with a single vfat partition on it and untar the modified Debian installer on it. Instructions for Linux:

  # Identify the usb stick device
  lsblk
  
  
  DEVICE=/dev/sdX
  parted -a optimal $DEVICE mklabel msdos
  parted -a optimal $DEVICE mkpart primary fat32 2048s 100%
  mkfs.vfat ${DEVICE}1
  mount ${DEVICE}1 /mnt
  curl -sL https://tg.st/u/asahi-debian-live.tar | tar -C /mnt -xf -
  umount /mnt
  

In order to format the usb stick under Macos, open the disk utility, right-click on the usb stick (usually the lowest device in the list) and select erase. Choose the following options:

    Name: LIVE
    Format: MS-DOS (FAT)
    Scheme: Master Boot Record

Than open a terminal, and run the following commands:

    sudo su -
    cd /Volumes/LIVE
    curl -sL https://tg.st/u/asahi-debian-live.tar | tar -xf -

• You need to run the asahi installer and have either an OS installed or m1n1+UEFI.

• If you have a EFI binary on the NVMe and want to boot from the usb stick, you need to interrupt u-boot on the countdown by pressing any key and run the following comamnd to boot from usb:

  env set boot_efi_bootmgr; run bootcmd_usb0
  

• Reboot with the USB stick connected, the Debian livesystem should automatically start, if it doesn't load the kernel and initrd manually, you can use tab. For x try 0,1,2,...

  linux (hdX,msdos1)/vmlinuz
  initrd (hdX,msdos1)/initrd.gz
  boot
  

• Log in as root without password.

• Consult the /root/quickstart.txt file to find out how to get the networking up, etc.

FAQ

Why has there been no kernel update?

For Debian stable I'm currently unable to update the kernel due to the fact that the kernel requires new mesa packages and the new mesa package needs too many dependencies which are not in Debian stable and I'm not willing to add that many new packages. So I recommend that if you want the latest asahi kernel, mesa, sound and other packages, switch to testing and use Thomas Renards packages for testing. https://wiki.debian.org/Teams/Bananas

How to enable spakers?

Currently speakers are only supported on M1 air. Install the necessary packages:

    apt update
    apt upgrade -y
    apt dist-upgrade -y
    apt install -y alsa-ucm-conf-asahi speakersafetyd
    reboot

After the reboot I need to restart the speakersafetyd in order to hear sound out of the speakers:

    sudo systemctl restart speakersafetyd

Does it work on M2?

Yes, M3 is not yet supported.

Are you still maintaining this?

Yes, I do and will continue doing this until there is an official Debian installer.

If I install Debian, will it be easy to update the Asahi work as it develops?

Yes, long answer below.

To update the kernel to the lastest "stable" asahi branch you need to run as root:

    apt update
    apt upgrade

For installations before 2022-12-12, see https://thomas.glanzmann.de/asahi/README.txt

Later it might be necessary to upgrade the stub partion in order to support the GPU code. As soon as that happens, I'll add the instructions and a video in order to do so, but short version is:

    - Backup /boot/efi/EFI
    - Delete the old stub and efi/esp partition
    - Rerun the asahi installer with m1n1+u-boot option
    - Put the /boot/efi/EFI back

So, you never need to reinstall Debian. Kernel updates are easy, stub updates are a little bit more cumbersome but also seldom.

How do I compile zfs on apple silicon debian?

• In order to build zfs you need the rust environment. So from the m1-debian repository you have to run these scripts:

  ./dependencies.sh
  ./prepare_rust.sh
  

• Prepare your zfs build environment. You need to replace /home/sithglan/work/m1-debian with your path to your m1-debian checkout:

  export CARGO_HOME="/home/sithglan/work/m1-debian/build/cargo"
  export RUSTUP_HOME="/home/sithglan/work/m1-debian/build/rust"
  source "/home/sithglan/work/m1-debian/build/cargo/env"
  

• Tell zfs which version of clang you use to compile the kernel:

  export KERNEL_LLVM=-15
  

• Checkout ZFS:

  git clone https://github.com/openzfs/zfs
  cd ./zfs
  git checkout master
  

• Apply the following patch:

  diff --git a/META b/META
  index 3919b0d..67c9f7d 100644
  --- a/META
  +++ b/META
  @@ -4,7 +4,7 @@ Branch:        1.0
  Version:       2.2.99
  Release:       1
  Release-Tags:  relext
  -License:       CDDL
  +License:       GPL
  Author:        OpenZFS
  Linux-Maximum: 6.4
  Linux-Minimum: 3.10
  

• Build ZFS:

  sh autogen.sh
  ./configure
  make -s -j$(nproc)
  

• Follow the instructions on https://openzfs.github.io/openzfs-docs/Developer%20Resources/Building%20ZFS.html how to install it.

What about gnome?

You need an unpriviledged user to log in. You should delete /etc/network/interfaces in order to manage the network under gnome. If you don't have an US keyboard, you can change the settings in Gnome > Settings > Keyboard.