-# This is a developer quickstart guide for a tethered boot. If you're looking
-# for an enduser guide see: https://github.com/AsahiLinux/docs/wiki/Debian
-# If you find errors or I should have elaborated more to get you going faster,
-# please let me know in IRC. My nick is Glanzmann or drop me an email at
-# thomas@glanzmann.de
-
-# Boot into macos
-
-# Extract the firmware and save it somewhere you have access to.
-# This firmware needs to be extracted later in /lib/firmware
-
-curl -sL tg.st/u/fwx.sh | sh
-
-# Make space the last number is the size that MacOS instatllation should
-# consume. The minimum recommended is 100 GB to be able to apply updates later
-# on easily.
-
-diskutil apfs resizeContainer disk0s2 200GB
-
-# Run the installer, select as stub OS 12.1, in the boot picker you're supposed
-# to click Restart than return to the shell and wait until the installer is
-# finished and press Return to shutdown your system.
-
-curl -L https://mrcn.st/alxsh | sh
-
-# Wait for the system to shutdown and the LEDs turn off. Than wait another 5
-# seconds. Now press and do _not_ let go of the power button for 15 seconds.
-# If you screw up the power button holding, turn the System off by pressing the
-# power button until it is off and start from the beginning of this paragraph.
-# In the boot picker, select 'Options' and select Utilities > Terminal. In this
-# terminal execute:
-
-/Volumes/Linux/step2.sh
-
-# Create an EFI parition because the final layout will have that
-
-diskutil list
-diskutil addPartition <identifier before free space> %EFI% LB 512MB
-
-# Create partition to hold a rootfs (minimum 1GB if you want to use the rootfs below)
-
-diskutil list
-diskutil addPartition <identifier before free space> %Linux% %noformat% <size>
-
-# dd a Debian Testing rootfs on it (minimum size 1 GB)
-# Find the scripts to create that rootfs here: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/m1-debian
-
-curl -L https://tg.st/u/m1.tgz | tar -xOz | dd of=/dev/<identifier of Linux Filesystem> bs=8m
-
-# Build dependencies
-sudo apt install -y gcc-aarch64-linux-gnu libc6-dev-arm64-cross device-tree-compiler imagemagick build-essential bc kmod flex cpio libncurses5-dev libelf-dev:native bison libssl-dev
-
-# Crosscompile the kernel
-git clone --depth 1 https://github.com/AsahiLinux/linux
-cd linux
-curl -s https://tg.st/u/9ce9060dea91951a330feeeda3ad636bc88c642c.patch | git am -
-curl -s https://tg.st/u/5nly | git am -
-curl -s https://tg.st/u/config-2022-01-28 > .config
-make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig
-make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j32 Image.gz dtbs
-cd ..
-
-# build m1n1
-git clone --recursive https://github.com/AsahiLinux/m1n1.git
-cd m1n1
-make
-
# Export the control device for the proxyclient and friends
export M1N1DEVICE=/dev/ttyACM0
projects / m1-debian / blobdiff