cvs.zerfleddert.de Git - ms2-kexec/blob - entry-header.S

   1 #include <linux/init.h>
   2 #include <linux/linkage.h>
   3
   4 #include <asm/assembler.h>
   5 #include <asm/asm-offsets.h>
   6 #include <asm/errno.h>
   7 #include <asm/thread_info.h>
   8
   9 @ Bad Abort numbers
  10 @ -----------------
  11 @
  12 #define BAD_PREFETCH    0
  13 #define BAD_DATA        1
  14 #define BAD_ADDREXCPTN  2
  15 #define BAD_IRQ         3
  16 #define BAD_UNDEFINSTR  4
  17
  18 @
  19 @ Most of the stack format comes from struct pt_regs, but with
  20 @ the addition of 8 bytes for storing syscall args 5 and 6.
  21 @ This _must_ remain a multiple of 8 for EABI.
  22 @
  23 #define S_OFF           8
  24
  25 /*
  26  * The SWI code relies on the fact that R0 is at the bottom of the stack
  27  * (due to slow/fast restore user regs).
  28  */
  29 #if S_R0 != 0
  30 #error "Please fix"
  31 #endif
  32
  33         .macro  zero_fp
  34 #ifdef CONFIG_FRAME_POINTER
  35         mov     fp, #0
  36 #endif
  37         .endm
  38
  39         .macro  alignment_trap, rtemp
  40 #ifdef CONFIG_ALIGNMENT_TRAP
  41         ldr     \rtemp, .LCcralign
  42         ldr     \rtemp, [\rtemp]
  43         mcr     p15, 0, \rtemp, c1, c0
  44 #endif
  45         .endm
  46
  47         @
  48         @ Store/load the USER SP and LR registers by switching to the SYS
  49         @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
  50         @ available. Should only be called from SVC mode
  51         @
  52         .macro  store_user_sp_lr, rd, rtemp, offset = 0
  53         mrs     \rtemp, cpsr
  54         eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
  55         msr     cpsr_c, \rtemp                  @ switch to the SYS mode
  56
  57         str     sp, [\rd, #\offset]             @ save sp_usr
  58         str     lr, [\rd, #\offset + 4]         @ save lr_usr
  59
  60         eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
  61         msr     cpsr_c, \rtemp                  @ switch back to the SVC mode
  62         .endm
  63
  64         .macro  load_user_sp_lr, rd, rtemp, offset = 0
  65         mrs     \rtemp, cpsr
  66         eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
  67         msr     cpsr_c, \rtemp                  @ switch to the SYS mode
  68
  69         ldr     sp, [\rd, #\offset]             @ load sp_usr
  70         ldr     lr, [\rd, #\offset + 4]         @ load lr_usr
  71
  72         eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
  73         msr     cpsr_c, \rtemp                  @ switch back to the SVC mode
  74         .endm
  75
  76 #ifndef CONFIG_THUMB2_KERNEL
  77         .macro  svc_exit, rpsr
  78         msr     spsr_cxsf, \rpsr
  79 #if defined(CONFIG_CPU_32v6K)
  80         clrex                                   @ clear the exclusive monitor
  81         ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr
  82 #elif defined (CONFIG_CPU_V6)
  83         ldr     r0, [sp]
  84         strex   r1, r2, [sp]                    @ clear the exclusive monitor
  85         ldmib   sp, {r1 - pc}^                  @ load r1 - pc, cpsr
  86 #else
  87         ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr
  88 #endif
  89         .endm
  90
  91         .macro  restore_user_regs, fast = 0, offset = 0
  92         ldr     r1, [sp, #\offset + S_PSR]      @ get calling cpsr
  93         ldr     lr, [sp, #\offset + S_PC]!      @ get pc
  94         msr     spsr_cxsf, r1                   @ save in spsr_svc
  95 #if defined(CONFIG_CPU_32v6K)
  96         clrex                                   @ clear the exclusive monitor
  97 #elif defined (CONFIG_CPU_V6)
  98         strex   r1, r2, [sp]                    @ clear the exclusive monitor
  99 #endif
 100         .if     \fast
 101         ldmdb   sp, {r1 - lr}^                  @ get calling r1 - lr
 102         .else
 103         ldmdb   sp, {r0 - lr}^                  @ get calling r0 - lr
 104         .endif
 105         add     sp, sp, #S_FRAME_SIZE - S_PC
 106         movs    pc, lr                          @ return & move spsr_svc into cpsr
 107         .endm
 108
 109         .macro  get_thread_info, rd
 110         mov     \rd, sp, lsr #13
 111         mov     \rd, \rd, lsl #13
 112         .endm
 113
 114         @
 115         @ 32-bit wide "mov pc, reg"
 116         @
 117         .macro  movw_pc, reg
 118         mov     pc, \reg
 119         .endm
 120 #else   /* CONFIG_THUMB2_KERNEL */
 121         .macro  svc_exit, rpsr
 122         clrex                                   @ clear the exclusive monitor
 123         ldr     r0, [sp, #S_SP]                 @ top of the stack
 124         ldr     r1, [sp, #S_PC]                 @ return address
 125         tst     r0, #4                          @ orig stack 8-byte aligned?
 126         stmdb   r0, {r1, \rpsr}                 @ rfe context
 127         ldmia   sp, {r0 - r12}
 128         ldr     lr, [sp, #S_LR]
 129         addeq   sp, sp, #S_FRAME_SIZE - 8       @ aligned
 130         addne   sp, sp, #S_FRAME_SIZE - 4       @ not aligned
 131         rfeia   sp!
 132         .endm
 133
 134         .macro  restore_user_regs, fast = 0, offset = 0
 135         clrex                                   @ clear the exclusive monitor
 136         mov     r2, sp
 137         load_user_sp_lr r2, r3, \offset + S_SP  @ calling sp, lr
 138         ldr     r1, [sp, #\offset + S_PSR]      @ get calling cpsr
 139         ldr     lr, [sp, #\offset + S_PC]       @ get pc
 140         add     sp, sp, #\offset + S_SP
 141         msr     spsr_cxsf, r1                   @ save in spsr_svc
 142         .if     \fast
 143         ldmdb   sp, {r1 - r12}                  @ get calling r1 - r12
 144         .else
 145         ldmdb   sp, {r0 - r12}                  @ get calling r0 - r12
 146         .endif
 147         add     sp, sp, #S_FRAME_SIZE - S_SP
 148         movs    pc, lr                          @ return & move spsr_svc into cpsr
 149         .endm
 150
 151         .macro  get_thread_info, rd
 152         mov     \rd, sp
 153         lsr     \rd, \rd, #13
 154         mov     \rd, \rd, lsl #13
 155         .endm
 156
 157         @
 158         @ 32-bit wide "mov pc, reg"
 159         @
 160         .macro  movw_pc, reg
 161         mov     pc, \reg
 162         nop
 163         .endm
 164 #endif  /* !CONFIG_THUMB2_KERNEL */
 165
 166 /*
 167  * These are the registers used in the syscall handler, and allow us to
 168  * have in theory up to 7 arguments to a function - r0 to r6.
 169  *
 170  * r7 is reserved for the system call number for thumb mode.
 171  *
 172  * Note that tbl == why is intentional.
 173  *
 174  * We must set at least "tsk" and "why" when calling ret_with_reschedule.
 175  */
 176 scno    .req    r7              @ syscall number
 177 tbl     .req    r8              @ syscall table pointer
 178 why     .req    r8              @ Linux syscall (!= 0)
 179 tsk     .req    r9              @ current thread_info