projects / proxmark3-svn / blame
| Commit | Line | Data |
|---|---|---|
| 15c4dc5a | 1 | //----------------------------------------------------------------------------- |
| bd20f8f4 | 2 | // This code is licensed to you under the terms of the GNU GPL, version 2 or, |
| 3 | // at your option, any later version. See the LICENSE.txt file for the text of | |
| 4 | // the license. | |
| 5 | //----------------------------------------------------------------------------- | |
| 15c4dc5a | 6 | // Miscellaneous routines for low frequency tag operations. |
| 7 | // Tags supported here so far are Texas Instruments (TI), HID | |
| 8 | // Also routines for raw mode reading/simulating of LF waveform | |
| 15c4dc5a | 9 | //----------------------------------------------------------------------------- |
| bd20f8f4 | 10 | |
| e30c654b | 11 | #include "proxmark3.h" |
| 15c4dc5a | 12 | #include "apps.h" |
| f7e3ed82 | 13 | #include "util.h" |
| 15c4dc5a | 14 | #include "hitag2.h" |
| 15 | #include "crc16.h" | |
| 9ab7a6c7 | 16 | #include "string.h" |
| 7db5f1ca | 17 | #include "lfdemod.h" |
| 31abe49f | 18 | #include "lfsampling.h" |
| 15c4dc5a | 19 | |
| b2256785 MHS |
20 | |
| 21 | /** | |
| 31abe49f MHS |
22 | * Function to do a modulation and then get samples. |
| 23 | * @param delay_off | |
| 24 | * @param period_0 | |
| 25 | * @param period_1 | |
| 26 | * @param command | |
| 7c676e72 | 27 | */ |
| f7e3ed82 | 28 | void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command) |
| 15c4dc5a | 29 | { |
| 15c4dc5a | 30 | |
| ae8e8a43 MHS |
31 | int divisor_used = 95; // 125 KHz |
| 32 | // see if 'h' was specified | |
| b2256785 | 33 | |
| ae8e8a43 MHS |
34 | if (command[strlen((char *) command) - 1] == 'h') |
| 35 | divisor_used = 88; // 134.8 KHz | |
| 15c4dc5a | 36 | |
| 31abe49f MHS |
37 | sample_config sc = { 0,0,1, divisor_used, 0}; |
| 38 | setSamplingConfig(&sc); | |
| 15c4dc5a | 39 | |
| 2b61c242 | 40 | /* Make sure the tag is reset */ |
| 41 | FpgaDownloadAndGo(FPGA_BITSTREAM_LF); | |
| 42 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 43 | SpinDelay(2500); | |
| b2256785 | 44 | |
| 31abe49f | 45 | LFSetupFPGAForADC(sc.divisor, 1); |
| b2256785 | 46 | |
| ae8e8a43 MHS |
47 | // And a little more time for the tag to fully power up |
| 48 | SpinDelay(2000); | |
| 15c4dc5a | 49 | |
| ae8e8a43 MHS |
50 | // now modulate the reader field |
| 51 | while(*command != '\0' && *command != ' ') { | |
| 52 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 53 | LED_D_OFF(); | |
| 54 | SpinDelayUs(delay_off); | |
| 31abe49f | 55 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); |
| 15c4dc5a | 56 | |
| ae8e8a43 MHS |
57 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); |
| 58 | LED_D_ON(); | |
| 59 | if(*(command++) == '0') | |
| 60 | SpinDelayUs(period_0); | |
| 61 | else | |
| 62 | SpinDelayUs(period_1); | |
| 63 | } | |
| 64 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 65 | LED_D_OFF(); | |
| 66 | SpinDelayUs(delay_off); | |
| 31abe49f | 67 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor); |
| 15c4dc5a | 68 | |
| ae8e8a43 | 69 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); |
| 15c4dc5a | 70 | |
| ae8e8a43 | 71 | // now do the read |
| 31abe49f | 72 | DoAcquisition_config(false); |
| 15c4dc5a | 73 | } |
| 74 | ||
| 31abe49f MHS |
75 | |
| 76 | ||
| 15c4dc5a | 77 | /* blank r/w tag data stream |
| 78 | ...0000000000000000 01111111 | |
| 79 | 1010101010101010101010101010101010101010101010101010101010101010 | |
| 80 | 0011010010100001 | |
| 81 | 01111111 | |
| 82 | 101010101010101[0]000... | |
| 83 | ||
| 84 | [5555fe852c5555555555555555fe0000] | |
| 85 | */ | |
| 86 | void ReadTItag(void) | |
| 87 | { | |
| ae8e8a43 MHS |
88 | // some hardcoded initial params |
| 89 | // when we read a TI tag we sample the zerocross line at 2Mhz | |
| 90 | // TI tags modulate a 1 as 16 cycles of 123.2Khz | |
| 91 | // TI tags modulate a 0 as 16 cycles of 134.2Khz | |
| ba1a299c | 92 | #define FSAMPLE 2000000 |
| 93 | #define FREQLO 123200 | |
| 94 | #define FREQHI 134200 | |
| ae8e8a43 | 95 | |
| 117d9ec2 | 96 | signed char *dest = (signed char *)BigBuf_get_addr(); |
| f71f4deb | 97 | uint16_t n = BigBuf_max_traceLen(); |
| ae8e8a43 MHS |
98 | // 128 bit shift register [shift3:shift2:shift1:shift0] |
| 99 | uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0; | |
| 100 | ||
| 101 | int i, cycles=0, samples=0; | |
| 102 | // how many sample points fit in 16 cycles of each frequency | |
| 103 | uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI; | |
| 104 | // when to tell if we're close enough to one freq or another | |
| 105 | uint32_t threshold = (sampleslo - sampleshi + 1)>>1; | |
| 106 | ||
| 107 | // TI tags charge at 134.2Khz | |
| 108 | FpgaDownloadAndGo(FPGA_BITSTREAM_LF); | |
| 109 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
| 110 | ||
| 111 | // Place FPGA in passthrough mode, in this mode the CROSS_LO line | |
| 112 | // connects to SSP_DIN and the SSP_DOUT logic level controls | |
| 113 | // whether we're modulating the antenna (high) | |
| 114 | // or listening to the antenna (low) | |
| 115 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU); | |
| 116 | ||
| 117 | // get TI tag data into the buffer | |
| 118 | AcquireTiType(); | |
| 119 | ||
| 120 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 121 | ||
| 122 | for (i=0; i<n-1; i++) { | |
| 123 | // count cycles by looking for lo to hi zero crossings | |
| 124 | if ( (dest[i]<0) && (dest[i+1]>0) ) { | |
| 125 | cycles++; | |
| 126 | // after 16 cycles, measure the frequency | |
| 127 | if (cycles>15) { | |
| 128 | cycles=0; | |
| 129 | samples=i-samples; // number of samples in these 16 cycles | |
| 130 | ||
| 131 | // TI bits are coming to us lsb first so shift them | |
| 132 | // right through our 128 bit right shift register | |
| 133 | shift0 = (shift0>>1) | (shift1 << 31); | |
| 134 | shift1 = (shift1>>1) | (shift2 << 31); | |
| 135 | shift2 = (shift2>>1) | (shift3 << 31); | |
| 136 | shift3 >>= 1; | |
| 137 | ||
| 138 | // check if the cycles fall close to the number | |
| 139 | // expected for either the low or high frequency | |
| 140 | if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) { | |
| 141 | // low frequency represents a 1 | |
| 142 | shift3 |= (1<<31); | |
| 143 | } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) { | |
| 144 | // high frequency represents a 0 | |
| 145 | } else { | |
| 146 | // probably detected a gay waveform or noise | |
| 147 | // use this as gaydar or discard shift register and start again | |
| 148 | shift3 = shift2 = shift1 = shift0 = 0; | |
| 149 | } | |
| 150 | samples = i; | |
| 151 | ||
| 152 | // for each bit we receive, test if we've detected a valid tag | |
| 153 | ||
| 154 | // if we see 17 zeroes followed by 6 ones, we might have a tag | |
| 155 | // remember the bits are backwards | |
| 156 | if ( ((shift0 & 0x7fffff) == 0x7e0000) ) { | |
| 157 | // if start and end bytes match, we have a tag so break out of the loop | |
| 158 | if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) { | |
| 159 | cycles = 0xF0B; //use this as a flag (ugly but whatever) | |
| 160 | break; | |
| 161 | } | |
| 162 | } | |
| 163 | } | |
| 164 | } | |
| 165 | } | |
| 166 | ||
| 167 | // if flag is set we have a tag | |
| 168 | if (cycles!=0xF0B) { | |
| 169 | DbpString("Info: No valid tag detected."); | |
| 170 | } else { | |
| 171 | // put 64 bit data into shift1 and shift0 | |
| 172 | shift0 = (shift0>>24) | (shift1 << 8); | |
| 173 | shift1 = (shift1>>24) | (shift2 << 8); | |
| 174 | ||
| 175 | // align 16 bit crc into lower half of shift2 | |
| 176 | shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff; | |
| 177 | ||
| 178 | // if r/w tag, check ident match | |
| ba1a299c | 179 | if (shift3 & (1<<15) ) { |
| ae8e8a43 MHS |
180 | DbpString("Info: TI tag is rewriteable"); |
| 181 | // only 15 bits compare, last bit of ident is not valid | |
| ba1a299c | 182 | if (((shift3 >> 16) ^ shift0) & 0x7fff ) { |
| ae8e8a43 MHS |
183 | DbpString("Error: Ident mismatch!"); |
| 184 | } else { | |
| 185 | DbpString("Info: TI tag ident is valid"); | |
| 186 | } | |
| 187 | } else { | |
| 188 | DbpString("Info: TI tag is readonly"); | |
| 189 | } | |
| 190 | ||
| 191 | // WARNING the order of the bytes in which we calc crc below needs checking | |
| 192 | // i'm 99% sure the crc algorithm is correct, but it may need to eat the | |
| 193 | // bytes in reverse or something | |
| 194 | // calculate CRC | |
| 195 | uint32_t crc=0; | |
| 196 | ||
| 197 | crc = update_crc16(crc, (shift0)&0xff); | |
| 198 | crc = update_crc16(crc, (shift0>>8)&0xff); | |
| 199 | crc = update_crc16(crc, (shift0>>16)&0xff); | |
| 200 | crc = update_crc16(crc, (shift0>>24)&0xff); | |
| 201 | crc = update_crc16(crc, (shift1)&0xff); | |
| 202 | crc = update_crc16(crc, (shift1>>8)&0xff); | |
| 203 | crc = update_crc16(crc, (shift1>>16)&0xff); | |
| 204 | crc = update_crc16(crc, (shift1>>24)&0xff); | |
| 205 | ||
| 206 | Dbprintf("Info: Tag data: %x%08x, crc=%x", | |
| 207 | (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); | |
| 208 | if (crc != (shift2&0xffff)) { | |
| 209 | Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc); | |
| 210 | } else { | |
| 211 | DbpString("Info: CRC is good"); | |
| 212 | } | |
| 213 | } | |
| 15c4dc5a | 214 | } |
| 215 | ||
| f7e3ed82 | 216 | void WriteTIbyte(uint8_t b) |
| 15c4dc5a | 217 | { |
| ae8e8a43 MHS |
218 | int i = 0; |
| 219 | ||
| 220 | // modulate 8 bits out to the antenna | |
| 221 | for (i=0; i<8; i++) | |
| 222 | { | |
| 223 | if (b&(1<<i)) { | |
| 224 | // stop modulating antenna | |
| 225 | LOW(GPIO_SSC_DOUT); | |
| 226 | SpinDelayUs(1000); | |
| 227 | // modulate antenna | |
| 228 | HIGH(GPIO_SSC_DOUT); | |
| 229 | SpinDelayUs(1000); | |
| 230 | } else { | |
| 231 | // stop modulating antenna | |
| 232 | LOW(GPIO_SSC_DOUT); | |
| 233 | SpinDelayUs(300); | |
| 234 | // modulate antenna | |
| 235 | HIGH(GPIO_SSC_DOUT); | |
| 236 | SpinDelayUs(1700); | |
| 237 | } | |
| 238 | } | |
| 15c4dc5a | 239 | } |
| 240 | ||
| 241 | void AcquireTiType(void) | |
| 242 | { | |
| ae8e8a43 MHS |
243 | int i, j, n; |
| 244 | // tag transmission is <20ms, sampling at 2M gives us 40K samples max | |
| 245 | // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t | |
| ba1a299c | 246 | #define TIBUFLEN 1250 |
| ae8e8a43 MHS |
247 | |
| 248 | // clear buffer | |
| 117d9ec2 | 249 | uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr(); |
| f71f4deb | 250 | memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t)); |
| ae8e8a43 MHS |
251 | |
| 252 | // Set up the synchronous serial port | |
| 253 | AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN; | |
| 254 | AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN; | |
| 255 | ||
| 256 | // steal this pin from the SSP and use it to control the modulation | |
| 257 | AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; | |
| 258 | AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; | |
| 259 | ||
| 260 | AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST; | |
| 261 | AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN; | |
| 262 | ||
| 263 | // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long | |
| 264 | // 48/2 = 24 MHz clock must be divided by 12 | |
| 265 | AT91C_BASE_SSC->SSC_CMR = 12; | |
| 266 | ||
| 267 | AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0); | |
| 268 | AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF; | |
| 269 | AT91C_BASE_SSC->SSC_TCMR = 0; | |
| 270 | AT91C_BASE_SSC->SSC_TFMR = 0; | |
| 271 | ||
| 272 | LED_D_ON(); | |
| 273 | ||
| 274 | // modulate antenna | |
| 275 | HIGH(GPIO_SSC_DOUT); | |
| 276 | ||
| 277 | // Charge TI tag for 50ms. | |
| 278 | SpinDelay(50); | |
| 279 | ||
| 280 | // stop modulating antenna and listen | |
| 281 | LOW(GPIO_SSC_DOUT); | |
| 282 | ||
| 283 | LED_D_OFF(); | |
| 284 | ||
| 285 | i = 0; | |
| 286 | for(;;) { | |
| 287 | if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { | |
| 288 | BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer | |
| 289 | i++; if(i >= TIBUFLEN) break; | |
| 290 | } | |
| 291 | WDT_HIT(); | |
| 292 | } | |
| 293 | ||
| 294 | // return stolen pin to SSP | |
| 295 | AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT; | |
| 296 | AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT; | |
| 297 | ||
| 117d9ec2 | 298 | char *dest = (char *)BigBuf_get_addr(); |
| ae8e8a43 MHS |
299 | n = TIBUFLEN*32; |
| 300 | // unpack buffer | |
| 301 | for (i=TIBUFLEN-1; i>=0; i--) { | |
| 302 | for (j=0; j<32; j++) { | |
| 303 | if(BigBuf[i] & (1 << j)) { | |
| 304 | dest[--n] = 1; | |
| 305 | } else { | |
| 306 | dest[--n] = -1; | |
| 307 | } | |
| 308 | } | |
| 309 | } | |
| 15c4dc5a | 310 | } |
| 311 | ||
| 312 | // arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc | |
| 313 | // if crc provided, it will be written with the data verbatim (even if bogus) | |
| 314 | // if not provided a valid crc will be computed from the data and written. | |
| f7e3ed82 | 315 | void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) |
| 15c4dc5a | 316 | { |
| ae8e8a43 MHS |
317 | FpgaDownloadAndGo(FPGA_BITSTREAM_LF); |
| 318 | if(crc == 0) { | |
| 319 | crc = update_crc16(crc, (idlo)&0xff); | |
| 320 | crc = update_crc16(crc, (idlo>>8)&0xff); | |
| 321 | crc = update_crc16(crc, (idlo>>16)&0xff); | |
| 322 | crc = update_crc16(crc, (idlo>>24)&0xff); | |
| 323 | crc = update_crc16(crc, (idhi)&0xff); | |
| 324 | crc = update_crc16(crc, (idhi>>8)&0xff); | |
| 325 | crc = update_crc16(crc, (idhi>>16)&0xff); | |
| 326 | crc = update_crc16(crc, (idhi>>24)&0xff); | |
| 327 | } | |
| 328 | Dbprintf("Writing to tag: %x%08x, crc=%x", | |
| 329 | (unsigned int) idhi, (unsigned int) idlo, crc); | |
| 330 | ||
| 331 | // TI tags charge at 134.2Khz | |
| 332 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz | |
| 333 | // Place FPGA in passthrough mode, in this mode the CROSS_LO line | |
| 334 | // connects to SSP_DIN and the SSP_DOUT logic level controls | |
| 335 | // whether we're modulating the antenna (high) | |
| 336 | // or listening to the antenna (low) | |
| 337 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU); | |
| 338 | LED_A_ON(); | |
| 339 | ||
| 340 | // steal this pin from the SSP and use it to control the modulation | |
| 341 | AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; | |
| 342 | AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; | |
| 343 | ||
| 344 | // writing algorithm: | |
| 345 | // a high bit consists of a field off for 1ms and field on for 1ms | |
| 346 | // a low bit consists of a field off for 0.3ms and field on for 1.7ms | |
| 347 | // initiate a charge time of 50ms (field on) then immediately start writing bits | |
| 348 | // start by writing 0xBB (keyword) and 0xEB (password) | |
| 349 | // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer) | |
| 350 | // finally end with 0x0300 (write frame) | |
| 351 | // all data is sent lsb firts | |
| 352 | // finish with 15ms programming time | |
| 353 | ||
| 354 | // modulate antenna | |
| 355 | HIGH(GPIO_SSC_DOUT); | |
| 356 | SpinDelay(50); // charge time | |
| 357 | ||
| 358 | WriteTIbyte(0xbb); // keyword | |
| 359 | WriteTIbyte(0xeb); // password | |
| 360 | WriteTIbyte( (idlo )&0xff ); | |
| 361 | WriteTIbyte( (idlo>>8 )&0xff ); | |
| 362 | WriteTIbyte( (idlo>>16)&0xff ); | |
| 363 | WriteTIbyte( (idlo>>24)&0xff ); | |
| 364 | WriteTIbyte( (idhi )&0xff ); | |
| 365 | WriteTIbyte( (idhi>>8 )&0xff ); | |
| 366 | WriteTIbyte( (idhi>>16)&0xff ); | |
| 367 | WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo | |
| 368 | WriteTIbyte( (crc )&0xff ); // crc lo | |
| 369 | WriteTIbyte( (crc>>8 )&0xff ); // crc hi | |
| 370 | WriteTIbyte(0x00); // write frame lo | |
| 371 | WriteTIbyte(0x03); // write frame hi | |
| 372 | HIGH(GPIO_SSC_DOUT); | |
| 373 | SpinDelay(50); // programming time | |
| 374 | ||
| 375 | LED_A_OFF(); | |
| 376 | ||
| 377 | // get TI tag data into the buffer | |
| 378 | AcquireTiType(); | |
| 379 | ||
| 380 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 381 | DbpString("Now use tiread to check"); | |
| 15c4dc5a | 382 | } |
| 383 | ||
| 385f3987 | 384 | void SimulateTagLowFrequency(uint16_t period, uint32_t gap, uint8_t ledcontrol) |
| 15c4dc5a | 385 | { |
| ae8e8a43 | 386 | int i; |
| 117d9ec2 | 387 | uint8_t *tab = BigBuf_get_addr(); |
| ba1a299c | 388 | |
| ae8e8a43 MHS |
389 | FpgaDownloadAndGo(FPGA_BITSTREAM_LF); |
| 390 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); | |
| ba1a299c | 391 | |
| ae8e8a43 | 392 | AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK; |
| ba1a299c | 393 | |
| ae8e8a43 MHS |
394 | AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; |
| 395 | AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK; | |
| ba1a299c | 396 | |
| 15c4dc5a | 397 | #define SHORT_COIL() LOW(GPIO_SSC_DOUT) |
| 398 | #define OPEN_COIL() HIGH(GPIO_SSC_DOUT) | |
| ba1a299c | 399 | |
| ae8e8a43 MHS |
400 | i = 0; |
| 401 | for(;;) { | |
| 402 | while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) { | |
| 403 | if(BUTTON_PRESS()) { | |
| 404 | DbpString("Stopped"); | |
| 405 | return; | |
| 406 | } | |
| 407 | WDT_HIT(); | |
| 408 | } | |
| 952a8bb5 | 409 | |
| ae8e8a43 MHS |
410 | if (ledcontrol) |
| 411 | LED_D_ON(); | |
| 952a8bb5 | 412 | |
| ae8e8a43 MHS |
413 | if(tab[i]) |
| 414 | OPEN_COIL(); | |
| 415 | else | |
| 416 | SHORT_COIL(); | |
| 952a8bb5 | 417 | |
| ae8e8a43 MHS |
418 | if (ledcontrol) |
| 419 | LED_D_OFF(); | |
| 952a8bb5 | 420 | |
| ae8e8a43 MHS |
421 | while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) { |
| 422 | if(BUTTON_PRESS()) { | |
| 423 | DbpString("Stopped"); | |
| 424 | return; | |
| 425 | } | |
| 426 | WDT_HIT(); | |
| 427 | } | |
| 952a8bb5 | 428 | |
| ae8e8a43 MHS |
429 | i++; |
| 430 | if(i == period) { | |
| 431 | i = 0; | |
| 432 | if (gap) { | |
| 433 | SHORT_COIL(); | |
| 434 | SpinDelayUs(gap); | |
| 435 | } | |
| 436 | } | |
| 437 | } | |
| 15c4dc5a | 438 | } |
| 439 | ||
| 15c4dc5a | 440 | #define DEBUG_FRAME_CONTENTS 1 |
| 441 | void SimulateTagLowFrequencyBidir(int divisor, int t0) | |
| 442 | { | |
| 15c4dc5a | 443 | } |
| 444 | ||
| 445 | // compose fc/8 fc/10 waveform | |
| 446 | static void fc(int c, int *n) { | |
| 117d9ec2 | 447 | uint8_t *dest = BigBuf_get_addr(); |
| ae8e8a43 MHS |
448 | int idx; |
| 449 | ||
| 450 | // for when we want an fc8 pattern every 4 logical bits | |
| 451 | if(c==0) { | |
| 452 | dest[((*n)++)]=1; | |
| 453 | dest[((*n)++)]=1; | |
| 454 | dest[((*n)++)]=0; | |
| 455 | dest[((*n)++)]=0; | |
| 456 | dest[((*n)++)]=0; | |
| 457 | dest[((*n)++)]=0; | |
| 458 | dest[((*n)++)]=0; | |
| 459 | dest[((*n)++)]=0; | |
| 460 | } | |
| 461 | // an fc/8 encoded bit is a bit pattern of 11000000 x6 = 48 samples | |
| 462 | if(c==8) { | |
| 463 | for (idx=0; idx<6; idx++) { | |
| 464 | dest[((*n)++)]=1; | |
| 465 | dest[((*n)++)]=1; | |
| 466 | dest[((*n)++)]=0; | |
| 467 | dest[((*n)++)]=0; | |
| 468 | dest[((*n)++)]=0; | |
| 469 | dest[((*n)++)]=0; | |
| 470 | dest[((*n)++)]=0; | |
| 471 | dest[((*n)++)]=0; | |
| 472 | } | |
| 473 | } | |
| 474 | ||
| 475 | // an fc/10 encoded bit is a bit pattern of 1110000000 x5 = 50 samples | |
| 476 | if(c==10) { | |
| 477 | for (idx=0; idx<5; idx++) { | |
| 478 | dest[((*n)++)]=1; | |
| 479 | dest[((*n)++)]=1; | |
| 480 | dest[((*n)++)]=1; | |
| 481 | dest[((*n)++)]=0; | |
| 482 | dest[((*n)++)]=0; | |
| 483 | dest[((*n)++)]=0; | |
| 484 | dest[((*n)++)]=0; | |
| 485 | dest[((*n)++)]=0; | |
| 486 | dest[((*n)++)]=0; | |
| 487 | dest[((*n)++)]=0; | |
| 488 | } | |
| 489 | } | |
| 15c4dc5a | 490 | } |
| 491 | ||
| 492 | // prepare a waveform pattern in the buffer based on the ID given then | |
| 493 | // simulate a HID tag until the button is pressed | |
| 494 | void CmdHIDsimTAG(int hi, int lo, int ledcontrol) | |
| 495 | { | |
| ae8e8a43 MHS |
496 | int n=0, i=0; |
| 497 | /* | |
| 498 | HID tag bitstream format | |
| 499 | The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits | |
| 500 | A 1 bit is represented as 6 fc8 and 5 fc10 patterns | |
| 501 | A 0 bit is represented as 5 fc10 and 6 fc8 patterns | |
| 502 | A fc8 is inserted before every 4 bits | |
| 503 | A special start of frame pattern is used consisting a0b0 where a and b are neither 0 | |
| 504 | nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10) | |
| 505 | */ | |
| 506 | ||
| 507 | if (hi>0xFFF) { | |
| 508 | DbpString("Tags can only have 44 bits."); | |
| 509 | return; | |
| 510 | } | |
| 511 | fc(0,&n); | |
| 512 | // special start of frame marker containing invalid bit sequences | |
| 513 | fc(8, &n); fc(8, &n); // invalid | |
| 514 | fc(8, &n); fc(10, &n); // logical 0 | |
| 515 | fc(10, &n); fc(10, &n); // invalid | |
| 516 | fc(8, &n); fc(10, &n); // logical 0 | |
| 517 | ||
| 518 | WDT_HIT(); | |
| 519 | // manchester encode bits 43 to 32 | |
| 520 | for (i=11; i>=0; i--) { | |
| 521 | if ((i%4)==3) fc(0,&n); | |
| 522 | if ((hi>>i)&1) { | |
| 523 | fc(10, &n); fc(8, &n); // low-high transition | |
| 524 | } else { | |
| 525 | fc(8, &n); fc(10, &n); // high-low transition | |
| 526 | } | |
| 527 | } | |
| 528 | ||
| 529 | WDT_HIT(); | |
| 530 | // manchester encode bits 31 to 0 | |
| 531 | for (i=31; i>=0; i--) { | |
| 532 | if ((i%4)==3) fc(0,&n); | |
| 533 | if ((lo>>i)&1) { | |
| 534 | fc(10, &n); fc(8, &n); // low-high transition | |
| 535 | } else { | |
| 536 | fc(8, &n); fc(10, &n); // high-low transition | |
| 537 | } | |
| 538 | } | |
| 539 | ||
| 540 | if (ledcontrol) | |
| 541 | LED_A_ON(); | |
| 542 | SimulateTagLowFrequency(n, 0, ledcontrol); | |
| 543 | ||
| 544 | if (ledcontrol) | |
| 545 | LED_A_OFF(); | |
| 15c4dc5a | 546 | } |
| eb191de6 | 547 | |
| b3b70669 | 548 | // loop to get raw HID waveform then FSK demodulate the TAG ID from it |
| 69d88ec4 MHS |
549 | void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) |
| 550 | { | |
| 117d9ec2 | 551 | uint8_t *dest = BigBuf_get_addr(); |
| 08ebca68 | 552 | const size_t sizeOfBigBuff = BigBuf_max_traceLen(); |
| 553 | size_t size = 0; | |
| ae8e8a43 | 554 | uint32_t hi2=0, hi=0, lo=0; |
| a1d17964 | 555 | int idx=0; |
| ae8e8a43 MHS |
556 | // Configure to go in 125Khz listen mode |
| 557 | LFSetupFPGAForADC(95, true); | |
| 558 | ||
| 559 | while(!BUTTON_PRESS()) { | |
| 560 | ||
| 561 | WDT_HIT(); | |
| 562 | if (ledcontrol) LED_A_ON(); | |
| 563 | ||
| 31abe49f | 564 | DoAcquisition_default(-1,true); |
| ae8e8a43 | 565 | // FSK demodulator |
| 08ebca68 | 566 | size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use |
| a1d17964 | 567 | idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo); |
| 568 | ||
| ec75f5c1 | 569 | if (idx>0 && lo>0){ |
| ae8e8a43 MHS |
570 | // final loop, go over previously decoded manchester data and decode into usable tag ID |
| 571 | // 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0 | |
| 572 | if (hi2 != 0){ //extra large HID tags | |
| 573 | Dbprintf("TAG ID: %x%08x%08x (%d)", | |
| 574 | (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); | |
| 575 | }else { //standard HID tags <38 bits | |
| 576 | //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd | |
| 577 | uint8_t bitlen = 0; | |
| 578 | uint32_t fc = 0; | |
| 579 | uint32_t cardnum = 0; | |
| ba1a299c | 580 | if (((hi>>5)&1) == 1){//if bit 38 is set then < 37 bit format is used |
| ae8e8a43 MHS |
581 | uint32_t lo2=0; |
| 582 | lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit | |
| 583 | uint8_t idx3 = 1; | |
| ba1a299c | 584 | while(lo2 > 1){ //find last bit set to 1 (format len bit) |
| 585 | lo2=lo2 >> 1; | |
| ae8e8a43 MHS |
586 | idx3++; |
| 587 | } | |
| ba1a299c | 588 | bitlen = idx3+19; |
| ae8e8a43 MHS |
589 | fc =0; |
| 590 | cardnum=0; | |
| ba1a299c | 591 | if(bitlen == 26){ |
| ae8e8a43 MHS |
592 | cardnum = (lo>>1)&0xFFFF; |
| 593 | fc = (lo>>17)&0xFF; | |
| 594 | } | |
| ba1a299c | 595 | if(bitlen == 37){ |
| ae8e8a43 MHS |
596 | cardnum = (lo>>1)&0x7FFFF; |
| 597 | fc = ((hi&0xF)<<12)|(lo>>20); | |
| 598 | } | |
| ba1a299c | 599 | if(bitlen == 34){ |
| ae8e8a43 MHS |
600 | cardnum = (lo>>1)&0xFFFF; |
| 601 | fc= ((hi&1)<<15)|(lo>>17); | |
| 602 | } | |
| ba1a299c | 603 | if(bitlen == 35){ |
| ae8e8a43 MHS |
604 | cardnum = (lo>>1)&0xFFFFF; |
| 605 | fc = ((hi&1)<<11)|(lo>>21); | |
| 606 | } | |
| 607 | } | |
| 608 | else { //if bit 38 is not set then 37 bit format is used | |
| 609 | bitlen= 37; | |
| 610 | fc =0; | |
| 611 | cardnum=0; | |
| 612 | if(bitlen==37){ | |
| 613 | cardnum = (lo>>1)&0x7FFFF; | |
| 614 | fc = ((hi&0xF)<<12)|(lo>>20); | |
| 615 | } | |
| 616 | } | |
| 617 | //Dbprintf("TAG ID: %x%08x (%d)", | |
| 618 | // (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); | |
| 619 | Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d", | |
| 620 | (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF, | |
| 621 | (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum); | |
| 622 | } | |
| 623 | if (findone){ | |
| 624 | if (ledcontrol) LED_A_OFF(); | |
| 0892b968 | 625 | *high = hi; |
| 626 | *low = lo; | |
| ae8e8a43 MHS |
627 | return; |
| 628 | } | |
| 629 | // reset | |
| 630 | hi2 = hi = lo = 0; | |
| 631 | } | |
| 632 | WDT_HIT(); | |
| ae8e8a43 MHS |
633 | } |
| 634 | DbpString("Stopped"); | |
| 635 | if (ledcontrol) LED_A_OFF(); | |
| eb191de6 | 636 | } |
| 637 | ||
| 66707a3b | 638 | void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) |
| eb191de6 | 639 | { |
| 117d9ec2 | 640 | uint8_t *dest = BigBuf_get_addr(); |
| ae8e8a43 | 641 | |
| ec75f5c1 | 642 | size_t size=0, idx=0; |
| e770c648 | 643 | int clk=0, invert=0, errCnt=0, maxErr=20; |
| ae8e8a43 MHS |
644 | uint64_t lo=0; |
| 645 | // Configure to go in 125Khz listen mode | |
| 646 | LFSetupFPGAForADC(95, true); | |
| 647 | ||
| 648 | while(!BUTTON_PRESS()) { | |
| 649 | ||
| 650 | WDT_HIT(); | |
| 651 | if (ledcontrol) LED_A_ON(); | |
| 652 | ||
| 31abe49f | 653 | DoAcquisition_default(-1,true); |
| f71f4deb | 654 | size = BigBuf_max_traceLen(); |
| ae8e8a43 | 655 | //Dbprintf("DEBUG: Buffer got"); |
| d91a31f9 | 656 | //askdemod and manchester decode |
| e770c648 | 657 | errCnt = askmandemod(dest, &size, &clk, &invert, maxErr); |
| ae8e8a43 MHS |
658 | //Dbprintf("DEBUG: ASK Got"); |
| 659 | WDT_HIT(); | |
| 660 | ||
| 661 | if (errCnt>=0){ | |
| ec75f5c1 | 662 | lo = Em410xDecode(dest, &size, &idx); |
| ae8e8a43 | 663 | //Dbprintf("DEBUG: EM GOT"); |
| ae8e8a43 | 664 | if (lo>0){ |
| d91a31f9 | 665 | Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)", |
| 666 | (uint32_t)(lo>>32), | |
| 667 | (uint32_t)lo, | |
| 668 | (uint32_t)(lo&0xFFFF), | |
| 669 | (uint32_t)((lo>>16LL) & 0xFF), | |
| 670 | (uint32_t)(lo & 0xFFFFFF)); | |
| ae8e8a43 MHS |
671 | } |
| 672 | if (findone){ | |
| 673 | if (ledcontrol) LED_A_OFF(); | |
| 0892b968 | 674 | *high=lo>>32; |
| 675 | *low=lo & 0xFFFFFFFF; | |
| ae8e8a43 MHS |
676 | return; |
| 677 | } | |
| 678 | } else{ | |
| 679 | //Dbprintf("DEBUG: No Tag"); | |
| 680 | } | |
| 681 | WDT_HIT(); | |
| 682 | lo = 0; | |
| 683 | clk=0; | |
| 684 | invert=0; | |
| 685 | errCnt=0; | |
| 686 | size=0; | |
| ae8e8a43 MHS |
687 | } |
| 688 | DbpString("Stopped"); | |
| 689 | if (ledcontrol) LED_A_OFF(); | |
| 15c4dc5a | 690 | } |
| 69d88ec4 | 691 | |
| a1f3bb12 | 692 | void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) |
| eb191de6 | 693 | { |
| 117d9ec2 | 694 | uint8_t *dest = BigBuf_get_addr(); |
| ae8e8a43 MHS |
695 | int idx=0; |
| 696 | uint32_t code=0, code2=0; | |
| 697 | uint8_t version=0; | |
| 698 | uint8_t facilitycode=0; | |
| 699 | uint16_t number=0; | |
| 700 | // Configure to go in 125Khz listen mode | |
| 701 | LFSetupFPGAForADC(95, true); | |
| 702 | ||
| 703 | while(!BUTTON_PRESS()) { | |
| 704 | WDT_HIT(); | |
| 705 | if (ledcontrol) LED_A_ON(); | |
| 31abe49f | 706 | DoAcquisition_default(-1,true); |
| ae8e8a43 MHS |
707 | //fskdemod and get start index |
| 708 | WDT_HIT(); | |
| f71f4deb | 709 | idx = IOdemodFSK(dest, BigBuf_max_traceLen()); |
| ae8e8a43 MHS |
710 | if (idx>0){ |
| 711 | //valid tag found | |
| 712 | ||
| 713 | //Index map | |
| 714 | //0 10 20 30 40 50 60 | |
| 715 | //| | | | | | | | |
| 716 | //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23 | |
| 717 | //----------------------------------------------------------------------------- | |
| 718 | //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11 | |
| 719 | // | |
| 720 | //XSF(version)facility:codeone+codetwo | |
| 721 | //Handle the data | |
| 722 | if(findone){ //only print binary if we are doing one | |
| 723 | Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]); | |
| 724 | Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]); | |
| 725 | Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]); | |
| 726 | Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]); | |
| 727 | Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]); | |
| 728 | Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]); | |
| 729 | Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]); | |
| 730 | } | |
| 731 | code = bytebits_to_byte(dest+idx,32); | |
| 732 | code2 = bytebits_to_byte(dest+idx+32,32); | |
| 733 | version = bytebits_to_byte(dest+idx+27,8); //14,4 | |
| 734 | facilitycode = bytebits_to_byte(dest+idx+18,8) ; | |
| 735 | number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9 | |
| 736 | ||
| 737 | Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2); | |
| 738 | // if we're only looking for one tag | |
| 739 | if (findone){ | |
| 740 | if (ledcontrol) LED_A_OFF(); | |
| 741 | //LED_A_OFF(); | |
| 0892b968 | 742 | *high=code; |
| 743 | *low=code2; | |
| ae8e8a43 MHS |
744 | return; |
| 745 | } | |
| 746 | code=code2=0; | |
| 747 | version=facilitycode=0; | |
| 748 | number=0; | |
| 749 | idx=0; | |
| 750 | } | |
| 751 | WDT_HIT(); | |
| 752 | } | |
| 753 | DbpString("Stopped"); | |
| 754 | if (ledcontrol) LED_A_OFF(); | |
| eb191de6 | 755 | } |
| a1f3bb12 | 756 | |
| 2d4eae76 | 757 | /*------------------------------ |
| 758 | * T5555/T5557/T5567 routines | |
| 759 | *------------------------------ | |
| 760 | */ | |
| 761 | ||
| 762 | /* T55x7 configuration register definitions */ | |
| 763 | #define T55x7_POR_DELAY 0x00000001 | |
| 764 | #define T55x7_ST_TERMINATOR 0x00000008 | |
| 765 | #define T55x7_PWD 0x00000010 | |
| 766 | #define T55x7_MAXBLOCK_SHIFT 5 | |
| 767 | #define T55x7_AOR 0x00000200 | |
| 768 | #define T55x7_PSKCF_RF_2 0 | |
| 769 | #define T55x7_PSKCF_RF_4 0x00000400 | |
| 770 | #define T55x7_PSKCF_RF_8 0x00000800 | |
| 771 | #define T55x7_MODULATION_DIRECT 0 | |
| 772 | #define T55x7_MODULATION_PSK1 0x00001000 | |
| 773 | #define T55x7_MODULATION_PSK2 0x00002000 | |
| 774 | #define T55x7_MODULATION_PSK3 0x00003000 | |
| 775 | #define T55x7_MODULATION_FSK1 0x00004000 | |
| 776 | #define T55x7_MODULATION_FSK2 0x00005000 | |
| 777 | #define T55x7_MODULATION_FSK1a 0x00006000 | |
| 778 | #define T55x7_MODULATION_FSK2a 0x00007000 | |
| 779 | #define T55x7_MODULATION_MANCHESTER 0x00008000 | |
| 780 | #define T55x7_MODULATION_BIPHASE 0x00010000 | |
| 781 | #define T55x7_BITRATE_RF_8 0 | |
| 782 | #define T55x7_BITRATE_RF_16 0x00040000 | |
| 783 | #define T55x7_BITRATE_RF_32 0x00080000 | |
| 784 | #define T55x7_BITRATE_RF_40 0x000C0000 | |
| 785 | #define T55x7_BITRATE_RF_50 0x00100000 | |
| 786 | #define T55x7_BITRATE_RF_64 0x00140000 | |
| 787 | #define T55x7_BITRATE_RF_100 0x00180000 | |
| 788 | #define T55x7_BITRATE_RF_128 0x001C0000 | |
| 789 | ||
| 790 | /* T5555 (Q5) configuration register definitions */ | |
| 791 | #define T5555_ST_TERMINATOR 0x00000001 | |
| 792 | #define T5555_MAXBLOCK_SHIFT 0x00000001 | |
| 793 | #define T5555_MODULATION_MANCHESTER 0 | |
| 794 | #define T5555_MODULATION_PSK1 0x00000010 | |
| 795 | #define T5555_MODULATION_PSK2 0x00000020 | |
| 796 | #define T5555_MODULATION_PSK3 0x00000030 | |
| 797 | #define T5555_MODULATION_FSK1 0x00000040 | |
| 798 | #define T5555_MODULATION_FSK2 0x00000050 | |
| 799 | #define T5555_MODULATION_BIPHASE 0x00000060 | |
| 800 | #define T5555_MODULATION_DIRECT 0x00000070 | |
| 801 | #define T5555_INVERT_OUTPUT 0x00000080 | |
| 802 | #define T5555_PSK_RF_2 0 | |
| 803 | #define T5555_PSK_RF_4 0x00000100 | |
| 804 | #define T5555_PSK_RF_8 0x00000200 | |
| 805 | #define T5555_USE_PWD 0x00000400 | |
| 806 | #define T5555_USE_AOR 0x00000800 | |
| 807 | #define T5555_BITRATE_SHIFT 12 | |
| 808 | #define T5555_FAST_WRITE 0x00004000 | |
| 809 | #define T5555_PAGE_SELECT 0x00008000 | |
| 810 | ||
| 811 | /* | |
| 812 | * Relevant times in microsecond | |
| 813 | * To compensate antenna falling times shorten the write times | |
| 814 | * and enlarge the gap ones. | |
| 815 | */ | |
| 385f3987 | 816 | #define START_GAP 30*8 // 10 - 50fc 250 |
| 817 | #define WRITE_GAP 20*8 // 8 - 30fc | |
| 818 | #define WRITE_0 24*8 // 16 - 31fc 24fc 192 | |
| 819 | #define WRITE_1 54*8 // 48 - 63fc 54fc 432 for T55x7; 448 for E5550 | |
| 820 | ||
| 821 | // VALUES TAKEN FROM EM4x function: SendForward | |
| 822 | // START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) | |
| 823 | // WRITE_GAP = 128; (16*8) | |
| 824 | // WRITE_1 = 256 32*8; (32*8) | |
| 825 | ||
| 826 | // These timings work for 4469/4269/4305 (with the 55*8 above) | |
| 827 | // WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); | |
| 828 | ||
| 829 | #define T55xx_SAMPLES_SIZE 12000 // 32 x 32 x 10 (32 bit times numofblock (7), times clock skip..) | |
| 2d4eae76 | 830 | |
| 831 | // Write one bit to card | |
| 832 | void T55xxWriteBit(int bit) | |
| ec09b62d | 833 | { |
| ae8e8a43 MHS |
834 | FpgaDownloadAndGo(FPGA_BITSTREAM_LF); |
| 835 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
| 836 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); | |
| 385f3987 | 837 | if (!bit) |
| ae8e8a43 MHS |
838 | SpinDelayUs(WRITE_0); |
| 839 | else | |
| 840 | SpinDelayUs(WRITE_1); | |
| 841 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 842 | SpinDelayUs(WRITE_GAP); | |
| ec09b62d | 843 | } |
| 844 | ||
| 2d4eae76 | 845 | // Write one card block in page 0, no lock |
| 54a942b0 | 846 | void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode) |
| ec09b62d | 847 | { |
| 385f3987 | 848 | uint32_t i = 0; |
| ae8e8a43 | 849 | |
| 385f3987 | 850 | // Set up FPGA, 125kHz |
| 851 | // Wait for config.. (192+8190xPOW)x8 == 67ms | |
| 852 | LFSetupFPGAForADC(0, true); | |
| ae8e8a43 MHS |
853 | |
| 854 | // Now start writting | |
| 855 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| 856 | SpinDelayUs(START_GAP); | |
| 857 | ||
| 858 | // Opcode | |
| 859 | T55xxWriteBit(1); | |
| 860 | T55xxWriteBit(0); //Page 0 | |
| 861 | if (PwdMode == 1){ | |
| 862 | // Pwd | |
| 863 | for (i = 0x80000000; i != 0; i >>= 1) | |
| 864 | T55xxWriteBit(Pwd & i); | |
| 865 | } | |
| 866 | // Lock bit | |
| 867 | T55xxWriteBit(0); | |
| 868 | ||
| 869 | // Data | |
| 54a942b0 | 870 | for (i = 0x80000000; i != 0; i >>= 1) |
| ae8e8a43 MHS |
871 | T55xxWriteBit(Data & i); |
| 872 | ||
| 873 | // Block | |
| 874 | for (i = 0x04; i != 0; i >>= 1) | |
| 875 | T55xxWriteBit(Block & i); | |
| 876 | ||
| 877 | // Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550, | |
| 878 | // so wait a little more) | |
| 879 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
| 880 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); | |
| 881 | SpinDelay(20); | |
| 882 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); | |
| ec09b62d | 883 | } |
| 884 | ||
| 54a942b0 | 885 | // Read one card block in page 0 |
| 886 | void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) | |
| ec09b62d | 887 | { |
| 117d9ec2 | 888 | uint8_t *dest = BigBuf_get_addr(); |
| 385f3987 | 889 | //uint16_t bufferlength = BigBuf_max_traceLen(); |
| 890 | uint16_t bufferlength = T55xx_SAMPLES_SIZE; | |
| 891 | uint32_t i = 0; | |
| 892 | // Clear destination buffer before sending the command 0x80 = average. | |
| 893 | memset(dest, 0x80, bufferlength); | |
| 894 | ||
| 895 | // Set up FPGA, 125kHz | |
| 896 | // Wait for config.. (192+8190xPOW)x8 == 67ms | |
| 897 | LFSetupFPGAForADC(0, true); | |
| ae8e8a43 MHS |
898 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); |
| 899 | SpinDelayUs(START_GAP); | |
| 900 | ||
| 901 | // Opcode | |
| 902 | T55xxWriteBit(1); | |
| 903 | T55xxWriteBit(0); //Page 0 | |
| 904 | if (PwdMode == 1){ | |
| 905 | // Pwd | |
| 906 | for (i = 0x80000000; i != 0; i >>= 1) | |
| 907 | T55xxWriteBit(Pwd & i); | |
| 908 | } | |
| 909 | // Lock bit | |
| 910 | T55xxWriteBit(0); | |
| 911 | // Block | |
| 912 | for (i = 0x04; i != 0; i >>= 1) | |
| 913 | T55xxWriteBit(Block & i); | |
| 914 | ||
| 915 | // Turn field on to read the response | |
| 385f3987 | 916 | TurnReadLFOn(); |
| ae8e8a43 MHS |
917 | |
| 918 | // Now do the acquisition | |
| 919 | i = 0; | |
| 920 | for(;;) { | |
| 921 | if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { | |
| 922 | AT91C_BASE_SSC->SSC_THR = 0x43; | |
| 385f3987 | 923 | //AT91C_BASE_SSC->SSC_THR = 0xff; |
| 924 | LED_D_ON(); | |
| ae8e8a43 MHS |
925 | } |
| 926 | if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { | |
| 927 | dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; | |
| 385f3987 | 928 | ++i; |
| 929 | LED_D_OFF(); | |
| 930 | if (i >= bufferlength) break; | |
| ae8e8a43 MHS |
931 | } |
| 932 | } | |
| 933 | ||
| 385f3987 | 934 | cmd_send(CMD_ACK,0,0,0,0,0); |
| ae8e8a43 MHS |
935 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off |
| 936 | LED_D_OFF(); | |
| 54a942b0 | 937 | } |
| 2d4eae76 | 938 | |
| 54a942b0 | 939 | // Read card traceability data (page 1) |
| 940 | void T55xxReadTrace(void){ | |
| 117d9ec2 | 941 | uint8_t *dest = BigBuf_get_addr(); |
| 385f3987 | 942 | //uint16_t bufferlength = BigBuf_max_traceLen(); |
| 943 | uint16_t bufferlength = T55xx_SAMPLES_SIZE; | |
| 944 | uint32_t i = 0; | |
| 945 | ||
| 946 | // Clear destination buffer before sending the command 0x80 = average | |
| 947 | memset(dest, 0x80, bufferlength); | |
| 948 | ||
| 949 | LFSetupFPGAForADC(0, true); | |
| ae8e8a43 MHS |
950 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); |
| 951 | SpinDelayUs(START_GAP); | |
| 952 | ||
| 953 | // Opcode | |
| 954 | T55xxWriteBit(1); | |
| 955 | T55xxWriteBit(1); //Page 1 | |
| 956 | ||
| 957 | // Turn field on to read the response | |
| 385f3987 | 958 | TurnReadLFOn(); |
| ae8e8a43 MHS |
959 | |
| 960 | // Now do the acquisition | |
| ae8e8a43 MHS |
961 | for(;;) { |
| 962 | if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { | |
| 963 | AT91C_BASE_SSC->SSC_THR = 0x43; | |
| 385f3987 | 964 | LED_D_ON(); |
| ae8e8a43 MHS |
965 | } |
| 966 | if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { | |
| 967 | dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; | |
| 385f3987 | 968 | ++i; |
| 969 | LED_D_OFF(); | |
| 970 | ||
| 971 | if (i >= bufferlength) break; | |
| 972 | } | |
| 973 | } | |
| 974 | ||
| 975 | cmd_send(CMD_ACK,0,0,0,0,0); | |
| ae8e8a43 MHS |
976 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off |
| 977 | LED_D_OFF(); | |
| 385f3987 | 978 | } |
| 979 | ||
| 980 | void TurnReadLFOn(){ | |
| 981 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
| 982 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); | |
| 983 | // Give it a bit of time for the resonant antenna to settle. | |
| 984 | //SpinDelay(30); | |
| 0310364d | 985 | SpinDelayUs(9*150); |
| 54a942b0 | 986 | } |
| ec09b62d | 987 | |
| 54a942b0 | 988 | /*-------------- Cloning routines -----------*/ |
| 989 | // Copy HID id to card and setup block 0 config | |
| 990 | void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) | |
| 991 | { | |
| ae8e8a43 MHS |
992 | int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format |
| 993 | int last_block = 0; | |
| 994 | ||
| 995 | if (longFMT){ | |
| 996 | // Ensure no more than 84 bits supplied | |
| 997 | if (hi2>0xFFFFF) { | |
| 998 | DbpString("Tags can only have 84 bits."); | |
| 999 | return; | |
| 1000 | } | |
| 1001 | // Build the 6 data blocks for supplied 84bit ID | |
| 1002 | last_block = 6; | |
| 1003 | data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded) | |
| 1004 | for (int i=0;i<4;i++) { | |
| 1005 | if (hi2 & (1<<(19-i))) | |
| 1006 | data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10 | |
| 1007 | else | |
| 1008 | data1 |= (1<<((3-i)*2)); // 0 -> 01 | |
| 1009 | } | |
| 1010 | ||
| 1011 | data2 = 0; | |
| 1012 | for (int i=0;i<16;i++) { | |
| 1013 | if (hi2 & (1<<(15-i))) | |
| 1014 | data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1015 | else | |
| 1016 | data2 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1017 | } | |
| 1018 | ||
| 1019 | data3 = 0; | |
| 1020 | for (int i=0;i<16;i++) { | |
| 1021 | if (hi & (1<<(31-i))) | |
| 1022 | data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1023 | else | |
| 1024 | data3 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1025 | } | |
| 1026 | ||
| 1027 | data4 = 0; | |
| 1028 | for (int i=0;i<16;i++) { | |
| 1029 | if (hi & (1<<(15-i))) | |
| 1030 | data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1031 | else | |
| 1032 | data4 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1033 | } | |
| 1034 | ||
| 1035 | data5 = 0; | |
| 1036 | for (int i=0;i<16;i++) { | |
| 1037 | if (lo & (1<<(31-i))) | |
| 1038 | data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1039 | else | |
| 1040 | data5 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1041 | } | |
| 1042 | ||
| 1043 | data6 = 0; | |
| 1044 | for (int i=0;i<16;i++) { | |
| 1045 | if (lo & (1<<(15-i))) | |
| 1046 | data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1047 | else | |
| 1048 | data6 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1049 | } | |
| 54a942b0 | 1050 | } |
| ae8e8a43 MHS |
1051 | else { |
| 1052 | // Ensure no more than 44 bits supplied | |
| 1053 | if (hi>0xFFF) { | |
| 1054 | DbpString("Tags can only have 44 bits."); | |
| 1055 | return; | |
| 1056 | } | |
| 1057 | ||
| 1058 | // Build the 3 data blocks for supplied 44bit ID | |
| 1059 | last_block = 3; | |
| 1060 | ||
| 1061 | data1 = 0x1D000000; // load preamble | |
| 1062 | ||
| 1063 | for (int i=0;i<12;i++) { | |
| 1064 | if (hi & (1<<(11-i))) | |
| 1065 | data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10 | |
| 1066 | else | |
| 1067 | data1 |= (1<<((11-i)*2)); // 0 -> 01 | |
| 1068 | } | |
| 1069 | ||
| 1070 | data2 = 0; | |
| 1071 | for (int i=0;i<16;i++) { | |
| 1072 | if (lo & (1<<(31-i))) | |
| 1073 | data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1074 | else | |
| 1075 | data2 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1076 | } | |
| 1077 | ||
| 1078 | data3 = 0; | |
| 1079 | for (int i=0;i<16;i++) { | |
| 1080 | if (lo & (1<<(15-i))) | |
| 1081 | data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10 | |
| 1082 | else | |
| 1083 | data3 |= (1<<((15-i)*2)); // 0 -> 01 | |
| 1084 | } | |
| 54a942b0 | 1085 | } |
| ae8e8a43 MHS |
1086 | |
| 1087 | LED_D_ON(); | |
| 1088 | // Program the data blocks for supplied ID | |
| 1089 | // and the block 0 for HID format | |
| 1090 | T55xxWriteBlock(data1,1,0,0); | |
| 1091 | T55xxWriteBlock(data2,2,0,0); | |
| 1092 | T55xxWriteBlock(data3,3,0,0); | |
| 1093 | ||
| 1094 | if (longFMT) { // if long format there are 6 blocks | |
| 1095 | T55xxWriteBlock(data4,4,0,0); | |
| 1096 | T55xxWriteBlock(data5,5,0,0); | |
| 1097 | T55xxWriteBlock(data6,6,0,0); | |
| 54a942b0 | 1098 | } |
| ae8e8a43 MHS |
1099 | |
| 1100 | // Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long) | |
| 1101 | T55xxWriteBlock(T55x7_BITRATE_RF_50 | | |
| 1102 | T55x7_MODULATION_FSK2a | | |
| 1103 | last_block << T55x7_MAXBLOCK_SHIFT, | |
| 1104 | 0,0,0); | |
| 1105 | ||
| 1106 | LED_D_OFF(); | |
| 1107 | ||
| 1108 | DbpString("DONE!"); | |
| 2d4eae76 | 1109 | } |
| ec09b62d | 1110 | |
| a1f3bb12 | 1111 | void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT) |
| 1112 | { | |
| ae8e8a43 MHS |
1113 | int data1=0, data2=0; //up to six blocks for long format |
| 1114 | ||
| a1f3bb12 | 1115 | data1 = hi; // load preamble |
| 1116 | data2 = lo; | |
| ba1a299c | 1117 | |
| a1f3bb12 | 1118 | LED_D_ON(); |
| 1119 | // Program the data blocks for supplied ID | |
| 1120 | // and the block 0 for HID format | |
| 1121 | T55xxWriteBlock(data1,1,0,0); | |
| 1122 | T55xxWriteBlock(data2,2,0,0); | |
| ae8e8a43 | 1123 | |
| a1f3bb12 | 1124 | //Config Block |
| 1125 | T55xxWriteBlock(0x00147040,0,0,0); | |
| 1126 | LED_D_OFF(); | |
| ae8e8a43 | 1127 | |
| a1f3bb12 | 1128 | DbpString("DONE!"); |
| 1129 | } | |
| 1130 | ||
| 2d4eae76 | 1131 | // Define 9bit header for EM410x tags |
| 1132 | #define EM410X_HEADER 0x1FF | |
| 1133 | #define EM410X_ID_LENGTH 40 | |
| ec09b62d | 1134 | |
| 2d4eae76 | 1135 | void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) |
| 1136 | { | |
| ae8e8a43 MHS |
1137 | int i, id_bit; |
| 1138 | uint64_t id = EM410X_HEADER; | |
| 1139 | uint64_t rev_id = 0; // reversed ID | |
| 1140 | int c_parity[4]; // column parity | |
| 1141 | int r_parity = 0; // row parity | |
| 1142 | uint32_t clock = 0; | |
| 1143 | ||
| 1144 | // Reverse ID bits given as parameter (for simpler operations) | |
| 1145 | for (i = 0; i < EM410X_ID_LENGTH; ++i) { | |
| 1146 | if (i < 32) { | |
| 1147 | rev_id = (rev_id << 1) | (id_lo & 1); | |
| 1148 | id_lo >>= 1; | |
| 1149 | } else { | |
| 1150 | rev_id = (rev_id << 1) | (id_hi & 1); | |
| 1151 | id_hi >>= 1; | |
| 1152 | } | |
| 1153 | } | |
| 1154 | ||
| 1155 | for (i = 0; i < EM410X_ID_LENGTH; ++i) { | |
| 1156 | id_bit = rev_id & 1; | |
| 1157 | ||
| 1158 | if (i % 4 == 0) { | |
| 1159 | // Don't write row parity bit at start of parsing | |
| 1160 | if (i) | |
| 1161 | id = (id << 1) | r_parity; | |
| 1162 | // Start counting parity for new row | |
| 1163 | r_parity = id_bit; | |
| 1164 | } else { | |
| 1165 | // Count row parity | |
| 1166 | r_parity ^= id_bit; | |
| 1167 | } | |
| 1168 | ||
| 1169 | // First elements in column? | |
| 1170 | if (i < 4) | |
| 1171 | // Fill out first elements | |
| 1172 | c_parity[i] = id_bit; | |
| 1173 | else | |
| 1174 | // Count column parity | |
| 1175 | c_parity[i % 4] ^= id_bit; | |
| 1176 | ||
| 1177 | // Insert ID bit | |
| 1178 | id = (id << 1) | id_bit; | |
| 1179 | rev_id >>= 1; | |
| 1180 | } | |
| 1181 | ||
| 1182 | // Insert parity bit of last row | |
| 1183 | id = (id << 1) | r_parity; | |
| 1184 | ||
| 1185 | // Fill out column parity at the end of tag | |
| 1186 | for (i = 0; i < 4; ++i) | |
| 1187 | id = (id << 1) | c_parity[i]; | |
| 1188 | ||
| 1189 | // Add stop bit | |
| 1190 | id <<= 1; | |
| 1191 | ||
| 1192 | Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555"); | |
| 1193 | LED_D_ON(); | |
| 1194 | ||
| 1195 | // Write EM410x ID | |
| 1196 | T55xxWriteBlock((uint32_t)(id >> 32), 1, 0, 0); | |
| 1197 | T55xxWriteBlock((uint32_t)id, 2, 0, 0); | |
| 1198 | ||
| 1199 | // Config for EM410x (RF/64, Manchester, Maxblock=2) | |
| 1200 | if (card) { | |
| 1201 | // Clock rate is stored in bits 8-15 of the card value | |
| 1202 | clock = (card & 0xFF00) >> 8; | |
| 1203 | Dbprintf("Clock rate: %d", clock); | |
| 1204 | switch (clock) | |
| 1205 | { | |
| 1206 | case 32: | |
| 1207 | clock = T55x7_BITRATE_RF_32; | |
| 1208 | break; | |
| 1209 | case 16: | |
| 1210 | clock = T55x7_BITRATE_RF_16; | |
| 1211 | break; | |
| 1212 | case 0: | |
| 1213 | // A value of 0 is assumed to be 64 for backwards-compatibility | |
| 1214 | // Fall through... | |
| 1215 | case 64: | |
| 1216 | clock = T55x7_BITRATE_RF_64; | |
| 1217 | break; | |
| 1218 | default: | |
| 1219 | Dbprintf("Invalid clock rate: %d", clock); | |
| 1220 | return; | |
| 1221 | } | |
| 1222 | ||
| 1223 | // Writing configuration for T55x7 tag | |
| 1224 | T55xxWriteBlock(clock | | |
| 1225 | T55x7_MODULATION_MANCHESTER | | |
| 1226 | 2 << T55x7_MAXBLOCK_SHIFT, | |
| 1227 | 0, 0, 0); | |
| 1228 | } | |
| 1229 | else | |
| 1230 | // Writing configuration for T5555(Q5) tag | |
| 1231 | T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT | | |
| 1232 | T5555_MODULATION_MANCHESTER | | |
| 1233 | 2 << T5555_MAXBLOCK_SHIFT, | |
| 1234 | 0, 0, 0); | |
| 1235 | ||
| 1236 | LED_D_OFF(); | |
| 1237 | Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555", | |
| 1238 | (uint32_t)(id >> 32), (uint32_t)id); | |
| 2d4eae76 | 1239 | } |
| 2414f978 | 1240 | |
| 1241 | // Clone Indala 64-bit tag by UID to T55x7 | |
| 1242 | void CopyIndala64toT55x7(int hi, int lo) | |
| 1243 | { | |
| 2414f978 | 1244 | |
| ae8e8a43 MHS |
1245 | //Program the 2 data blocks for supplied 64bit UID |
| 1246 | // and the block 0 for Indala64 format | |
| 1247 | T55xxWriteBlock(hi,1,0,0); | |
| 1248 | T55xxWriteBlock(lo,2,0,0); | |
| 1249 | //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2) | |
| 1250 | T55xxWriteBlock(T55x7_BITRATE_RF_32 | | |
| 1251 | T55x7_MODULATION_PSK1 | | |
| 1252 | 2 << T55x7_MAXBLOCK_SHIFT, | |
| 1253 | 0, 0, 0); | |
| 1254 | //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data) | |
| 1255 | // T5567WriteBlock(0x603E1042,0); | |
| 2414f978 | 1256 | |
| ae8e8a43 | 1257 | DbpString("DONE!"); |
| 4118b74d | 1258 | |
| ba1a299c | 1259 | } |
| 2414f978 | 1260 | |
| 1261 | void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7) | |
| 1262 | { | |
| ae8e8a43 | 1263 | |
| ae8e8a43 MHS |
1264 | //Program the 7 data blocks for supplied 224bit UID |
| 1265 | // and the block 0 for Indala224 format | |
| 1266 | T55xxWriteBlock(uid1,1,0,0); | |
| 1267 | T55xxWriteBlock(uid2,2,0,0); | |
| 1268 | T55xxWriteBlock(uid3,3,0,0); | |
| 1269 | T55xxWriteBlock(uid4,4,0,0); | |
| 1270 | T55xxWriteBlock(uid5,5,0,0); | |
| 1271 | T55xxWriteBlock(uid6,6,0,0); | |
| 1272 | T55xxWriteBlock(uid7,7,0,0); | |
| 1273 | //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7) | |
| 1274 | T55xxWriteBlock(T55x7_BITRATE_RF_32 | | |
| 1275 | T55x7_MODULATION_PSK1 | | |
| 1276 | 7 << T55x7_MAXBLOCK_SHIFT, | |
| 1277 | 0,0,0); | |
| 1278 | //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data) | |
| 1279 | // T5567WriteBlock(0x603E10E2,0); | |
| 1280 | ||
| 1281 | DbpString("DONE!"); | |
| 4118b74d | 1282 | |
| 2414f978 | 1283 | } |
| 54a942b0 | 1284 | |
| 1285 | ||
| 1286 | #define abs(x) ( ((x)<0) ? -(x) : (x) ) | |
| 1287 | #define max(x,y) ( x<y ? y:x) | |
| 1288 | ||
| 1289 | int DemodPCF7931(uint8_t **outBlocks) { | |
| ae8e8a43 MHS |
1290 | uint8_t BitStream[256]; |
| 1291 | uint8_t Blocks[8][16]; | |
| 117d9ec2 | 1292 | uint8_t *GraphBuffer = BigBuf_get_addr(); |
| f71f4deb | 1293 | int GraphTraceLen = BigBuf_max_traceLen(); |
| ae8e8a43 MHS |
1294 | int i, j, lastval, bitidx, half_switch; |
| 1295 | int clock = 64; | |
| 1296 | int tolerance = clock / 8; | |
| 1297 | int pmc, block_done; | |
| 1298 | int lc, warnings = 0; | |
| 1299 | int num_blocks = 0; | |
| 1300 | int lmin=128, lmax=128; | |
| 1301 | uint8_t dir; | |
| 1302 | ||
| 31abe49f MHS |
1303 | LFSetupFPGAForADC(95, true); |
| 1304 | DoAcquisition_default(0, 0); | |
| 1305 | ||
| ae8e8a43 MHS |
1306 | |
| 1307 | lmin = 64; | |
| 1308 | lmax = 192; | |
| 1309 | ||
| 1310 | i = 2; | |
| 1311 | ||
| 1312 | /* Find first local max/min */ | |
| 1313 | if(GraphBuffer[1] > GraphBuffer[0]) { | |
| 1314 | while(i < GraphTraceLen) { | |
| 1315 | if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax) | |
| 1316 | break; | |
| 1317 | i++; | |
| 1318 | } | |
| 1319 | dir = 0; | |
| 54a942b0 | 1320 | } |
| ae8e8a43 MHS |
1321 | else { |
| 1322 | while(i < GraphTraceLen) { | |
| 1323 | if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin) | |
| 1324 | break; | |
| 1325 | i++; | |
| 1326 | } | |
| 1327 | dir = 1; | |
| 54a942b0 | 1328 | } |
| ae8e8a43 MHS |
1329 | |
| 1330 | lastval = i++; | |
| 1331 | half_switch = 0; | |
| 1332 | pmc = 0; | |
| 1333 | block_done = 0; | |
| 1334 | ||
| 1335 | for (bitidx = 0; i < GraphTraceLen; i++) | |
| 1336 | { | |
| 1337 | if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin)) | |
| 1338 | { | |
| 1339 | lc = i - lastval; | |
| 1340 | lastval = i; | |
| 1341 | ||
| 1342 | // Switch depending on lc length: | |
| 1343 | // Tolerance is 1/8 of clock rate (arbitrary) | |
| 1344 | if (abs(lc-clock/4) < tolerance) { | |
| 1345 | // 16T0 | |
| 1346 | if((i - pmc) == lc) { /* 16T0 was previous one */ | |
| 1347 | /* It's a PMC ! */ | |
| 1348 | i += (128+127+16+32+33+16)-1; | |
| 1349 | lastval = i; | |
| 1350 | pmc = 0; | |
| 1351 | block_done = 1; | |
| 1352 | } | |
| 1353 | else { | |
| 1354 | pmc = i; | |
| 1355 | } | |
| 1356 | } else if (abs(lc-clock/2) < tolerance) { | |
| 1357 | // 32TO | |
| 1358 | if((i - pmc) == lc) { /* 16T0 was previous one */ | |
| 1359 | /* It's a PMC ! */ | |
| 1360 | i += (128+127+16+32+33)-1; | |
| 1361 | lastval = i; | |
| 1362 | pmc = 0; | |
| 1363 | block_done = 1; | |
| 1364 | } | |
| 1365 | else if(half_switch == 1) { | |
| 1366 | BitStream[bitidx++] = 0; | |
| 1367 | half_switch = 0; | |
| 1368 | } | |
| 1369 | else | |
| 1370 | half_switch++; | |
| 1371 | } else if (abs(lc-clock) < tolerance) { | |
| 1372 | // 64TO | |
| 1373 | BitStream[bitidx++] = 1; | |
| 1374 | } else { | |
| 1375 | // Error | |
| 1376 | warnings++; | |
| 1377 | if (warnings > 10) | |
| 1378 | { | |
| 1379 | Dbprintf("Error: too many detection errors, aborting."); | |
| 1380 | return 0; | |
| 1381 | } | |
| 1382 | } | |
| 1383 | ||
| 1384 | if(block_done == 1) { | |
| 1385 | if(bitidx == 128) { | |
| 1386 | for(j=0; j<16; j++) { | |
| 1387 | Blocks[num_blocks][j] = 128*BitStream[j*8+7]+ | |
| 1388 | 64*BitStream[j*8+6]+ | |
| 1389 | 32*BitStream[j*8+5]+ | |
| 1390 | 16*BitStream[j*8+4]+ | |
| 1391 | 8*BitStream[j*8+3]+ | |
| 1392 | 4*BitStream[j*8+2]+ | |
| 1393 | 2*BitStream[j*8+1]+ | |
| 1394 | BitStream[j*8]; | |
| 1395 | } | |
| 1396 | num_blocks++; | |
| 1397 | } | |
| 1398 | bitidx = 0; | |
| 1399 | block_done = 0; | |
| 1400 | half_switch = 0; | |
| 1401 | } | |
| 1402 | if(i < GraphTraceLen) | |
| 1403 | { | |
| 1404 | if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0; | |
| 1405 | else dir = 1; | |
| 1406 | } | |
| 1407 | } | |
| 1408 | if(bitidx==255) | |
| 1409 | bitidx=0; | |
| 1410 | warnings = 0; | |
| 1411 | if(num_blocks == 4) break; | |
| 1412 | } | |
| 1413 | memcpy(outBlocks, Blocks, 16*num_blocks); | |
| 1414 | return num_blocks; | |
| 54a942b0 | 1415 | } |
| 1416 | ||
| 1417 | int IsBlock0PCF7931(uint8_t *Block) { | |
| ae8e8a43 MHS |
1418 | // Assume RFU means 0 :) |
| 1419 | if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled | |
| 1420 | return 1; | |
| 1421 | if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ? | |
| 1422 | return 1; | |
| 1423 | return 0; | |
| 54a942b0 | 1424 | } |
| 1425 | ||
| 1426 | int IsBlock1PCF7931(uint8_t *Block) { | |
| ae8e8a43 MHS |
1427 | // Assume RFU means 0 :) |
| 1428 | if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0) | |
| 1429 | if((Block[14] & 0x7f) <= 9 && Block[15] <= 9) | |
| 1430 | return 1; | |
| 1431 | ||
| 1432 | return 0; | |
| 54a942b0 | 1433 | } |
| d91a31f9 | 1434 | |
| 54a942b0 | 1435 | #define ALLOC 16 |
| 1436 | ||
| 1437 | void ReadPCF7931() { | |
| ae8e8a43 MHS |
1438 | uint8_t Blocks[8][17]; |
| 1439 | uint8_t tmpBlocks[4][16]; | |
| 1440 | int i, j, ind, ind2, n; | |
| 1441 | int num_blocks = 0; | |
| 1442 | int max_blocks = 8; | |
| 1443 | int ident = 0; | |
| 1444 | int error = 0; | |
| 1445 | int tries = 0; | |
| 1446 | ||
| 1447 | memset(Blocks, 0, 8*17*sizeof(uint8_t)); | |
| 1448 | ||
| 1449 | do { | |
| 1450 | memset(tmpBlocks, 0, 4*16*sizeof(uint8_t)); | |
| 1451 | n = DemodPCF7931((uint8_t**)tmpBlocks); | |
| 1452 | if(!n) | |
| 1453 | error++; | |
| 1454 | if(error==10 && num_blocks == 0) { | |
| 1455 | Dbprintf("Error, no tag or bad tag"); | |
| 1456 | return; | |
| 54a942b0 | 1457 | } |
| ae8e8a43 MHS |
1458 | else if (tries==20 || error==10) { |
| 1459 | Dbprintf("Error reading the tag"); | |
| 1460 | Dbprintf("Here is the partial content"); | |
| 1461 | goto end; | |
| 1462 | } | |
| 1463 | ||
| 1464 | for(i=0; i<n; i++) | |
| 1465 | Dbprintf("(dbg) %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", | |
| 1466 | tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7], | |
| 1467 | tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]); | |
| 1468 | if(!ident) { | |
| 1469 | for(i=0; i<n; i++) { | |
| 1470 | if(IsBlock0PCF7931(tmpBlocks[i])) { | |
| 1471 | // Found block 0 ? | |
| 1472 | if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) { | |
| 1473 | // Found block 1! | |
| 1474 | // \o/ | |
| 1475 | ident = 1; | |
| 1476 | memcpy(Blocks[0], tmpBlocks[i], 16); | |
| 1477 | Blocks[0][ALLOC] = 1; | |
| 1478 | memcpy(Blocks[1], tmpBlocks[i+1], 16); | |
| 1479 | Blocks[1][ALLOC] = 1; | |
| 1480 | max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1; | |
| 1481 | // Debug print | |
| 1482 | Dbprintf("(dbg) Max blocks: %d", max_blocks); | |
| 1483 | num_blocks = 2; | |
| 1484 | // Handle following blocks | |
| 1485 | for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) { | |
| 1486 | if(j==n) j=0; | |
| 1487 | if(j==i) break; | |
| 1488 | memcpy(Blocks[ind2], tmpBlocks[j], 16); | |
| 1489 | Blocks[ind2][ALLOC] = 1; | |
| 1490 | } | |
| 1491 | break; | |
| 1492 | } | |
| 54a942b0 | 1493 | } |
| ae8e8a43 MHS |
1494 | } |
| 1495 | } | |
| 1496 | else { | |
| 1497 | for(i=0; i<n; i++) { // Look for identical block in known blocks | |
| 1498 | if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00 | |
| 1499 | for(j=0; j<max_blocks; j++) { | |
| 1500 | if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) { | |
| 1501 | // Found an identical block | |
| 1502 | for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) { | |
| 1503 | if(ind2 < 0) | |
| 1504 | ind2 = max_blocks; | |
| 1505 | if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found | |
| 1506 | // Dbprintf("Tmp %d -> Block %d", ind, ind2); | |
| 1507 | memcpy(Blocks[ind2], tmpBlocks[ind], 16); | |
| 1508 | Blocks[ind2][ALLOC] = 1; | |
| 1509 | num_blocks++; | |
| 1510 | if(num_blocks == max_blocks) goto end; | |
| 1511 | } | |
| 1512 | } | |
| 1513 | for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) { | |
| 1514 | if(ind2 > max_blocks) | |
| 1515 | ind2 = 0; | |
| 1516 | if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found | |
| 1517 | // Dbprintf("Tmp %d -> Block %d", ind, ind2); | |
| 1518 | memcpy(Blocks[ind2], tmpBlocks[ind], 16); | |
| 1519 | Blocks[ind2][ALLOC] = 1; | |
| 1520 | num_blocks++; | |
| 1521 | if(num_blocks == max_blocks) goto end; | |
| 1522 | } | |
| 1523 | } | |
| 1524 | } | |
| 1525 | } | |
| 54a942b0 | 1526 | } |
| 54a942b0 | 1527 | } |
| 54a942b0 | 1528 | } |
| ae8e8a43 MHS |
1529 | tries++; |
| 1530 | if (BUTTON_PRESS()) return; | |
| 1531 | } while (num_blocks != max_blocks); | |
| 54a942b0 | 1532 | end: |
| ae8e8a43 MHS |
1533 | Dbprintf("-----------------------------------------"); |
| 1534 | Dbprintf("Memory content:"); | |
| 1535 | Dbprintf("-----------------------------------------"); | |
| 1536 | for(i=0; i<max_blocks; i++) { | |
| 1537 | if(Blocks[i][ALLOC]==1) | |
| 1538 | Dbprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", | |
| 1539 | Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7], | |
| 1540 | Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]); | |
| 1541 | else | |
| 1542 | Dbprintf("<missing block %d>", i); | |
| 1543 | } | |
| 1544 | Dbprintf("-----------------------------------------"); | |
| 1545 | ||
| 1546 | return ; | |
| 54a942b0 | 1547 | } |
| 1548 | ||
| 1549 | ||
| 1550 | //----------------------------------- | |
| 1551 | // EM4469 / EM4305 routines | |
| 1552 | //----------------------------------- | |
| 1553 | #define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored | |
| 1554 | #define FWD_CMD_WRITE 0xA | |
| 1555 | #define FWD_CMD_READ 0x9 | |
| 1556 | #define FWD_CMD_DISABLE 0x5 | |
| 1557 | ||
| 1558 | ||
| 1559 | uint8_t forwardLink_data[64]; //array of forwarded bits | |
| 1560 | uint8_t * forward_ptr; //ptr for forward message preparation | |
| 1561 | uint8_t fwd_bit_sz; //forwardlink bit counter | |
| 1562 | uint8_t * fwd_write_ptr; //forwardlink bit pointer | |
| 1563 | ||
| 1564 | //==================================================================== | |
| 1565 | // prepares command bits | |
| 1566 | // see EM4469 spec | |
| 1567 | //==================================================================== | |
| 1568 | //-------------------------------------------------------------------- | |
| 1569 | uint8_t Prepare_Cmd( uint8_t cmd ) { | |
| ae8e8a43 MHS |
1570 | //-------------------------------------------------------------------- |
| 1571 | ||
| 1572 | *forward_ptr++ = 0; //start bit | |
| 1573 | *forward_ptr++ = 0; //second pause for 4050 code | |
| 1574 | ||
| 1575 | *forward_ptr++ = cmd; | |
| 1576 | cmd >>= 1; | |
| 1577 | *forward_ptr++ = cmd; | |
| 1578 | cmd >>= 1; | |
| 1579 | *forward_ptr++ = cmd; | |
| 1580 | cmd >>= 1; | |
| 1581 | *forward_ptr++ = cmd; | |
| 1582 | ||
| 1583 | return 6; //return number of emited bits | |
| 54a942b0 | 1584 | } |
| 1585 | ||
| 1586 | //==================================================================== | |
| 1587 | // prepares address bits | |
| 1588 | // see EM4469 spec | |
| 1589 | //==================================================================== | |
| 1590 | ||
| 1591 | //-------------------------------------------------------------------- | |
| 1592 | uint8_t Prepare_Addr( uint8_t addr ) { | |
| ae8e8a43 MHS |
1593 | //-------------------------------------------------------------------- |
| 1594 | ||
| 1595 | register uint8_t line_parity; | |
| 1596 | ||
| 1597 | uint8_t i; | |
| 1598 | line_parity = 0; | |
| 1599 | for(i=0;i<6;i++) { | |
| 1600 | *forward_ptr++ = addr; | |
| 1601 | line_parity ^= addr; | |
| 1602 | addr >>= 1; | |
| 1603 | } | |
| 1604 | ||
| 1605 | *forward_ptr++ = (line_parity & 1); | |
| 1606 | ||
| 1607 | return 7; //return number of emited bits | |
| 54a942b0 | 1608 | } |
| 1609 | ||
| 1610 | //==================================================================== | |
| 1611 | // prepares data bits intreleaved with parity bits | |
| 1612 | // see EM4469 spec | |
| 1613 | //==================================================================== | |
| 1614 | ||
| 1615 | //-------------------------------------------------------------------- | |
| 1616 | uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) { | |
| ae8e8a43 MHS |
1617 | //-------------------------------------------------------------------- |
| 1618 | ||
| 1619 | register uint8_t line_parity; | |
| 1620 | register uint8_t column_parity; | |
| 1621 | register uint8_t i, j; | |
| 1622 | register uint16_t data; | |
| 1623 | ||
| 1624 | data = data_low; | |
| 1625 | column_parity = 0; | |
| 1626 | ||
| 1627 | for(i=0; i<4; i++) { | |
| 1628 | line_parity = 0; | |
| 1629 | for(j=0; j<8; j++) { | |
| 1630 | line_parity ^= data; | |
| 1631 | column_parity ^= (data & 1) << j; | |
| 1632 | *forward_ptr++ = data; | |
| 1633 | data >>= 1; | |
| 1634 | } | |
| 1635 | *forward_ptr++ = line_parity; | |
| 1636 | if(i == 1) | |
| 1637 | data = data_hi; | |
| 1638 | } | |
| 1639 | ||
| 54a942b0 | 1640 | for(j=0; j<8; j++) { |
| ae8e8a43 MHS |
1641 | *forward_ptr++ = column_parity; |
| 1642 | column_parity >>= 1; | |
| 54a942b0 | 1643 | } |
| ae8e8a43 MHS |
1644 | *forward_ptr = 0; |
| 1645 | ||
| 1646 | return 45; //return number of emited bits | |
| 54a942b0 | 1647 | } |
| 1648 | ||
| 1649 | //==================================================================== | |
| 1650 | // Forward Link send function | |
| 1651 | // Requires: forwarLink_data filled with valid bits (1 bit per byte) | |
| 1652 | // fwd_bit_count set with number of bits to be sent | |
| 1653 | //==================================================================== | |
| 1654 | void SendForward(uint8_t fwd_bit_count) { | |
| ae8e8a43 MHS |
1655 | |
| 1656 | fwd_write_ptr = forwardLink_data; | |
| 1657 | fwd_bit_sz = fwd_bit_count; | |
| 1658 | ||
| 1659 | LED_D_ON(); | |
| 1660 | ||
| 1661 | //Field on | |
| 1662 | FpgaDownloadAndGo(FPGA_BITSTREAM_LF); | |
| 1663 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
| 1664 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); | |
| 1665 | ||
| 1666 | // Give it a bit of time for the resonant antenna to settle. | |
| 1667 | // And for the tag to fully power up | |
| 1668 | SpinDelay(150); | |
| 1669 | ||
| 1670 | // force 1st mod pulse (start gap must be longer for 4305) | |
| 1671 | fwd_bit_sz--; //prepare next bit modulation | |
| 1672 | fwd_write_ptr++; | |
| 1673 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off | |
| 1674 | SpinDelayUs(55*8); //55 cycles off (8us each)for 4305 | |
| 1675 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
| 1676 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on | |
| 1677 | SpinDelayUs(16*8); //16 cycles on (8us each) | |
| 1678 | ||
| 1679 | // now start writting | |
| 1680 | while(fwd_bit_sz-- > 0) { //prepare next bit modulation | |
| 1681 | if(((*fwd_write_ptr++) & 1) == 1) | |
| 1682 | SpinDelayUs(32*8); //32 cycles at 125Khz (8us each) | |
| 1683 | else { | |
| 1684 | //These timings work for 4469/4269/4305 (with the 55*8 above) | |
| 1685 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off | |
| 1686 | SpinDelayUs(23*8); //16-4 cycles off (8us each) | |
| 1687 | FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz | |
| 1688 | FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on | |
| 1689 | SpinDelayUs(9*8); //16 cycles on (8us each) | |
| 1690 | } | |
| 54a942b0 | 1691 | } |
| 54a942b0 | 1692 | } |
| 1693 | ||
| 1694 | void EM4xLogin(uint32_t Password) { | |
| ae8e8a43 MHS |
1695 | |
| 1696 | uint8_t fwd_bit_count; | |
| 1697 | ||
| 1698 | forward_ptr = forwardLink_data; | |
| 1699 | fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN ); | |
| 1700 | fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 ); | |
| 1701 | ||
| 1702 | SendForward(fwd_bit_count); | |
| 1703 | ||
| 1704 | //Wait for command to complete | |
| 1705 | SpinDelay(20); | |
| 1706 | ||
| 54a942b0 | 1707 | } |
| 1708 | ||
| 1709 | void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { | |
| ae8e8a43 | 1710 | |
| 385f3987 | 1711 | uint8_t *dest = BigBuf_get_addr(); |
| 1712 | uint16_t bufferlength = BigBuf_max_traceLen(); | |
| 1713 | uint32_t i = 0; | |
| 1714 | ||
| 1715 | // Clear destination buffer before sending the command 0x80 = average. | |
| 1716 | memset(dest, 0x80, bufferlength); | |
| 1717 | ||
| ae8e8a43 | 1718 | uint8_t fwd_bit_count; |
| ae8e8a43 MHS |
1719 | |
| 1720 | //If password mode do login | |
| 1721 | if (PwdMode == 1) EM4xLogin(Pwd); | |
| 1722 | ||
| 1723 | forward_ptr = forwardLink_data; | |
| 1724 | fwd_bit_count = Prepare_Cmd( FWD_CMD_READ ); | |
| 1725 | fwd_bit_count += Prepare_Addr( Address ); | |
| 1726 | ||
| ae8e8a43 MHS |
1727 | // Connect the A/D to the peak-detected low-frequency path. |
| 1728 | SetAdcMuxFor(GPIO_MUXSEL_LOPKD); | |
| 1729 | // Now set up the SSC to get the ADC samples that are now streaming at us. | |
| 1730 | FpgaSetupSsc(); | |
| 1731 | ||
| 1732 | SendForward(fwd_bit_count); | |
| 1733 | ||
| 1734 | // Now do the acquisition | |
| 1735 | i = 0; | |
| 1736 | for(;;) { | |
| 1737 | if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { | |
| 1738 | AT91C_BASE_SSC->SSC_THR = 0x43; | |
| 1739 | } | |
| 1740 | if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { | |
| 1741 | dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR; | |
| 385f3987 | 1742 | ++i; |
| 1743 | if (i >= bufferlength) break; | |
| 1744 | } | |
| 1745 | } | |
| 1746 | ||
| 1747 | cmd_send(CMD_ACK,0,0,0,0,0); | |
| ae8e8a43 MHS |
1748 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off |
| 1749 | LED_D_OFF(); | |
| 54a942b0 | 1750 | } |
| 1751 | ||
| 1752 | void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { | |
| ae8e8a43 MHS |
1753 | |
| 1754 | uint8_t fwd_bit_count; | |
| 1755 | ||
| 1756 | //If password mode do login | |
| 1757 | if (PwdMode == 1) EM4xLogin(Pwd); | |
| 1758 | ||
| 1759 | forward_ptr = forwardLink_data; | |
| 1760 | fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE ); | |
| 1761 | fwd_bit_count += Prepare_Addr( Address ); | |
| 1762 | fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 ); | |
| 1763 | ||
| 1764 | SendForward(fwd_bit_count); | |
| 1765 | ||
| 1766 | //Wait for write to complete | |
| 1767 | SpinDelay(20); | |
| 1768 | FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off | |
| 1769 | LED_D_OFF(); | |
| 54a942b0 | 1770 | } |