| b1d0de0a |
1 | # This makefile needs to be edited to reflect the location |
| bb06be43 |
2 | # of your own arm-elf-gcc toolchain (ARMLIB variable) |
| b1d0de0a |
3 | |
| 4 | CC = arm-elf-gcc |
| 5 | AS = arm-elf-as |
| 6 | LD = arm-elf-ld |
| 7 | OBJCOPY = arm-elf-objcopy |
| 8 | |
| bb06be43 |
9 | # Indicate where your gnuarm toolchain libgcc.a interworking library is located |
| 10 | # or set $ARMLIB in your environment: |
| 11 | #ARMLIB = /usr/local/lib/gcc/arm-elf/4.3.3/interwork |
| 12 | |
| b1d0de0a |
13 | |
| aa4d9d9b |
14 | # Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD |
| 15 | # in your firmware (add OBJLCD to OBJ too!) |
| 16 | #EXTRA_CFLAGS = -DWITH_LCD |
| 17 | EXTRA_CFLAGS = |
| 18 | |
| 19 | ### You should not need to edit below this line |
| 20 | |
| 21 | INCLUDE = -I../include |
| 22 | INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h |
| b1d0de0a |
23 | CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall -mthumb-interwork |
| aa4d9d9b |
24 | CFLAGS = $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb |
| b1d0de0a |
25 | |
| 26 | |
| 27 | OBJDIR = obj |
| b1d0de0a |
28 | |
| aa4d9d9b |
29 | OBJLCD = $(OBJDIR)/LCD.o\ |
| 30 | $(OBJDIR)/fonts.o |
| 31 | |
| 32 | OBJ = $(OBJDIR)/start.o \ |
| 33 | $(OBJDIR)/appmain.o \ |
| 34 | $(OBJDIR)/fpga.o \ |
| 35 | $(OBJDIR)/iso15693.o \ |
| aa4d9d9b |
36 | $(OBJDIR)/util.o |
| b1d0de0a |
37 | |
| 0e25ae11 |
38 | # To be compiled in ARM mode, not thumb mode: larger but faster |
| 39 | # Alleviates the 'blew circular buffer' issues somehow... |
| 40 | OBJFAST = $(OBJDIR)/iso14443.o \ |
| 41 | $(OBJDIR)/iso14443a.o |
| b1d0de0a |
42 | |
| aa4d9d9b |
43 | OBJFPGA = $(OBJDIR)/fpgaimg.o |
| 44 | |
| 45 | OBJCOMMON = $(OBJDIR)/usb.o |
| b1d0de0a |
46 | |
| 47 | all: osimage.s19 fpgaimage.s19 fullimage.s19 |
| 48 | |
| 49 | fpgaimage.s19: $(OBJFPGA) |
| 50 | @echo fpgaimage.s19 |
| aa4d9d9b |
51 | $(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^ |
| 52 | $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19 |
| b1d0de0a |
53 | |
| 54 | osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) |
| 55 | @echo osimage.s19 |
| bb06be43 |
56 | $(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf $^ $(ARMLIB)/libgcc.a |
| aa4d9d9b |
57 | $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19 |
| b1d0de0a |
58 | |
| 59 | fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA) |
| 60 | @echo fullimage.s19 |
| bb06be43 |
61 | $(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^ $(ARMLIB)/libgcc.a |
| aa4d9d9b |
62 | $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19 |
| b1d0de0a |
63 | |
| aa4d9d9b |
64 | # Directives to put the *.o in the OBJDIR directory: |
| 65 | $(OBJ): $(OBJDIR)/%.o : %.c |
| 66 | $(CC) $(CFLAGS) $< -o $@ |
| b1d0de0a |
67 | |
| aa4d9d9b |
68 | $(OBJFPGA): $(OBJDIR)/%.o : %.c |
| 69 | $(CC) $(CFLAGS) $< -o $@ |
| b1d0de0a |
70 | |
| aa4d9d9b |
71 | $(OBJFAST): $(OBJDIR)/%.o : %.c |
| 72 | $(CC) $(CFLAGS_COMMON) $< -o $@ |
| b1d0de0a |
73 | |
| aa4d9d9b |
74 | $(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c |
| 75 | $(CC) $(CFLAGS) $< -o $@ |
| b1d0de0a |
76 | |
| aa4d9d9b |
77 | # Those do not work on the current firmware ! |
| b1d0de0a |
78 | flash-fpga: fpgaimage.s19 |
| 79 | ../linux/flasher fpga fpgaimage.s19 |
| 80 | |
| 81 | flash: osimage.s19 |
| 82 | ../linux/flasher os osimage.s19 |
| 83 | |
| 84 | jtag-flash-full: fullimage.s19 |
| 85 | ../../OpenOCD/openocd -c "halt; flash write_image fullimage.s19 0x00100000; halt; reset; resume; poll; exit" |
| 86 | |
| 87 | jtag-flash-fpga: fpgaimage.s19 |
| 88 | ../../OpenOCD/openocd -c "halt; flash write_image fpgaimage.s19 0x00100000; halt; reset; resume; poll; exit" |
| 89 | |
| 90 | jtag-flash: osimage.s19 |
| 91 | ../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit" |
| 92 | |
| 93 | clean: |
| aa4d9d9b |
94 | rm -f $(OBJDIR)/*.o $(OBJDIR)/*.elf *.s19 |
| b1d0de0a |
95 | |
| 96 | .PHONY: all clean |
projects / proxmark3-svn / blame