[proxmark3-svn] / armsrc / Makefile.linux

# This makefile needs to be edited to reflect the location
# of your own arm-elf-gcc toolchain (LIB variable)

CC	= arm-elf-gcc
AS	= arm-elf-as
LD	= arm-elf-ld
OBJCOPY = arm-elf-objcopy

# Indicate where your gnuarm toolchain libgcc.a library is located:
LIB = /usr/local/new/gnuarm-4.3.0/lib/gcc/arm-elf/4.3.0/interwork

# Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD
# in your firmware (add OBJLCD to OBJ too!)
#EXTRA_CFLAGS = -DWITH_LCD
EXTRA_CFLAGS =

### You should not need to edit below this line

INCLUDE = -I../include
INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h
CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall  -mthumb-interwork
CFLAGS	= $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb


OBJDIR = obj

OBJLCD = $(OBJDIR)/LCD.o\
		 $(OBJDIR)/fonts.o

OBJ =	$(OBJDIR)/start.o \
		$(OBJDIR)/appmain.o \
		$(OBJDIR)/fpga.o \
		$(OBJDIR)/iso15693.o \
		$(OBJDIR)/iso14443.o \
		$(OBJDIR)/util.o


OBJFAST =	$(OBJDIR)/iso14443a.o

OBJFPGA =	$(OBJDIR)/fpgaimg.o

OBJCOMMON =	$(OBJDIR)/usb.o

all: osimage.s19 fpgaimage.s19 fullimage.s19

fpgaimage.s19: $(OBJFPGA)
	@echo fpgaimage.s19
	$(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^
	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19

osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON)
	@echo osimage.s19
	$(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf $^ $(LIB)/libgcc.a
	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19

fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA)
	@echo fullimage.s19
	$(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^  $(LIB)/libgcc.a
	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19

# Directives to put the *.o in the OBJDIR directory:
$(OBJ): $(OBJDIR)/%.o : %.c
	$(CC) $(CFLAGS) $< -o $@

$(OBJFPGA): $(OBJDIR)/%.o : %.c
	$(CC) $(CFLAGS) $< -o $@

$(OBJFAST): $(OBJDIR)/%.o : %.c
	$(CC) $(CFLAGS_COMMON) $< -o $@
	
$(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c
	$(CC) $(CFLAGS) $< -o $@

# Those do not work on the current firmware !
flash-fpga: fpgaimage.s19
	../linux/flasher fpga fpgaimage.s19

flash: osimage.s19
	../linux/flasher os osimage.s19

jtag-flash-full: fullimage.s19
	../../OpenOCD/openocd -c "halt; flash write_image fullimage.s19 0x00100000; halt; reset; resume; poll; exit"

jtag-flash-fpga: fpgaimage.s19
	../../OpenOCD/openocd -c "halt; flash write_image fpgaimage.s19 0x00100000; halt; reset; resume; poll; exit"

jtag-flash: osimage.s19
	../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit"

clean:
	rm -f $(OBJDIR)/*.o $(OBJDIR)/*.elf *.s19

.PHONY: all clean
Commit	Line	Data
b1d0de0a	1	# This makefile needs to be edited to reflect the location
aa4d9d9b	2	# of your own arm-elf-gcc toolchain (LIB variable)
b1d0de0a	3
	4	CC = arm-elf-gcc
	5	AS = arm-elf-as
	6	LD = arm-elf-ld
	7	OBJCOPY = arm-elf-objcopy
	8
aa4d9d9b	9	# Indicate where your gnuarm toolchain libgcc.a library is located:
b1d0de0a	10	LIB = /usr/local/new/gnuarm-4.3.0/lib/gcc/arm-elf/4.3.0/interwork
b1d0de0a	11
aa4d9d9b	12	# Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD
	13	# in your firmware (add OBJLCD to OBJ too!)
	14	#EXTRA_CFLAGS = -DWITH_LCD
	15	EXTRA_CFLAGS =
	16
	17	### You should not need to edit below this line
	18
	19	INCLUDE = -I../include
	20	INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h
b1d0de0a	21	CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall -mthumb-interwork
aa4d9d9b	22	CFLAGS = $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb
b1d0de0a	23
	24
	25	OBJDIR = obj
b1d0de0a	26
aa4d9d9b	27	OBJLCD = $(OBJDIR)/LCD.o\
	28	$(OBJDIR)/fonts.o
	29
	30	OBJ = $(OBJDIR)/start.o \
	31	$(OBJDIR)/appmain.o \
	32	$(OBJDIR)/fpga.o \
	33	$(OBJDIR)/iso15693.o \
	34	$(OBJDIR)/iso14443.o \
	35	$(OBJDIR)/util.o
b1d0de0a	36
b1d0de0a	37
aa4d9d9b	38	OBJFAST = $(OBJDIR)/iso14443a.o
b1d0de0a	39
aa4d9d9b	40	OBJFPGA = $(OBJDIR)/fpgaimg.o
	41
	42	OBJCOMMON = $(OBJDIR)/usb.o
b1d0de0a	43
	44	all: osimage.s19 fpgaimage.s19 fullimage.s19
	45
	46	fpgaimage.s19: $(OBJFPGA)
	47	@echo fpgaimage.s19
aa4d9d9b	48	$(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^
aa4d9d9b	49	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19
b1d0de0a	50
	51	osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON)
	52	@echo osimage.s19
aa4d9d9b	53	$(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf $^ $(LIB)/libgcc.a
aa4d9d9b	54	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19
b1d0de0a	55
	56	fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA)
	57	@echo fullimage.s19
aa4d9d9b	58	$(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^ $(LIB)/libgcc.a
aa4d9d9b	59	$(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19
b1d0de0a	60
aa4d9d9b	61	# Directives to put the *.o in the OBJDIR directory:
	62	$(OBJ): $(OBJDIR)/%.o : %.c
	63	$(CC) $(CFLAGS) $< -o $@
b1d0de0a	64
aa4d9d9b	65	$(OBJFPGA): $(OBJDIR)/%.o : %.c
aa4d9d9b	66	$(CC) $(CFLAGS) $< -o $@
b1d0de0a	67
aa4d9d9b	68	$(OBJFAST): $(OBJDIR)/%.o : %.c
aa4d9d9b	69	$(CC) $(CFLAGS_COMMON) $< -o $@
b1d0de0a	70
aa4d9d9b	71	$(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c
aa4d9d9b	72	$(CC) $(CFLAGS) $< -o $@
b1d0de0a	73
aa4d9d9b	74	# Those do not work on the current firmware !
b1d0de0a	75	flash-fpga: fpgaimage.s19
	76	../linux/flasher fpga fpgaimage.s19
	77
	78	flash: osimage.s19
	79	../linux/flasher os osimage.s19
	80
	81	jtag-flash-full: fullimage.s19
	82	../../OpenOCD/openocd -c "halt; flash write_image fullimage.s19 0x00100000; halt; reset; resume; poll; exit"
	83
	84	jtag-flash-fpga: fpgaimage.s19
	85	../../OpenOCD/openocd -c "halt; flash write_image fpgaimage.s19 0x00100000; halt; reset; resume; poll; exit"
	86
	87	jtag-flash: osimage.s19
	88	../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit"
	89
	90	clean:
aa4d9d9b	91	rm -f $(OBJDIR)/.o $(OBJDIR)/.elf *.s19
b1d0de0a	92
b1d0de0a	93	.PHONY: all clean