But let people override CROSS if they reall want to ;)

[proxmark3-svn] / include / usb_cmd.h

//-----------------------------------------------------------------------------\r
// Definitions for all the types of commands that may be sent over USB; our\r
// own protocol.\r
// Jonathan Westhues, Mar 2006\r
// Edits by Gerhard de Koning Gans, Sep 2007\r
//-----------------------------------------------------------------------------\r
\r
#ifndef __USB_CMD_H\r
#define __USB_CMD_H\r
#ifdef _MSC_VER\r
typedef DWORD uint32_t;\r
typedef BYTE uint8_t;\r
#define PACKED\r
// stuff\r
#else\r
#include <stdint.h>\r
#include <stdbool.h>\r
#define PACKED __attribute__((packed))\r
#endif\r
\r
typedef struct {\r
	uint32_t	cmd;\r
	uint32_t	arg[3];\r
	union {\r
		uint8_t		asBytes[48];\r
		uint32_t	asDwords[12];\r
	} d;\r
} PACKED UsbCommand;\r
\r
// For the bootloader\r
#define CMD_DEVICE_INFO					0x0000\r
#define CMD_SETUP_WRITE					0x0001\r
#define CMD_FINISH_WRITE				0x0003\r
#define CMD_HARDWARE_RESET				0x0004\r
#define CMD_START_FLASH					0x0005\r
#define CMD_NACK					0x00fe\r
#define CMD_ACK						0x00ff\r
\r
// For general mucking around\r
#define CMD_DEBUG_PRINT_STRING				0x0100\r
#define CMD_DEBUG_PRINT_INTEGERS			0x0101\r
#define CMD_DEBUG_PRINT_BYTES				0x0102\r
#define CMD_LCD_RESET					0x0103\r
#define CMD_LCD						0x0104\r
#define CMD_BUFF_CLEAR					0x0105\r
#define CMD_READ_MEM					0x0106\r
#define CMD_VERSION					0x0107\r
\r
// For low-frequency tags\r
#define CMD_READ_TI_TYPE				0x0202\r
#define CMD_WRITE_TI_TYPE				0x0203\r
#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE			0x0204\r
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K		0x0205\r
#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K	0x0206\r
#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K		0x0207\r
#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K		0x0208\r
#define CMD_DOWNLOADED_SIM_SAMPLES_125K			0x0209\r
#define CMD_SIMULATE_TAG_125K				0x020A\r
#define CMD_HID_DEMOD_FSK				0x020B\r
#define CMD_HID_SIM_TAG					0x020C\r
#define CMD_SET_LF_DIVISOR				0x020D\r
#define CMD_LF_SIMULATE_BIDIR				0x020E\r
#define CMD_SET_ADC_MUX					0x020F\r
/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */\r
\r
// For the 13.56 MHz tags\r
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693		0x0300\r
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443		0x0301\r
#define CMD_READ_SRI512_TAG				0x0303\r
#define CMD_READ_SRIX4K_TAG				0x0304\r
#define CMD_READER_ISO_15693				0x0310\r
#define CMD_SIMTAG_ISO_15693				0x0311\r
#define CMD_SIMULATE_TAG_HF_LISTEN			0x0380\r
#define CMD_SIMULATE_TAG_ISO_14443			0x0381\r
#define CMD_SNOOP_ISO_14443				0x0382\r
#define CMD_SNOOP_ISO_14443a				0x0383\r
#define CMD_SIMULATE_TAG_ISO_14443a			0x0384\r
#define CMD_READER_ISO_14443a				0x0385\r
#define CMD_SIMULATE_MIFARE_CARD			0x0386\r
#define CMD_SIMULATE_TAG_LEGIC_RF			0x0387\r
#define CMD_READER_LEGIC_RF				0x0388\r
#define CMD_READER_MIFARE				0x0389\r
\r
// For measurements of the antenna tuning\r
#define CMD_MEASURE_ANTENNA_TUNING			0x0400\r
#define CMD_MEASURE_ANTENNA_TUNING_HF			0x0401\r
#define CMD_MEASURED_ANTENNA_TUNING			0x0410\r
#define CMD_LISTEN_READER_FIELD				0x0420\r
\r
// For direct FPGA control\r
#define CMD_FPGA_MAJOR_MODE_OFF				0x0500\r
\r
#define CMD_UNKNOWN					0xFFFF\r
\r
// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:\r
/* Whether a bootloader that understands the common_area is present */ \r
#define DEVICE_INFO_FLAG_BOOTROM_PRESENT         	(1<<0)\r
\r
/* Whether a osimage that understands the common_area is present */\r
#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT         	(1<<1)\r
\r
/* Set if the bootloader is currently executing */\r
#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM    	(1<<2)\r
\r
/* Set if the OS is currently executing */\r
#define DEVICE_INFO_FLAG_CURRENT_MODE_OS         	(1<<3)\r
\r
/* Set if this device understands the extend start flash command */\r
#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH 	(1<<4)\r
\r
/* CMD_START_FLASH may have three arguments: start of area to flash, \r
   end of area to flash, optional magic.\r
   The bootrom will not allow to overwrite itself unless this magic\r
   is given as third parameter */\r
\r
#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'\r
\r
#endif\r