]>
cvs.zerfleddert.de Git - proxmark3-svn/blob - common/protocols.h
7 //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501 9 ISO14443A (usually NFC tags) 11 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes) 12 A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK]) 13 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA) 14 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor) 15 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK) 16 95 20 = Anticollision of cascade level2 17 95 70 = Select of cascade level2 18 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card) 20 60 = Authenticate with KeyA 21 61 = Authenticate with KeyB 22 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A) 28 A0 = Compatibility Write (to accomodate MIFARE commands) 29 1A = Step1 Authenticate 30 AF = Step2 Authenticate 37 SRIX4K (tag does not respond to 05) 39 0E xx = SELECT ID (xx = Chip-ID) 41 08 yy = Read Block (yy = block number) 42 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) 43 0C = Reset to Inventory 45 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) 49 MANDATORY COMMANDS (all ISO15693 tags must support those) 50 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes) 52 OPTIONAL COMMANDS (not all tags support them) 53 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes) 54 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes) 56 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC) 63 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes) 64 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC) 66 EM Microelectronic CUSTOM COMMANDS 67 A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type) 68 A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value) 69 B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info) 70 E4 = Login (followed by 1byte IC Manufacturer code+4bytes password) 71 NXP/Philips CUSTOM COMMANDS 73 A1 = Fast Inventory Read 78 A6 = Password Protect EAS 81 B0 = Inventory Page Read 82 B1 = Fast Inventory Page Read 83 B2 = Get Random Number 87 B6 = Bit Password Protection 88 B7 = Lock Page Protection Condition 89 B8 = Get Multiple Block Protection Status 92 BB = 64bit Password Protection 93 40 = Long Range CMD (Standard ISO/TR7003:1990) 96 #define ICLASS_CMD_ACTALL 0x0A 97 #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C 98 #define ICLASS_CMD_SELECT 0x81 99 #define ICLASS_CMD_PAGESEL 0x84 100 #define ICLASS_CMD_READCHECK_KD 0x88 101 #define ICLASS_CMD_READCHECK_KC 0x18 102 #define ICLASS_CMD_CHECK_KC 0x95 103 #define ICLASS_CMD_CHECK_KD 0x05 104 #define ICLASS_CMD_DETECT 0x0F 105 #define ICLASS_CMD_HALT 0x00 106 #define ICLASS_CMD_UPDATE 0x87 107 #define ICLASS_CMD_ACT 0x8E 108 #define ICLASS_CMD_READ4 0x06 111 #define ISO14443A_CMD_REQA 0x26 112 #define ISO14443A_CMD_WUPA 0x52 113 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 114 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 115 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97 116 #define ISO14443A_CMD_HALT 0x50 117 #define ISO14443A_CMD_RATS 0xE0 119 #define MIFARE_CMD_READBLOCK 0x30 120 #define MIFARE_CMD_WRITEBLOCK 0xA0 121 #define MIFARE_AUTH_KEYA 0x60 122 #define MIFARE_AUTH_KEYB 0x61 123 #define MIFARE_MAGICWUPC1 0x40 124 #define MIFARE_MAGICWUPC2 0x43 125 #define MIFARE_MAGICWIPEC 0x41 126 #define MIFARE_CMD_INC 0xC0 127 #define MIFARE_CMD_DEC 0xC1 128 #define MIFARE_CMD_RESTORE 0xC2 129 #define MIFARE_CMD_TRANSFER 0xB0 131 #define MIFARE_EV1_PERSONAL_UID 0x40 132 #define MIFARE_EV1_UIDF0 0x00 133 #define MIFARE_EV1_UIDF1 0x40 134 #define MIFARE_EV1_UIDF2 0x20 135 #define MIFARE_EV1_UIDF3 0x60 136 #define MIFARE_EV1_SETMODE 0x43 138 #define MIFARE_ULC_WRITE 0xA2 139 #define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK 140 #define MIFARE_ULC_AUTH_1 0x1A 141 #define MIFARE_ULC_AUTH_2 0xAF 143 #define MIFARE_ULEV1_AUTH 0x1B 144 #define MIFARE_ULEV1_VERSION 0x60 145 #define MIFARE_ULEV1_FASTREAD 0x3A 146 #define MIFARE_ULEV1_WRITE 0xA2 147 #define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK 148 #define MIFARE_ULEV1_READ_CNT 0x39 149 #define MIFARE_ULEV1_INCR_CNT 0xA5 150 #define MIFARE_ULEV1_READSIG 0x3C 151 #define MIFARE_ULEV1_CHECKTEAR 0x3E 152 #define MIFARE_ULEV1_VCSL 0x4B 154 // mifare 4bit card answers 155 #define CARD_ACK 0x0A // 1010 - ACK 156 #define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed) 157 #define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error 162 0E xx = SELECT ID (xx = Chip-ID) 164 08 yy = Read Block (yy = block number) 165 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) 166 0C = Reset to Inventory 168 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) 171 #define ISO14443B_REQB 0x05 172 #define ISO14443B_ATTRIB 0x1D 173 #define ISO14443B_HALT 0x50 174 #define ISO14443B_INITIATE 0x06 175 #define ISO14443B_SELECT 0x0E 176 #define ISO14443B_GET_UID 0x0B 177 #define ISO14443B_READ_BLK 0x08 178 #define ISO14443B_WRITE_BLK 0x09 179 #define ISO14443B_RESET 0x0C 180 #define ISO14443B_COMPLETION 0x0F 181 #define ISO14443B_AUTHENTICATE 0x0A 184 #define ISO15693_INVENTORY 0x01 185 #define ISO15693_STAYQUIET 0x02 186 #define ISO15693_READBLOCK 0x20 187 #define ISO15693_WRITEBLOCK 0x21 188 #define ISO15693_LOCKBLOCK 0x22 189 #define ISO15693_READ_MULTI_BLOCK 0x23 190 #define ISO15693_WRITE_MULTI_BLOCK 0x24 191 #define ISO15693_SELECT 0x25 192 #define ISO15693_RESET_TO_READY 0x26 193 #define ISO15693_WRITE_AFI 0x27 194 #define ISO15693_LOCK_AFI 0x28 195 #define ISO15693_WRITE_DSFID 0x29 196 #define ISO15693_LOCK_DSFID 0x2A 197 #define ISO15693_GET_SYSTEM_INFO 0x2B 198 #define ISO15693_READ_MULTI_SECSTATUS 0x2C 200 // ISO15693 REQUEST FLAGS 201 #define ISO15693_REQ_SUBCARRIER_TWO (1<<0) 202 #define ISO15693_REQ_DATARATE_HIGH (1<<1) 203 #define ISO15693_REQ_INVENTORY (1<<2) 204 #define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU 205 #define ISO15693_REQ_OPTION (1<<6) // Command specific option selector 206 // when REQ_INVENTORY is not set 207 #define ISO15693_REQ_SELECT (1<<4) // only selected cards response 208 #define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address 209 // when REQ_INVENTORY is set 210 #define ISO15693_REQINV_AFI (1<<4) // AFI Field is present 211 #define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set) 213 // ISO15693 RESPONSE FLAGS 214 #define ISO15693_RES_ERROR (1<<0) 215 #define ISO15693_RES_EXT (1<<3) // Protocol Extention 217 // ISO15693 RESPONSE ERROR CODES 218 #define ISO15693_NOERROR 0x00 219 #define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported 220 #define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error) 221 #define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported 222 #define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error 223 #define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10 224 #define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again 225 #define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed 226 #define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful 227 #define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful 230 // Topaz command set: 231 #define TOPAZ_REQA 0x26 // Request 232 #define TOPAZ_WUPA 0x52 // WakeUp 233 #define TOPAZ_RID 0x78 // Read ID 234 #define TOPAZ_RALL 0x00 // Read All (all bytes) 235 #define TOPAZ_READ 0x01 // Read (a single byte) 236 #define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte) 237 #define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte) 238 // additional commands for Dynamic Memory Model 239 #define TOPAZ_RSEG 0x10 // Read segment 240 #define TOPAZ_READ8 0x02 // Read (eight bytes) 241 #define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes) 242 #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) 245 #define HITAG1_SET_CCNEW 0xC2 // left 5 bits only 246 #define HITAG1_READ_ID 0x00 // not a real command, consists of 5 bits length, <length> bits partial SN, 8 bits CRC 247 #define HITAG1_SELECT 0x00 // left 5 bits only, followed by 32 bits SN and 8 bits CRC 248 #define HITAG1_WRPPAGE 0x80 // left 4 bits only, followed by 8 bits page and 8 bits CRC 249 #define HITAG1_WRPBLK 0x90 // left 4 bits only, followed by 8 bits block and 8 bits CRC 250 #define HITAG1_WRCPAGE 0xA0 // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC 251 #define HITAG1_WRCBLK 0xB0 // left 4 bits only, followed by 8 bits block and 8 bits CRC 252 #define HITAG1_RDPPAGE 0xC0 // left 4 bits only, followed by 8 bits page and 8 bits CRC 253 #define HITAG1_RDPBLK 0xD0 // left 4 bits only, followed by 8 bits block and 8 bits CRC 254 #define HITAG1_RDCPAGE 0xE0 // left 4 bits only, followed by 8 bits page and 8 bits CRC 255 #define HITAG1_RDCBLK 0xF0 // left 4 bits only, followed by 8 bits block and 8 bits CRC 256 #define HITAG1_HALT 0x70 // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC 259 #define HITAG2_START_AUTH 0xC0 // left 5 bits only 260 #define HITAG2_READ_PAGE 0xC0 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits 261 #define HITAG2_READ_PAGE_INVERTED 0x44 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits 262 #define HITAG2_WRITE_PAGE 0x82 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits 263 #define HITAG2_HALT 0x00 // left 5 bits only 269 #define PROTO_MIFARE 4 272 #define ISO_14443_4 7 276 #define FUSE_FPERS 0x80 277 #define FUSE_CODING1 0x40 278 #define FUSE_CODING0 0x20 279 #define FUSE_CRYPT1 0x10 280 #define FUSE_CRYPT0 0x08 281 #define FUSE_FPROD1 0x04 282 #define FUSE_FPROD0 0x02 285 // ISO 7816-4 Basic interindustry commands. For command APDU's. 286 #define ISO7816_ERASE_BINARY 0x0E 287 #define ISO7816_VERIFY 0x20 288 #define ISO7816_MANAGE_CHANNEL 0x70 289 #define ISO7816_EXTERNAL_AUTHENTICATE 0x82 290 #define ISO7816_GET_CHALLENGE 0x84 291 #define ISO7816_INTERNAL_AUTHENTICATE 0x88 292 #define ISO7816_SELECT_FILE 0xA4 293 #define ISO7816_GET_PROCESSING_OPTIONS 0xA8 294 #define ISO7816_READ_BINARY 0xB0 295 #define ISO7816_READ_RECORDS 0xB2 296 #define ISO7816_GET_RESPONSE 0xC0 297 #define ISO7816_ENVELOPE 0xC2 298 #define ISO7816_GET_DATA 0xCA 299 #define ISO7816_WRITE_BINARY 0xD0 300 #define ISO7816_WRITE_RECORD 0xD2 301 #define ISO7816_UPDATE_BINARY 0xD6 302 #define ISO7816_PUT_DATA 0xDA 303 #define ISO7816_UPDATE_DATA 0xDC 304 #define ISO7816_APPEND_RECORD 0xE2 305 // ISO7816-4 For response APDU's 306 #define ISO7816_OK 0x9000 308 #define ISO7816_MAX_FRAME_SIZE 261 311 /* T55x7 configuration register definitions */ 312 #define T55x7_POR_DELAY 0x00000001 313 #define T55x7_ST_TERMINATOR 0x00000008 314 #define T55x7_PWD 0x00000010 315 #define T55x7_MAXBLOCK_SHIFT 5 316 #define T55x7_AOR 0x00000200 317 #define T55x7_PSKCF_RF_2 0 318 #define T55x7_PSKCF_RF_4 0x00000400 319 #define T55x7_PSKCF_RF_8 0x00000800 320 #define T55x7_MODULATION_DIRECT 0 321 #define T55x7_MODULATION_PSK1 0x00001000 322 #define T55x7_MODULATION_PSK2 0x00002000 323 #define T55x7_MODULATION_PSK3 0x00003000 324 #define T55x7_MODULATION_FSK1 0x00004000 325 #define T55x7_MODULATION_FSK2 0x00005000 326 #define T55x7_MODULATION_FSK1a 0x00006000 327 #define T55x7_MODULATION_FSK2a 0x00007000 328 #define T55x7_MODULATION_MANCHESTER 0x00008000 329 #define T55x7_MODULATION_BIPHASE 0x00010000 330 #define T55x7_MODULATION_DIPHASE 0x00018000 331 #define T55x7_X_MODE 0x00020000 332 #define T55x7_BITRATE_RF_8 0 333 #define T55x7_BITRATE_RF_16 0x00040000 334 #define T55x7_BITRATE_RF_32 0x00080000 335 #define T55x7_BITRATE_RF_40 0x000C0000 336 #define T55x7_BITRATE_RF_50 0x00100000 337 #define T55x7_BITRATE_RF_64 0x00140000 338 #define T55x7_BITRATE_RF_100 0x00180000 339 #define T55x7_BITRATE_RF_128 0x001C0000 341 /* T5555 (Q5) configuration register definitions */ 342 #define T5555_ST_TERMINATOR 0x00000001 343 #define T5555_MAXBLOCK_SHIFT 0x00000001 344 #define T5555_MODULATION_MANCHESTER 0 345 #define T5555_MODULATION_PSK1 0x00000010 346 #define T5555_MODULATION_PSK2 0x00000020 347 #define T5555_MODULATION_PSK3 0x00000030 348 #define T5555_MODULATION_FSK1 0x00000040 349 #define T5555_MODULATION_FSK2 0x00000050 350 #define T5555_MODULATION_BIPHASE 0x00000060 351 #define T5555_MODULATION_DIRECT 0x00000070 352 #define T5555_INVERT_OUTPUT 0x00000080 353 #define T5555_PSK_RF_2 0 354 #define T5555_PSK_RF_4 0x00000100 355 #define T5555_PSK_RF_8 0x00000200 356 #define T5555_USE_PWD 0x00000400 357 #define T5555_USE_AOR 0x00000800 358 #define T5555_SET_BITRATE(x) (((x-2)/2)<<12) 359 #define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2) 360 #define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2 361 #define T5555_FAST_WRITE 0x00004000 362 #define T5555_PAGE_SELECT 0x00008000 364 #define T55XX_WRITE_TIMEOUT 1500 366 uint32_t GetT55xxClockBit ( uint32_t clock
); 368 // em4x05 & em4x69 chip configuration register definitions 369 #define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2) 370 #define EM4x05_SET_BITRATE(x) ((x-2)/2) 371 #define EM4x05_MODULATION_NRZ 0x00000000 372 #define EM4x05_MODULATION_MANCHESTER 0x00000040 373 #define EM4x05_MODULATION_BIPHASE 0x00000080 374 #define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips 375 #define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips 376 #define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips 377 #define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips 378 #define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips 379 #define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips 380 #define EM4x05_PSK_RF_2 0 381 #define EM4x05_PSK_RF_4 0x00000400 382 #define EM4x05_PSK_RF_8 0x00000800 383 #define EM4x05_MAXBLOCK_SHIFT 14 384 #define EM4x05_FIRST_USER_BLOCK 5 385 #define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode 386 #define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1) 387 #define EM4x05_READ_LOGIN_REQ 1<<18 388 #define EM4x05_READ_HK_LOGIN_REQ 1<<19 389 #define EM4x05_WRITE_LOGIN_REQ 1<<20 390 #define EM4x05_WRITE_HK_LOGIN_REQ 1<<21 391 #define EM4x05_READ_AFTER_WRITE 1<<22 392 #define EM4x05_DISABLE_ALLOWED 1<<23 393 #define EM4x05_READER_TALK_FIRST 1<<24
projects / proxmark3-svn / blob