]> cvs.zerfleddert.de Git - proxmark3-svn/blob - client/hid-flasher/usb_cmd.h
CHG: a message..
[proxmark3-svn] / client / hid-flasher / usb_cmd.h
1 //-----------------------------------------------------------------------------
2 // Jonathan Westhues, Mar 2006
3 // Edits by Gerhard de Koning Gans, Sep 2007
4 //
5 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
6 // at your option, any later version. See the LICENSE.txt file for the text of
7 // the license.
8 //-----------------------------------------------------------------------------
9 // Definitions for all the types of commands that may be sent over USB; our
10 // own protocol.
11 //-----------------------------------------------------------------------------
12
13 #ifndef __USB_CMD_H
14 #define __USB_CMD_H
15 #ifdef _MSC_VER
16 typedef DWORD uint32_t;
17 typedef BYTE uint8_t;
18 #define PACKED
19 // stuff
20 #else
21 #include <stdint.h>
22 #include <stdbool.h>
23 #define PACKED __attribute__((packed))
24 #endif
25
26 typedef struct {
27 uint32_t cmd;
28 uint32_t arg[3];
29 union {
30 uint8_t asBytes[48];
31 uint32_t asDwords[12];
32 } d;
33 } PACKED UsbCommand;
34
35 // For the bootloader
36 #define CMD_DEVICE_INFO 0x0000
37 #define CMD_SETUP_WRITE 0x0001
38 #define CMD_FINISH_WRITE 0x0003
39 #define CMD_HARDWARE_RESET 0x0004
40 #define CMD_START_FLASH 0x0005
41 #define CMD_NACK 0x00fe
42 #define CMD_ACK 0x00ff
43
44 // For general mucking around
45 #define CMD_DEBUG_PRINT_STRING 0x0100
46 #define CMD_DEBUG_PRINT_INTEGERS 0x0101
47 #define CMD_DEBUG_PRINT_BYTES 0x0102
48 #define CMD_LCD_RESET 0x0103
49 #define CMD_LCD 0x0104
50 #define CMD_BUFF_CLEAR 0x0105
51 #define CMD_READ_MEM 0x0106
52 #define CMD_VERSION 0x0107
53 #define CMD_STATUS 0x0108
54 #define CMD_PING 0x0109
55
56 #define CMD_DOWNLOAD_EML_BIGBUF 0x0110
57 #define CMD_DOWNLOADED_EML_BIGBUF 0x0111
58
59 // For low-frequency tags
60 #define CMD_READ_TI_TYPE 0x0202
61 #define CMD_WRITE_TI_TYPE 0x0203
62 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
63 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
64 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
65 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
66 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
67 #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
68 #define CMD_SIMULATE_TAG_125K 0x020A
69 #define CMD_HID_DEMOD_FSK 0x020B
70 #define CMD_HID_SIM_TAG 0x020C
71 #define CMD_SET_LF_DIVISOR 0x020D
72 #define CMD_LF_SIMULATE_BIDIR 0x020E
73 #define CMD_SET_ADC_MUX 0x020F
74 #define CMD_HID_CLONE_TAG 0x0210
75 #define CMD_EM410X_WRITE_TAG 0x0211
76 #define CMD_INDALA_CLONE_TAG 0x0212
77 // for 224 bits UID
78 #define CMD_INDALA_CLONE_TAG_L 0x0213
79 #define CMD_T55XX_READ_BLOCK 0x0214
80 #define CMD_T55XX_WRITE_BLOCK 0x0215
81 #define CMD_T55XX_RESET_READ 0x0216
82 #define CMD_T55XX_WAKEUP 0x0224
83
84 #define CMD_PCF7931_READ 0x0217
85 #define CMD_PCF7931_WRITE 0x0223
86 #define CMD_EM4X_READ_WORD 0x0218
87 #define CMD_EM4X_WRITE_WORD 0x0219
88 #define CMD_IO_DEMOD_FSK 0x021A
89 #define CMD_IO_CLONE_TAG 0x021B
90 #define CMD_EM410X_DEMOD 0x021c
91 // Sampling configuration for LF reader/snooper
92 #define CMD_SET_LF_SAMPLING_CONFIG 0x021d
93 #define CMD_FSK_SIM_TAG 0x021E
94 #define CMD_ASK_SIM_TAG 0x021F
95 #define CMD_PSK_SIM_TAG 0x0220
96 #define CMD_AWID_DEMOD_FSK 0x0221
97 #define CMD_VIKING_CLONE_TAG 0x0222
98 #define CMD_T55XX_WAKEUP 0x0224
99 #define CMD_COTAG 0x0225
100
101 /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
102
103 // For the 13.56 MHz tags
104 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
105 #define CMD_READ_SRI_TAG 0x0303
106 #define CMD_ISO_14443B_COMMAND 0x0305
107 #define CMD_READER_ISO_15693 0x0310
108 #define CMD_SIMTAG_ISO_15693 0x0311
109 #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
110 #define CMD_ISO_15693_COMMAND 0x0313
111 #define CMD_ISO_15693_COMMAND_DONE 0x0314
112 #define CMD_ISO_15693_FIND_AFI 0x0315
113 #define CMD_ISO_15693_DEBUG 0x0316
114 #define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
115
116 // For Hitag2 transponders
117 #define CMD_SNOOP_HITAG 0x0370
118 #define CMD_SIMULATE_HITAG 0x0371
119 #define CMD_READER_HITAG 0x0372
120
121 // For HitagS
122 #define CMD_SIMULATE_HITAG_S 0x0368
123 #define CMD_TEST_HITAGS_TRACES 0x0367
124 #define CMD_READ_HITAG_S 0x0373
125 #define CMD_WR_HITAG_S 0x0375
126 #define CMD_EMU_HITAG_S 0x0376
127
128 #define CMD_SIMULATE_TAG_ISO_14443B 0x0381
129 #define CMD_SNOOP_ISO_14443B 0x0382
130 #define CMD_SNOOP_ISO_14443a 0x0383
131 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384
132 #define CMD_READER_ISO_14443a 0x0385
133
134 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
135 #define CMD_READER_LEGIC_RF 0x0388
136 #define CMD_WRITER_LEGIC_RF 0x0389
137
138 #define CMD_EPA_PACE_COLLECT_NONCE 0x038A
139 #define CMD_EPA_PACE_REPLAY 0x038B
140
141 #define CMD_LEGIC_INFO 0x03BC
142 #define CMD_LEGIC_ESET 0x03BD
143 #define CMD_LEGIC_EGET 0x03BE
144
145 #define CMD_SNOOP_ICLASS 0x0392
146 #define CMD_SIMULATE_TAG_ICLASS 0x0393
147 #define CMD_READER_ICLASS 0x0394
148 #define CMD_READER_ICLASS_REPLAY 0x0395
149 #define CMD_ICLASS_ISO14443A_WRITE 0x0397
150 #define CMD_ICLASS_EML_MEMSET 0x0398
151
152 // For measurements of the antenna tuning
153 #define CMD_MEASURE_ANTENNA_TUNING 0x0400
154 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
155 #define CMD_MEASURED_ANTENNA_TUNING 0x0410
156 #define CMD_LISTEN_READER_FIELD 0x0420
157
158 // For direct FPGA control
159 #define CMD_FPGA_MAJOR_MODE_OFF 0x0500
160
161 // For mifare commands
162 #define CMD_MIFARE_SET_DBGMODE 0x0600
163 #define CMD_MIFARE_EML_MEMCLR 0x0601
164 #define CMD_MIFARE_EML_MEMSET 0x0602
165 #define CMD_MIFARE_EML_MEMGET 0x0603
166 #define CMD_MIFARE_EML_CARDLOAD 0x0604
167
168 // magic chinese card commands
169 #define CMD_MIFARE_CSETBLOCK 0x0605
170 #define CMD_MIFARE_CGETBLOCK 0x0606
171 #define CMD_MIFARE_CIDENT 0x0607
172
173 #define CMD_SIMULATE_MIFARE_CARD 0x0610
174
175 #define CMD_READER_MIFARE 0x0611
176 #define CMD_MIFARE_NESTED 0x0612
177 #define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
178
179
180 #define CMD_MIFARE_READBL 0x0620
181 #define CMD_MIFAREU_READBL 0x0720
182 #define CMD_MIFARE_READSC 0x0621
183 #define CMD_MIFAREU_READCARD 0x0721
184 #define CMD_MIFARE_WRITEBL 0x0622
185 #define CMD_MIFAREU_WRITEBL 0x0722
186 #define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
187
188 #define CMD_MIFARE_CHKKEYS 0x0623
189
190 #define CMD_MIFARE_SNIFFER 0x0630
191 //ultralightC
192 #define CMD_MIFAREUC_AUTH 0x0724
193 //0x0725 and 0x0726 no longer used
194 #define CMD_MIFAREUC_SETPWD 0x0727
195
196
197 // mifare desfire
198 #define CMD_MIFARE_DESFIRE_READBL 0x0728
199 #define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
200 #define CMD_MIFARE_DESFIRE_AUTH1 0x072a
201 #define CMD_MIFARE_DESFIRE_AUTH2 0x072b
202 #define CMD_MIFARE_DES_READER 0x072c
203 #define CMD_MIFARE_DESFIRE_INFO 0x072d
204 #define CMD_MIFARE_DESFIRE 0x072e
205
206 #define CMD_MIFARE_COLLECT_NONCES 0x072f
207
208 #define CMD_HF_SNIFFER 0x0800
209
210 #define CMD_UNKNOWN 0xFFFF
211
212
213 //Mifare simulation flags
214 #define FLAG_INTERACTIVE 0x01
215 #define FLAG_4B_UID_IN_DATA 0x02
216 #define FLAG_7B_UID_IN_DATA 0x04
217 #define FLAG_10B_UID_IN_DATA 0x08
218 #define FLAG_UID_IN_EMUL 0x10
219 #define FLAG_NR_AR_ATTACK 0x20
220
221
222 //Iclass reader flags
223 #define FLAG_ICLASS_READER_ONLY_ONCE 0x01
224 #define FLAG_ICLASS_READER_CC 0x02
225 #define FLAG_ICLASS_READER_CSN 0x04
226 #define FLAG_ICLASS_READER_CONF 0x08
227 #define FLAG_ICLASS_READER_AA 0x10
228 #define FLAG_ICLASS_READER_ONE_TRY 0x20
229
230
231
232 // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
233 /* Whether a bootloader that understands the common_area is present */
234 #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
235
236 /* Whether a osimage that understands the common_area is present */
237 #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
238
239 /* Set if the bootloader is currently executing */
240 #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
241
242 /* Set if the OS is currently executing */
243 #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
244
245 /* Set if this device understands the extend start flash command */
246 #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
247
248 /* CMD_START_FLASH may have three arguments: start of area to flash,
249 end of area to flash, optional magic.
250 The bootrom will not allow to overwrite itself unless this magic
251 is given as third parameter */
252
253 #define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
254
255 #endif
Impressum, Datenschutz