1 //-----------------------------------------------------------------------------
2 // Ultralight Code (c) 2013,2014 Midnitesnake & Andy Davies of Pentura
4 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
5 // at your option, any later version. See the LICENSE.txt file for the text of
7 //-----------------------------------------------------------------------------
8 // High frequency MIFARE ULTRALIGHT (C) commands
9 //-----------------------------------------------------------------------------
15 #include "proxmark3.h"
19 #include "loclass/des.h"
24 #include "protocols.h"
27 #define MAX_UL_BLOCKS 0x0f
28 #define MAX_ULC_BLOCKS 0x2b
29 #define MAX_ULEV1a_BLOCKS 0x13
30 #define MAX_ULEV1b_BLOCKS 0x28
31 #define MAX_NTAG_203 0x29
32 #define MAX_NTAG_210 0x13
33 #define MAX_NTAG_212 0x28
34 #define MAX_NTAG_213 0x2c
35 #define MAX_NTAG_215 0x86
36 #define MAX_NTAG_216 0xe6
37 #define MAX_MY_D_NFC 0xff
38 #define MAX_MY_D_MOVE 0x25
39 #define MAX_MY_D_MOVE_LEAN 0x0f
41 #define KEYS_3DES_COUNT 7
42 uint8_t default_3des_keys
[KEYS_3DES_COUNT
][16] = {
43 { 0x42,0x52,0x45,0x41,0x4b,0x4d,0x45,0x49,0x46,0x59,0x4f,0x55,0x43,0x41,0x4e,0x21 },// 3des std key
44 { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 },// all zeroes
45 { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f },// 0x00-0x0F
46 { 0x49,0x45,0x4D,0x4B,0x41,0x45,0x52,0x42,0x21,0x4E,0x41,0x43,0x55,0x4F,0x59,0x46 },// NFC-key
47 { 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 },// all ones
48 { 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF },// all FF
49 { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF } // 11 22 33
52 #define KEYS_PWD_COUNT 10
53 uint8_t default_pwd_pack
[KEYS_PWD_COUNT
][4] = {
54 {0xFF,0xFF,0xFF,0xFF}, // PACK 0x00,0x00 -- factory default
56 {0x4A,0xF8,0x4B,0x19}, // PACK 0xE5,0xBE -- italian bus (sniffed)
57 {0x33,0x6B,0xA1,0x19}, // PACK 0x9c,0x2d -- italian bus (sniffed)
58 {0xFF,0x90,0x6C,0xB2}, // PACK 0x12,0x9e -- italian bus (sniffed)
59 {0x46,0x1c,0xA3,0x19}, // PACK 0xE9,0x5A -- italian bus (sniffed)
60 {0x35,0x1C,0xD0,0x19}, // PACK 0x9A,0x5a -- italian bus (sniffed)
62 {0x05,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- Amiiboo (sniffed) pikachu-b UID:
63 {0x7E,0x22,0xE6,0xB4}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
64 {0x02,0xE1,0xEE,0x36}, // PACK 0x80,0x80 -- AMiiboo (sniffed) sonic UID: 04d257 7ae33e8027
65 {0x32,0x0C,0x16,0x17}, // PACK 0x80,0x80 -- AMiiboo (sniffed)
68 #define MAX_UL_TYPES 18
69 uint32_t UL_TYPES_ARRAY
[MAX_UL_TYPES
] = {UNKNOWN
, UL
, UL_C
, UL_EV1_48
, UL_EV1_128
, NTAG
, NTAG_203
,
70 NTAG_210
, NTAG_212
, NTAG_213
, NTAG_215
, NTAG_216
, MY_D
, MY_D_NFC
, MY_D_MOVE
, MY_D_MOVE_NFC
, MY_D_MOVE_LEAN
, FUDAN_UL
};
72 uint8_t UL_MEMORY_ARRAY
[MAX_UL_TYPES
] = {MAX_UL_BLOCKS
, MAX_UL_BLOCKS
, MAX_ULC_BLOCKS
, MAX_ULEV1a_BLOCKS
,
73 MAX_ULEV1b_BLOCKS
, MAX_NTAG_203
, MAX_NTAG_203
, MAX_NTAG_210
, MAX_NTAG_212
, MAX_NTAG_213
,
74 MAX_NTAG_215
, MAX_NTAG_216
, MAX_UL_BLOCKS
, MAX_MY_D_NFC
, MAX_MY_D_MOVE
, MAX_MY_D_MOVE
, MAX_MY_D_MOVE_LEAN
, MAX_UL_BLOCKS
};
77 static int CmdHelp(const char *Cmd
);
79 // get version nxp product type
80 char *getProductTypeStr( uint8_t id
){
86 case 3: sprintf(retStr
, "%02X, Ultralight", id
); break;
87 case 4: sprintf(retStr
, "%02X, NTAG", id
); break;
88 default: sprintf(retStr
, "%02X, unknown", id
); break;
94 The 7 MSBits (=n) code the storage size itself based on 2^n,
95 the LSBit is set to '0' if the size is exactly 2^n
96 and set to '1' if the storage size is between 2^n and 2^(n+1).
98 char *getUlev1CardSizeStr( uint8_t fsize
){
102 memset(buf
, 0, sizeof(buf
));
104 uint16_t usize
= 1 << ((fsize
>>1) + 1);
105 uint16_t lsize
= 1 << (fsize
>>1);
109 sprintf(retStr
, "%02X, (%u <-> %u bytes)",fsize
, usize
, lsize
);
111 sprintf(retStr
, "%02X, (%u bytes)", fsize
, lsize
);
115 static void ul_switch_on_field(void) {
116 UsbCommand c
= {CMD_READER_ISO_14443a
, {ISO14A_CONNECT
| ISO14A_NO_DISCONNECT
, 0, 0}};
117 clearCommandBuffer();
121 void ul_switch_off_field(void) {
122 UsbCommand c
= {CMD_READER_ISO_14443a
, {0, 0, 0}};
123 clearCommandBuffer();
127 static int ul_send_cmd_raw( uint8_t *cmd
, uint8_t cmdlen
, uint8_t *response
, uint16_t responseLength
) {
128 UsbCommand c
= {CMD_READER_ISO_14443a
, {ISO14A_RAW
| ISO14A_NO_DISCONNECT
| ISO14A_APPEND_CRC
, cmdlen
, 0}};
129 memcpy(c
.d
.asBytes
, cmd
, cmdlen
);
130 clearCommandBuffer();
133 if (!WaitForResponseTimeout(CMD_ACK
, &resp
, 1500)) return -1;
134 if (!resp
.arg
[0] && responseLength
) return -1;
136 uint16_t resplen
= (resp
.arg
[0] < responseLength
) ? resp
.arg
[0] : responseLength
;
137 memcpy(response
, resp
.d
.asBytes
, resplen
);
141 static int ul_send_cmd_raw_crc( uint8_t *cmd, uint8_t cmdlen, uint8_t *response, uint16_t responseLength, bool append_crc ) {
142 UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_NO_DISCONNECT , cmdlen, 0}};
144 c.arg[0] |= ISO14A_APPEND_CRC;
146 memcpy(c.d.asBytes, cmd, cmdlen);
147 clearCommandBuffer();
150 if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) return -1;
151 if (!resp.arg[0] && responseLength) return -1;
153 uint16_t resplen = (resp.arg[0] < responseLength) ? resp.arg[0] : responseLength;
154 memcpy(response, resp.d.asBytes, resplen);
158 static int ul_select( iso14a_card_select_t
*card
){
160 ul_switch_on_field();
164 ans
= WaitForResponseTimeout(CMD_ACK
, &resp
, 1500);
165 if (!ans
|| resp
.arg
[0] < 1) {
166 PrintAndLog("iso14443a card select failed");
167 ul_switch_off_field();
171 memcpy(card
, resp
.d
.asBytes
, sizeof(iso14a_card_select_t
));
175 // This read command will at least return 16bytes.
176 static int ul_read( uint8_t page
, uint8_t *response
, uint16_t responseLength
){
178 uint8_t cmd
[] = {ISO14443A_CMD_READBLOCK
, page
};
179 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
183 static int ul_comp_write( uint8_t page
, uint8_t *data
, uint8_t datalen
){
186 memset(cmd
, 0x00, sizeof(cmd
));
187 datalen
= ( datalen
> 16) ? 16 : datalen
;
189 cmd
[0] = ISO14443A_CMD_WRITEBLOCK
;
191 memcpy(cmd
+2, data
, datalen
);
193 uint8_t response
[1] = {0xff};
194 ul_send_cmd_raw(cmd
, 2+datalen
, response
, sizeof(response
));
196 if ( response
[0] == 0x0a ) return 0;
201 static int ulc_requestAuthentication( uint8_t *nonce
, uint16_t nonceLength
){
203 uint8_t cmd
[] = {MIFARE_ULC_AUTH_1
, 0x00};
204 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), nonce
, nonceLength
);
208 static int ulc_authentication( uint8_t *key
, bool switch_off_field
){
210 UsbCommand c
= {CMD_MIFAREUC_AUTH
, {switch_off_field
}};
211 memcpy(c
.d
.asBytes
, key
, 16);
212 clearCommandBuffer();
215 if ( !WaitForResponseTimeout(CMD_ACK
, &resp
, 1500) ) return 0;
216 if ( resp
.arg
[0] == 1 ) return 1;
221 static int ulev1_requestAuthentication( uint8_t *pwd
, uint8_t *pack
, uint16_t packLength
){
223 uint8_t cmd
[] = {MIFARE_ULEV1_AUTH
, pwd
[0], pwd
[1], pwd
[2], pwd
[3]};
224 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), pack
, packLength
);
228 static int ul_auth_select( iso14a_card_select_t
*card
, TagTypeUL_t tagtype
, bool hasAuthKey
, uint8_t *authenticationkey
, uint8_t *pack
, uint8_t packSize
){
229 if ( hasAuthKey
&& (tagtype
& UL_C
)) {
230 //will select card automatically and close connection on error
231 if (!ulc_authentication(authenticationkey
, false)) {
232 PrintAndLog("Error: Authentication Failed UL-C");
236 if ( !ul_select(card
) ) return 0;
239 if (ulev1_requestAuthentication(authenticationkey
, pack
, packSize
) < 1) {
240 ul_switch_off_field();
241 PrintAndLog("Error: Authentication Failed UL-EV1/NTAG");
249 static int ulev1_getVersion( uint8_t *response
, uint16_t responseLength
){
251 uint8_t cmd
[] = {MIFARE_ULEV1_VERSION
};
252 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
256 // static int ulev1_fastRead( uint8_t startblock, uint8_t endblock, uint8_t *response ){
258 // uint8_t cmd[] = {MIFARE_ULEV1_FASTREAD, startblock, endblock};
260 // if ( !ul_send_cmd_raw(cmd, sizeof(cmd), response)){
266 static int ulev1_readCounter( uint8_t counter
, uint8_t *response
, uint16_t responseLength
){
268 uint8_t cmd
[] = {MIFARE_ULEV1_READ_CNT
, counter
};
269 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
273 static int ulev1_readTearing( uint8_t counter
, uint8_t *response
, uint16_t responseLength
){
275 uint8_t cmd
[] = {MIFARE_ULEV1_CHECKTEAR
, counter
};
276 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
280 static int ulev1_readSignature( uint8_t *response
, uint16_t responseLength
){
282 uint8_t cmd
[] = {MIFARE_ULEV1_READSIG
, 0x00};
283 int len
= ul_send_cmd_raw(cmd
, sizeof(cmd
), response
, responseLength
);
288 // Fudan check checks for which error is given for a command with incorrect crc
289 // NXP UL chip responds with 01, fudan 00.
290 // other possible checks:
292 // UL responds with 00, fudan doesn't respond
295 // UL doesn't respond, fudan responds with 00
297 // send 300000 + crc (read with extra byte(s))
298 // UL responds with read of page 0, fudan doesn't respond.
300 // make sure field is off before calling this function
301 static int ul_fudan_check( void ){
302 iso14a_card_select_t card
;
303 if ( !ul_select(&card
) )
306 UsbCommand c
= {CMD_READER_ISO_14443a
, {ISO14A_RAW
| ISO14A_NO_DISCONNECT
, 4, 0}};
308 uint8_t cmd
[4] = {0x30,0x00,0x02,0xa7}; //wrong crc on purpose should be 0xa8
309 memcpy(c
.d
.asBytes
, cmd
, 4);
310 clearCommandBuffer();
313 if (!WaitForResponseTimeout(CMD_ACK
, &resp
, 1500)) return UL_ERROR
;
314 if (resp
.arg
[0] != 1) return UL_ERROR
;
316 return (!resp
.d
.asBytes
[0]) ? FUDAN_UL
: UL
; //if response == 0x00 then Fudan, else Genuine NXP
319 static int ul_print_default( uint8_t *data
){
330 PrintAndLog(" UID : %s ", sprint_hex(uid
, 7));
331 PrintAndLog(" UID[0] : %02X, %s", uid
[0], getTagInfo(uid
[0]) );
332 if ( uid
[0] == 0x05 && ((uid
[1] & 0xf0) >> 4) == 2 ) { // is infineon and 66RxxP
333 uint8_t chip
= (data
[8] & 0xC7); // 11000111 mask, bit 3,4,5 RFU
335 case 0xc2: PrintAndLog(" IC type : SLE 66R04P 770 Bytes"); break; //77 pages
336 case 0xc4: PrintAndLog(" IC type : SLE 66R16P 2560 Bytes"); break; //256 pages
337 case 0xc6: PrintAndLog(" IC type : SLE 66R32P 5120 Bytes"); break; //512 pages /2 sectors
340 // CT (cascade tag byte) 0x88 xor SN0 xor SN1 xor SN2
341 int crc0
= 0x88 ^ data
[0] ^ data
[1] ^data
[2];
342 if ( data
[3] == crc0
)
343 PrintAndLog(" BCC0 : %02X, Ok", data
[3]);
345 PrintAndLog(" BCC0 : %02X, crc should be %02X", data
[3], crc0
);
347 int crc1
= data
[4] ^ data
[5] ^ data
[6] ^data
[7];
348 if ( data
[8] == crc1
)
349 PrintAndLog(" BCC1 : %02X, Ok", data
[8]);
351 PrintAndLog(" BCC1 : %02X, crc should be %02X", data
[8], crc1
);
353 PrintAndLog(" Internal : %02X, %sdefault", data
[9], (data
[9]==0x48)?"":"not " );
355 PrintAndLog(" Lock : %s - %s",
356 sprint_hex(data
+10, 2),
357 printBits(2, data
+10)
360 PrintAndLog("OneTimePad : %s - %s\n",
361 sprint_hex(data
+ 12, 4),
362 printBits(4, data
+12)
368 static int ndef_print_CC(uint8_t *data
) {
373 PrintAndLog("--- NDEF Message");
374 PrintAndLog("Capability Container: %s", sprint_hex(data
,4) );
375 PrintAndLog(" %02X : NDEF Magic Number", data
[0]);
376 PrintAndLog(" %02X : version %d.%d supported by tag", data
[1], (data
[1] & 0xF0) >> 4, data
[1] & 0x0f);
377 PrintAndLog(" %02X : Physical Memory Size: %d bytes", data
[2], (data
[2] + 1) * 8);
378 if ( data
[2] == 0x12 )
379 PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data
[2], 144);
380 else if ( data
[2] == 0x3e )
381 PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data
[2], 496);
382 else if ( data
[2] == 0x6d )
383 PrintAndLog(" %02X : NDEF Memory Size: %d bytes", data
[2], 872);
385 PrintAndLog(" %02X : %s / %s", data
[3],
386 (data
[3] & 0xF0) ? "(RFU)" : "Read access granted without any security",
387 (data
[3] & 0x0F)==0 ? "Write access granted without any security" : (data
[3] & 0x0F)==0x0F ? "No write access granted at all" : "(RFU)");
391 int ul_print_type(uint32_t tagtype
, uint8_t spaces
){
394 char *spacer
= spc
+ (10-spaces
);
397 PrintAndLog("%sTYPE : MIFARE Ultralight (MF0ICU1) %s", spacer
, (tagtype
& MAGIC
) ? "<magic>" : "" );
398 else if ( tagtype
& UL_C
)
399 PrintAndLog("%sTYPE : MIFARE Ultralight C (MF0ULC) %s", spacer
, (tagtype
& MAGIC
) ? "<magic>" : "" );
400 else if ( tagtype
& UL_EV1_48
)
401 PrintAndLog("%sTYPE : MIFARE Ultralight EV1 48bytes (MF0UL1101)", spacer
);
402 else if ( tagtype
& UL_EV1_128
)
403 PrintAndLog("%sTYPE : MIFARE Ultralight EV1 128bytes (MF0UL2101)", spacer
);
404 else if ( tagtype
& NTAG
)
405 PrintAndLog("%sTYPE : NTAG UNKNOWN", spacer
);
406 else if ( tagtype
& NTAG_203
)
407 PrintAndLog("%sTYPE : NTAG 203 144bytes (NT2H0301F0DT)", spacer
);
408 else if ( tagtype
& NTAG_210
)
409 PrintAndLog("%sTYPE : NTAG 210 48bytes (NT2L1011G0DU)", spacer
);
410 else if ( tagtype
& NTAG_212
)
411 PrintAndLog("%sTYPE : NTAG 212 128bytes (NT2L1211G0DU)", spacer
);
412 else if ( tagtype
& NTAG_213
)
413 PrintAndLog("%sTYPE : NTAG 213 144bytes (NT2H1311G0DU)", spacer
);
414 else if ( tagtype
& NTAG_215
)
415 PrintAndLog("%sTYPE : NTAG 215 504bytes (NT2H1511G0DU)", spacer
);
416 else if ( tagtype
& NTAG_216
)
417 PrintAndLog("%sTYPE : NTAG 216 888bytes (NT2H1611G0DU)", spacer
);
418 else if ( tagtype
& NTAG_I2C_1K
)
419 PrintAndLog("%sTYPE : NTAG I%sC 888bytes (NT3H1101FHK)", spacer
, "\xFD");
420 else if ( tagtype
& NTAG_I2C_2K
)
421 PrintAndLog("%sTYPE : NTAG I%sC 1904bytes (NT3H1201FHK)", spacer
, "\xFD");
422 else if ( tagtype
& MY_D
)
423 PrintAndLog("%sTYPE : INFINEON my-d\x99 (SLE 66RxxS)", spacer
);
424 else if ( tagtype
& MY_D_NFC
)
425 PrintAndLog("%sTYPE : INFINEON my-d\x99 NFC (SLE 66RxxP)", spacer
);
426 else if ( tagtype
& MY_D_MOVE
)
427 PrintAndLog("%sTYPE : INFINEON my-d\x99 move (SLE 66R01P)", spacer
);
428 else if ( tagtype
& MY_D_MOVE_NFC
)
429 PrintAndLog("%sTYPE : INFINEON my-d\x99 move NFC (SLE 66R01P)", spacer
);
430 else if ( tagtype
& MY_D_MOVE_LEAN
)
431 PrintAndLog("%sTYPE : INFINEON my-d\x99 move lean (SLE 66R01L)", spacer
);
432 else if ( tagtype
& FUDAN_UL
)
433 PrintAndLog("%sTYPE : FUDAN Ultralight Compatible (or other compatible) %s", spacer
, (tagtype
& MAGIC
) ? "<magic>" : "" );
435 PrintAndLog("%sTYPE : Unknown %06x", spacer
, tagtype
);
439 static int ulc_print_3deskey( uint8_t *data
){
440 PrintAndLog(" deskey1 [44/0x2C] : %s [%.4s]", sprint_hex(data
,4),data
);
441 PrintAndLog(" deskey1 [45/0x2D] : %s [%.4s]", sprint_hex(data
+4 ,4),data
+4);
442 PrintAndLog(" deskey2 [46/0x2E] : %s [%.4s]", sprint_hex(data
+8 ,4),data
+8);
443 PrintAndLog(" deskey2 [47/0x2F] : %s [%.4s]", sprint_hex(data
+12,4),data
+12);
444 PrintAndLog("\n 3des key : %s", sprint_hex(SwapEndian64(data
, 16, 8), 16));
448 static int ulc_print_configuration( uint8_t *data
){
450 PrintAndLog("--- UL-C Configuration");
451 PrintAndLog(" Higher Lockbits [40/0x28] : %s - %s", sprint_hex(data
, 4), printBits(2, data
));
452 PrintAndLog(" Counter [41/0x29] : %s - %s", sprint_hex(data
+4, 4), printBits(2, data
+4));
454 bool validAuth
= (data
[8] >= 0x03 && data
[8] <= 0x30);
456 PrintAndLog(" Auth0 [42/0x2A] : %s page %d/0x%02X and above need authentication", sprint_hex(data
+8, 4), data
[8],data
[8] );
459 PrintAndLog(" Auth0 [42/0x2A] : %s default", sprint_hex(data
+8, 4) );
461 PrintAndLog(" Auth0 [42/0x2A] : %s auth byte is out-of-range", sprint_hex(data
+8, 4) );
464 PrintAndLog(" Auth1 [43/0x2B] : %s %s",
465 sprint_hex(data
+12, 4),
466 (data
[12] & 1) ? "write access restricted": "read and write access restricted"
471 static int ulev1_print_configuration( uint8_t *data
, uint8_t startPage
){
473 PrintAndLog("\n--- Tag Configuration");
475 bool strg_mod_en
= (data
[0] & 2);
476 uint8_t authlim
= (data
[4] & 0x07);
477 bool cfglck
= (data
[4] & 0x40);
478 bool prot
= (data
[4] & 0x80);
479 uint8_t vctid
= data
[5];
481 PrintAndLog(" cfg0 [%u/0x%02X] : %s", startPage
, startPage
, sprint_hex(data
, 4));
482 if ( data
[3] < 0xff )
483 PrintAndLog(" - page %d and above need authentication",data
[3]);
485 PrintAndLog(" - pages don't need authentication");
486 PrintAndLog(" - strong modulation mode %s", (strg_mod_en
) ? "enabled":"disabled");
487 PrintAndLog(" cfg1 [%u/0x%02X] : %s", startPage
+ 1, startPage
+ 1, sprint_hex(data
+4, 4) );
489 PrintAndLog(" - Unlimited password attempts");
491 PrintAndLog(" - Max number of password attempts is %d", authlim
);
492 PrintAndLog(" - user configuration %s", cfglck
? "permanently locked":"writeable");
493 PrintAndLog(" - %s access is protected with password", prot
? "read and write":"write");
494 PrintAndLog(" - %02X, Virtual Card Type Identifier is %s default", vctid
, (vctid
==0x05)? "":"not");
495 PrintAndLog(" PWD [%u/0x%02X] : %s- (cannot be read)", startPage
+ 2, startPage
+ 2, sprint_hex(data
+8, 4));
496 PrintAndLog(" PACK [%u/0x%02X] : %s - (cannot be read)", startPage
+ 3, startPage
+ 3, sprint_hex(data
+12, 2));
497 PrintAndLog(" RFU [%u/0x%02X] : %s- (cannot be read)", startPage
+ 3, startPage
+ 3, sprint_hex(data
+12, 2));
501 static int ulev1_print_counters(){
502 PrintAndLog("--- Tag Counters");
503 uint8_t tear
[1] = {0};
504 uint8_t counter
[3] = {0,0,0};
506 for ( uint8_t i
= 0; i
<3; ++i
) {
507 ulev1_readTearing(i
,tear
,sizeof(tear
));
508 len
= ulev1_readCounter(i
,counter
, sizeof(counter
) );
510 PrintAndLog(" [%0d] : %s", i
, sprint_hex(counter
,3));
511 PrintAndLog(" - %02X tearing %s", tear
[0], ( tear
[0]==0xBD)?"Ok":"failure");
517 static int ulev1_print_signature( uint8_t *data
, uint8_t len
){
518 PrintAndLog("\n--- Tag Signature");
519 //PrintAndLog("IC signature public key name : NXP NTAG21x 2013"); // don't know if there is other NXP public keys.. :(
520 PrintAndLog("IC signature public key value : 04494e1a386d3d3cfe3dc10e5de68a499b1c202db5b132393e89ed19fe5be8bc61");
521 PrintAndLog(" Elliptic curve parameters : secp128r1");
522 PrintAndLog(" Tag ECC Signature : %s", sprint_hex(data
, len
));
523 //to do: verify if signature is valid
524 //PrintAndLog("IC signature status: %s valid", (iseccvalid() )?"":"not");
528 static int ulev1_print_version(uint8_t *data
){
529 PrintAndLog("\n--- Tag Version");
530 PrintAndLog(" Raw bytes : %s",sprint_hex(data
, 8) );
531 PrintAndLog(" Vendor ID : %02X, %s", data
[1], getTagInfo(data
[1]));
532 PrintAndLog(" Product type : %s", getProductTypeStr(data
[2]));
533 PrintAndLog(" Product subtype : %02X, %s", data
[3], (data
[3]==1) ?"17 pF":"50pF");
534 PrintAndLog(" Major version : %02X", data
[4]);
535 PrintAndLog(" Minor version : %02X", data
[5]);
536 PrintAndLog(" Size : %s", getUlev1CardSizeStr(data
[6]));
537 PrintAndLog(" Protocol type : %02X", data
[7]);
542 static int ulc_magic_test(){
543 // Magic Ultralight test
544 // Magic UL-C, by observation,
545 // 1) it seems to have a static nonce response to 0x1A command.
546 // 2) the deskey bytes is not-zero:d out on as datasheet states.
547 // 3) UID - changeable, not only, but pages 0-1-2-3.
548 // 4) use the ul_magic_test ! magic tags answers specially!
549 int returnValue = UL_ERROR;
550 iso14a_card_select_t card;
551 uint8_t nonce1[11] = {0x00};
552 uint8_t nonce2[11] = {0x00};
553 int status = ul_select(&card);
557 status = ulc_requestAuthentication(nonce1, sizeof(nonce1));
559 status = ulc_requestAuthentication(nonce2, sizeof(nonce2));
560 returnValue = ( !memcmp(nonce1, nonce2, 11) ) ? UL_C_MAGIC : UL_C;
564 ul_switch_off_field();
568 static int ul_magic_test(){
570 // Magic Ultralight tests
571 // 1) take present UID, and try to write it back. OBSOLETE
572 // 2) make a wrong length write to page0, and see if tag answers with ACK/NACK:
573 iso14a_card_select_t card
;
574 if ( !ul_select(&card
) )
576 int status
= ul_comp_write(0, NULL
, 0);
577 ul_switch_off_field();
583 uint32_t GetHF14AMfU_Type(void){
585 TagTypeUL_t tagtype
= UNKNOWN
;
586 iso14a_card_select_t card
;
587 uint8_t version
[10] = {0x00};
591 if (!ul_select(&card
)) return UL_ERROR
;
593 // Ultralight - ATQA / SAK
594 if ( card
.atqa
[1] != 0x00 || card
.atqa
[0] != 0x44 || card
.sak
!= 0x00 ) {
595 PrintAndLog("Tag is not Ultralight | NTAG | MY-D [ATQA: %02X %02X SAK: %02X]\n", card
.atqa
[1], card
.atqa
[0], card
.sak
);
596 ul_switch_off_field();
600 if ( card
.uid
[0] != 0x05) {
602 len
= ulev1_getVersion(version
, sizeof(version
));
603 ul_switch_off_field();
608 if ( version
[2] == 0x03 && version
[6] == 0x0B )
610 else if ( version
[2] == 0x03 && version
[6] != 0x0B )
611 tagtype
= UL_EV1_128
;
612 else if ( version
[2] == 0x04 && version
[3] == 0x01 && version
[6] == 0x0B )
614 else if ( version
[2] == 0x04 && version
[3] == 0x01 && version
[6] == 0x0E )
616 else if ( version
[2] == 0x04 && version
[3] == 0x02 && version
[6] == 0x0F )
618 else if ( version
[2] == 0x04 && version
[3] == 0x02 && version
[6] == 0x11 )
620 else if ( version
[2] == 0x04 && version
[3] == 0x02 && version
[6] == 0x13 )
622 else if ( version
[2] == 0x04 && version
[3] == 0x05 && version
[6] == 0x13 )
623 tagtype
= NTAG_I2C_1K
;
624 else if ( version
[2] == 0x04 && version
[3] == 0x05 && version
[6] == 0x15 )
625 tagtype
= NTAG_I2C_2K
;
626 else if ( version
[2] == 0x04 )
631 case 0x01: tagtype
= UL_C
; break;
632 case 0x00: tagtype
= UL
; break;
633 case -1 : tagtype
= (UL
| UL_C
| NTAG_203
); break; // could be UL | UL_C magic tags
634 default : tagtype
= UNKNOWN
; break;
636 // UL vs UL-C vs ntag203 test
637 if (tagtype
& (UL
| UL_C
| NTAG_203
)) {
638 if ( !ul_select(&card
) ) return UL_ERROR
;
640 // do UL_C check first...
641 uint8_t nonce
[11] = {0x00};
642 status
= ulc_requestAuthentication(nonce
, sizeof(nonce
));
643 ul_switch_off_field();
647 // need to re-select after authentication error
648 if ( !ul_select(&card
) ) return UL_ERROR
;
650 uint8_t data
[16] = {0x00};
651 // read page 0x26-0x29 (last valid ntag203 page)
652 status
= ul_read(0x26, data
, sizeof(data
));
656 // read page 0x30 (should error if it is a ntag203)
657 status
= ul_read(0x30, data
, sizeof(data
));
664 ul_switch_off_field();
668 tagtype
= ul_fudan_check();
669 ul_switch_off_field();
672 ul_switch_off_field();
673 // Infinition MY-D tests Exam high nibble
674 uint8_t nib
= (card
.uid
[1] & 0xf0) >> 4;
676 // case 0: tagtype = SLE66R35E7; break; //or SLE 66R35E7 - mifare compat... should have different sak/atqa for mf 1k
677 case 1: tagtype
= MY_D
; break; //or SLE 66RxxS ... up to 512 pages of 8 user bytes...
678 case 2: tagtype
= (MY_D_NFC
); break; //or SLE 66RxxP ... up to 512 pages of 8 user bytes... (or in nfc mode FF pages of 4 bytes)
679 case 3: tagtype
= (MY_D_MOVE
| MY_D_MOVE_NFC
); break; //or SLE 66R01P // 38 pages of 4 bytes //notice: we can not currently distinguish between these two
680 case 7: tagtype
= MY_D_MOVE_LEAN
; break; //or SLE 66R01L // 16 pages of 4 bytes
684 tagtype
|= ul_magic_test();
685 if (tagtype
== (UNKNOWN
| MAGIC
)) tagtype
= (UL_MAGIC
);
689 int CmdHF14AMfUInfo(const char *Cmd
){
691 uint8_t authlim
= 0xff;
692 uint8_t data
[16] = {0x00};
693 iso14a_card_select_t card
;
696 bool hasAuthKey
= false;
698 bool swapEndian
= false;
701 uint8_t authenticationkey
[16] = {0x00};
702 uint8_t *authkeyptr
= authenticationkey
;
704 uint8_t pack
[4] = {0,0,0,0};
708 while(param_getchar(Cmd
, cmdp
) != 0x00)
710 switch(param_getchar(Cmd
, cmdp
))
714 return usage_hf_mfu_info();
717 dataLen
= param_getstr(Cmd
, cmdp
+1, tempStr
);
718 if (dataLen
== 32 || dataLen
== 8) { //ul-c or ev1/ntag key length
719 errors
= param_gethex(tempStr
, 0, authenticationkey
, dataLen
);
720 dataLen
/= 2; // handled as bytes from now on
722 PrintAndLog("\nERROR: Key is incorrect length\n");
734 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
742 if(errors
) return usage_hf_mfu_info();
744 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
745 if (tagtype
== UL_ERROR
) return -1;
747 PrintAndLog("\n--- Tag Information ---------");
748 PrintAndLog("-------------------------------------------------------------");
749 ul_print_type(tagtype
, 6);
752 if (swapEndian
&& hasAuthKey
) authkeyptr
= SwapEndian64(authenticationkey
, dataLen
, (dataLen
== 16) ? 8 : 4 );
754 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
756 // read pages 0,1,2,3 (should read 4pages)
757 status
= ul_read(0, data
, sizeof(data
));
758 if ( status
== -1 ) {
759 ul_switch_off_field();
760 PrintAndLog("Error: tag didn't answer to READ");
762 } else if (status
== 16) {
763 ul_print_default(data
);
764 ndef_print_CC(data
+12);
770 if ((tagtype
& UL_C
)) {
772 // read pages 0x28, 0x29, 0x2A, 0x2B
773 uint8_t ulc_conf
[16] = {0x00};
774 status
= ul_read(0x28, ulc_conf
, sizeof(ulc_conf
));
776 PrintAndLog("Error: tag didn't answer to READ UL-C");
777 ul_switch_off_field();
780 if (status
== 16) ulc_print_configuration(ulc_conf
);
783 if ((tagtype
& MAGIC
)) {
785 uint8_t ulc_deskey
[16] = {0x00};
786 status
= ul_read(0x2C, ulc_deskey
, sizeof(ulc_deskey
));
787 if ( status
== -1 ) {
788 ul_switch_off_field();
789 PrintAndLog("Error: tag didn't answer to READ magic");
792 if (status
== 16) ulc_print_3deskey(ulc_deskey
);
795 ul_switch_off_field();
796 // if we called info with key, just return
797 if ( hasAuthKey
) return 1;
799 // also try to diversify default keys.. look into CmdHF14AMfuGenDiverseKeys
800 PrintAndLog("Trying some default 3des keys");
801 for (uint8_t i
= 0; i
< KEYS_3DES_COUNT
; ++i
) {
802 key
= default_3des_keys
[i
];
803 if (ulc_authentication(key
, true)) {
804 PrintAndLog("Found default 3des key: ");
806 memcpy(keySwap
, SwapEndian64(key
,16,8), 16);
807 ulc_print_3deskey(keySwap
);
815 // do counters and signature first (don't neet auth)
817 // ul counters are different than ntag counters
818 if ((tagtype
& (UL_EV1_48
| UL_EV1_128
))) {
819 if (ulev1_print_counters() != 3) {
820 // failed - re-select
821 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
825 if ((tagtype
& (UL_EV1_48
| UL_EV1_128
| NTAG_213
| NTAG_215
| NTAG_216
| NTAG_I2C_1K
| NTAG_I2C_2K
))) {
826 uint8_t ulev1_signature
[32] = {0x00};
827 status
= ulev1_readSignature( ulev1_signature
, sizeof(ulev1_signature
));
828 if ( status
== -1 ) {
829 PrintAndLog("Error: tag didn't answer to READ SIGNATURE");
830 ul_switch_off_field();
833 if (status
== 32) ulev1_print_signature( ulev1_signature
, sizeof(ulev1_signature
));
836 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
840 if ((tagtype
& (UL_EV1_48
| UL_EV1_128
| NTAG_210
| NTAG_212
| NTAG_213
| NTAG_215
| NTAG_216
| NTAG_I2C_1K
| NTAG_I2C_2K
))) {
841 uint8_t version
[10] = {0x00};
842 status
= ulev1_getVersion(version
, sizeof(version
));
843 if ( status
== -1 ) {
844 PrintAndLog("Error: tag didn't answer to GETVERSION");
845 ul_switch_off_field();
847 } else if (status
== 10) {
848 ulev1_print_version(version
);
851 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
854 uint8_t startconfigblock
= 0;
855 uint8_t ulev1_conf
[16] = {0x00};
856 // config blocks always are last 4 pages
857 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++)
858 if (tagtype
& UL_TYPES_ARRAY
[idx
])
859 startconfigblock
= UL_MEMORY_ARRAY
[idx
]-3;
861 if (startconfigblock
){ // if we know where the config block is...
862 status
= ul_read(startconfigblock
, ulev1_conf
, sizeof(ulev1_conf
));
863 if ( status
== -1 ) {
864 PrintAndLog("Error: tag didn't answer to READ EV1");
865 ul_switch_off_field();
867 } else if (status
== 16) {
868 // save AUTHENTICATION LIMITS for later:
869 authlim
= (ulev1_conf
[4] & 0x07);
870 ulev1_print_configuration(ulev1_conf
, startconfigblock
);
874 // AUTHLIMIT, (number of failed authentications)
876 // 1-7 = limit. No automatic tries then.
877 // hasAuthKey, if we was called with key, skip test.
878 if ( !authlim
&& !hasAuthKey
) {
879 PrintAndLog("\n--- Known EV1/NTAG passwords.");
881 for (uint8_t i
= 0; i
< KEYS_PWD_COUNT
; ++i
) {
882 key
= default_pwd_pack
[i
];
883 len
= ulev1_requestAuthentication(key
, pack
, sizeof(pack
));
885 PrintAndLog("Found a default password: %s || Pack: %02X %02X",sprint_hex(key
, 4), pack
[0], pack
[1]);
888 if (!ul_auth_select( &card
, tagtype
, hasAuthKey
, authkeyptr
, pack
, sizeof(pack
))) return -1;
891 if (len
< 1) PrintAndLog("password not known");
895 ul_switch_off_field();
896 if (locked
) PrintAndLog("\nTag appears to be locked, try using the key to get more info");
902 // Write Single Block
904 int CmdHF14AMfUWrBl(const char *Cmd
){
908 bool hasAuthKey
= false;
909 bool hasPwdKey
= false;
910 bool swapEndian
= false;
914 uint8_t blockdata
[20] = {0x00};
915 uint8_t data
[16] = {0x00};
916 uint8_t authenticationkey
[16] = {0x00};
917 uint8_t *authKeyPtr
= authenticationkey
;
919 while(param_getchar(Cmd
, cmdp
) != 0x00)
921 switch(param_getchar(Cmd
, cmdp
))
925 return usage_hf_mfu_wrbl();
929 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 8);
931 memcpy(authenticationkey
, data
, 4);
937 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 32);
939 memcpy(authenticationkey
, data
, 16);
944 PrintAndLog("\nERROR: Key is incorrect length\n");
949 blockNo
= param_get8(Cmd
, cmdp
+1);
951 PrintAndLog("Wrong block number");
963 if ( param_gethex(Cmd
, cmdp
+1, blockdata
, 8) ) {
964 PrintAndLog("Block data must include 8 HEX symbols");
971 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
976 if(errors
) return usage_hf_mfu_wrbl();
979 if ( blockNo
== -1 ) return usage_hf_mfu_wrbl();
980 // starting with getting tagtype
981 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
982 if (tagtype
== UL_ERROR
) return -1;
984 uint8_t maxblockno
= 0;
985 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++){
986 if (tagtype
& UL_TYPES_ARRAY
[idx
])
987 maxblockno
= UL_MEMORY_ARRAY
[idx
];
989 if (blockNo
> maxblockno
){
990 PrintAndLog("block number too large. Max block is %u/0x%02X \n", maxblockno
,maxblockno
);
991 return usage_hf_mfu_wrbl();
995 if (swapEndian
&& hasAuthKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 16, 8);
996 if (swapEndian
&& hasPwdKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 4, 4);
999 PrintAndLog("Special Block: %0d (0x%02X) [ %s]", blockNo
, blockNo
, sprint_hex(blockdata
, 4));
1001 PrintAndLog("Block: %0d (0x%02X) [ %s]", blockNo
, blockNo
, sprint_hex(blockdata
, 4));
1004 UsbCommand c
= {CMD_MIFAREU_WRITEBL
, {blockNo
}};
1005 memcpy(c
.d
.asBytes
,blockdata
,4);
1009 memcpy(c
.d
.asBytes
+4,authKeyPtr
,16);
1011 else if ( hasPwdKey
) {
1013 memcpy(c
.d
.asBytes
+4,authKeyPtr
,4);
1016 clearCommandBuffer();
1019 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1020 uint8_t isOK
= resp
.arg
[0] & 0xff;
1021 PrintAndLog("isOk:%02x", isOK
);
1023 PrintAndLog("Command execute timeout");
1029 // Read Single Block
1031 int CmdHF14AMfURdBl(const char *Cmd
){
1034 bool errors
= false;
1035 bool hasAuthKey
= false;
1036 bool hasPwdKey
= false;
1037 bool swapEndian
= false;
1040 uint8_t data
[16] = {0x00};
1041 uint8_t authenticationkey
[16] = {0x00};
1042 uint8_t *authKeyPtr
= authenticationkey
;
1044 while(param_getchar(Cmd
, cmdp
) != 0x00)
1046 switch(param_getchar(Cmd
, cmdp
))
1050 return usage_hf_mfu_rdbl();
1053 // EV1/NTAG size key
1054 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 8);
1056 memcpy(authenticationkey
, data
, 4);
1062 keylen
= param_gethex(Cmd
, cmdp
+1, data
, 32);
1064 memcpy(authenticationkey
, data
, 16);
1069 PrintAndLog("\nERROR: Key is incorrect length\n");
1074 blockNo
= param_get8(Cmd
, cmdp
+1);
1076 PrintAndLog("Wrong block number");
1087 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
1092 if(errors
) return usage_hf_mfu_rdbl();
1095 if ( blockNo
== -1 ) return usage_hf_mfu_rdbl();
1096 // start with getting tagtype
1097 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
1098 if (tagtype
== UL_ERROR
) return -1;
1100 uint8_t maxblockno
= 0;
1101 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++){
1102 if (tagtype
& UL_TYPES_ARRAY
[idx
])
1103 maxblockno
= UL_MEMORY_ARRAY
[idx
];
1105 if (blockNo
> maxblockno
){
1106 PrintAndLog("block number to large. Max block is %u/0x%02X \n", maxblockno
,maxblockno
);
1107 return usage_hf_mfu_rdbl();
1111 if (swapEndian
&& hasAuthKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 16, 8);
1112 if (swapEndian
&& hasPwdKey
) authKeyPtr
= SwapEndian64(authenticationkey
, 4, 4);
1115 UsbCommand c
= {CMD_MIFAREU_READBL
, {blockNo
}};
1118 memcpy(c
.d
.asBytes
,authKeyPtr
,16);
1120 else if ( hasPwdKey
) {
1122 memcpy(c
.d
.asBytes
,authKeyPtr
,4);
1125 clearCommandBuffer();
1128 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1129 uint8_t isOK
= resp
.arg
[0] & 0xff;
1131 uint8_t *data
= resp
.d
.asBytes
;
1132 PrintAndLog("\nBlock# | Data | Ascii");
1133 PrintAndLog("-----------------------------");
1134 PrintAndLog("%02d/0x%02X | %s| %.4s\n", blockNo
, blockNo
, sprint_hex(data
, 4), data
);
1137 PrintAndLog("Failed reading block: (%02x)", isOK
);
1140 PrintAndLog("Command execute time-out");
1145 int usage_hf_mfu_info(void) {
1146 PrintAndLog("It gathers information about the tag and tries to detect what kind it is.");
1147 PrintAndLog("Sometimes the tags are locked down, and you may need a key to be able to read the information");
1148 PrintAndLog("The following tags can be identified:\n");
1149 PrintAndLog("Ultralight, Ultralight-C, Ultralight EV1, NTAG 203, NTAG 210,");
1150 PrintAndLog("NTAG 212, NTAG 213, NTAG 215, NTAG 216, NTAG I2C 1K & 2K");
1151 PrintAndLog("my-d, my-d NFC, my-d move, my-d move NFC\n");
1152 PrintAndLog("Usage: hf mfu info k <key> l");
1153 PrintAndLog(" Options : ");
1154 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1155 PrintAndLog(" l : (optional) swap entered key's endianness");
1157 PrintAndLog(" sample : hf mfu info");
1158 PrintAndLog(" : hf mfu info k 00112233445566778899AABBCCDDEEFF");
1159 PrintAndLog(" : hf mfu info k AABBCCDDD");
1163 int usage_hf_mfu_dump(void) {
1164 PrintAndLog("Reads all pages from Ultralight, Ultralight-C, Ultralight EV1");
1165 PrintAndLog("NTAG 203, NTAG 210, NTAG 212, NTAG 213, NTAG 215, NTAG 216");
1166 PrintAndLog("and saves binary dump into the file `filename.bin` or `cardUID.bin`");
1167 PrintAndLog("It autodetects card type.\n");
1168 PrintAndLog("Usage: hf mfu dump k <key> l n <filename w/o .bin>");
1169 PrintAndLog(" Options : ");
1170 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1171 PrintAndLog(" l : (optional) swap entered key's endianness");
1172 PrintAndLog(" n <FN > : filename w/o .bin to save the dump as");
1173 PrintAndLog(" p <Pg > : starting Page number to manually set a page to start the dump at");
1174 PrintAndLog(" q <qty> : number of Pages to manually set how many pages to dump");
1177 PrintAndLog(" sample : hf mfu dump");
1178 PrintAndLog(" : hf mfu dump n myfile");
1179 PrintAndLog(" : hf mfu dump k 00112233445566778899AABBCCDDEEFF");
1180 PrintAndLog(" : hf mfu dump k AABBCCDDD\n");
1184 int usage_hf_mfu_rdbl(void) {
1185 PrintAndLog("Read a block and print. It autodetects card type.\n");
1186 PrintAndLog("Usage: hf mfu rdbl b <block number> k <key> l\n");
1187 PrintAndLog(" Options:");
1188 PrintAndLog(" b <no> : block to read");
1189 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1190 PrintAndLog(" l : (optional) swap entered key's endianness");
1192 PrintAndLog(" sample : hf mfu rdbl b 0");
1193 PrintAndLog(" : hf mfu rdbl b 0 k 00112233445566778899AABBCCDDEEFF");
1194 PrintAndLog(" : hf mfu rdbl b 0 k AABBCCDDD\n");
1198 int usage_hf_mfu_wrbl(void) {
1199 PrintAndLog("Write a block. It autodetects card type.\n");
1200 PrintAndLog("Usage: hf mfu wrbl b <block number> d <data> k <key> l\n");
1201 PrintAndLog(" Options:");
1202 PrintAndLog(" b <no> : block to write");
1203 PrintAndLog(" d <data> : block data - (8 hex symbols)");
1204 PrintAndLog(" k <key> : (optional) key for authentication [UL-C 16bytes, EV1/NTAG 4bytes]");
1205 PrintAndLog(" l : (optional) swap entered key's endianness");
1207 PrintAndLog(" sample : hf mfu wrbl b 0 d 01234567");
1208 PrintAndLog(" : hf mfu wrbl b 0 d 01234567 k AABBCCDDD\n");
1213 // Mifare Ultralight / Ultralight-C / Ultralight-EV1
1214 // Read and Dump Card Contents, using auto detection of tag size.
1215 int CmdHF14AMfUDump(const char *Cmd
){
1218 char filename
[FILE_PATH_SIZE
] = {0x00};
1219 char *fnameptr
= filename
;
1220 uint8_t *lockbytes_t
= NULL
;
1221 uint8_t lockbytes
[2] = {0x00};
1222 uint8_t *lockbytes_t2
= NULL
;
1223 uint8_t lockbytes2
[2] = {0x00};
1224 bool bit
[16] = {0x00};
1225 bool bit2
[16] = {0x00};
1226 uint8_t data
[1024] = {0x00};
1227 bool hasAuthKey
= false;
1230 bool tmplockbit
= false;
1231 uint8_t dataLen
= 0;
1233 uint8_t authenticationkey
[16] = {0x00};
1234 uint8_t *authKeyPtr
= authenticationkey
;
1235 size_t fileNlen
= 0;
1236 bool errors
= false;
1237 bool swapEndian
= false;
1238 bool manualPages
= false;
1239 uint8_t startPage
= 0;
1241 unsigned char cleanASCII
[4];
1243 while(param_getchar(Cmd
, cmdp
) != 0x00)
1245 switch(param_getchar(Cmd
, cmdp
))
1249 return usage_hf_mfu_dump();
1252 dataLen
= param_getstr(Cmd
, cmdp
+1, tempStr
);
1253 if (dataLen
== 32 || dataLen
== 8) { //ul-c or ev1/ntag key length
1254 errors
= param_gethex(tempStr
, 0, authenticationkey
, dataLen
);
1257 PrintAndLog("\nERROR: Key is incorrect length\n");
1270 fileNlen
= param_getstr(Cmd
, cmdp
+1, filename
);
1271 if (!fileNlen
) errors
= true;
1272 if (fileNlen
> FILE_PATH_SIZE
-5) fileNlen
= FILE_PATH_SIZE
-5;
1277 startPage
= param_get8(Cmd
, cmdp
+1);
1283 Pages
= param_get8(Cmd
, cmdp
+1);
1288 PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd
, cmdp
));
1296 if(errors
) return usage_hf_mfu_dump();
1298 if (swapEndian
&& hasAuthKey
)
1299 authKeyPtr
= SwapEndian64(authenticationkey
, dataLen
, (dataLen
== 16) ? 8 : 4);
1301 TagTypeUL_t tagtype
= GetHF14AMfU_Type();
1302 if (tagtype
== UL_ERROR
) return -1;
1304 if (!manualPages
) //get number of pages to read
1305 for (uint8_t idx
= 0; idx
< MAX_UL_TYPES
; idx
++)
1306 if (tagtype
& UL_TYPES_ARRAY
[idx
])
1307 Pages
= UL_MEMORY_ARRAY
[idx
]+1; //add one as maxblks starts at 0
1309 ul_print_type(tagtype
, 0);
1310 PrintAndLog("Reading tag memory...");
1311 UsbCommand c
= {CMD_MIFAREU_READCARD
, {startPage
,Pages
}};
1314 c
.arg
[2] = 1; //UL_C auth
1316 c
.arg
[2] = 2; //UL_EV1/NTAG auth
1318 memcpy(c
.d
.asBytes
, authKeyPtr
, dataLen
);
1321 clearCommandBuffer();
1324 if (!WaitForResponseTimeout(CMD_ACK
, &resp
,1500)) {
1325 PrintAndLog("Command execute time-out");
1328 if (resp
.arg
[0] != 1) {
1329 PrintAndLog("Failed reading block: (%02x)", i
);
1333 uint32_t startindex
= resp
.arg
[2];
1334 uint32_t bufferSize
= resp
.arg
[1];
1335 if (bufferSize
> sizeof(data
)) {
1336 PrintAndLog("Data exceeded Buffer size!");
1337 bufferSize
= sizeof(data
);
1339 GetFromBigBuf(data
, bufferSize
, startindex
);
1340 WaitForResponse(CMD_ACK
,NULL
);
1342 Pages
= bufferSize
/4;
1346 lockbytes_t
= data
+ 8;
1347 lockbytes
[0] = lockbytes_t
[2];
1348 lockbytes
[1] = lockbytes_t
[3];
1349 for(j
= 0; j
< 16; j
++){
1350 bit
[j
] = lockbytes
[j
/8] & ( 1 <<(7-j
%8));
1353 // Load bottom lockbytes if available
1354 // TODO -- FIGURE OUT LOCK BYTES FOR TO EV1 and/or NTAG
1355 if ( Pages
== 44 ) {
1356 lockbytes_t2
= data
+ (40*4);
1357 lockbytes2
[0] = lockbytes_t2
[2];
1358 lockbytes2
[1] = lockbytes_t2
[3];
1359 for (j
= 0; j
< 16; j
++) {
1360 bit2
[j
] = lockbytes2
[j
/8] & ( 1 <<(7-j
%8));
1364 // add keys to block dump
1367 authKeyPtr
= SwapEndian64(authenticationkey
, dataLen
, (dataLen
== 16) ? 8 : 4);
1369 authKeyPtr
= authenticationkey
;
1372 if (tagtype
& UL_C
){ //add 4 pages
1373 memcpy(data
+ Pages
*4, authKeyPtr
, dataLen
);
1375 } else { // 2nd page from end
1376 memcpy(data
+ (Pages
*4) - 8, authenticationkey
, dataLen
);
1380 PrintAndLog("\nBlock# | Data |lck| Ascii");
1381 PrintAndLog("---------------------------------");
1382 for (i
= 0; i
< Pages
; ++i
) {
1384 PrintAndLog("%3d/0x%02X | %s| | ", i
+startPage
, i
+startPage
, sprint_hex(data
+ i
* 4, 4));
1388 case 3: tmplockbit
= bit
[4]; break;
1389 case 4: tmplockbit
= bit
[3]; break;
1390 case 5: tmplockbit
= bit
[2]; break;
1391 case 6: tmplockbit
= bit
[1]; break;
1392 case 7: tmplockbit
= bit
[0]; break;
1393 case 8: tmplockbit
= bit
[15]; break;
1394 case 9: tmplockbit
= bit
[14]; break;
1395 case 10: tmplockbit
= bit
[13]; break;
1396 case 11: tmplockbit
= bit
[12]; break;
1397 case 12: tmplockbit
= bit
[11]; break;
1398 case 13: tmplockbit
= bit
[10]; break;
1399 case 14: tmplockbit
= bit
[9]; break;
1400 case 15: tmplockbit
= bit
[8]; break;
1404 case 19: tmplockbit
= bit2
[6]; break;
1408 case 23: tmplockbit
= bit2
[5]; break;
1412 case 27: tmplockbit
= bit2
[4]; break;
1416 case 31: tmplockbit
= bit2
[2]; break;
1420 case 35: tmplockbit
= bit2
[1]; break;
1424 case 39: tmplockbit
= bit2
[0]; break;
1425 case 40: tmplockbit
= bit2
[12]; break;
1426 case 41: tmplockbit
= bit2
[11]; break;
1427 case 42: tmplockbit
= bit2
[10]; break; //auth0
1428 case 43: tmplockbit
= bit2
[9]; break; //auth1
1432 // convert unprintable characters and line breaks to dots
1433 memcpy(cleanASCII
, data
+i
*4, 4);
1434 clean_ascii(cleanASCII
, 4);
1436 PrintAndLog("%3d/0x%02X | %s| %d | %.4s", i
+startPage
, i
+startPage
, sprint_hex(data
+ i
* 4, 4), tmplockbit
, cleanASCII
);
1438 PrintAndLog("---------------------------------");
1440 // user supplied filename?
1442 // UID = data 0-1-2 4-5-6-7 (skips a beat)
1443 sprintf(fnameptr
,"%02X%02X%02X%02X%02X%02X%02X.bin",
1444 data
[0],data
[1], data
[2], data
[4],data
[5],data
[6], data
[7]);
1446 sprintf(fnameptr
+ fileNlen
,".bin");
1449 if ((fout
= fopen(filename
,"wb")) == NULL
) {
1450 PrintAndLog("Could not create file name %s", filename
);
1453 fwrite( data
, 1, Pages
*4, fout
);
1456 PrintAndLog("Dumped %d pages, wrote %d bytes to %s", Pages
, Pages
*4, filename
);
1460 //-------------------------------------------------------------------------------
1461 // Ultralight C Methods
1462 //-------------------------------------------------------------------------------
1465 // Ultralight C Authentication Demo {currently uses hard-coded key}
1467 int CmdHF14AMfucAuth(const char *Cmd
){
1470 bool errors
= false;
1472 char cmdp
= param_getchar(Cmd
, 0);
1474 //Change key to user defined one
1475 if (cmdp
== 'k' || cmdp
== 'K'){
1476 keyNo
= param_get8(Cmd
, 1);
1477 if(keyNo
> KEYS_3DES_COUNT
-1)
1481 if (cmdp
== 'h' || cmdp
== 'H')
1485 PrintAndLog("Usage: hf mfu cauth k <key number>");
1486 PrintAndLog(" 0 (default): 3DES standard key");
1487 PrintAndLog(" 1 : all 0x00 key");
1488 PrintAndLog(" 2 : 0x00-0x0F key");
1489 PrintAndLog(" 3 : nfc key");
1490 PrintAndLog(" 4 : all 0x01 key");
1491 PrintAndLog(" 5 : all 0xff key");
1492 PrintAndLog(" 6 : 0x00-0xFF key");
1493 PrintAndLog("\n sample : hf mfu cauth k");
1494 PrintAndLog(" : hf mfu cauth k 3");
1498 uint8_t *key
= default_3des_keys
[keyNo
];
1499 if (ulc_authentication(key
, true))
1500 PrintAndLog("Authentication successful. 3des key: %s",sprint_hex(key
, 16));
1502 PrintAndLog("Authentication failed");
1508 A test function to validate that the polarssl-function works the same
1509 was as the openssl-implementation.
1510 Commented out, since it requires openssl
1512 int CmdTestDES(const char * cmd)
1514 uint8_t key[16] = {0x00};
1516 memcpy(key,key3_3des_data,16);
1517 DES_cblock RndA, RndB;
1519 PrintAndLog("----------OpenSSL DES implementation----------");
1521 uint8_t e_RndB[8] = {0x00};
1522 unsigned char RndARndB[16] = {0x00};
1524 DES_cblock iv = { 0 };
1525 DES_key_schedule ks1,ks2;
1526 DES_cblock key1,key2;
1528 memcpy(key,key3_3des_data,16);
1530 memcpy(key2,key+8,8);
1533 DES_set_key((DES_cblock *)key1,&ks1);
1534 DES_set_key((DES_cblock *)key2,&ks2);
1536 DES_random_key(&RndA);
1537 PrintAndLog(" RndA:%s",sprint_hex(RndA, 8));
1538 PrintAndLog(" e_RndB:%s",sprint_hex(e_RndB, 8));
1539 //void DES_ede2_cbc_encrypt(const unsigned char *input,
1540 // unsigned char *output, long length, DES_key_schedule *ks1,
1541 // DES_key_schedule *ks2, DES_cblock *ivec, int enc);
1542 DES_ede2_cbc_encrypt(e_RndB,RndB,sizeof(e_RndB),&ks1,&ks2,&iv,0);
1544 PrintAndLog(" RndB:%s",sprint_hex(RndB, 8));
1546 memcpy(RndARndB,RndA,8);
1547 memcpy(RndARndB+8,RndB,8);
1548 PrintAndLog(" RA+B:%s",sprint_hex(RndARndB, 16));
1549 DES_ede2_cbc_encrypt(RndARndB,RndARndB,sizeof(RndARndB),&ks1,&ks2,&e_RndB,1);
1550 PrintAndLog("enc(RA+B):%s",sprint_hex(RndARndB, 16));
1553 PrintAndLog("----------PolarSSL implementation----------");
1555 uint8_t random_a[8] = { 0 };
1556 uint8_t enc_random_a[8] = { 0 };
1557 uint8_t random_b[8] = { 0 };
1558 uint8_t enc_random_b[8] = { 0 };
1559 uint8_t random_a_and_b[16] = { 0 };
1560 des3_context ctx = { 0 };
1562 memcpy(random_a, RndA,8);
1564 uint8_t output[8] = { 0 };
1565 uint8_t iv[8] = { 0 };
1567 PrintAndLog(" RndA :%s",sprint_hex(random_a, 8));
1568 PrintAndLog(" e_RndB:%s",sprint_hex(enc_random_b, 8));
1570 des3_set2key_dec(&ctx, key);
1572 des3_crypt_cbc(&ctx // des3_context *ctx
1573 , DES_DECRYPT // int mode
1574 , sizeof(random_b) // size_t length
1575 , iv // unsigned char iv[8]
1576 , enc_random_b // const unsigned char *input
1577 , random_b // unsigned char *output
1580 PrintAndLog(" RndB:%s",sprint_hex(random_b, 8));
1583 memcpy(random_a_and_b ,random_a,8);
1584 memcpy(random_a_and_b+8,random_b,8);
1586 PrintAndLog(" RA+B:%s",sprint_hex(random_a_and_b, 16));
1588 des3_set2key_enc(&ctx, key);
1590 des3_crypt_cbc(&ctx // des3_context *ctx
1591 , DES_ENCRYPT // int mode
1592 , sizeof(random_a_and_b) // size_t length
1593 , enc_random_b // unsigned char iv[8]
1594 , random_a_and_b // const unsigned char *input
1595 , random_a_and_b // unsigned char *output
1598 PrintAndLog("enc(RA+B):%s",sprint_hex(random_a_and_b, 16));
1605 // Mifare Ultralight C - Set password
1607 int CmdHF14AMfucSetPwd(const char *Cmd
){
1609 uint8_t pwd
[16] = {0x00};
1611 char cmdp
= param_getchar(Cmd
, 0);
1613 if (strlen(Cmd
) == 0 || cmdp
== 'h' || cmdp
== 'H') {
1614 PrintAndLog("Usage: hf mfu setpwd <password (32 hex symbols)>");
1615 PrintAndLog(" [password] - (32 hex symbols)");
1617 PrintAndLog("sample: hf mfu setpwd 000102030405060708090a0b0c0d0e0f");
1622 if (param_gethex(Cmd
, 0, pwd
, 32)) {
1623 PrintAndLog("Password must include 32 HEX symbols");
1627 UsbCommand c
= {CMD_MIFAREUC_SETPWD
};
1628 memcpy( c
.d
.asBytes
, pwd
, 16);
1629 clearCommandBuffer();
1634 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1500) ) {
1635 if ( (resp
.arg
[0] & 0xff) == 1)
1636 PrintAndLog("Ultralight-C new password: %s", sprint_hex(pwd
,16));
1638 PrintAndLog("Failed writing at block %d", resp
.arg
[1] & 0xff);
1643 PrintAndLog("command execution time out");
1651 // Magic UL / UL-C tags - Set UID
1653 int CmdHF14AMfucSetUid(const char *Cmd
){
1657 uint8_t uid
[7] = {0x00};
1658 char cmdp
= param_getchar(Cmd
, 0);
1660 if (strlen(Cmd
) == 0 || cmdp
== 'h' || cmdp
== 'H') {
1661 PrintAndLog("Usage: hf mfu setuid <uid (14 hex symbols)>");
1662 PrintAndLog(" [uid] - (14 hex symbols)");
1663 PrintAndLog("\nThis only works for Magic Ultralight tags.");
1665 PrintAndLog("sample: hf mfu setuid 11223344556677");
1670 if (param_gethex(Cmd
, 0, uid
, 14)) {
1671 PrintAndLog("UID must include 14 HEX symbols");
1676 c
.cmd
= CMD_MIFAREU_READBL
;
1678 clearCommandBuffer();
1680 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1681 PrintAndLog("Command execute timeout");
1686 uint8_t oldblock2
[4] = {0x00};
1687 memcpy(resp
.d
.asBytes
, oldblock2
, 4);
1690 c
.cmd
= CMD_MIFAREU_WRITEBL
;
1692 c
.d
.asBytes
[0] = uid
[0];
1693 c
.d
.asBytes
[1] = uid
[1];
1694 c
.d
.asBytes
[2] = uid
[2];
1695 c
.d
.asBytes
[3] = 0x88 ^ uid
[0] ^ uid
[1] ^ uid
[2];
1696 clearCommandBuffer();
1698 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500)) {
1699 PrintAndLog("Command execute timeout");
1705 c
.d
.asBytes
[0] = uid
[3];
1706 c
.d
.asBytes
[1] = uid
[4];
1707 c
.d
.asBytes
[2] = uid
[5];
1708 c
.d
.asBytes
[3] = uid
[6];
1709 clearCommandBuffer();
1711 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500) ) {
1712 PrintAndLog("Command execute timeout");
1718 c
.d
.asBytes
[0] = uid
[3] ^ uid
[4] ^ uid
[5] ^ uid
[6];
1719 c
.d
.asBytes
[1] = oldblock2
[1];
1720 c
.d
.asBytes
[2] = oldblock2
[2];
1721 c
.d
.asBytes
[3] = oldblock2
[3];
1722 clearCommandBuffer();
1724 if (!WaitForResponseTimeout(CMD_ACK
,&resp
,1500) ) {
1725 PrintAndLog("Command execute timeout");
1732 int CmdHF14AMfuGenDiverseKeys(const char *Cmd
){
1734 uint8_t iv
[8] = { 0x00 };
1735 uint8_t block
= 0x07;
1738 //04 57 b6 e2 05 3f 80 UID
1740 uint8_t uid
[] = { 0xF4,0xEA, 0x54, 0x8E };
1741 uint8_t mifarekeyA
[] = { 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5 };
1742 uint8_t mifarekeyB
[] = { 0xB0,0xB1,0xB2,0xB3,0xB4,0xB5 };
1743 uint8_t dkeyA
[8] = { 0x00 };
1744 uint8_t dkeyB
[8] = { 0x00 };
1746 uint8_t masterkey
[] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xaa,0xbb,0xcc,0xdd,0xee,0xff };
1748 uint8_t mix
[8] = { 0x00 };
1749 uint8_t divkey
[8] = { 0x00 };
1751 memcpy(mix
, mifarekeyA
, 4);
1753 mix
[4] = mifarekeyA
[4] ^ uid
[0];
1754 mix
[5] = mifarekeyA
[5] ^ uid
[1];
1755 mix
[6] = block
^ uid
[2];
1758 des3_context ctx
= { 0x00 };
1759 des3_set2key_enc(&ctx
, masterkey
);
1761 des3_crypt_cbc(&ctx
// des3_context
1762 , DES_ENCRYPT
// int mode
1763 , sizeof(mix
) // length
1769 PrintAndLog("3DES version");
1770 PrintAndLog("Masterkey :\t %s", sprint_hex(masterkey
,sizeof(masterkey
)));
1771 PrintAndLog("UID :\t %s", sprint_hex(uid
, sizeof(uid
)));
1772 PrintAndLog("Sector :\t %0d", block
);
1773 PrintAndLog("Mifare key :\t %s", sprint_hex(mifarekeyA
, sizeof(mifarekeyA
)));
1774 PrintAndLog("Message :\t %s", sprint_hex(mix
, sizeof(mix
)));
1775 PrintAndLog("Diversified key: %s", sprint_hex(divkey
+1, 6));
1777 PrintAndLog("\n DES version");
1779 for (int i
=0; i
< sizeof(mifarekeyA
); ++i
){
1780 dkeyA
[i
] = (mifarekeyA
[i
] << 1) & 0xff;
1781 dkeyA
[6] |= ((mifarekeyA
[i
] >> 7) & 1) << (i
+1);
1784 for (int i
=0; i
< sizeof(mifarekeyB
); ++i
){
1785 dkeyB
[1] |= ((mifarekeyB
[i
] >> 7) & 1) << (i
+1);
1786 dkeyB
[2+i
] = (mifarekeyB
[i
] << 1) & 0xff;
1789 uint8_t zeros
[8] = {0x00};
1790 uint8_t newpwd
[8] = {0x00};
1791 uint8_t dmkey
[24] = {0x00};
1792 memcpy(dmkey
, dkeyA
, 8);
1793 memcpy(dmkey
+8, dkeyB
, 8);
1794 memcpy(dmkey
+16, dkeyA
, 8);
1795 memset(iv
, 0x00, 8);
1797 des3_set3key_enc(&ctx
, dmkey
);
1799 des3_crypt_cbc(&ctx
// des3_context
1800 , DES_ENCRYPT
// int mode
1801 , sizeof(newpwd
) // length
1807 PrintAndLog("Mifare dkeyA :\t %s", sprint_hex(dkeyA
, sizeof(dkeyA
)));
1808 PrintAndLog("Mifare dkeyB :\t %s", sprint_hex(dkeyB
, sizeof(dkeyB
)));
1809 PrintAndLog("Mifare ABA :\t %s", sprint_hex(dmkey
, sizeof(dmkey
)));
1810 PrintAndLog("Mifare Pwd :\t %s", sprint_hex(newpwd
, sizeof(newpwd
)));
1815 // static uint8_t * diversify_key(uint8_t * key){
1817 // for(int i=0; i<16; i++){
1818 // if(i<=6) key[i]^=cuid[i];
1819 // if(i>6) key[i]^=cuid[i%7];
1824 // static void GenerateUIDe( uint8_t *uid, uint8_t len){
1825 // for (int i=0; i<len; ++i){
1831 //------------------------------------
1833 //------------------------------------
1834 static command_t CommandTable
[] =
1836 {"help", CmdHelp
, 1, "This help"},
1837 {"dbg", CmdHF14AMfDbg
, 0, "Set default debug mode"},
1838 {"info", CmdHF14AMfUInfo
, 0, "Tag information"},
1839 {"dump", CmdHF14AMfUDump
, 0, "Dump Ultralight / Ultralight-C / NTAG tag to binary file"},
1840 {"rdbl", CmdHF14AMfURdBl
, 0, "Read block"},
1841 {"wrbl", CmdHF14AMfUWrBl
, 0, "Write block"},
1842 {"cauth", CmdHF14AMfucAuth
, 0, "Authentication - Ultralight C"},
1843 {"setpwd", CmdHF14AMfucSetPwd
, 1, "Set 3des password - Ultralight-C"},
1844 {"setuid", CmdHF14AMfucSetUid
, 1, "Set UID - MAGIC tags only"},
1845 {"gen", CmdHF14AMfuGenDiverseKeys
, 1, "Generate 3des mifare diversified keys"},
1846 {NULL
, NULL
, 0, NULL
}
1849 int CmdHFMFUltra(const char *Cmd
){
1850 WaitForResponseTimeout(CMD_ACK
,NULL
,100);
1851 CmdsParse(CommandTable
, Cmd
);
1855 int CmdHelp(const char *Cmd
){
1856 CmdsHelp(CommandTable
);