cvs.zerfleddert.de Git - proxmark3-svn/blob - README.txt

   1 INTRO:
   2
   3 This file contains enough software, logic (for the FPGA), and design
   4 documentation for the hardware that you could, at least in theory,
   5 do something useful with a proxmark3. It has commands to:
   6
   7     * read any kind of 125 kHz unidirectional tag
   8     * simulate any kind of 125 kHz unidirectional tag
   9
  10 (This is enough to perform all of the silly cloning attacks, like the
  11 ones that I did at the Capitol in Sacramento, or anything involving
  12 a Verichip. From a technical standpoint, these are not that exciting,
  13 although the `software radio' architecture of the proxmark3 makes it
  14 easy and fun to support new formats.)
  15
  16 As a bonus, I include some code to use the 13.56 MHz hardware, so you can:
  17
  18     * do anything that a (medium-range) ISO 15693 reader could
  19     * read an ISO 14443 tag, if you know the higher-layer protocol
  20     * pretend to be an ISO 14443 tag, if you know the higher-layer protocol
  21     * snoop on an ISO 14443 transaction
  22
  23 I am not actively developing any of this. I have other projects that
  24 seem to be more useful.
  25
  26 USING THE PACKAGE:
  27
  28 The software tools required to build include:
  29
  30     * cygwin or other unix-like tools for Windows
  31     * devkitPro (http://wiki.devkitpro.org/index.php/Getting_Started/devkitARM)
  32     * Xilinx's WebPack tools
  33     * Modelsim (for test only)
  34     * perl
  35
  36 When installing devkitPro, you only need to install the compiler itself. Additional
  37 support libraries are  not required.
  38
  39 Documentation is minimal, but see the doc/ directory for what exists. A
  40 previous familiarity with the ARM, with digital signal processing,
  41 and with embedded programming in general is assumed.
  42
  43 The device is used through a specialized command line interface; for
  44 example, to clone a Verichip, you might type:
  45
  46     loread                          ; this reads the tag, and stores the
  47                                     ; raw samples in memory on the ARM
  48
  49     losamples                       ; then we download the samples to
  50                                     ; the PC
  51
  52     vchdemod clone                  ; demodulate the ID, and then put it
  53                                     ; back in a format that we can replay
  54
  55     losim                           ; and then replay it
  56
  57 To read an ISO 15693 tag, you might type:
  58
  59     hiread                          ; read the tag; this involves sending a
  60                                     ; particular command, and then getting
  61                                     ; the response (which is stored as raw
  62                                     ; samples in memory on the ARM)
  63
  64     hisamples                       ; then download those samples to the PC
  65
  66     hi15demod                       ; and demod them to bits (and check the
  67                                     ; CRC etc. at the same time)
  68
  69 Notice that in both cases the signal processing mostly happened on the PC
  70 side; that is of course not practical for a real reader, but it is easier
  71 to initially write your code and debug on the PC side than on the ARM. As
  72 long as you use integer math (and I do), it's trivial to port it over
  73 when you're done.
  74
  75 The USB driver and bootloader are documented (and available separately
  76 for download, if you wish to use them in another project) at
  77
  78     http://cq.cx/trivia.pl
  79
  80
  81 OBTAINING HARDWARE:
  82
  83 Most of the ultra-low-volume contract assemblers that have sprung up
  84 (Screaming Circuits, the various cheap Asian suppliers, etc.) could put
  85 something like this together with a reasonable yield. A run of around
  86 a dozen units is probably cost-effective. The BOM includes (possibly-
  87 outdated) component pricing, and everything is available from Digikey
  88 and the usual distributors.
  89
  90 If you've never assembled a modern circuit board by hand, then this is
  91 not a good place to start. Some of the components (e.g. the crystals)
  92 must not be assembled with a soldering iron, and require hot air.
  93
  94 The schematics are included; the component values given are not
  95 necessarily correct for all situations, but it should be possible to do
  96 nearly anything you would want with appropriate population options.
  97
  98 The printed circuit board artwork is also available, as Gerbers and an
  99 Excellon drill file.
 100
 101
 102 FUTURE PLANS, ENHANCEMENTS THAT YOU COULD MAKE:
 103
 104 At some point I should write software involving a proper real-time
 105 operating system for the ARM. I would then provide interrupt-driven
 106 drivers for many of the peripherals that are polled now (the USB,
 107 the data stream from the FPGA), which would make it easier to develop
 108 complex applications.
 109
 110 It would not be all that hard to implement the ISO 15693 reader properly
 111 (with anticollision, all the commands supported, and so on)--the signal
 112 processing is already written, so it is all straightforward applications
 113 work.
 114
 115 I have basic support for ISO 14443 as well: a sniffer, a simulated
 116 tag, and a reader. It won't do anything useful unless you fill in the
 117 high-layer protocol.
 118
 119 Nicer (i.e., closer-to-optimal) implementations of all kinds of signal
 120 processing would be useful as well.
 121
 122 A practical implementation of the learning-the-tag's-ID-from-what-the-
 123 reader-broadcasts-during-anticollision attacks would be relatively
 124 straightforward. This would involve some signal processing on the FPGA,
 125 but not much else after that.
 126
 127 It would be neat to write a driver that could stream samples from the A/Ds
 128 over USB to the PC, using the full available bandwidth of USB. I am not
 129 yet sure what that would be good for, but surely something. This would
 130 require a kernel-mode driver under Windows, though, which is more work.
 131
 132
 133 LICENSING:
 134
 135 This program is free software; you can redistribute it and/or modify
 136 it under the terms of the GNU General Public License as published by
 137 the Free Software Foundation; either version 2 of the License, or
 138 (at your option) any later version.
 139
 140 This program is distributed in the hope that it will be useful,
 141 but WITHOUT ANY WARRANTY; without even the implied warranty of
 142 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 143 GNU General Public License for more details.
 144
 145 You should have received a copy of the GNU General Public License
 146 along with this program; if not, write to the Free Software
 147 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 148
 149
 150 Jonathan Westhues
 151 user jwesthues, at host cq.cx
 152
 153 May 2007, Cambridge MA
 154