]> cvs.zerfleddert.de Git - proxmark3-svn/blob - include/usb_cmd.h
ADD: 'LF NORALSY' clone/sim/read commands. Partly done. some crc works, but...
[proxmark3-svn] / include / usb_cmd.h
1 //-----------------------------------------------------------------------------
2 // Jonathan Westhues, Mar 2006
3 // Edits by Gerhard de Koning Gans, Sep 2007
4 //
5 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
6 // at your option, any later version. See the LICENSE.txt file for the text of
7 // the license.
8 //-----------------------------------------------------------------------------
9 // Definitions for all the types of commands that may be sent over USB; our
10 // own protocol.
11 //-----------------------------------------------------------------------------
12
13 #ifndef __USB_CMD_H
14 #define __USB_CMD_H
15 #ifdef _MSC_VER
16 typedef DWORD uint32_t;
17 typedef BYTE uint8_t;
18 #define PACKED
19 // stuff
20 #else
21 #include <stdint.h>
22 #include <stdbool.h>
23 #define PACKED __attribute__((packed))
24 #endif
25
26 #define USB_CMD_DATA_SIZE 512
27
28 typedef struct {
29 uint64_t cmd;
30 uint64_t arg[3];
31 union {
32 uint8_t asBytes[USB_CMD_DATA_SIZE];
33 uint32_t asDwords[USB_CMD_DATA_SIZE/4];
34 } d;
35 } PACKED UsbCommand;
36 // A struct used to send sample-configs over USB
37 typedef struct{
38 uint8_t decimation;
39 uint8_t bits_per_sample;
40 bool averaging;
41 int divisor;
42 int trigger_threshold;
43 } sample_config;
44
45 // For the bootloader
46 #define CMD_DEVICE_INFO 0x0000
47 #define CMD_SETUP_WRITE 0x0001
48 #define CMD_FINISH_WRITE 0x0003
49 #define CMD_HARDWARE_RESET 0x0004
50 #define CMD_START_FLASH 0x0005
51 #define CMD_NACK 0x00fe
52 #define CMD_ACK 0x00ff
53
54 // For general mucking around
55 #define CMD_DEBUG_PRINT_STRING 0x0100
56 #define CMD_DEBUG_PRINT_INTEGERS 0x0101
57 #define CMD_DEBUG_PRINT_BYTES 0x0102
58 #define CMD_LCD_RESET 0x0103
59 #define CMD_LCD 0x0104
60 #define CMD_BUFF_CLEAR 0x0105
61 #define CMD_READ_MEM 0x0106
62 #define CMD_VERSION 0x0107
63 #define CMD_STATUS 0x0108
64 #define CMD_PING 0x0109
65
66 #define CMD_DOWNLOAD_EML_BIGBUF 0x0110
67 #define CMD_DOWNLOADED_EML_BIGBUF 0x0111
68
69 // For low-frequency tags
70 #define CMD_READ_TI_TYPE 0x0202
71 #define CMD_WRITE_TI_TYPE 0x0203
72 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
73 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
74 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
75 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
76 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
77 #define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
78 #define CMD_SIMULATE_TAG_125K 0x020A
79 #define CMD_HID_DEMOD_FSK 0x020B
80 #define CMD_HID_SIM_TAG 0x020C
81 #define CMD_SET_LF_DIVISOR 0x020D
82 #define CMD_LF_SIMULATE_BIDIR 0x020E
83 #define CMD_SET_ADC_MUX 0x020F
84 #define CMD_HID_CLONE_TAG 0x0210
85 #define CMD_EM410X_WRITE_TAG 0x0211
86 #define CMD_INDALA_CLONE_TAG 0x0212
87 // for 224 bits UID
88 #define CMD_INDALA_CLONE_TAG_L 0x0213
89 #define CMD_T55XX_READ_BLOCK 0x0214
90 #define CMD_T55XX_WRITE_BLOCK 0x0215
91 #define CMD_T55XX_RESET_READ 0x0216
92 #define CMD_PCF7931_READ 0x0217
93 #define CMD_PCF7931_WRITE 0x0223
94 #define CMD_EM4X_READ_WORD 0x0218
95 #define CMD_EM4X_WRITE_WORD 0x0219
96 #define CMD_IO_DEMOD_FSK 0x021A
97 #define CMD_IO_CLONE_TAG 0x021B
98 #define CMD_EM410X_DEMOD 0x021c
99 // Sampling configuration for LF reader/snooper
100 #define CMD_SET_LF_SAMPLING_CONFIG 0x021d
101 #define CMD_FSK_SIM_TAG 0x021E
102 #define CMD_ASK_SIM_TAG 0x021F
103 #define CMD_PSK_SIM_TAG 0x0220
104 #define CMD_AWID_DEMOD_FSK 0x0221
105 #define CMD_VIKING_CLONE_TAG 0x0222
106 #define CMD_T55XX_WAKEUP 0x0224
107
108 /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
109
110 // For the 13.56 MHz tags
111 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
112 #define CMD_READ_SRI_TAG 0x0303
113 #define CMD_ISO_14443B_COMMAND 0x0305
114 #define CMD_READER_ISO_15693 0x0310
115 #define CMD_SIMTAG_ISO_15693 0x0311
116 #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
117 #define CMD_ISO_15693_COMMAND 0x0313
118 #define CMD_ISO_15693_COMMAND_DONE 0x0314
119 #define CMD_ISO_15693_FIND_AFI 0x0315
120 #define CMD_ISO_15693_DEBUG 0x0316
121 #define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
122
123 // For Hitag2 transponders
124 #define CMD_SNOOP_HITAG 0x0370
125 #define CMD_SIMULATE_HITAG 0x0371
126 #define CMD_READER_HITAG 0x0372
127
128 // For HitagS
129 #define CMD_TEST_HITAGS_TRACES 0x0367
130 #define CMD_SIMULATE_HITAG_S 0x0368
131 #define CMD_READ_HITAG_S 0x0373
132 #define CMD_WR_HITAG_S 0x0375
133 #define CMD_EMU_HITAG_S 0x0376
134
135
136 #define CMD_SIMULATE_TAG_ISO_14443B 0x0381
137 #define CMD_SNOOP_ISO_14443B 0x0382
138 #define CMD_SNOOP_ISO_14443a 0x0383
139 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384
140 #define CMD_READER_ISO_14443a 0x0385
141 #define CMD_RAW_WRITER_LEGIC_RF 0x0386
142 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
143 #define CMD_READER_LEGIC_RF 0x0388
144 #define CMD_WRITER_LEGIC_RF 0x0389
145
146 #define CMD_EPA_PACE_COLLECT_NONCE 0x038A
147 #define CMD_EPA_PACE_REPLAY 0x038B
148
149 #define CMD_LEGIC_INFO 0x03BC
150 #define CMD_LEGIC_ESET 0x03BD
151 #define CMD_LEGIC_EGET 0x03BE
152
153 #define CMD_ICLASS_READCHECK 0x038F
154 #define CMD_ICLASS_CLONE 0x0390
155 #define CMD_ICLASS_DUMP 0x0391
156 #define CMD_SNOOP_ICLASS 0x0392
157 #define CMD_SIMULATE_TAG_ICLASS 0x0393
158 #define CMD_READER_ICLASS 0x0394
159 #define CMD_READER_ICLASS_REPLAY 0x0395
160 #define CMD_ICLASS_READBLOCK 0x0396
161 #define CMD_ICLASS_WRITEBLOCK 0x0397
162 #define CMD_ICLASS_EML_MEMSET 0x0398
163 #define CMD_ICLASS_AUTHENTICATION 0x0399
164
165 // For measurements of the antenna tuning
166 #define CMD_MEASURE_ANTENNA_TUNING 0x0400
167 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
168 #define CMD_MEASURED_ANTENNA_TUNING 0x0410
169 #define CMD_LISTEN_READER_FIELD 0x0420
170
171 // For direct FPGA control
172 #define CMD_FPGA_MAJOR_MODE_OFF 0x0500
173
174 // For mifare commands
175 #define CMD_MIFARE_SET_DBGMODE 0x0600
176 #define CMD_MIFARE_EML_MEMCLR 0x0601
177 #define CMD_MIFARE_EML_MEMSET 0x0602
178 #define CMD_MIFARE_EML_MEMGET 0x0603
179 #define CMD_MIFARE_EML_CARDLOAD 0x0604
180
181 // magic chinese card commands
182 #define CMD_MIFARE_CSETBLOCK 0x0605
183 #define CMD_MIFARE_CGETBLOCK 0x0606
184 #define CMD_MIFARE_CIDENT 0x0607
185
186 #define CMD_SIMULATE_MIFARE_CARD 0x0610
187
188 #define CMD_READER_MIFARE 0x0611
189 #define CMD_MIFARE_NESTED 0x0612
190 #define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
191
192 #define CMD_MIFARE_READBL 0x0620
193 #define CMD_MIFAREU_READBL 0x0720
194 #define CMD_MIFARE_READSC 0x0621
195 #define CMD_MIFAREU_READCARD 0x0721
196 #define CMD_MIFARE_WRITEBL 0x0622
197 #define CMD_MIFAREU_WRITEBL 0x0722
198 #define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
199
200 #define CMD_MIFARE_CHKKEYS 0x0623
201
202 #define CMD_MIFARE_SNIFFER 0x0630
203 //ultralightC
204 #define CMD_MIFAREUC_AUTH 0x0724
205 //0x0725 and 0x0726 no longer used
206 #define CMD_MIFAREUC_SETPWD 0x0727
207
208
209 // mifare desfire
210 #define CMD_MIFARE_DESFIRE_READBL 0x0728
211 #define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
212 #define CMD_MIFARE_DESFIRE_AUTH1 0x072a
213 #define CMD_MIFARE_DESFIRE_AUTH2 0x072b
214 #define CMD_MIFARE_DES_READER 0x072c
215 #define CMD_MIFARE_DESFIRE_INFO 0x072d
216 #define CMD_MIFARE_DESFIRE 0x072e
217
218 #define CMD_MIFARE_COLLECT_NONCES 0x072f
219
220 #define CMD_HF_SNIFFER 0x0800
221
222
223 // For EMV Commands
224 #define CMD_EMV_READ_RECORD 0x0700
225 #define CMD_EMV_TRANSACTION 0x0701
226 #define CMD_EMV_CLONE 0x0702
227 #define CMD_EMV_SIM 0x0703
228 #define CMD_EMV_TEST 0x0704
229 #define CMD_EMV_FUZZ_RATS 0x0705
230 #define CMD_EMV_GET_RANDOM_NUM 0x0706
231 #define CMD_EMV_LOAD_VALUE 0x0707
232 #define CMD_EMV_DUMP_CARD 0x0708
233
234 #define CMD_UNKNOWN 0xFFFF
235
236
237 //Mifare simulation flags
238 #define FLAG_INTERACTIVE 0x01
239 #define FLAG_4B_UID_IN_DATA 0x02
240 #define FLAG_7B_UID_IN_DATA 0x04
241 #define FLAG_10B_UID_IN_DATA 0x08
242 #define FLAG_UID_IN_EMUL 0x10
243 #define FLAG_NR_AR_ATTACK 0x20
244
245
246 //Iclass reader flags
247 #define FLAG_ICLASS_READER_ONLY_ONCE 0x01
248 #define FLAG_ICLASS_READER_CC 0x02
249 #define FLAG_ICLASS_READER_CSN 0x04
250 #define FLAG_ICLASS_READER_CONF 0x08
251 #define FLAG_ICLASS_READER_AA 0x10
252 #define FLAG_ICLASS_READER_ONE_TRY 0x20
253 #define FLAG_ICLASS_READER_CEDITKEY 0x40
254
255
256
257 // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
258 /* Whether a bootloader that understands the common_area is present */
259 #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
260
261 /* Whether a osimage that understands the common_area is present */
262 #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
263
264 /* Set if the bootloader is currently executing */
265 #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
266
267 /* Set if the OS is currently executing */
268 #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
269
270 /* Set if this device understands the extend start flash command */
271 #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
272
273 /* CMD_START_FLASH may have three arguments: start of area to flash,
274 end of area to flash, optional magic.
275 The bootrom will not allow to overwrite itself unless this magic
276 is given as third parameter */
277
278 #define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
279
280 #endif
Impressum, Datenschutz