1 //-----------------------------------------------------------------------------
2 // Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
3 // Modified 2010-2012 by <adrian -at- atrox.at>
4 // Modified 2012 by <vsza at vsza.hu>
6 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
7 // at your option, any later version. See the LICENSE.txt file for the text of
9 //-----------------------------------------------------------------------------
10 // High frequency ISO15693 commands
11 //-----------------------------------------------------------------------------
12 // There are three basic operation modes, depending on which device (proxmark/pc)
13 // the signal processing, (de)modulation, transmission protocol and logic is done.
15 // All steps are done on the proxmark, the output of the commands is returned via
16 // USB-debug-print commands.
18 // The protocol is done on the PC, passing only Iso15693 data frames via USB. This
19 // allows direct communication with a tag on command level
21 // The proxmark just samples the antenna and passes this "analog" data via USB to
22 // the client. Signal Processing & decoding is done on the pc. This is the slowest
23 // variant, but offers the possibility to analyze the waveforms directly.
36 #include "cmdparser.h"
37 #include "iso15693tools.h"
38 #include "protocols.h"
42 #define Crc(data,datalen) Iso15693Crc(data,datalen)
43 #define AddCrc(data,datalen) Iso15693AddCrc(data,datalen)
44 #define sprintUID(target,uid) Iso15693sprintUID(target,uid)
47 // 1) Unmodulated time of 56.64us
48 // 2) 24 pulses of 423.75khz
49 // 3) logic '1' (unmodulated for 18.88us followed by 8 pulses of 423.75khz)
51 static const int Iso15693FrameSOF
[] = {
52 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
53 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
54 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
55 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
61 static const int Iso15693Logic0
[] = {
67 static const int Iso15693Logic1
[] = {
75 // 1) logic '0' (8 pulses of 423.75khz followed by unmodulated for 18.88us)
76 // 2) 24 pulses of 423.75khz
77 // 3) Unmodulated time of 56.64us
79 static const int Iso15693FrameEOF
[] = {
84 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
85 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
86 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
87 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
91 // fast method to just read the UID of a tag (collission detection not supported)
92 // *buf should be large enough to fit the 64bit uid
93 // returns 1 if suceeded
94 int getUID(uint8_t *buf
)
98 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
99 uint8_t *req
=c
.d
.asBytes
;
102 for (int retry
=0;retry
<3; retry
++) { // don't give up the at the first try
104 req
[0] = ISO15693_REQ_DATARATE_HIGH
| ISO15693_REQ_INVENTORY
| ISO15693_REQINV_SLOT1
;
105 req
[1] = ISO15693_INVENTORY
;
106 req
[2] = 0; // mask length
107 reqlen
= AddCrc(req
,3);
112 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000)) {
113 recv
= resp
.d
.asBytes
;
114 if (resp
.arg
[0]>=12 && ISO15693_CRC_CHECK
==Crc(recv
,12)) {
115 memcpy(buf
,&recv
[2],8);
124 // return a clear-text message to an errorcode
125 static char* TagErrorStr(uint8_t error
) {
127 case 0x01: return "The command is not supported";
128 case 0x02: return "The command is not recognised";
129 case 0x03: return "The option is not supported.";
130 case 0x0f: return "Unknown error.";
131 case 0x10: return "The specified block is not available (doesn't exist).";
132 case 0x11: return "The specified block is already -locked and thus cannot be locked again";
133 case 0x12: return "The specified block is locked and its content cannot be changed.";
134 case 0x13: return "The specified block was not successfully programmed.";
135 case 0x14: return "The specified block was not successfully locked.";
136 default: return "Reserved for Future Use or Custom command error.";
142 int CmdHF15Demod(const char *Cmd
)
144 // The sampling rate is 106.353 ksps/s, for T = 18.8 us
147 int max
= 0, maxPos
= 0;
151 if (GraphTraceLen
< 2000) return 0;
153 // First, correlate for SOF
154 for (i
= 0; i
< 200; i
++) {
156 for (j
= 0; j
< arraylen(Iso15693FrameSOF
); j
+= skip
) {
157 corr
+= Iso15693FrameSOF
[j
] * GraphBuffer
[i
+ (j
/ skip
)];
164 PrintAndLog("SOF at %d, correlation %d", maxPos
,
165 max
/ (arraylen(Iso15693FrameSOF
) / skip
));
167 i
= maxPos
+ arraylen(Iso15693FrameSOF
) / skip
;
170 memset(outBuf
, 0, sizeof(outBuf
));
173 int corr0
= 0, corr00
= 0, corr01
= 0, corr1
= 0, corrEOF
= 0;
174 for(j
= 0; j
< arraylen(Iso15693Logic0
); j
+= skip
) {
175 corr0
+= Iso15693Logic0
[j
]*GraphBuffer
[i
+(j
/skip
)];
177 corr01
= corr00
= corr0
;
178 for(j
= 0; j
< arraylen(Iso15693Logic0
); j
+= skip
) {
179 corr00
+= Iso15693Logic0
[j
]*GraphBuffer
[i
+arraylen(Iso15693Logic0
)/skip
+(j
/skip
)];
180 corr01
+= Iso15693Logic1
[j
]*GraphBuffer
[i
+arraylen(Iso15693Logic0
)/skip
+(j
/skip
)];
182 for(j
= 0; j
< arraylen(Iso15693Logic1
); j
+= skip
) {
183 corr1
+= Iso15693Logic1
[j
]*GraphBuffer
[i
+(j
/skip
)];
185 for(j
= 0; j
< arraylen(Iso15693FrameEOF
); j
+= skip
) {
186 corrEOF
+= Iso15693FrameEOF
[j
]*GraphBuffer
[i
+(j
/skip
)];
188 // Even things out by the length of the target waveform.
194 if(corrEOF
> corr1
&& corrEOF
> corr00
&& corrEOF
> corr01
) {
195 PrintAndLog("EOF at %d", i
);
197 } else if (corr1
> corr0
) {
198 i
+= arraylen(Iso15693Logic1
) / skip
;
201 i
+= arraylen(Iso15693Logic0
) / skip
;
208 if ((i
+ (int)arraylen(Iso15693FrameEOF
)) >= GraphTraceLen
) {
209 PrintAndLog("ran off end!");
214 PrintAndLog("error, uneven octet! (discard extra bits!)");
215 PrintAndLog(" mask=%02x", mask
);
217 PrintAndLog("%d octets", k
);
219 for (i
= 0; i
< k
; i
++) {
220 PrintAndLog("# %2d: %02x ", i
, outBuf
[i
]);
222 PrintAndLog("CRC=%04x", Iso15693Crc(outBuf
, k
- 2));
228 // * Acquire Samples as Reader (enables carrier, sends inquiry)
229 int CmdHF15Read(const char *Cmd
)
231 UsbCommand c
= {CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693
};
236 // Record Activity without enabling carrier
237 int CmdHF15Snoop(const char *Cmd
)
239 UsbCommand c
= {CMD_SNOOP_ISO_15693
};
244 int HF15Reader(const char *Cmd
, bool verbose
)
249 if (verbose
) PrintAndLog("No Tag found.");
253 PrintAndLog("UID: %s", sprintUID(NULL
,uid
));
254 PrintAndLog("Manufacturer byte: %02X, %s", uid
[6], getManufacturerName(uid
[6]));
255 PrintAndLog("Chip ID: %02X, %s", uid
[5], getChipInfo(uid
[6], uid
[5]));
259 int CmdHF15Reader(const char *Cmd
)
261 UsbCommand c
= {CMD_READER_ISO_15693
, {strtol(Cmd
, NULL
, 0), 0, 0}};
266 // Simulation is still not working very good
267 int CmdHF15Sim(const char *Cmd
)
269 char cmdp
= param_getchar(Cmd
, 0);
270 uint8_t uid
[8] = {0x00};
272 //E0 16 24 00 00 00 00 00
273 if (cmdp
== 'h' || cmdp
== 'H') {
274 PrintAndLog("Usage: hf 15 sim <UID>");
276 PrintAndLog(" sample: hf 15 sim E016240000000000");
280 if (param_gethex(Cmd
, 0, uid
, 16)) {
281 PrintAndLog("UID must include 16 HEX symbols");
285 PrintAndLog("Starting simulating UID %02X %02X %02X %02X %02X %02X %02X %02X",
286 uid
[0],uid
[1],uid
[2],uid
[3],uid
[4], uid
[5], uid
[6], uid
[7]);
287 PrintAndLog("Press the button to stop simulation");
289 UsbCommand c
= {CMD_SIMTAG_ISO_15693
, {0, 0, 0}};
290 memcpy(c
.d
.asBytes
,uid
,8);
296 // finds the AFI (Application Family Idendifier) of a card, by trying all values
297 // (There is no standard way of reading the AFI, allthough some tags support this)
298 int CmdHF15Afi(const char *Cmd
)
300 UsbCommand c
= {CMD_ISO_15693_FIND_AFI
, {strtol(Cmd
, NULL
, 0), 0, 0}};
305 // Reads all memory pages
306 int CmdHF15DumpMem(const char*Cmd
) {
310 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
311 uint8_t *req
=c
.d
.asBytes
;
317 PrintAndLog("No Tag found.");
321 PrintAndLog("Reading memory from tag");
322 PrintAndLog("UID: %s", sprintUID(NULL
,uid
));
323 PrintAndLog("Manufacturer byte: %02X, %s", uid
[6], getManufacturerName(uid
[6]));
324 PrintAndLog("Chip ID: %02X, %s", uid
[5], getChipInfo(uid
[6], uid
[5]));
326 for (int retry
=0; retry
<5; retry
++) {
328 req
[0]= ISO15693_REQ_DATARATE_HIGH
| ISO15693_REQ_ADDRESS
;
329 req
[1] = ISO15693_READBLOCK
;
330 memcpy(&req
[2],uid
,8);
332 reqlen
= AddCrc(req
,11);
337 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000)) {
338 recv
= resp
.d
.asBytes
;
339 if (ISO15693_CRC_CHECK
==Crc(recv
,resp
.arg
[0])) {
340 if (!(recv
[0] & ISO15693_RES_ERROR
)) {
342 *output
=0; // reset outputstring
343 sprintf(output
, "Block %02x ",blocknum
);
344 for ( int i
=1; i
<resp
.arg
[0]-2; i
++) { // data in hex
345 sprintf(output
+strlen(output
),"%02X ",recv
[i
]);
348 for ( int i
=1; i
<resp
.arg
[0]-2; i
++) { // data in cleaned ascii
349 sprintf(output
+strlen(output
),"%c",(recv
[i
]>31 && recv
[i
]<127)?recv
[i
]:'.');
351 PrintAndLog("%s",output
);
353 // PrintAndLog("bn=%i",blocknum);
355 PrintAndLog("Tag returned Error %i: %s",recv
[1],TagErrorStr(recv
[1]));
358 } // else PrintAndLog("crc");
359 } // else PrintAndLog("r null");
362 // if (resp.arg[0]<3)
363 // PrintAndLog("Lost Connection");
364 // else if (ISO15693_CRC_CHECK!=Crc(resp.d.asBytes,resp.arg[0]))
365 // PrintAndLog("CRC Failed");
367 // PrintAndLog("Tag returned Error %i: %s",recv[1],TagErrorStr(recv[1]));
374 static command_t CommandTable15
[] =
376 {"help", CmdHF15Help
, 1, "This help"},
377 {"demod", CmdHF15Demod
, 1, "Demodulate ISO15693 from tag"},
378 {"read", CmdHF15Read
, 0, "Read HF tag (ISO 15693)"},
379 {"snoop", CmdHF15Snoop
, 0, "Eavesdrop ISO 15693 communications"},
380 {"reader", CmdHF15Reader
, 0, "Act like an ISO15693 reader"},
381 {"sim", CmdHF15Sim
, 0, "Fake an ISO15693 tag"},
382 {"cmd", CmdHF15Cmd
, 0, "Send direct commands to ISO15693 tag"},
383 {"findafi", CmdHF15Afi
, 0, "Brute force AFI of an ISO15693 tag"},
384 {"dumpmemory", CmdHF15DumpMem
, 0, "Read all memory pages of an ISO15693 tag"},
385 {NULL
, NULL
, 0, NULL
}
388 int CmdHF15(const char *Cmd
)
390 CmdsParse(CommandTable15
, Cmd
);
394 int CmdHF15Help(const char *Cmd
)
396 CmdsHelp(CommandTable15
);
401 // "HF 15 Cmd" Interface
402 // Allows direct communication with the tag on command level
404 int CmdHF15CmdInquiry(const char *Cmd
)
408 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
409 uint8_t *req
=c
.d
.asBytes
;
412 req
[0] = ISO15693_REQ_DATARATE_HIGH
| ISO15693_REQ_INVENTORY
| ISO15693_REQINV_SLOT1
;
413 req
[1] = ISO15693_INVENTORY
;
414 req
[2] = 0; // mask length
415 reqlen
=AddCrc(req
,3);
420 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000)) {
421 if (resp
.arg
[0]>=12) {
422 recv
= resp
.d
.asBytes
;
423 PrintAndLog("UID: %s", sprintUID(NULL
,recv
+2));
424 PrintAndLog("Manufacturer byte: %02X, %s", recv
[8], getManufacturerName(recv
[8]));
425 PrintAndLog("Chip ID: %02X, %s", recv
[7], getChipInfo(recv
[8], recv
[7]));
427 PrintAndLog("Response to short, just %i bytes. No tag?\n",resp
.arg
[0]);
430 PrintAndLog("timeout.");
436 // Turns debugging on(1)/off(0)
437 int CmdHF15CmdDebug( const char *cmd
) {
438 int debug
= atoi(cmd
);
439 if (strlen(cmd
) < 1) {
440 PrintAndLog("Usage: hf 15 debug <0|1>");
441 PrintAndLog(" 0 no debugging");
442 PrintAndLog(" 1 turn debugging on");
446 UsbCommand c
= {CMD_ISO_15693_DEBUG
, {debug
, 0, 0}};
452 int CmdHF15CmdRaw (const char *cmd
) {
455 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
462 unsigned int datalen
=0, temp
;
467 PrintAndLog("Usage: hf 15 cmd raw [-r] [-2] [-c] <0A 0B 0C ... hex>");
468 PrintAndLog(" -r do not read response");
469 PrintAndLog(" -2 use slower '1 out of 256' mode");
470 PrintAndLog(" -c calculate and append CRC");
471 PrintAndLog(" Tip: turn on debugging for verbose output");
476 while (*cmd
==' ' || *cmd
=='\t') cmd
++;
478 while (cmd
[i
]!='\0') {
479 if (cmd
[i
]==' ' || cmd
[i
]=='\t') { i
++; continue; }
494 PrintAndLog("Invalid option");
500 if ((cmd
[i
]>='0' && cmd
[i
]<='9') ||
501 (cmd
[i
]>='a' && cmd
[i
]<='f') ||
502 (cmd
[i
]>='A' && cmd
[i
]<='F') ) {
503 buf
[strlen(buf
)+1]=0;
504 buf
[strlen(buf
)]=cmd
[i
];
507 if (strlen(buf
)>=2) {
508 sscanf(buf
,"%x",&temp
);
509 data
[datalen
]=(uint8_t)(temp
& 0xff);
515 PrintAndLog("Invalid char on input");
518 if (crc
) datalen
=AddCrc(data
,datalen
);
523 memcpy(c
.d
.asBytes
,data
,datalen
);
528 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000)) {
529 recv
= resp
.d
.asBytes
;
530 PrintAndLog("received %i octets",resp
.arg
[0]);
531 hexout
= (char *)malloc(resp
.arg
[0] * 3 + 1);
532 if (hexout
!= NULL
) {
533 for (int i
= 0; i
< resp
.arg
[0]; i
++) { // data in hex
534 sprintf(&hexout
[i
* 3], "%02X ", recv
[i
]);
536 PrintAndLog("%s", hexout
);
540 PrintAndLog("timeout while waiting for reply.");
549 * parses common HF 15 CMD parameters and prepares some data structures
553 int prepareHF15Cmd(char **cmd
, UsbCommand
*c
, uint8_t iso15cmd
[], int iso15cmdlen
) {
555 uint8_t *req
=c
->d
.asBytes
;
556 uint8_t uid
[8] = {0x00};
560 while (**cmd
==' ' || **cmd
=='\t') (*cmd
)++;
562 if (strstr(*cmd
,"-2")==*cmd
) {
563 c
->arg
[1]=0; // use 1of256
568 while (**cmd
==' ' || **cmd
=='\t') (*cmd
)++;
570 if (strstr(*cmd
,"-o")==*cmd
) {
571 req
[reqlen
]=ISO15693_REQ_OPTION
;
576 while (**cmd
==' ' || **cmd
=='\t') (*cmd
)++;
580 PrintAndLog("missing addr");
585 // you must have selected the tag earlier
586 req
[reqlen
++] |= ISO15693_REQ_DATARATE_HIGH
| ISO15693_REQ_SELECT
;
587 memcpy(&req
[reqlen
],&iso15cmd
[0],iso15cmdlen
);
588 reqlen
+= iso15cmdlen
;
592 // unaddressed mode may not be supported by all vendors
593 req
[reqlen
++] |= ISO15693_REQ_DATARATE_HIGH
;
594 memcpy(&req
[reqlen
],&iso15cmd
[0],iso15cmdlen
);
595 reqlen
+= iso15cmdlen
;
598 // we scan for the UID ourself
599 req
[reqlen
++] |= ISO15693_REQ_DATARATE_HIGH
| ISO15693_REQ_ADDRESS
;
600 memcpy(&req
[reqlen
],&iso15cmd
[0],iso15cmdlen
);
603 PrintAndLog("No Tag found");
606 memcpy(req
+reqlen
,uid
,8);
607 PrintAndLog("Detected UID %s",sprintUID(NULL
,uid
));
611 req
[reqlen
++] |= ISO15693_REQ_DATARATE_HIGH
| ISO15693_REQ_ADDRESS
;
612 memcpy(&req
[reqlen
],&iso15cmd
[0],iso15cmdlen
);
615 /* sscanf(cmd,"%hX%hX%hX%hX%hX%hX%hX%hX",
616 (short unsigned int *)&uid[7],(short unsigned int *)&uid[6],
617 (short unsigned int *)&uid[5],(short unsigned int *)&uid[4],
618 (short unsigned int *)&uid[3],(short unsigned int *)&uid[2],
619 (short unsigned int *)&uid[1],(short unsigned int *)&uid[0]); */
620 for (int i
=0;i
<8 && (*cmd
)[i
*2] && (*cmd
)[i
*2+1];i
++) { // parse UID
621 sscanf((char[]){(*cmd
)[i
*2],(*cmd
)[i
*2+1],0},"%X",&temp
);
625 PrintAndLog("Using UID %s",sprintUID(NULL
,uid
));
626 memcpy(&req
[reqlen
],&uid
[0],8);
629 // skip to next space
630 while (**cmd
!=' ' && **cmd
!='\t') (*cmd
)++;
631 // skip over the space
632 while (**cmd
==' ' || **cmd
=='\t') (*cmd
)++;
639 * Commandline handling: HF15 CMD SYSINFO
640 * get system information from tag/VICC
642 int CmdHF15CmdSysinfo(const char *Cmd
) {
645 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
646 uint8_t *req
=c
.d
.asBytes
;
650 char output
[2048]="";
657 PrintAndLog("Usage: hf 15 cmd sysinfo [options] <uid|s|u|*>");
658 PrintAndLog(" options:");
659 PrintAndLog(" -2 use slower '1 out of 256' mode");
660 PrintAndLog(" uid (either): ");
661 PrintAndLog(" <8B hex> full UID eg E011223344556677");
662 PrintAndLog(" s selected tag");
663 PrintAndLog(" u unaddressed mode");
664 PrintAndLog(" * scan for tag");
665 PrintAndLog(" start#: page number to start 0-255");
666 PrintAndLog(" count#: number of pages");
670 prepareHF15Cmd(&cmd
, &c
,(uint8_t[]){ISO15693_GET_SYSTEM_INFO
},1);
673 reqlen
=AddCrc(req
,reqlen
);
678 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000) && resp
.arg
[0]>2) {
679 recv
= resp
.d
.asBytes
;
680 if (ISO15693_CRC_CHECK
==Crc(recv
,resp
.arg
[0])) {
681 if (!(recv
[0] & ISO15693_RES_ERROR
)) {
682 *output
=0; // reset outputstring
683 PrintAndLog("UID: %s", sprintUID(NULL
,recv
+2));
684 PrintAndLog("Manufacturer byte: %02X, %s", recv
[8], getManufacturerName(recv
[8]));
685 PrintAndLog("Chip ID: %02X, %s", recv
[7], getChipInfo(recv
[8], recv
[7]));
688 sprintf(output
+strlen(output
),"DSFID supported, set to %02X\n\r",recv
[i
++]);
690 strcat(output
,"DSFID not supported\n\r");
692 sprintf(output
+strlen(output
),"AFI supported, set to %03X\n\r",recv
[i
++]);
694 strcat(output
,"AFI not supported\n\r");
695 if (recv
[1] & 0x04) {
696 strcat(output
,"Tag provides info on memory layout (vendor dependent)\n\r");
697 sprintf(output
+strlen(output
)," %i (or %i) bytes/page x %i pages \n\r",
698 (recv
[i
+1]&0x1F)+1, (recv
[i
+1]&0x1F), recv
[i
]+1);
701 strcat(output
,"Tag does not provide information on memory layout\n\r");
702 if (recv
[1] & 0x08) sprintf(output
+strlen(output
),"IC reference given: %02X\n\r",recv
[i
++]);
703 else strcat(output
,"IC reference not given\n\r");
706 PrintAndLog("%s",output
);
708 PrintAndLog("Tag returned Error %i: %s",recv
[0],TagErrorStr(recv
[0]));
711 PrintAndLog("CRC failed");
714 PrintAndLog("timeout: no answer");
721 * Commandline handling: HF15 CMD READMULTI
722 * Read multiple blocks at once (not all tags support this)
724 int CmdHF15CmdReadmulti(const char *Cmd
) {
727 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
728 uint8_t *req
=c
.d
.asBytes
;
729 int reqlen
=0, pagenum
,pagecount
;
732 char output
[2048]="";
738 PrintAndLog("Usage: hf 15 cmd readmulti [options] <uid|s|u|*> <start#> <count#>");
739 PrintAndLog(" options:");
740 PrintAndLog(" -2 use slower '1 out of 256' mode");
741 PrintAndLog(" uid (either): ");
742 PrintAndLog(" <8B hex> full UID eg E011223344556677");
743 PrintAndLog(" s selected tag");
744 PrintAndLog(" u unaddressed mode");
745 PrintAndLog(" * scan for tag");
746 PrintAndLog(" start#: page number to start 0-255");
747 PrintAndLog(" count#: number of pages");
751 prepareHF15Cmd(&cmd
, &c
,(uint8_t[]){ISO15693_READ_MULTI_BLOCK
},1);
754 pagenum
=strtol(cmd
,NULL
,0);
756 // skip to next space
757 while (*cmd
!=' ' && *cmd
!='\t') cmd
++;
758 // skip over the space
759 while (*cmd
==' ' || *cmd
=='\t') cmd
++;
761 pagecount
=strtol(cmd
,NULL
,0);
762 if (pagecount
>0) pagecount
--; // 0 means 1 page, 1 means 2 pages, ...
764 req
[reqlen
++]=(uint8_t)pagenum
;
765 req
[reqlen
++]=(uint8_t)pagecount
;
767 reqlen
=AddCrc(req
,reqlen
);
773 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000) && resp
.arg
[0]>2) {
774 recv
= resp
.d
.asBytes
;
775 if (ISO15693_CRC_CHECK
==Crc(recv
,resp
.arg
[0])) {
776 if (!(recv
[0] & ISO15693_RES_ERROR
)) {
777 *output
=0; // reset outputstring
778 for ( int i
=1; i
<resp
.arg
[0]-2; i
++) {
779 sprintf(output
+strlen(output
),"%02X ",recv
[i
]);
782 for ( int i
=1; i
<resp
.arg
[0]-2; i
++) {
783 sprintf(output
+strlen(output
),"%c",recv
[i
]>31 && recv
[i
]<127?recv
[i
]:'.');
785 PrintAndLog("%s",output
);
787 PrintAndLog("Tag returned Error %i: %s",recv
[0],TagErrorStr(recv
[0]));
790 PrintAndLog("CRC failed");
793 PrintAndLog("no answer");
800 * Commandline handling: HF15 CMD READ
801 * Reads a single Block
803 int CmdHF15CmdRead(const char *Cmd
) {
806 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
807 uint8_t *req
=c
.d
.asBytes
;
808 int reqlen
=0, pagenum
;
817 PrintAndLog("Usage: hf 15 cmd read [options] <uid|s|u|*> <page#>");
818 PrintAndLog(" options:");
819 PrintAndLog(" -2 use slower '1 out of 256' mode");
820 PrintAndLog(" uid (either): ");
821 PrintAndLog(" <8B hex> full UID eg E011223344556677");
822 PrintAndLog(" s selected tag");
823 PrintAndLog(" u unaddressed mode");
824 PrintAndLog(" * scan for tag");
825 PrintAndLog(" page#: page number 0-255");
829 prepareHF15Cmd(&cmd
, &c
,(uint8_t[]){ISO15693_READBLOCK
},1);
832 pagenum
=strtol(cmd
,NULL
,0);
834 PrintAndLog("invalid pagenum");
838 req
[reqlen
++]=(uint8_t)pagenum
;
840 reqlen
=AddCrc(req
,reqlen
);
846 if (WaitForResponseTimeout(CMD_ACK
,&resp
,1000) && resp
.arg
[0]>2) {
847 recv
= resp
.d
.asBytes
;
848 if (ISO15693_CRC_CHECK
==Crc(recv
,resp
.arg
[0])) {
849 if (!(recv
[0] & ISO15693_RES_ERROR
)) {
850 *output
=0; // reset outputstring
851 //sprintf(output, "Block %2i ",blocknum);
852 for ( int i
=1; i
<resp
.arg
[0]-2; i
++) {
853 sprintf(output
+strlen(output
),"%02X ",recv
[i
]);
856 for ( int i
=1; i
<resp
.arg
[0]-2; i
++) {
857 sprintf(output
+strlen(output
),"%c",recv
[i
]>31 && recv
[i
]<127?recv
[i
]:'.');
859 PrintAndLog("%s",output
);
861 PrintAndLog("Tag returned Error %i: %s",recv
[1],TagErrorStr(recv
[1]));
864 PrintAndLog("CRC failed");
867 PrintAndLog("no answer");
875 * Commandline handling: HF15 CMD WRITE
876 * Writes a single Block - might run into timeout, even when successful
878 int CmdHF15CmdWrite(const char *Cmd
) {
881 UsbCommand c
= {CMD_ISO_15693_COMMAND
, {0, 1, 1}}; // len,speed,recv?
882 uint8_t *req
=c
.d
.asBytes
;
883 int reqlen
=0, pagenum
, temp
;
892 PrintAndLog("Usage: hf 15 cmd write [options] <uid|s|u|*> <page#> <hexdata>");
893 PrintAndLog(" options:");
894 PrintAndLog(" -2 use slower '1 out of 256' mode");
895 PrintAndLog(" -o set OPTION Flag (needed for TI)");
896 PrintAndLog(" uid (either): ");
897 PrintAndLog(" <8B hex> full UID eg E011223344556677");
898 PrintAndLog(" s selected tag");
899 PrintAndLog(" u unaddressed mode");
900 PrintAndLog(" * scan for tag");
901 PrintAndLog(" page#: page number 0-255");
902 PrintAndLog(" hexdata: data to be written eg AA BB CC DD");
906 prepareHF15Cmd(&cmd
, &c
,(uint8_t[]){ISO15693_WRITEBLOCK
},1);
909 // *cmd -> page num ; *cmd2 -> data
911 while (*cmd2
!=' ' && *cmd2
!='\t' && *cmd2
) cmd2
++;
915 pagenum
=strtol(cmd
,NULL
,0);
917 PrintAndLog("invalid pagenum");
920 req
[reqlen
++]=(uint8_t)pagenum
;
923 while (cmd2
[0] && cmd2
[1]) { // hexdata, read by 2 hexchars
928 sscanf((char[]){cmd2
[0],cmd2
[1],0},"%X",&temp
);
929 req
[reqlen
++]=temp
& 0xff;
933 reqlen
=AddCrc(req
,reqlen
);
939 if (WaitForResponseTimeout(CMD_ACK
,&resp
,2000) && resp
.arg
[0]>2) {
940 recv
= resp
.d
.asBytes
;
941 if (ISO15693_CRC_CHECK
==Crc(recv
,resp
.arg
[0])) {
942 if (!(recv
[0] & ISO15693_RES_ERROR
)) {
945 PrintAndLog("Tag returned Error %i: %s",recv
[1],TagErrorStr(recv
[1]));
948 PrintAndLog("CRC failed");
951 PrintAndLog("timeout: no answer - data may be written anyway");
959 static command_t CommandTable15Cmd
[] =
961 {"help", CmdHF15CmdHelp
, 1, "This Help"},
962 {"inquiry", CmdHF15CmdInquiry
, 0, "Search for tags in range"},
964 {"select", CmdHF15CmdSelect, 0, "Select an tag with a specific UID for further commands"},
966 {"read", CmdHF15CmdRead
, 0, "Read a block"},
967 {"write", CmdHF15CmdWrite
, 0, "Write a block"},
968 {"readmulti",CmdHF15CmdReadmulti
, 0, "Reads multiple Blocks"},
969 {"sysinfo",CmdHF15CmdSysinfo
, 0, "Get Card Information"},
970 {"raw", CmdHF15CmdRaw
, 0, "Send raw hex data to tag"},
971 {"debug", CmdHF15CmdDebug
, 0, "Turn debugging on/off"},
972 {NULL
, NULL
, 0, NULL
}
975 int CmdHF15Cmd(const char *Cmd
)
977 CmdsParse(CommandTable15Cmd
, Cmd
);
981 int CmdHF15CmdHelp(const char *Cmd
)
983 CmdsHelp(CommandTable15Cmd
);