cvs.zerfleddert.de Git - proxmark3-svn/blob - armsrc/ticks.c

   1 //-----------------------------------------------------------------------------
   2 // Jonathan Westhues, Sept 2005
   3 // Iceman, Sept 2016
   4 //
   5 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
   6 // at your option, any later version. See the LICENSE.txt file for the text of
   7 // the license.
   8 //-----------------------------------------------------------------------------
   9 // Timers, Clocks functions used in LF or Legic where you would need detailed time.
  10 //-----------------------------------------------------------------------------
  11 #include "ticks.h"
  12
  13 // attempt at high resolution microsecond timer
  14 // beware: timer counts in 21.3uS increments (1024/48Mhz)
  15 void SpinDelayUs(int us) {
  16         int ticks = (48 * us) >> 10;
  17
  18         // Borrow a PWM unit for my real-time clock
  19         AT91C_BASE_PWMC->PWMC_ENA = PWM_CHANNEL(0);
  20
  21         // 48 MHz / 1024 gives 46.875 kHz
  22         AT91C_BASE_PWMC_CH0->PWMC_CMR = PWM_CH_MODE_PRESCALER(10);
  23         AT91C_BASE_PWMC_CH0->PWMC_CDTYR = 0;
  24         AT91C_BASE_PWMC_CH0->PWMC_CPRDR = 0xffff;
  25
  26         uint16_t start = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;
  27
  28         for(;;) {
  29                 uint16_t now = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;
  30                 if (now == (uint16_t)(start + ticks))
  31                         return;
  32
  33                 WDT_HIT();
  34         }
  35 }
  36
  37 void SpinDelay(int ms) {
  38   // convert to uS and call microsecond delay function
  39         SpinDelayUs(ms*1000);
  40 }
  41 //  -------------------------------------------------------------------------
  42 //  timer lib
  43 //  -------------------------------------------------------------------------
  44 //  test procedure:
  45 //
  46 //      ti = GetTickCount();
  47 //      SpinDelay(1000);
  48 //      ti = GetTickCount() - ti;
  49 //      Dbprintf("timer(1s): %d t=%d", ti, GetTickCount());
  50 void StartTickCount(void) {
  51         // This timer is based on the slow clock. The slow clock frequency is between 22kHz and 40kHz.
  52         // We can determine the actual slow clock frequency by looking at the Main Clock Frequency Register.
  53     uint16_t mainf = AT91C_BASE_PMC->PMC_MCFR & 0xffff;         // = 16 * main clock frequency (16MHz) / slow clock frequency
  54         // set RealTimeCounter divider to count at 1kHz:
  55         AT91C_BASE_RTTC->RTTC_RTMR = AT91C_RTTC_RTTRST | ((256000 + (mainf/2)) / mainf);
  56         // note: worst case precision is approx 2.5%
  57 }
  58
  59 /*
  60 * Get the current count.
  61 */
  62 uint32_t RAMFUNC GetTickCount(void){
  63         return AT91C_BASE_RTTC->RTTC_RTVR;// was * 2;
  64 }
  65
  66 //  -------------------------------------------------------------------------
  67 //  microseconds timer
  68 //  -------------------------------------------------------------------------
  69 void StartCountUS(void) {
  70         AT91C_BASE_PMC->PMC_PCER |= (1 << 12) | (1 << 13) | (1 << 14);
  71         AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE;
  72
  73         // fast clock
  74         // tick=1.5mks
  75         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // timer disable
  76         AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz) / 32
  77                                                                 AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR |
  78                                                                 AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET;
  79         AT91C_BASE_TC0->TC_RA = 1;
  80         AT91C_BASE_TC0->TC_RC = 0xBFFF + 1; // 0xC000
  81
  82         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; // timer disable
  83         AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from timer 0
  84
  85         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
  86         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
  87         AT91C_BASE_TCB->TCB_BCR = 1;
  88
  89         while (AT91C_BASE_TC1->TC_CV >= 1);
  90 }
  91
  92 uint32_t RAMFUNC GetCountUS(void){
  93         //return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10);
  94         //  By suggestion from PwPiwi, http://www.proxmark.org/forum/viewtopic.php?pid=17548#p17548
  95         return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3);
  96 }
  97
  98
  99 //  -------------------------------------------------------------------------
 100 //  Timer for iso14443 commands. Uses ssp_clk from FPGA
 101 //  -------------------------------------------------------------------------
 102 void StartCountSspClk(void) {
 103         AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0) | (1 << AT91C_ID_TC1) | (1 << AT91C_ID_TC2);  // Enable Clock to all timers
 104         AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_TIOA1               // XC0 Clock = TIOA1
 105                                                         | AT91C_TCB_TC1XC1S_NONE                // XC1 Clock = none
 106                                                         | AT91C_TCB_TC2XC2S_TIOA0;              // XC2 Clock = TIOA0
 107
 108         // configure TC1 to create a short pulse on TIOA1 when a rising edge on TIOB1 (= ssp_clk from FPGA) occurs:
 109         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;                               // disable TC1
 110         AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK // TC1 Clock = MCK(48MHz)/2 = 24MHz
 111                                                         | AT91C_TC_CPCSTOP                              // Stop clock on RC compare
 112                                                         | AT91C_TC_EEVTEDG_RISING               // Trigger on rising edge of Event
 113                                                         | AT91C_TC_EEVT_TIOB                    // Event-Source: TIOB1 (= ssp_clk from FPGA = 13,56MHz/16)
 114                                                         | AT91C_TC_ENETRG                               // Enable external trigger event
 115                                                         | AT91C_TC_WAVESEL_UP                   // Upmode without automatic trigger on RC compare
 116                                                         | AT91C_TC_WAVE                                 // Waveform Mode
 117                                                         | AT91C_TC_AEEVT_SET                    // Set TIOA1 on external event
 118                                                         | AT91C_TC_ACPC_CLEAR;                  // Clear TIOA1 on RC Compare
 119         AT91C_BASE_TC1->TC_RC = 0x04;                                                   // RC Compare value = 0x04
 120
 121         // use TC0 to count TIOA1 pulses
 122         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;                               // disable TC0
 123         AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_XC0                              // TC0 clock = XC0 clock = TIOA1
 124                                                         | AT91C_TC_WAVE                                 // Waveform Mode
 125                                                         | AT91C_TC_WAVESEL_UP                   // just count
 126                                                         | AT91C_TC_ACPA_CLEAR                   // Clear TIOA0 on RA Compare
 127                                                         | AT91C_TC_ACPC_SET;                    // Set TIOA0 on RC Compare
 128         AT91C_BASE_TC0->TC_RA = 1;                                                              // RA Compare value = 1; pulse width to TC2
 129         AT91C_BASE_TC0->TC_RC = 0;                                                              // RC Compare value = 0; increment TC2 on overflow
 130
 131         // use TC2 to count TIOA0 pulses (giving us a 32bit counter (TC0/TC2) clocked by ssp_clk)
 132         AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKDIS;                               // disable TC2
 133         AT91C_BASE_TC2->TC_CMR = AT91C_TC_CLKS_XC2                              // TC2 clock = XC2 clock = TIOA0
 134                                                         | AT91C_TC_WAVE                                 // Waveform Mode
 135                                                         | AT91C_TC_WAVESEL_UP;                  // just count
 136
 137         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;                               // enable and reset TC0
 138         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;                               // enable and reset TC1
 139         AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;                               // enable and reset TC2
 140
 141         // synchronize the counter with the ssp_frame signal.
 142         // Note: FPGA must be in any iso14443 mode, otherwise the frame signal would not be present
 143         while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME));   // wait for ssp_frame to go high (start of frame)
 144         while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME);              // wait for ssp_frame to be low
 145         while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK));     // wait for ssp_clk to go high
 146
 147         // note: up to now two ssp_clk rising edges have passed since the rising edge of ssp_frame
 148         // it is now safe to assert a sync signal. This sets all timers to 0 on next active clock edge
 149         AT91C_BASE_TCB->TCB_BCR = 1;                                                    // assert Sync (set all timers to 0 on next active clock edge)
 150         // at the next (3rd) ssp_clk rising edge, TC1 will be reset (and not generate a clock signal to TC0)
 151         // at the next (4th) ssp_clk rising edge, TC0 (the low word of our counter) will be reset. From now on,
 152         // whenever the last three bits of our counter go 0, we can be sure to be in the middle of a frame transfer.
 153         // (just started with the transfer of the 4th Bit).
 154
 155         // The high word of the counter (TC2) will not reset until the low word (TC0) overflows.
 156         // Therefore need to wait quite some time before we can use the counter.
 157         while (AT91C_BASE_TC2->TC_CV >= 1);
 158 }
 159 void ResetSspClk(void) {
 160         //enable clock of timer and software trigger
 161         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 162         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 163         AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 164         while (AT91C_BASE_TC2->TC_CV >= 1);
 165 }
 166
 167 uint32_t RAMFUNC GetCountSspClk(void) {
 168         uint32_t tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV;
 169         if ((tmp_count & 0x0000ffff) == 0)  //small chance that we may have missed an increment in TC2
 170                 return (AT91C_BASE_TC2->TC_CV << 16);
 171         return tmp_count;
 172 }
 173
 174
 175 //  -------------------------------------------------------------------------
 176 //  Timer for bitbanging,  or LF stuff when you need a very precis timer
 177 //  1us = 1.5ticks
 178 //  -------------------------------------------------------------------------
 179 void StartTicks(void){
 180         //initialization of the timer
 181         // tc1 is higher 0xFFFF0000
 182         // tc0 is lower 0x0000FFFF
 183         AT91C_BASE_PMC->PMC_PCER |= (1 << 12) | (1 << 13) | (1 << 14);
 184         AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE;
 185         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
 186         AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz) / 32
 187                                                                 AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR |
 188                                                                 AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET;
 189         AT91C_BASE_TC0->TC_RA = 1;
 190         AT91C_BASE_TC0->TC_RC = 0;
 191
 192         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;       // timer disable
 193         AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_XC1; // from TC0
 194
 195         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 196         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 197         AT91C_BASE_TCB->TCB_BCR = 1;
 198
 199         // wait until timer becomes zero.
 200         while (AT91C_BASE_TC1->TC_CV >= 1);
 201 }
 202 // Wait - Spindelay in ticks.
 203 // if called with a high number, this will trigger the WDT...
 204 void WaitTicks(uint32_t ticks){
 205         if ( ticks == 0 ) return;
 206         ticks += GET_TICKS;
 207         while (GET_TICKS < ticks);
 208 }
 209 // Wait / Spindelay in us (microseconds)
 210 // 1us = 1.5ticks.
 211 void WaitUS(uint16_t us){
 212         if ( us == 0 ) return;
 213         WaitTicks(  (uint32_t)(us * 1.5) );
 214 }
 215 void WaitMS(uint16_t ms){
 216         if (ms == 0) return;
 217         WaitTicks( (uint32_t)(ms * 1500) );
 218 }
 219 // Starts Clock and waits until its reset
 220 void ResetTicks(void){
 221         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 222         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 223         while (AT91C_BASE_TC1->TC_CV >= 1);
 224 }
 225 void ResetTimer(AT91PS_TC timer){
 226         timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
 227         while(timer->TC_CV >= 1) ;
 228 }
 229 // stop clock
 230 void StopTicks(void){
 231         AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
 232         AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
 233 }