cvs.zerfleddert.de Git - proxmark3-svn/blob - fpga/fpga_lf.v

   1 //-----------------------------------------------------------------------------
   2 // Jonathan Westhues, March 2006
   3 // iZsh <izsh at fail0verflow.com>, June 2014
   4 //-----------------------------------------------------------------------------
   5
   6 `include "lo_read.v"
   7 `include "lo_passthru.v"
   8 `include "lo_edge_detect.v"
   9 `include "util.v"
  10 `include "clk_divider.v"
  11
  12 module fpga_lf(
  13         input spck, output miso, input mosi, input ncs,
  14         input pck0, input ck_1356meg, input ck_1356megb,
  15         output pwr_lo, output pwr_hi,
  16         output pwr_oe1, output pwr_oe2, output pwr_oe3, output pwr_oe4,
  17         input [7:0] adc_d, output adc_clk, output adc_noe,
  18         output ssp_frame, output ssp_din, input ssp_dout, output ssp_clk,
  19         input cross_hi, input cross_lo,
  20         output dbg
  21 );
  22
  23 //-----------------------------------------------------------------------------
  24 // The SPI receiver. This sets up the configuration word, which the rest of
  25 // the logic looks at to determine how to connect the A/D and the coil
  26 // drivers (i.e., which section gets it). Also assign some symbolic names
  27 // to the configuration bits, for use below.
  28 //-----------------------------------------------------------------------------
  29
  30 reg [15:0] shift_reg;
  31 reg [7:0] divisor;
  32 reg [7:0] conf_word;
  33 reg [7:0] user_byte1;
  34
  35 always @(posedge ncs)
  36 begin
  37         case(shift_reg[15:12])
  38                 4'b0001:
  39                         begin
  40                                 conf_word <= shift_reg[7:0];
  41                                 if (shift_reg[7:0] == 8'b00000001) begin // LF edge detect
  42                                         user_byte1 <= 127; // default threshold
  43                                 end
  44                         end
  45                 4'b0010: divisor <= shift_reg[7:0];                     // FPGA_CMD_SET_DIVISOR
  46                 4'b0011: user_byte1 <= shift_reg[7:0];          // FPGA_CMD_SET_USER_BYTE1
  47         endcase
  48 end
  49
  50 always @(posedge spck)
  51 begin
  52         if(~ncs)
  53         begin
  54                 shift_reg[15:1] <= shift_reg[14:0];
  55                 shift_reg[0] <= mosi;
  56         end
  57 end
  58
  59 wire [2:0] major_mode = conf_word[7:5];
  60
  61 // For the low-frequency configuration:
  62 wire lf_field = conf_word[0];
  63 wire lf_ed_toggle_mode = conf_word[1]; // for lo_edge_detect
  64 wire [7:0] lf_ed_threshold = user_byte1;
  65
  66 //-----------------------------------------------------------------------------
  67 // And then we instantiate the modules corresponding to each of the FPGA's
  68 // major modes, and use muxes to connect the outputs of the active mode to
  69 // the output pins.
  70 //-----------------------------------------------------------------------------
  71 wire [7:0] pck_cnt;
  72 wire pck_divclk;
  73 clk_divider div_clk(pck0, divisor, pck_cnt, pck_divclk);
  74
  75 lo_read lr(
  76         pck0, pck_cnt, pck_divclk,
  77         lr_pwr_lo, lr_pwr_hi, lr_pwr_oe1, lr_pwr_oe2, lr_pwr_oe3, lr_pwr_oe4,
  78         adc_d, lr_adc_clk,
  79         lr_ssp_frame, lr_ssp_din, lr_ssp_clk,
  80         lr_dbg, lf_field
  81 );
  82
  83 lo_passthru lp(
  84         pck_divclk,
  85         lp_pwr_lo, lp_pwr_hi, lp_pwr_oe1, lp_pwr_oe2, lp_pwr_oe3, lp_pwr_oe4,
  86         lp_adc_clk,
  87         lp_ssp_din, ssp_dout,
  88         cross_lo,
  89         lp_dbg
  90 );
  91
  92 lo_edge_detect le(
  93         pck0, pck_divclk,
  94         le_pwr_lo, le_pwr_hi, le_pwr_oe1, le_pwr_oe2, le_pwr_oe3, le_pwr_oe4,
  95         adc_d, le_adc_clk,
  96         le_ssp_frame, ssp_dout, le_ssp_clk,
  97         cross_lo,
  98         le_dbg,
  99         lf_field,
 100         lf_ed_toggle_mode, lf_ed_threshold
 101 );
 102
 103 // Major modes:
 104 //   000 --  LF reader (generic)
 105 //   001 --  LF edge detect (generic)
 106 //   010 --  LF passthru
 107
 108 mux8 mux_ssp_clk                (major_mode, ssp_clk,   lr_ssp_clk,   le_ssp_clk,         1'b0,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 109 mux8 mux_ssp_din                (major_mode, ssp_din,   lr_ssp_din,         1'b0,   lp_ssp_din,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 110 mux8 mux_ssp_frame              (major_mode, ssp_frame, lr_ssp_frame, le_ssp_frame,       1'b0,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 111 mux8 mux_pwr_oe1                (major_mode, pwr_oe1,   lr_pwr_oe1,   le_pwr_oe1,   lp_pwr_oe1,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 112 mux8 mux_pwr_oe2                (major_mode, pwr_oe2,   lr_pwr_oe2,   le_pwr_oe2,   lp_pwr_oe2,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 113 mux8 mux_pwr_oe3                (major_mode, pwr_oe3,   lr_pwr_oe3,   le_pwr_oe3,   lp_pwr_oe3,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 114 mux8 mux_pwr_oe4                (major_mode, pwr_oe4,   lr_pwr_oe4,   le_pwr_oe4,   lp_pwr_oe4,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 115 mux8 mux_pwr_lo                 (major_mode, pwr_lo,    lr_pwr_lo,    le_pwr_lo,    lp_pwr_lo,    1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 116 mux8 mux_pwr_hi                 (major_mode, pwr_hi,    lr_pwr_hi,    le_pwr_hi,    lp_pwr_hi,    1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 117 mux8 mux_adc_clk                (major_mode, adc_clk,   lr_adc_clk,   le_adc_clk,   lp_adc_clk,   1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 118 mux8 mux_dbg                    (major_mode, dbg,       lr_dbg,       le_dbg,       lp_dbg,       1'b0, 1'b0, 1'b0, 1'b0, 1'b0);
 119
 120 // In all modes, let the ADC's outputs be enabled.
 121 assign adc_noe = 1'b0;
 122
 123 endmodule