cvs.zerfleddert.de Git - proxmark3-svn/blob - armsrc/lfsampling.h

   1 #ifndef LFSAMPLING_H
   2 #define LFSAMPLING_H
   3
   4 /**
   5 * Initializes the FPGA for reader-mode (field on), and acquires the samples.
   6 * @return number of bits sampled
   7 **/
   8 uint32_t SampleLF();
   9
  10 /**
  11 * Initializes the FPGA for snoop-mode (field off), and acquires the samples.
  12 * @return number of bits sampled
  13 **/
  14
  15 uint32_t SnoopLF();
  16
  17 /**
  18  * @brief Does sample acquisition, ignoring the config values set in the sample_config.
  19  * This method is typically used by tag-specific readers who just wants to read the samples
  20  * the normal way
  21  * @param trigger_threshold
  22  * @param silent
  23  * @return number of bits sampled
  24  */
  25 uint32_t DoAcquisition_default(int trigger_threshold, bool silent);
  26 /**
  27  * @brief Does sample acquisition, using the config values set in the sample_config.
  28  * @param trigger_threshold
  29  * @param silent
  30  * @return number of bits sampled
  31  */
  32
  33 uint32_t DoAcquisition_config( bool silent);
  34
  35 /**
  36 * Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
  37 * if not already loaded, sets divisor and starts up the antenna.
  38 * @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
  39 *                                  0 or 95 ==> 125 KHz
  40 *
  41 **/
  42 void LFSetupFPGAForADC(int divisor, bool lf_field);
  43
  44
  45 /**
  46  * Called from the USB-handler to set the sampling configuration
  47  * The sampling config is used for std reading and snooping.
  48  *
  49  * Other functions may read samples and ignore the sampling config,
  50  * such as functions to read the UID from a prox tag or similar.
  51  *
  52  * Values set to '0' implies no change (except for averaging)
  53  * @brief setSamplingConfig
  54  * @param sc
  55  */
  56 void setSamplingConfig(sample_config *sc);
  57
  58 sample_config * getSamplingConfig();
  59 #endif // LFSAMPLING_H