cvs.zerfleddert.de Git - proxmark3-svn/blob - client/uart.c

   1 /*
   2  * Generic uart / rs232/ serial port library
   3  *
   4  * Copyright (c) 2013, Roel Verdult
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  * notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  * notice, this list of conditions and the following disclaimer in the
  13  * documentation and/or other materials provided with the distribution.
  14  * 3. Neither the name of the copyright holders nor the
  15  * names of its contributors may be used to endorse or promote products
  16  * derived from this software without specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  19  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  20  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  21  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
  22  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  23  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  24  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  25  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  26  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  27  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  28  *
  29  * @file uart.c
  30  * @brief
  31  *
  32  */
  33
  34 #include "uart.h"
  35
  36 // Test if we are dealing with unix operating systems
  37 #ifndef _WIN32
  38
  39 #include <termios.h>
  40 typedef struct termios term_info;
  41 typedef struct {
  42   int fd;           // Serial port file descriptor
  43   term_info tiOld;  // Terminal info before using the port
  44   term_info tiNew;  // Terminal info during the transaction
  45 } serial_port_unix;
  46
  47 // Set time-out on 30 miliseconds
  48 const struct timeval timeout = {
  49   .tv_sec  =     0, // 0 second
  50   .tv_usec = 30000  // 30000 micro seconds
  51 };
  52
  53 serial_port uart_open(const char* pcPortName)
  54 {
  55   serial_port_unix* sp = malloc(sizeof(serial_port_unix));
  56   if (sp == 0) return INVALID_SERIAL_PORT;
  57
  58   sp->fd = open(pcPortName, O_RDWR | O_NOCTTY | O_NDELAY | O_NONBLOCK);
  59   if(sp->fd == -1) {
  60     uart_close(sp);
  61     return INVALID_SERIAL_PORT;
  62   }
  63
  64   // Finally figured out a way to claim a serial port interface under unix
  65   // We just try to set a (advisory) lock on the file descriptor
  66   struct flock fl;
  67   fl.l_type   = F_WRLCK;
  68   fl.l_whence = SEEK_SET;
  69   fl.l_start  = 0;
  70   fl.l_len    = 0;
  71   fl.l_pid    = getpid();
  72
  73   // Does the system allows us to place a lock on this file descriptor
  74   if (fcntl(sp->fd, F_SETLK, &fl) == -1) {
  75     // A conflicting lock is held by another process
  76     free(sp);
  77     return CLAIMED_SERIAL_PORT;
  78   }
  79
  80   // Try to retrieve the old (current) terminal info struct
  81   if(tcgetattr(sp->fd,&sp->tiOld) == -1) {
  82     uart_close(sp);
  83     return INVALID_SERIAL_PORT;
  84   }
  85
  86   // Duplicate the (old) terminal info struct
  87   sp->tiNew = sp->tiOld;
  88
  89   // Configure the serial port
  90   sp->tiNew.c_cflag = CS8 | CLOCAL | CREAD;
  91   sp->tiNew.c_iflag = IGNPAR;
  92   sp->tiNew.c_oflag = 0;
  93   sp->tiNew.c_lflag = 0;
  94
  95   // Block until n bytes are received
  96   sp->tiNew.c_cc[VMIN] = 0;
  97   // Block until a timer expires (n * 100 mSec.)
  98   sp->tiNew.c_cc[VTIME] = 0;
  99
 100   // Try to set the new terminal info struct
 101   if(tcsetattr(sp->fd,TCSANOW,&sp->tiNew) == -1) {
 102     uart_close(sp);
 103     return INVALID_SERIAL_PORT;
 104   }
 105
 106   // Flush all lingering data that may exist
 107   tcflush(sp->fd, TCIOFLUSH);
 108
 109   return sp;
 110 }
 111
 112 void uart_close(const serial_port sp) {
 113   serial_port_unix* spu = (serial_port_unix*)sp;
 114   tcflush(spu->fd,TCIOFLUSH);
 115   tcsetattr(spu->fd,TCSANOW,&(spu->tiOld));
 116   struct flock fl;
 117   fl.l_type   = F_UNLCK;
 118   fl.l_whence = SEEK_SET;
 119   fl.l_start  = 0;
 120   fl.l_len    = 0;
 121   fl.l_pid    = getpid();
 122
 123   // Does the system allows us to place a lock on this file descriptor
 124   int err = fcntl(spu->fd, F_SETLK, &fl);
 125   if ( err == -1) {
 126      //perror("fcntl");
 127   }
 128   close(spu->fd);
 129   free(sp);
 130 }
 131
 132 bool uart_set_speed(serial_port sp, const uint32_t uiPortSpeed) {
 133   const serial_port_unix* spu = (serial_port_unix*)sp;
 134   speed_t stPortSpeed;
 135   switch (uiPortSpeed) {
 136     case 0: stPortSpeed = B0; break;
 137     case 50: stPortSpeed = B50; break;
 138     case 75: stPortSpeed = B75; break;
 139     case 110: stPortSpeed = B110; break;
 140     case 134: stPortSpeed = B134; break;
 141     case 150: stPortSpeed = B150; break;
 142     case 300: stPortSpeed = B300; break;
 143     case 600: stPortSpeed = B600; break;
 144     case 1200: stPortSpeed = B1200; break;
 145     case 1800: stPortSpeed = B1800; break;
 146     case 2400: stPortSpeed = B2400; break;
 147     case 4800: stPortSpeed = B4800; break;
 148     case 9600: stPortSpeed = B9600; break;
 149     case 19200: stPortSpeed = B19200; break;
 150     case 38400: stPortSpeed = B38400; break;
 151 #  ifdef B57600
 152     case 57600: stPortSpeed = B57600; break;
 153 #  endif
 154 #  ifdef B115200
 155     case 115200: stPortSpeed = B115200; break;
 156 #  endif
 157 #  ifdef B230400
 158     case 230400: stPortSpeed = B230400; break;
 159 #  endif
 160 #  ifdef B460800
 161     case 460800: stPortSpeed = B460800; break;
 162 #  endif
 163 #  ifdef B921600
 164     case 921600: stPortSpeed = B921600; break;
 165 #  endif
 166     default: return false;
 167   };
 168   struct termios ti;
 169   if (tcgetattr(spu->fd,&ti) == -1) return false;
 170   // Set port speed (Input and Output)
 171   cfsetispeed(&ti,stPortSpeed);
 172   cfsetospeed(&ti,stPortSpeed);
 173   return (tcsetattr(spu->fd,TCSANOW,&ti) != -1);
 174 }
 175
 176 uint32_t uart_get_speed(const serial_port sp) {
 177   struct termios ti;
 178   uint32_t uiPortSpeed;
 179   const serial_port_unix* spu = (serial_port_unix*)sp;
 180   if (tcgetattr(spu->fd,&ti) == -1) return 0;
 181   // Set port speed (Input)
 182   speed_t stPortSpeed = cfgetispeed(&ti);
 183   switch (stPortSpeed) {
 184     case B0: uiPortSpeed = 0; break;
 185     case B50: uiPortSpeed = 50; break;
 186     case B75: uiPortSpeed = 75; break;
 187     case B110: uiPortSpeed = 110; break;
 188     case B134: uiPortSpeed = 134; break;
 189     case B150: uiPortSpeed = 150; break;
 190     case B300: uiPortSpeed = 300; break;
 191     case B600: uiPortSpeed = 600; break;
 192     case B1200: uiPortSpeed = 1200; break;
 193     case B1800: uiPortSpeed = 1800; break;
 194     case B2400: uiPortSpeed = 2400; break;
 195     case B4800: uiPortSpeed = 4800; break;
 196     case B9600: uiPortSpeed = 9600; break;
 197     case B19200: uiPortSpeed = 19200; break;
 198     case B38400: uiPortSpeed = 38400; break;
 199 #  ifdef B57600
 200     case B57600: uiPortSpeed = 57600; break;
 201 #  endif
 202 #  ifdef B115200
 203     case B115200: uiPortSpeed = 115200; break;
 204 #  endif
 205 #  ifdef B230400
 206     case B230400: uiPortSpeed = 230400; break;
 207 #  endif
 208 #  ifdef B460800
 209     case B460800: uiPortSpeed = 460800; break;
 210 #  endif
 211 #  ifdef B921600
 212     case B921600: uiPortSpeed = 921600; break;
 213 #  endif
 214     default: return 0;
 215   };
 216   return uiPortSpeed;
 217 }
 218
 219 bool uart_set_parity(serial_port sp, serial_port_parity spp) {
 220   struct termios ti;
 221   const serial_port_unix* spu = (serial_port_unix*)sp;
 222   if (tcgetattr(spu->fd,&ti) == -1) return false;
 223   switch(spp) {
 224     case SP_INVALID: return false;
 225     case SP_NONE: ti.c_cflag &= ~(PARENB | PARODD); break;
 226     case SP_EVEN: ti.c_cflag |= PARENB; ti.c_cflag &= ~(PARODD); break;
 227     case SP_ODD: ti.c_cflag |= PARENB | PARODD; break;
 228   }
 229   return (tcsetattr(spu->fd,TCSANOW,&ti) != -1);
 230 }
 231
 232 serial_port_parity uart_get_parity(const serial_port sp) {
 233   struct termios ti;
 234   const serial_port_unix* spu = (serial_port_unix*)sp;
 235   if (tcgetattr(spu->fd,&ti) == -1) return SP_INVALID;
 236
 237   if (ti.c_cflag & PARENB) {
 238     if (ti.c_cflag & PARODD) {
 239       return SP_ODD;
 240     } else {
 241       return SP_EVEN;
 242     }
 243   } else {
 244     return SP_NONE;
 245   }
 246 }
 247
 248 bool uart_cts(const serial_port sp) {
 249   char status;
 250   if (ioctl(((serial_port_unix*)sp)->fd,TIOCMGET,&status) < 0) return false;
 251   return (status & TIOCM_CTS);
 252 }
 253
 254 bool uart_receive(const serial_port sp, byte_t* pbtRx, size_t* pszRxLen) {
 255
 256   int res;
 257   int byteCount;
 258   fd_set rfds;
 259   struct timeval tv;
 260
 261   // Reset the output count
 262   *pszRxLen = 0;
 263
 264   do {
 265     // Reset file descriptor
 266     FD_ZERO(&rfds);
 267     FD_SET(((serial_port_unix*)sp)->fd,&rfds);
 268     tv = timeout;
 269     res = select(((serial_port_unix*)sp)->fd+1, &rfds, NULL, NULL, &tv);
 270
 271     // Read error
 272     if (res < 0) {
 273       return false;
 274     }
 275
 276     // Read time-out
 277     if (res == 0) {
 278       if (*pszRxLen == 0) {
 279         // Error, we received no data
 280         return false;
 281       } else {
 282         // We received some data, but nothing more is available
 283         return true;
 284       }
 285     }
 286
 287     // Retrieve the count of the incoming bytes
 288     res = ioctl(((serial_port_unix*)sp)->fd, FIONREAD, &byteCount);
 289     if (res < 0) return false;
 290
 291     // There is something available, read the data
 292     res = read(((serial_port_unix*)sp)->fd,pbtRx+(*pszRxLen),byteCount);
 293
 294     // Stop if the OS has some troubles reading the data
 295     if (res <= 0) return false;
 296
 297     *pszRxLen += res;
 298
 299     if(res==byteCount)
 300         return true;
 301
 302   } while (byteCount);
 303
 304   return true;
 305 }
 306
 307 bool uart_send(const serial_port sp, const byte_t* pbtTx, const size_t szTxLen) {
 308   int32_t res;
 309   size_t szPos = 0;
 310   fd_set rfds;
 311   struct timeval tv;
 312
 313   while (szPos < szTxLen) {
 314     // Reset file descriptor
 315     FD_ZERO(&rfds);
 316     FD_SET(((serial_port_unix*)sp)->fd,&rfds);
 317     tv = timeout;
 318     res = select(((serial_port_unix*)sp)->fd+1, NULL, &rfds, NULL, &tv);
 319
 320     // Write error
 321     if (res < 0) {
 322       return false;
 323     }
 324
 325     // Write time-out
 326     if (res == 0) {
 327       return false;
 328     }
 329
 330     // Send away the bytes
 331     res = write(((serial_port_unix*)sp)->fd,pbtTx+szPos,szTxLen-szPos);
 332
 333     // Stop if the OS has some troubles sending the data
 334     if (res <= 0) return false;
 335
 336     szPos += res;
 337   }
 338   return true;
 339 }
 340
 341 #else
 342 // The windows serial port implementation
 343
 344 typedef struct {
 345   HANDLE hPort;     // Serial port handle
 346   DCB dcb;          // Device control settings
 347   COMMTIMEOUTS ct;  // Serial port time-out configuration
 348 } serial_port_windows;
 349
 350 void upcase(char *p) {
 351   while(*p != '\0') {
 352     if(*p >= 97 && *p <= 122) {
 353       *p -= 32;
 354     }
 355     ++p;
 356   }
 357 }
 358
 359 serial_port uart_open(const char* pcPortName) {
 360   char acPortName[255];
 361   serial_port_windows* sp = malloc(sizeof(serial_port_windows));
 362
 363   // Copy the input "com?" to "\\.\COM?" format
 364   sprintf(acPortName,"\\\\.\\%s",pcPortName);
 365   upcase(acPortName);
 366
 367   // Try to open the serial port
 368   sp->hPort = CreateFileA(acPortName,GENERIC_READ|GENERIC_WRITE,0,NULL,OPEN_EXISTING,0,NULL);
 369   if (sp->hPort == INVALID_HANDLE_VALUE) {
 370     uart_close(sp);
 371     return INVALID_SERIAL_PORT;
 372   }
 373
 374   // Prepare the device control
 375   memset(&sp->dcb, 0, sizeof(DCB));
 376   sp->dcb.DCBlength = sizeof(DCB);
 377   if(!BuildCommDCBA("baud=115200 parity=N data=8 stop=1",&sp->dcb)) {
 378                 uart_close(sp);
 379                 return INVALID_SERIAL_PORT;
 380         }
 381
 382   // Update the active serial port
 383   if(!SetCommState(sp->hPort,&sp->dcb)) {
 384     uart_close(sp);
 385     return INVALID_SERIAL_PORT;
 386   }
 387
 388   sp->ct.ReadIntervalTimeout         = 0;
 389   sp->ct.ReadTotalTimeoutMultiplier  = 0;
 390   sp->ct.ReadTotalTimeoutConstant    = 30;
 391   sp->ct.WriteTotalTimeoutMultiplier = 0;
 392   sp->ct.WriteTotalTimeoutConstant   = 30;
 393
 394   if(!SetCommTimeouts(sp->hPort,&sp->ct)) {
 395     uart_close(sp);
 396     return INVALID_SERIAL_PORT;
 397   }
 398
 399   PurgeComm(sp->hPort, PURGE_RXABORT | PURGE_RXCLEAR);
 400
 401   return sp;
 402 }
 403
 404 void uart_close(const serial_port sp) {
 405   CloseHandle(((serial_port_windows*)sp)->hPort);
 406   free(sp);
 407 }
 408
 409 bool uart_set_speed(serial_port sp, const uint32_t uiPortSpeed) {
 410   serial_port_windows* spw;
 411   spw = (serial_port_windows*)sp;
 412   spw->dcb.BaudRate = uiPortSpeed;
 413   return SetCommState(spw->hPort, &spw->dcb);
 414 }
 415
 416 uint32_t uart_get_speed(const serial_port sp) {
 417   const serial_port_windows* spw = (serial_port_windows*)sp;
 418   if (!GetCommState(spw->hPort, (serial_port)&spw->dcb)) {
 419     return spw->dcb.BaudRate;
 420   }
 421   return 0;
 422 }
 423
 424 bool uart_receive(const serial_port sp, byte_t* pbtRx, size_t* pszRxLen) {
 425   ReadFile(((serial_port_windows*)sp)->hPort,pbtRx,*pszRxLen,(LPDWORD)pszRxLen,NULL);
 426   return (*pszRxLen != 0);
 427 }
 428
 429 bool uart_send(const serial_port sp, const byte_t* pbtTx, const size_t szTxLen) {
 430   DWORD dwTxLen = 0;
 431   return WriteFile(((serial_port_windows*)sp)->hPort,pbtTx,szTxLen,&dwTxLen,NULL);
 432   return (dwTxLen != 0);
 433 }
 434
 435 #endif