cvs.zerfleddert.de Git - proxmark3-svn/blob - tools/at91sam7s512-buspirate.cfg

   1 # Ports
   2 telnet_port 4444
   3 gdb_port 3333
   4
   5 # Interface
   6 interface buspirate
   7 buspirate_port /dev/ttyUSB0
   8 adapter_khz 1000
   9
  10 # Communication speed
  11 buspirate_speed normal # or fast
  12
  13 # Voltage regulator: enabled = 1 or disabled = 0
  14 buspirate_vreg 1
  15
  16 # Pin mode: normal or open-drain
  17 buspirate_mode normal
  18
  19 # Pull-up state: enabled = 1 or disabled = 0
  20 buspirate_pullup 1
  21
  22 # use combined on interfaces or targets that can't set TRST/SRST separately
  23 reset_config srst_only srst_pulls_trst
  24
  25 jtag newtap sam7x cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
  26
  27 target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu
  28
  29 sam7x.cpu configure -event reset-init {
  30     soft_reset_halt
  31     mww 0xfffffd00 0xa5000004   # RSTC_CR: Reset peripherals
  32     mww 0xfffffd44 0x00008000   # WDT_MR: disable watchdog
  33     mww 0xfffffd08 0xa5000001   # RSTC_MR enable user reset
  34     mww 0xfffffc20 0x00005001   # CKGR_MOR : enable the main oscillator
  35     sleep 10
  36     mww 0xfffffc2c 0x000b1c02   # CKGR_PLLR: 16MHz * 12/2 = 96MHz
  37     sleep 10
  38     mww 0xfffffc30 0x00000007   # PMC_MCKR : MCK = PLL / 2 = 48 MHz
  39     sleep 10
  40     mww 0xffffff60 0x00480100   # MC_FMR: flash mode (FWS=1,FMCN=72)
  41     sleep 100
  42
  43 }
  44
  45 gdb_memory_map enable
  46 #gdb_breakpoint_override hard
  47 #armv4_5 core_state arm
  48
  49 sam7x.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
  50 flash bank sam7x512.flash.0 at91sam7 0 0 0 0 sam7x.cpu 0 0 0 0 0 0 0 18432
  51 flash bank sam7x512.flash.1 at91sam7 0 0 0 0 sam7x.cpu 1 0 0 0 0 0 0 18432
  52