1 #include "mifaredesfire.h"
4 #define MAX_APPLICATION_COUNT 28
5 #define MAX_FILE_COUNT 16
6 #define MAX_DESFIRE_FRAME_SIZE 60
7 #define NOT_YET_AUTHENTICATED 255
8 #define FRAME_PAYLOAD_SIZE (MAX_DESFIRE_FRAME_SIZE - 5)
9 #define RECEIVE_SIZE 64
11 // the block number for the ISO14443-4 PCB
12 uint8_t pcb_blocknum
= 0;
13 // Deselect card by sending a s-block. the crc is precalced for speed
14 static uint8_t deselect_cmd
[] = {0xc2,0xe0,0xb4};
16 //static uint8_t __msg[MAX_FRAME_SIZE] = { 0x0A, 0x00, 0x00, /* ..., */ 0x00 };
17 /* PCB CID CMD PAYLOAD */
18 //static uint8_t __res[MAX_FRAME_SIZE];
20 bool InitDesfireCard(){
22 iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN
);
25 byte_t cardbuf
[USB_CMD_DATA_SIZE
] = {0x00};
26 iso14a_card_select_t
*card
= (iso14a_card_select_t
*)cardbuf
;
28 int len
= iso14443a_select_card(NULL
,card
,NULL
,true,0);
31 if (MF_DBGLEVEL
>= MF_DBG_ERROR
)
32 Dbprintf("Can't select card");
48 void MifareSendCommand(uint8_t arg0
, uint8_t arg1
, uint8_t *datain
){
50 /* ARG0 contains flags.
56 size_t datalen
= arg1
;
57 uint8_t resp
[RECEIVE_SIZE
];
58 memset(resp
,0,sizeof(resp
));
60 if (MF_DBGLEVEL
>= 4) {
61 Dbprintf(" flags : %02X", flags
);
62 Dbprintf(" len : %02X", datalen
);
63 print_result(" RX : ", datain
, datalen
);
66 if ( flags
& CLEARTRACE
)
70 if ( !InitDesfireCard() )
74 int len
= DesfireAPDU(datain
, datalen
, resp
);
76 print_result("ERR <--: ", resp
, len
);
83 // reset the pcb_blocknum,
86 if ( flags
& DISCONNECT
)
89 cmd_send(CMD_ACK
,1,len
,0,resp
,len
);
92 void MifareDesfireGetInformation(){
95 uint8_t resp
[USB_CMD_DATA_SIZE
] = {0x00};
96 uint8_t dataout
[USB_CMD_DATA_SIZE
] = {0x00};
97 byte_t cardbuf
[USB_CMD_DATA_SIZE
] = {0x00};
102 3 = desfire command 3
105 PCB == 0x0A because sending CID byte.
106 CID == 0x00 first card?
110 iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN
);
112 // card select - information
113 iso14a_card_select_t
*card
= (iso14a_card_select_t
*)cardbuf
;
114 byte_t isOK
= iso14443a_select_card(NULL
, card
, NULL
, true, 0);
116 if (MF_DBGLEVEL
>= MF_DBG_ERROR
) {
117 Dbprintf("Can't select card");
123 memcpy(dataout
,card
->uid
,7);
129 uint8_t cmd
[] = {GET_VERSION
};
130 size_t cmd_len
= sizeof(cmd
);
132 len
= DesfireAPDU(cmd
, cmd_len
, resp
);
134 print_result("ERROR <--: ", resp
, len
);
141 memcpy(dataout
+7,resp
+3,7);
144 cmd
[0] = ADDITIONAL_FRAME
;
145 len
= DesfireAPDU(cmd
, cmd_len
, resp
);
147 print_result("ERROR <--: ", resp
, len
);
154 memcpy(dataout
+7+7,resp
+3,7);
157 len
= DesfireAPDU(cmd
, cmd_len
, resp
);
159 print_result("ERROR <--: ", resp
, len
);
164 memcpy(dataout
+7+7+7,resp
+3,14);
166 cmd_send(CMD_ACK
,1,0,0,dataout
,sizeof(dataout
));
168 // reset the pcb_blocknum,
173 void MifareDES_Auth1(uint8_t mode
, uint8_t algo
, uint8_t keyno
, uint8_t *datain
){
176 //uint8_t PICC_MASTER_KEY8[8] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47};
177 uint8_t PICC_MASTER_KEY16
[16] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f };
178 uint8_t null_key_data8
[8] = {0x00};
179 //uint8_t null_key_data16[16] = {0x00};
180 //uint8_t new_key_data8[8] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77};
181 //uint8_t new_key_data16[16] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF};
183 uint8_t resp
[256] = {0x00};
184 uint8_t IV
[16] = {0x00};
186 size_t datalen
= datain
[0];
188 uint8_t cmd
[40] = {0x00};
189 uint8_t encRndB
[16] = {0x00};
190 uint8_t decRndB
[16] = {0x00};
191 uint8_t nonce
[16] = {0x00};
192 uint8_t both
[32] = {0x00};
193 uint8_t encBoth
[32] = {0x00};
201 // 3 olika sätt att authenticera. AUTH (CRC16) , AUTH_ISO (CRC32) , AUTH_AES (CRC32)
202 // 4 olika crypto algo DES, 3DES, 3K3DES, AES
203 // 3 olika kommunikations sätt, PLAIN,MAC,CRYPTO
208 uint8_t keybytes
[16];
209 uint8_t RndA
[8] = {0x00};
210 uint8_t RndB
[8] = {0x00};
213 if (datain
[1] == 0xff){
214 memcpy(keybytes
,PICC_MASTER_KEY16
,16);
216 memcpy(keybytes
, datain
+1, datalen
);
220 if (datain
[1] == 0xff){
221 memcpy(keybytes
,null_key_data8
,8);
223 memcpy(keybytes
, datain
+1, datalen
);
228 struct desfire_key defaultkey
= {0};
229 desfirekey_t key
= &defaultkey
;
232 Desfire_3des_key_new_with_version(keybytes
, key
);
234 Desfire_des_key_new(keybytes
, key
);
236 cmd
[0] = AUTHENTICATE
;
237 cmd
[1] = keyno
; //keynumber
238 len
= DesfireAPDU(cmd
, 2, resp
);
240 if (MF_DBGLEVEL
>= MF_DBG_ERROR
) {
241 DbpString("Authentication failed. Card timeout.");
247 if ( resp
[2] == 0xaf ){
249 DbpString("Authetication failed. Invalid key number.");
254 memcpy( encRndB
, resp
+3, 8);
256 tdes_dec(&decRndB
, &encRndB
, key
->data
);
258 des_dec(&decRndB
, &encRndB
, key
->data
);
260 memcpy(RndB
, decRndB
, 8);
263 // This should be random
264 uint8_t decRndA
[8] = {0x00};
265 memcpy(RndA
, decRndA
, 8);
266 uint8_t encRndA
[8] = {0x00};
269 tdes_dec(&encRndA
, &decRndA
, key
->data
);
271 des_dec(&encRndA
, &decRndA
, key
->data
);
273 memcpy(both
, encRndA
, 8);
275 for (int x
= 0; x
< 8; x
++) {
276 decRndB
[x
] = decRndB
[x
] ^ encRndA
[x
];
281 tdes_dec(&encRndB
, &decRndB
, key
->data
);
283 des_dec(&encRndB
, &decRndB
, key
->data
);
285 memcpy(both
+ 8, encRndB
, 8);
287 cmd
[0] = ADDITIONAL_FRAME
;
288 memcpy(cmd
+1, both
, 16 );
290 len
= DesfireAPDU(cmd
, 17, resp
);
292 if (MF_DBGLEVEL
>= MF_DBG_ERROR
) {
293 DbpString("Authentication failed. Card timeout.");
299 if ( resp
[2] == 0x00 ){
301 struct desfire_key sessionKey
= {0};
302 desfirekey_t skey
= &sessionKey
;
303 Desfire_session_key_new( RndA
, RndB
, key
, skey
);
304 //print_result("SESSION : ", skey->data, 8);
306 memcpy(encRndA
, resp
+3, 8);
309 tdes_dec(&encRndA
, &encRndA
, key
->data
);
311 des_dec(&encRndA
, &encRndA
, key
->data
);
314 for (int x
= 0; x
< 8; x
++) {
315 if (decRndA
[x
] != encRndA
[x
]) {
316 DbpString("Authetication failed. Cannot varify PICC.");
322 //Change the selected key to a new value.
325 // Current key is a 3DES key, change it to a DES key
330 uint8_t newKey[16] = {0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77};
332 uint8_t first, second;
333 uint8_t buff1[8] = {0x00};
334 uint8_t buff2[8] = {0x00};
335 uint8_t buff3[8] = {0x00};
337 memcpy(buff1,newKey, 8);
338 memcpy(buff2,newKey + 8, 8);
340 ComputeCrc14443(CRC_14443_A, newKey, 16, &first, &second);
341 memcpy(buff3, &first, 1);
342 memcpy(buff3 + 1, &second, 1);
344 tdes_dec(&buff1, &buff1, skey->data);
345 memcpy(cmd+2,buff1,8);
347 for (int x = 0; x < 8; x++) {
348 buff2[x] = buff2[x] ^ buff1[x];
350 tdes_dec(&buff2, &buff2, skey->data);
351 memcpy(cmd+10,buff2,8);
353 for (int x = 0; x < 8; x++) {
354 buff3[x] = buff3[x] ^ buff2[x];
356 tdes_dec(&buff3, &buff3, skey->data);
357 memcpy(cmd+18,buff3,8);
359 // The command always times out on the first attempt, this will retry until a response
363 len = DesfireAPDU(cmd,26,resp);
367 // Current key is a DES key, change it to a 3DES key
372 uint8_t newKey[16] = {0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f};
374 uint8_t first, second;
375 uint8_t buff1[8] = {0x00};
376 uint8_t buff2[8] = {0x00};
377 uint8_t buff3[8] = {0x00};
379 memcpy(buff1,newKey, 8);
380 memcpy(buff2,newKey + 8, 8);
382 ComputeCrc14443(CRC_14443_A, newKey, 16, &first, &second);
383 memcpy(buff3, &first, 1);
384 memcpy(buff3 + 1, &second, 1);
386 des_dec(&buff1, &buff1, skey->data);
387 memcpy(cmd+2,buff1,8);
389 for (int x = 0; x < 8; x++) {
390 buff2[x] = buff2[x] ^ buff1[x];
392 des_dec(&buff2, &buff2, skey->data);
393 memcpy(cmd+10,buff2,8);
395 for (int x = 0; x < 8; x++) {
396 buff3[x] = buff3[x] ^ buff2[x];
398 des_dec(&buff3, &buff3, skey->data);
399 memcpy(cmd+18,buff3,8);
401 // The command always times out on the first attempt, this will retry until a response
405 len = DesfireAPDU(cmd,26,resp);
413 cmd_send(CMD_ACK
,1,0,0,skey
->data
,16);
415 cmd_send(CMD_ACK
,1,0,0,skey
->data
,8);
417 DbpString("Authetication failed.");
424 //SendDesfireCommand(AUTHENTICATE_ISO, &keyno, resp);
429 uint8_t keybytes
[16] = {0x00};
430 if (datain
[1] == 0xff){
431 memcpy(keybytes
,PICC_MASTER_KEY16
,16);
433 memcpy(keybytes
, datain
+1, datalen
);
436 struct desfire_key defaultkey
= {0x00};
437 desfirekey_t key
= &defaultkey
;
438 Desfire_aes_key_new( keybytes
, key
);
441 if ( AesCtxIni(&ctx
, IV
, key
->data
, KEY128
, CBC
) < 0 ){
442 if( MF_DBGLEVEL
>= 4) {
443 Dbprintf("AES context failed to init");
449 cmd
[0] = AUTHENTICATE_AES
;
450 cmd
[1] = 0x00; //keynumber
451 len
= DesfireAPDU(cmd
, 2, resp
);
453 if (MF_DBGLEVEL
>= MF_DBG_ERROR
) {
454 DbpString("Authentication failed. Card timeout.");
460 memcpy( encRndB
, resp
+3, 16);
462 // dekryptera tagnonce.
463 AesDecrypt(&ctx
, encRndB
, decRndB
, 16);
465 memcpy(both
, nonce
,16);
466 memcpy(both
+16, decRndB
,16 );
467 AesEncrypt(&ctx
, both
, encBoth
, 32 );
469 cmd
[0] = ADDITIONAL_FRAME
;
470 memcpy(cmd
+1, encBoth
, 32 );
472 len
= DesfireAPDU(cmd
, 33, resp
); // 1 + 32 == 33
474 if (MF_DBGLEVEL
>= MF_DBG_ERROR
) {
475 DbpString("Authentication failed. Card timeout.");
481 if ( resp
[2] == 0x00 ){
482 // Create AES Session key
483 struct desfire_key sessionKey
= {0};
484 desfirekey_t skey
= &sessionKey
;
485 Desfire_session_key_new( nonce
, decRndB
, key
, skey
);
486 print_result("SESSION : ", skey
->data
, 16);
488 DbpString("Authetication failed.");
498 cmd_send(CMD_ACK
,1,len
,0,resp
,len
);
501 // 3 olika ISO sätt att skicka data till DESFIRE (direkt, inkapslat, inkapslat ISO)
502 // cmd = cmd bytes to send
503 // cmd_len = length of cmd
504 // dataout = pointer to response data array
505 int DesfireAPDU(uint8_t *cmd
, size_t cmd_len
, uint8_t *dataout
){
508 size_t wrappedLen
= 0;
509 uint8_t wCmd
[USB_CMD_DATA_SIZE
] = {0x00};
511 uint8_t resp
[MAX_FRAME_SIZE
];
512 uint8_t par
[MAX_PARITY_SIZE
];
514 wrappedLen
= CreateAPDU( cmd
, cmd_len
, wCmd
);
516 if (MF_DBGLEVEL
>= 4) {
517 print_result("WCMD <--: ", wCmd
, wrappedLen
);
519 ReaderTransmit( wCmd
, wrappedLen
, NULL
);
521 len
= ReaderReceive(resp
, par
);
524 if (MF_DBGLEVEL
>= 4) Dbprintf("fukked");
525 return FALSE
; //DATA LINK ERROR
527 // if we received an I- or R(ACK)-Block with a block number equal to the
528 // current block number, toggle the current block number
529 else if (len
>= 4 // PCB+CID+CRC = 4 bytes
530 && ((resp
[0] & 0xC0) == 0 // I-Block
531 || (resp
[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
532 && (resp
[0] & 0x01) == pcb_blocknum
) // equal block numbers
534 pcb_blocknum
^= 1; //toggle next block
537 memcpy(dataout
, resp
, len
);
542 size_t CreateAPDU( uint8_t *datain
, size_t len
, uint8_t *dataout
){
544 size_t cmdlen
= MIN(len
+4, USB_CMD_DATA_SIZE
-1);
547 memset(cmd
, 0, cmdlen
);
549 cmd
[0] = 0x0A; // 0x0A = skicka cid, 0x02 = ingen cid. Särskilda bitar //
550 cmd
[0] |= pcb_blocknum
; // OR the block number into the PCB
551 cmd
[1] = 0x00; // CID: 0x00 //TODO: allow multiple selected cards
553 memcpy(cmd
+2, datain
, len
);
554 AppendCrc14443a(cmd
, len
+2);
556 memcpy(dataout
, cmd
, cmdlen
);
561 // crc_update(&desfire_crc32, 0, 1); /* CMD_WRITE */
562 // crc_update(&desfire_crc32, addr, addr_sz);
563 // crc_update(&desfire_crc32, byte, 8);
564 // uint32_t crc = crc_finish(&desfire_crc32);
568 ReaderTransmit(deselect_cmd
, 3 , NULL
);
569 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF
);
574 void OnError(uint8_t reason
){
575 cmd_send(CMD_ACK
,0,reason
,0,0,0);