cvs.zerfleddert.de Git - proxmark3-svn/blob - common/polarssl/rsa.h

   1 /**
   2  * \file rsa.h
   3  *
   4  * \brief The RSA public-key cryptosystem
   5  *
   6  *  Copyright (C) 2006-2010, Brainspark B.V.
   7  *
   8  *  This file is part of PolarSSL (http://www.polarssl.org)
   9  *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
  10  *
  11  *  All rights reserved.
  12  *
  13  *  This program is free software; you can redistribute it and/or modify
  14  *  it under the terms of the GNU General Public License as published by
  15  *  the Free Software Foundation; either version 2 of the License, or
  16  *  (at your option) any later version.
  17  *
  18  *  This program is distributed in the hope that it will be useful,
  19  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *  GNU General Public License for more details.
  22  *
  23  *  You should have received a copy of the GNU General Public License along
  24  *  with this program; if not, write to the Free Software Foundation, Inc.,
  25  *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  26  */
  27 #ifndef POLARSSL_RSA_H
  28 #define POLARSSL_RSA_H
  29
  30 #include "bignum.h"
  31
  32 /*
  33  * RSA Error codes
  34  */
  35 #define POLARSSL_ERR_RSA_BAD_INPUT_DATA                    -0x4080  /**< Bad input parameters to function. */
  36 #define POLARSSL_ERR_RSA_INVALID_PADDING                   -0x4100  /**< Input data contains invalid padding and is rejected. */
  37 #define POLARSSL_ERR_RSA_KEY_GEN_FAILED                    -0x4180  /**< Something failed during generation of a key. */
  38 #define POLARSSL_ERR_RSA_KEY_CHECK_FAILED                  -0x4200  /**< Key failed to pass the libraries validity check. */
  39 #define POLARSSL_ERR_RSA_PUBLIC_FAILED                     -0x4280  /**< The public key operation failed. */
  40 #define POLARSSL_ERR_RSA_PRIVATE_FAILED                    -0x4300  /**< The private key operation failed. */
  41 #define POLARSSL_ERR_RSA_VERIFY_FAILED                     -0x4380  /**< The PKCS#1 verification failed. */
  42 #define POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE                  -0x4400  /**< The output buffer for decryption is not large enough. */
  43 #define POLARSSL_ERR_RSA_RNG_FAILED                        -0x4480  /**< The random generator failed to generate non-zeros. */
  44
  45 /*
  46  * PKCS#1 constants
  47  */
  48 #define SIG_RSA_RAW     0
  49 #define SIG_RSA_MD2     2
  50 #define SIG_RSA_MD4     3
  51 #define SIG_RSA_MD5     4
  52 #define SIG_RSA_SHA1    5
  53 #define SIG_RSA_SHA224 14
  54 #define SIG_RSA_SHA256 11
  55 #define SIG_RSA_SHA384 12
  56 #define SIG_RSA_SHA512 13
  57
  58 #define RSA_PUBLIC      0
  59 #define RSA_PRIVATE     1
  60
  61 #define RSA_PKCS_V15    0
  62 #define RSA_PKCS_V21    1
  63
  64 #define RSA_SIGN        1
  65 #define RSA_CRYPT       2
  66
  67 #define ASN1_STR_CONSTRUCTED_SEQUENCE   "\x30"
  68 #define ASN1_STR_NULL                   "\x05"
  69 #define ASN1_STR_OID                    "\x06"
  70 #define ASN1_STR_OCTET_STRING           "\x04"
  71
  72 #define OID_DIGEST_ALG_MDX              "\x2A\x86\x48\x86\xF7\x0D\x02\x00"
  73 #define OID_HASH_ALG_SHA1               "\x2b\x0e\x03\x02\x1a"
  74 #define OID_HASH_ALG_SHA2X              "\x60\x86\x48\x01\x65\x03\x04\x02\x00"
  75
  76 #define OID_ISO_MEMBER_BODIES           "\x2a"
  77 #define OID_ISO_IDENTIFIED_ORG          "\x2b"
  78
  79 /*
  80  * ISO Member bodies OID parts
  81  */
  82 #define OID_COUNTRY_US                  "\x86\x48"
  83 #define OID_RSA_DATA_SECURITY           "\x86\xf7\x0d"
  84
  85 /*
  86  * ISO Identified organization OID parts
  87  */
  88 #define OID_OIW_SECSIG_SHA1             "\x0e\x03\x02\x1a"
  89
  90 /*
  91  * DigestInfo ::= SEQUENCE {
  92  *   digestAlgorithm DigestAlgorithmIdentifier,
  93  *   digest Digest }
  94  *
  95  * DigestAlgorithmIdentifier ::= AlgorithmIdentifier
  96  *
  97  * Digest ::= OCTET STRING
  98  */
  99 #define ASN1_HASH_MDX                           \
 100 (                                               \
 101     ASN1_STR_CONSTRUCTED_SEQUENCE "\x20"        \
 102       ASN1_STR_CONSTRUCTED_SEQUENCE "\x0C"      \
 103         ASN1_STR_OID "\x08"                     \
 104       OID_DIGEST_ALG_MDX                        \
 105     ASN1_STR_NULL "\x00"                        \
 106       ASN1_STR_OCTET_STRING "\x10"              \
 107 )
 108
 109 #define ASN1_HASH_SHA1                          \
 110     ASN1_STR_CONSTRUCTED_SEQUENCE "\x21"        \
 111       ASN1_STR_CONSTRUCTED_SEQUENCE "\x09"      \
 112         ASN1_STR_OID "\x05"                     \
 113       OID_HASH_ALG_SHA1                         \
 114         ASN1_STR_NULL "\x00"                    \
 115       ASN1_STR_OCTET_STRING "\x14"
 116
 117 #define ASN1_HASH_SHA1_ALT                      \
 118     ASN1_STR_CONSTRUCTED_SEQUENCE "\x1F"        \
 119       ASN1_STR_CONSTRUCTED_SEQUENCE "\x07"      \
 120         ASN1_STR_OID "\x05"                     \
 121       OID_HASH_ALG_SHA1                         \
 122       ASN1_STR_OCTET_STRING "\x14"
 123
 124 #define ASN1_HASH_SHA2X                         \
 125     ASN1_STR_CONSTRUCTED_SEQUENCE "\x11"        \
 126       ASN1_STR_CONSTRUCTED_SEQUENCE "\x0d"      \
 127         ASN1_STR_OID "\x09"                     \
 128       OID_HASH_ALG_SHA2X                        \
 129         ASN1_STR_NULL "\x00"                    \
 130       ASN1_STR_OCTET_STRING "\x00"
 131
 132 /**
 133  * \brief          RSA context structure
 134  */
 135 typedef struct
 136 {
 137     int ver;                    /*!<  always 0          */
 138     size_t len;                 /*!<  size(N) in chars  */
 139
 140     mpi N;                      /*!<  public modulus    */
 141     mpi E;                      /*!<  public exponent   */
 142
 143     mpi D;                      /*!<  private exponent  */
 144     mpi P;                      /*!<  1st prime factor  */
 145     mpi Q;                      /*!<  2nd prime factor  */
 146     mpi DP;                     /*!<  D % (P - 1)       */
 147     mpi DQ;                     /*!<  D % (Q - 1)       */
 148     mpi QP;                     /*!<  1 / (Q % P)       */
 149
 150     mpi RN;                     /*!<  cached R^2 mod N  */
 151     mpi RP;                     /*!<  cached R^2 mod P  */
 152     mpi RQ;                     /*!<  cached R^2 mod Q  */
 153
 154     int padding;                /*!<  RSA_PKCS_V15 for 1.5 padding and
 155                                       RSA_PKCS_v21 for OAEP/PSS         */
 156     int hash_id;                /*!<  Hash identifier of md_type_t as
 157                                       specified in the md.h header file
 158                                       for the EME-OAEP and EMSA-PSS
 159                                       encoding                          */
 160 }
 161 rsa_context;
 162
 163 #ifdef __cplusplus
 164 extern "C" {
 165 #endif
 166
 167 /**
 168  * \brief          Initialize an RSA context
 169  *
 170  *                 Note: Set padding to RSA_PKCS_V21 for the RSAES-OAEP
 171  *                 encryption scheme and the RSASSA-PSS signature scheme.
 172  *
 173  * \param ctx      RSA context to be initialized
 174  * \param padding  RSA_PKCS_V15 or RSA_PKCS_V21
 175  * \param hash_id  RSA_PKCS_V21 hash identifier
 176  *
 177  * \note           The hash_id parameter is actually ignored
 178  *                 when using RSA_PKCS_V15 padding.
 179  */
 180 void rsa_init( rsa_context *ctx,
 181                int padding,
 182                int hash_id);
 183
 184 /**
 185  * \brief          Generate an RSA keypair
 186  *
 187  * \param ctx      RSA context that will hold the key
 188  * \param f_rng    RNG function
 189  * \param p_rng    RNG parameter
 190  * \param nbits    size of the public key in bits
 191  * \param exponent public exponent (e.g., 65537)
 192  *
 193  * \note           rsa_init() must be called beforehand to setup
 194  *                 the RSA context.
 195  *
 196  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 197  */
 198 int rsa_gen_key( rsa_context *ctx,
 199                  int (*f_rng)(void *, unsigned char *, size_t),
 200                  void *p_rng,
 201                  unsigned int nbits, int exponent );
 202
 203 /**
 204  * \brief          Check a public RSA key
 205  *
 206  * \param ctx      RSA context to be checked
 207  *
 208  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 209  */
 210 int rsa_check_pubkey( const rsa_context *ctx );
 211
 212 /**
 213  * \brief          Check a private RSA key
 214  *
 215  * \param ctx      RSA context to be checked
 216  *
 217  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 218  */
 219 int rsa_check_privkey( const rsa_context *ctx );
 220
 221 /**
 222  * \brief          Do an RSA public key operation
 223  *
 224  * \param ctx      RSA context
 225  * \param input    input buffer
 226  * \param output   output buffer
 227  *
 228  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 229  *
 230  * \note           This function does NOT take care of message
 231  *                 padding. Also, be sure to set input[0] = 0 or assure that
 232  *                 input is smaller than N.
 233  *
 234  * \note           The input and output buffers must be large
 235  *                 enough (eg. 128 bytes if RSA-1024 is used).
 236  */
 237 int rsa_public( rsa_context *ctx,
 238                 const unsigned char *input,
 239                 unsigned char *output );
 240
 241 /**
 242  * \brief          Do an RSA private key operation
 243  *
 244  * \param ctx      RSA context
 245  * \param input    input buffer
 246  * \param output   output buffer
 247  *
 248  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 249  *
 250  * \note           The input and output buffers must be large
 251  *                 enough (eg. 128 bytes if RSA-1024 is used).
 252  */
 253 int rsa_private( rsa_context *ctx,
 254                  const unsigned char *input,
 255                  unsigned char *output );
 256
 257 /**
 258  * \brief          Generic wrapper to perform a PKCS#1 encryption using the
 259  *                 mode from the context. Add the message padding, then do an
 260  *                 RSA operation.
 261  *
 262  * \param ctx      RSA context
 263  * \param f_rng    RNG function (Needed for padding and PKCS#1 v2.1 encoding)
 264  * \param p_rng    RNG parameter
 265  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 266  * \param ilen     contains the plaintext length
 267  * \param input    buffer holding the data to be encrypted
 268  * \param output   buffer that will hold the ciphertext
 269  *
 270  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 271  *
 272  * \note           The output buffer must be as large as the size
 273  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 274  */
 275 int rsa_pkcs1_encrypt( rsa_context *ctx,
 276                        int (*f_rng)(void *, unsigned char *, size_t),
 277                        void *p_rng,
 278                        int mode, size_t ilen,
 279                        const unsigned char *input,
 280                        unsigned char *output );
 281
 282 /**
 283  * \brief          Perform a PKCS#1 v1.5 encryption (RSAES-PKCS1-v1_5-ENCRYPT)
 284  *
 285  * \param ctx      RSA context
 286  * \param f_rng    RNG function (Needed for padding)
 287  * \param p_rng    RNG parameter
 288  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 289  * \param ilen     contains the plaintext length
 290  * \param input    buffer holding the data to be encrypted
 291  * \param output   buffer that will hold the ciphertext
 292  *
 293  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 294  *
 295  * \note           The output buffer must be as large as the size
 296  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 297  */
 298 int rsa_rsaes_pkcs1_v15_encrypt( rsa_context *ctx,
 299                                  int (*f_rng)(void *, unsigned char *, size_t),
 300                                  void *p_rng,
 301                                  int mode, size_t ilen,
 302                                  const unsigned char *input,
 303                                  unsigned char *output );
 304
 305 /**
 306  * \brief          Perform a PKCS#1 v2.1 OAEP encryption (RSAES-OAEP-ENCRYPT)
 307  *
 308  * \param ctx      RSA context
 309  * \param f_rng    RNG function (Needed for padding and PKCS#1 v2.1 encoding)
 310  * \param p_rng    RNG parameter
 311  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 312  * \param label    buffer holding the custom label to use
 313  * \param label_len contains the label length
 314  * \param ilen     contains the plaintext length
 315  * \param input    buffer holding the data to be encrypted
 316  * \param output   buffer that will hold the ciphertext
 317  *
 318  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 319  *
 320  * \note           The output buffer must be as large as the size
 321  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 322  */
 323 int rsa_rsaes_oaep_encrypt( rsa_context *ctx,
 324                             int (*f_rng)(void *, unsigned char *, size_t),
 325                             void *p_rng,
 326                             int mode,
 327                             const unsigned char *label, size_t label_len,
 328                             size_t ilen,
 329                             const unsigned char *input,
 330                             unsigned char *output );
 331
 332 /**
 333  * \brief          Generic wrapper to perform a PKCS#1 decryption using the
 334  *                 mode from the context. Do an RSA operation, then remove
 335  *                 the message padding
 336  *
 337  * \param ctx      RSA context
 338  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 339  * \param olen     will contain the plaintext length
 340  * \param input    buffer holding the encrypted data
 341  * \param output   buffer that will hold the plaintext
 342  * \param output_max_len    maximum length of the output buffer
 343  *
 344  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 345  *
 346  * \note           The output buffer must be as large as the size
 347  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
 348  *                 an error is thrown.
 349  */
 350 int rsa_pkcs1_decrypt( rsa_context *ctx,
 351                        int mode, size_t *olen,
 352                        const unsigned char *input,
 353                        unsigned char *output,
 354                        size_t output_max_len );
 355
 356 /**
 357  * \brief          Perform a PKCS#1 v1.5 decryption (RSAES-PKCS1-v1_5-DECRYPT)
 358  *
 359  * \param ctx      RSA context
 360  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 361  * \param olen     will contain the plaintext length
 362  * \param input    buffer holding the encrypted data
 363  * \param output   buffer that will hold the plaintext
 364  * \param output_max_len    maximum length of the output buffer
 365  *
 366  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 367  *
 368  * \note           The output buffer must be as large as the size
 369  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
 370  *                 an error is thrown.
 371  */
 372 int rsa_rsaes_pkcs1_v15_decrypt( rsa_context *ctx,
 373                                  int mode, size_t *olen,
 374                                  const unsigned char *input,
 375                                  unsigned char *output,
 376                                  size_t output_max_len );
 377
 378 /**
 379  * \brief          Perform a PKCS#1 v2.1 OAEP decryption (RSAES-OAEP-DECRYPT)
 380  *
 381  * \param ctx      RSA context
 382  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 383  * \param label    buffer holding the custom label to use
 384  * \param label_len contains the label length
 385  * \param olen     will contain the plaintext length
 386  * \param input    buffer holding the encrypted data
 387  * \param output   buffer that will hold the plaintext
 388  * \param output_max_len    maximum length of the output buffer
 389  *
 390  * \return         0 if successful, or an POLARSSL_ERR_RSA_XXX error code
 391  *
 392  * \note           The output buffer must be as large as the size
 393  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
 394  *                 an error is thrown.
 395  */
 396 int rsa_rsaes_oaep_decrypt( rsa_context *ctx,
 397                             int mode,
 398                             const unsigned char *label, size_t label_len,
 399                             size_t *olen,
 400                             const unsigned char *input,
 401                             unsigned char *output,
 402                             size_t output_max_len );
 403
 404 /**
 405  * \brief          Generic wrapper to perform a PKCS#1 signature using the
 406  *                 mode from the context. Do a private RSA operation to sign
 407  *                 a message digest
 408  *
 409  * \param ctx      RSA context
 410  * \param f_rng    RNG function (Needed for PKCS#1 v2.1 encoding)
 411  * \param p_rng    RNG parameter
 412  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 413  * \param hash_id  SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512}
 414  * \param hashlen  message digest length (for SIG_RSA_RAW only)
 415  * \param hash     buffer holding the message digest
 416  * \param sig      buffer that will hold the ciphertext
 417  *
 418  * \return         0 if the signing operation was successful,
 419  *                 or an POLARSSL_ERR_RSA_XXX error code
 420  *
 421  * \note           The "sig" buffer must be as large as the size
 422  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 423  *
 424  * \note           In case of PKCS#1 v2.1 encoding keep in mind that
 425  *                 the hash_id in the RSA context is the one used for the
 426  *                 encoding. hash_id in the function call is the type of hash
 427  *                 that is encoded. According to RFC 3447 it is advised to
 428  *                 keep both hashes the same.
 429  */
 430 int rsa_pkcs1_sign( rsa_context *ctx,
 431                     int (*f_rng)(void *, unsigned char *, size_t),
 432                     void *p_rng,
 433                     int mode,
 434                     int hash_id,
 435                     unsigned int hashlen,
 436                     const unsigned char *hash,
 437                     unsigned char *sig );
 438
 439 /**
 440  * \brief          Perform a PKCS#1 v1.5 signature (RSASSA-PKCS1-v1_5-SIGN)
 441  *
 442  * \param ctx      RSA context
 443  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 444  * \param hash_id  SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512}
 445  * \param hashlen  message digest length (for SIG_RSA_RAW only)
 446  * \param hash     buffer holding the message digest
 447  * \param sig      buffer that will hold the ciphertext
 448  *
 449  * \return         0 if the signing operation was successful,
 450  *                 or an POLARSSL_ERR_RSA_XXX error code
 451  *
 452  * \note           The "sig" buffer must be as large as the size
 453  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 454  */
 455 int rsa_rsassa_pkcs1_v15_sign( rsa_context *ctx,
 456                                int mode,
 457                                int hash_id,
 458                                unsigned int hashlen,
 459                                const unsigned char *hash,
 460                                unsigned char *sig );
 461
 462 /**
 463  * \brief          Perform a PKCS#1 v2.1 PSS signature (RSASSA-PSS-SIGN)
 464  *
 465  * \param ctx      RSA context
 466  * \param f_rng    RNG function (Needed for PKCS#1 v2.1 encoding)
 467  * \param p_rng    RNG parameter
 468  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 469  * \param hash_id  SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512}
 470  * \param hashlen  message digest length (for SIG_RSA_RAW only)
 471  * \param hash     buffer holding the message digest
 472  * \param sig      buffer that will hold the ciphertext
 473  *
 474  * \return         0 if the signing operation was successful,
 475  *                 or an POLARSSL_ERR_RSA_XXX error code
 476  *
 477  * \note           The "sig" buffer must be as large as the size
 478  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 479  *
 480  * \note           In case of PKCS#1 v2.1 encoding keep in mind that
 481  *                 the hash_id in the RSA context is the one used for the
 482  *                 encoding. hash_id in the function call is the type of hash
 483  *                 that is encoded. According to RFC 3447 it is advised to
 484  *                 keep both hashes the same.
 485  */
 486 int rsa_rsassa_pss_sign( rsa_context *ctx,
 487                          int (*f_rng)(void *, unsigned char *, size_t),
 488                          void *p_rng,
 489                          int mode,
 490                          int hash_id,
 491                          unsigned int hashlen,
 492                          const unsigned char *hash,
 493                          unsigned char *sig );
 494
 495 /**
 496  * \brief          Generic wrapper to perform a PKCS#1 verification using the
 497  *                 mode from the context. Do a public RSA operation and check
 498  *                 the message digest
 499  *
 500  * \param ctx      points to an RSA public key
 501  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 502  * \param hash_id  SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512}
 503  * \param hashlen  message digest length (for SIG_RSA_RAW only)
 504  * \param hash     buffer holding the message digest
 505  * \param sig      buffer holding the ciphertext
 506  *
 507  * \return         0 if the verify operation was successful,
 508  *                 or an POLARSSL_ERR_RSA_XXX error code
 509  *
 510  * \note           The "sig" buffer must be as large as the size
 511  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 512  *
 513  * \note           In case of PKCS#1 v2.1 encoding keep in mind that
 514  *                 the hash_id in the RSA context is the one used for the
 515  *                 verification. hash_id in the function call is the type of hash
 516  *                 that is verified. According to RFC 3447 it is advised to
 517  *                 keep both hashes the same.
 518  */
 519 int rsa_pkcs1_verify( rsa_context *ctx,
 520                       int mode,
 521                       int hash_id,
 522                       unsigned int hashlen,
 523                       const unsigned char *hash,
 524                       unsigned char *sig );
 525
 526 /**
 527  * \brief          Perform a PKCS#1 v1.5 verification (RSASSA-PKCS1-v1_5-VERIFY)
 528  *
 529  * \param ctx      points to an RSA public key
 530  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 531  * \param hash_id  SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512}
 532  * \param hashlen  message digest length (for SIG_RSA_RAW only)
 533  * \param hash     buffer holding the message digest
 534  * \param sig      buffer holding the ciphertext
 535  *
 536  * \return         0 if the verify operation was successful,
 537  *                 or an POLARSSL_ERR_RSA_XXX error code
 538  *
 539  * \note           The "sig" buffer must be as large as the size
 540  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 541  */
 542 int rsa_rsassa_pkcs1_v15_verify( rsa_context *ctx,
 543                                  int mode,
 544                                  int hash_id,
 545                                  unsigned int hashlen,
 546                                  const unsigned char *hash,
 547                                  unsigned char *sig );
 548
 549 /**
 550  * \brief          Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY)
 551  * \brief          Do a public RSA and check the message digest
 552  *
 553  * \param ctx      points to an RSA public key
 554  * \param mode     RSA_PUBLIC or RSA_PRIVATE
 555  * \param hash_id  SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512}
 556  * \param hashlen  message digest length (for SIG_RSA_RAW only)
 557  * \param hash     buffer holding the message digest
 558  * \param sig      buffer holding the ciphertext
 559  *
 560  * \return         0 if the verify operation was successful,
 561  *                 or an POLARSSL_ERR_RSA_XXX error code
 562  *
 563  * \note           The "sig" buffer must be as large as the size
 564  *                 of ctx->N (eg. 128 bytes if RSA-1024 is used).
 565  *
 566  * \note           In case of PKCS#1 v2.1 encoding keep in mind that
 567  *                 the hash_id in the RSA context is the one used for the
 568  *                 verification. hash_id in the function call is the type of hash
 569  *                 that is verified. According to RFC 3447 it is advised to
 570  *                 keep both hashes the same.
 571  */
 572 int rsa_rsassa_pss_verify( rsa_context *ctx,
 573                            int mode,
 574                            int hash_id,
 575                            unsigned int hashlen,
 576                            const unsigned char *hash,
 577                            unsigned char *sig );
 578
 579 /**
 580  * \brief          Free the components of an RSA key
 581  *
 582  * \param ctx      RSA Context to free
 583  */
 584 void rsa_free( rsa_context *ctx );
 585
 586 /**
 587  * \brief          Checkup routine
 588  *
 589  * \return         0 if successful, or 1 if the test failed
 590  */
 591 int rsa_self_test( int verbose );
 592
 593 #ifdef __cplusplus
 594 }
 595 #endif
 596
 597 #endif /* rsa.h */