cvs.zerfleddert.de Git - proxmark3-svn/blob - README.txt

   1 INTRO:
   2
   3 This file contains enough software, logic (for the FPGA), and design
   4 documentation for the hardware that you could, at least in theory,
   5 do something useful with a proxmark3. It has commands to:
   6
   7     * read any kind of 125 kHz unidirectional tag
   8     * simulate any kind of 125 kHz unidirectional tag
   9
  10 (This is enough to perform all of the silly cloning attacks, like the
  11 ones that I did at the Capitol in Sacramento, or anything involving
  12 a Verichip. From a technical standpoint, these are not that exciting,
  13 although the `software radio' architecture of the proxmark3 makes it
  14 easy and fun to support new formats.)
  15
  16 As a bonus, I include some code to use the 13.56 MHz hardware, so you can:
  17
  18     * do anything that a (medium-range) ISO 15693 reader could
  19     * read an ISO 14443 tag, if you know the higher-layer protocol
  20     * pretend to be an ISO 14443 tag, if you know the higher-layer protocol
  21     * snoop on an ISO 14443 transaction
  22
  23 I am not actively developing any of this. I have other projects that
  24 seem to be more useful.
  25
  26 USING THE PACKAGE:
  27
  28 The software tools required to build include:
  29
  30     * cygwin or other unix-like tools for Windows
  31     * the Microsoft Visual C++ compiler (I use Version 6)
  32     * arm-elf-gcc; I use WinterMute's build, from http://www.devkitpro.org/
  33     * Xilinx's WebPack tools
  34     * Modelsim (for test only)
  35     * perl
  36
  37 It is not necessary to build the FPGA image yourself; a pre-compiled
  38 image is provided, as armsrc/fpgaimg.c. This is a generated file,
  39 though, and you can rebuild it by running fpga/go.bat.
  40
  41 Documentation is minimal, but see the doc/ directory for what exists. A
  42 previous familiarity with the ARM, with digital signal processing,
  43 and with embedded programming in general is assumed.
  44
  45 The device is used through a specialized command line interface; for
  46 example, to clone a Verichip, you might type:
  47
  48     loread                          ; this reads the tag, and stores the
  49                                     ; raw samples in memory on the ARM
  50
  51     losamples                       ; then we download the samples to
  52                                     ; the PC
  53
  54     vchdemod clone                  ; demodulate the ID, and then put it
  55                                     ; back in a format that we can replay
  56
  57     losim                           ; and then replay it
  58
  59 To read an ISO 15693 tag, you might type:
  60
  61     hiread                          ; read the tag; this involves sending a
  62                                     ; particular command, and then getting
  63                                     ; the response (which is stored as raw
  64                                     ; samples in memory on the ARM)
  65
  66     hisamples                       ; then download those samples to the PC
  67
  68     hi15demod                       ; and demod them to bits (and check the
  69                                     ; CRC etc. at the same time)
  70
  71 Notice that in both cases the signal processing mostly happened on the PC
  72 side; that is of course not practical for a real reader, but it is easier
  73 to initially write your code and debug on the PC side than on the ARM. As
  74 long as you use integer math (and I do), it's trivial to port it over
  75 when you're done.
  76
  77 The USB driver and bootloader are documented (and available separately
  78 for download, if you wish to use them in another project) at
  79
  80     http://cq.cx/trivia.pl
  81
  82
  83 OBTAINING HARDWARE:
  84
  85 Most of the ultra-low-volume contract assemblers that have sprung up
  86 (Screaming Circuits, the various cheap Asian suppliers, etc.) could put
  87 something like this together with a reasonable yield. A run of around
  88 a dozen units is probably cost-effective. The BOM includes (possibly-
  89 outdated) component pricing, and everything is available from Digikey
  90 and the usual distributors.
  91
  92 If you've never assembled a modern circuit board by hand, then this is
  93 not a good place to start. Some of the components (e.g. the crystals)
  94 must not be assembled with a soldering iron, and require hot air.
  95
  96 The schematics are included; the component values given are not
  97 necessarily correct for all situations, but it should be possible to do
  98 nearly anything you would want with appropriate population options.
  99
 100 The printed circuit board artwork is also available, as Gerbers and an
 101 Excellon drill file.
 102
 103
 104 FUTURE PLANS, ENHANCEMENTS THAT YOU COULD MAKE:
 105
 106 At some point I should write software involving a proper real-time
 107 operating system for the ARM. I would then provide interrupt-driven
 108 drivers for many of the peripherals that are polled now (the USB,
 109 the data stream from the FPGA), which would make it easier to develop
 110 complex applications.
 111
 112 It would not be all that hard to implement the ISO 15693 reader properly
 113 (with anticollision, all the commands supported, and so on)--the signal
 114 processing is already written, so it is all straightforward applications
 115 work.
 116
 117 I have basic support for ISO 14443 as well: a sniffer, a simulated
 118 tag, and a reader. It won't do anything useful unless you fill in the
 119 high-layer protocol.
 120
 121 Nicer (i.e., closer-to-optimal) implementations of all kinds of signal
 122 processing would be useful as well.
 123
 124 A practical implementation of the learning-the-tag's-ID-from-what-the-
 125 reader-broadcasts-during-anticollision attacks would be relatively
 126 straightforward. This would involve some signal processing on the FPGA,
 127 but not much else after that.
 128
 129 It would be neat to write a driver that could stream samples from the A/Ds
 130 over USB to the PC, using the full available bandwidth of USB. I am not
 131 yet sure what that would be good for, but surely something. This would
 132 require a kernel-mode driver under Windows, though, which is more work.
 133
 134
 135 LICENSING:
 136
 137 This program is free software; you can redistribute it and/or modify
 138 it under the terms of the GNU General Public License as published by
 139 the Free Software Foundation; either version 2 of the License, or
 140 (at your option) any later version.
 141
 142 This program is distributed in the hope that it will be useful,
 143 but WITHOUT ANY WARRANTY; without even the implied warranty of
 144 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 145 GNU General Public License for more details.
 146
 147 You should have received a copy of the GNU General Public License
 148 along with this program; if not, write to the Free Software
 149 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 150
 151
 152 Jonathan Westhues
 153 user jwesthues, at host cq.cx
 154
 155 May 2007, Cambridge MA
 156