cvs.zerfleddert.de Git - proxmark3-svn/blob - client/scripts/14araw.lua

   1 local cmds = require('commands')
   2 local getopt = require('getopt')
   3 local lib14a = require('read14a')
   4
   5 example = "script run 14araw -x 6000F57b"
   6 author = "Martin Holst Swende"
   7
   8
   9 desc =
  10 [[
  11 This is a script to allow raw 1444a commands to be sent and received.
  12
  13 Arguments:
  14         -o                              do not connect - use this only if you previously used -p to stay connected
  15         -r                              do not read response
  16         -c                              calculate and append CRC
  17         -p                              stay connected - dont inactivate the field
  18         -x <payload>    Data to send (NO SPACES!)
  19         -d                              Debug flag
  20         -t                              Topaz mode
  21         -3                              Skip ISO14443-4 select
  22
  23 Examples :
  24
  25 # 1. Connect and don't disconnect
  26 script run 14araw -p
  27 # 2. Send mf auth, read response (nonce)
  28 script run 14araw -o -x 6000F57b -p
  29 # 3. disconnect
  30 script run 14araw -o
  31
  32 # All three steps in one go:
  33 script run 14araw -x 6000F57b
  34 ]]
  35
  36 --[[
  37
  38 This script communicates with
  39 /armsrc/iso14443a.c, specifically ReaderIso14443a() at around line 1779 and onwards.
  40
  41 Check there for details about data format and how commands are interpreted on the
  42 device-side.
  43 ]]
  44
  45 -- Some globals
  46 local TIMEOUT = 2000 -- Shouldn't take longer than 2 seconds
  47 local DEBUG = false -- the debug flag
  48
  49 -------------------------------
  50 -- Some utilities
  51 -------------------------------
  52
  53 ---
  54 -- A debug printout-function
  55 function dbg(args)
  56         if DEBUG then
  57                 print("###", args)
  58         end
  59 end
  60 ---
  61 -- This is only meant to be used when errors occur
  62 function oops(err)
  63         print("ERROR: ",err)
  64 end
  65
  66
  67 ---
  68 -- Usage help
  69 function help()
  70         print(desc)
  71         print("Example usage")
  72         print(example)
  73 end
  74
  75
  76 ---
  77 -- The main entry point
  78 function main(args)
  79
  80         if args == nil or #args == 0 then
  81                 return help()
  82         end
  83
  84         local ignore_response = false
  85         local appendcrc = false
  86         local stayconnected = false
  87         local payload = nil
  88         local doconnect = true
  89         local topaz_mode = false
  90         local no_rats = false
  91
  92         -- Read the parameters
  93         for o, a in getopt.getopt(args, 'orcpx:dt3') do
  94                 if o == "o" then doconnect = false end
  95                 if o == "r" then ignore_response = true end
  96                 if o == "c" then appendcrc = true end
  97                 if o == "p" then stayconnected = true end
  98                 if o == "x" then payload = a end
  99                 if o == "d" then DEBUG = true end
 100                 if o == "t" then topaz_mode = true end
 101                 if o == "3" then no_rats = true end
 102         end
 103
 104         -- First of all, connect
 105         if doconnect then
 106                 dbg("doconnect")
 107                 -- We reuse the connect functionality from a
 108                 -- common library
 109                 info, err = lib14a.read14443a(true, no_rats)
 110
 111                 if err then return oops(err) end
 112                 print(("Connected to card, uid = %s"):format(info.uid))
 113         end
 114
 115         -- The actual raw payload, if any
 116         if payload then
 117                 res,err = sendRaw(payload,{ignore_response = ignore_response, topaz_mode = topaz_mode})
 118                 if err then return oops(err) end
 119
 120                 if not ignoreresponse then
 121                         -- Display the returned data
 122                         showdata(res)
 123                 end
 124         end
 125         -- And, perhaps disconnect?
 126         if not stayconnected then
 127                 disconnect()
 128         end
 129 end
 130
 131 --- Picks out and displays the data read from a tag
 132 -- Specifically, takes a usb packet, converts to a Command
 133 -- (as in commands.lua), takes the data-array and
 134 -- reads the number of bytes specified in arg1 (arg0 in c-struct)
 135 -- and displays the data
 136 -- @param usbpacket the data received from the device
 137 function showdata(usbpacket)
 138         local cmd_response = Command.parse(usbpacket)
 139         local len = tonumber(cmd_response.arg1) *2
 140         --print("data length:",len)
 141         local data = string.sub(tostring(cmd_response.data), 0, len);
 142         print("<< ",data)
 143         --print("----------------")
 144 end
 145
 146
 147 function sendRaw(rawdata, options)
 148         print(">> ", rawdata)
 149
 150         local flags = lib14a.ISO14A_COMMAND.ISO14A_NO_DISCONNECT + lib14a.ISO14A_COMMAND.ISO14A_RAW
 151         if options.topaz_mode == true then flags = flags + lib14a.ISO14A_COMMAND.ISO14A_TOPAZMODE end
 152
 153         local command = Command:new{cmd = cmds.CMD_READER_ISO_14443a,
 154                                                                         arg1 = flags, -- Send raw
 155                                                                         -- arg2 contains the length, which is half the length
 156                                                                         -- of the ASCII-string rawdata
 157                                                                         arg2 = string.len(rawdata)/2,
 158                                                                         data = rawdata}
 159         return lib14a.sendToDevice(command, options.ignore_response)
 160 end
 161
 162 -- Sends an instruction to do nothing, only disconnect
 163 function disconnect()
 164
 165         local command = Command:new{cmd = cmds.CMD_READER_ISO_14443a,
 166                                                                         arg1 = 0, -- Nothing
 167                                                                         }
 168         -- We can ignore the response here, no ACK is returned for this command
 169         -- Check /armsrc/iso14443a.c, ReaderIso14443a() for details
 170         return lib14a.sendToDevice(command,true)
 171 end
 172
 173
 174 -------------------------
 175 --      Testing
 176 -------------------------
 177 function selftest()
 178         DEBUG = true
 179         dbg("Performing test")
 180         main()
 181         main("-p")
 182         main(" -o -x 6000F57b -p")
 183         main("-o")
 184         main("-x 6000F57b")
 185         dbg("Tests done")
 186 end
 187 -- Flip the switch here to perform a sanity check.
 188 -- It read a nonce in two different ways, as specified in the usage-section
 189 if "--test"==args then
 190         selftest()
 191 else
 192         -- Call the main
 193         main(args)
 194 end