cvs.zerfleddert.de Git - proxmark3-svn/blob - fpga/fpga.v

   1 //-----------------------------------------------------------------------------
   2 // The FPGA is responsible for interfacing between the A/D, the coil drivers,
   3 // and the ARM. In the low-frequency modes it passes the data straight
   4 // through, so that the ARM gets raw A/D samples over the SSP. In the high-
   5 // frequency modes, the FPGA might perform some demodulation first, to
   6 // reduce the amount of data that we must send to the ARM.
   7 //
   8 // I am not really an FPGA/ASIC designer, so I am sure that a lot of this
   9 // could be improved.
  10 //
  11 // Jonathan Westhues, March 2006
  12 // Added ISO14443-A support by Gerhard de Koning Gans, April 2008
  13 //-----------------------------------------------------------------------------
  14
  15 `include "lo_read.v"
  16 `include "lo_passthru.v"
  17 `include "lo_edge_detect.v"
  18 `include "hi_read_tx.v"
  19 `include "hi_read_rx_xcorr.v"
  20 `include "hi_simulate.v"
  21 `include "hi_iso14443a.v"
  22 `include "util.v"
  23
  24 module fpga(
  25         spcki, miso, mosi, ncs,
  26         pck0i, ck_1356meg, ck_1356megb,
  27         pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
  28         adc_d, adc_clk, adc_noe,
  29         ssp_frame, ssp_din, ssp_dout, ssp_clk,
  30         cross_hi, cross_lo,
  31         dbg
  32 );
  33         input spcki, mosi, ncs;
  34         output miso;
  35         input pck0i, ck_1356meg, ck_1356megb;
  36         output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
  37         input [7:0] adc_d;
  38         output adc_clk, adc_noe;
  39         input ssp_dout;
  40         output ssp_frame, ssp_din, ssp_clk;
  41         input cross_hi, cross_lo;
  42         output dbg;
  43
  44 //assign pck0 = pck0i;
  45         IBUFG #(.IOSTANDARD("DEFAULT") ) pck0b(
  46                 .O(pck0),
  47                 .I(pck0i)
  48         );
  49 //assign spck = spcki;
  50         IBUFG #(.IOSTANDARD("DEFAULT") ) spckb(
  51                 .O(spck),
  52                 .I(spcki)
  53         );
  54 //-----------------------------------------------------------------------------
  55 // The SPI receiver. This sets up the configuration word, which the rest of
  56 // the logic looks at to determine how to connect the A/D and the coil
  57 // drivers (i.e., which section gets it). Also assign some symbolic names
  58 // to the configuration bits, for use below.
  59 //-----------------------------------------------------------------------------
  60
  61 reg [15:0] shift_reg;
  62 reg [7:0] divisor;
  63 reg [7:0] conf_word;
  64
  65 // We switch modes between transmitting to the 13.56 MHz tag and receiving
  66 // from it, which means that we must make sure that we can do so without
  67 // glitching, or else we will glitch the transmitted carrier.
  68 always @(posedge ncs)
  69 begin
  70         case(shift_reg[15:12])
  71                 4'b0001: conf_word <= shift_reg[7:0];
  72                 4'b0010: divisor <= shift_reg[7:0];
  73         endcase
  74 end
  75
  76 always @(posedge spck)
  77 begin
  78         if(~ncs)
  79         begin
  80                 shift_reg[15:1] <= shift_reg[14:0];
  81                 shift_reg[0] <= mosi;
  82         end
  83 end
  84
  85 wire [2:0] major_mode;
  86 assign major_mode = conf_word[7:5];
  87
  88 // For the low-frequency configuration:
  89 wire lo_is_125khz;
  90 assign lo_is_125khz = conf_word[3];
  91
  92 // For the high-frequency transmit configuration: modulation depth, either
  93 // 100% (just quite driving antenna, steady LOW), or shallower (tri-state
  94 // some fraction of the buffers)
  95 wire hi_read_tx_shallow_modulation;
  96 assign hi_read_tx_shallow_modulation = conf_word[0];
  97
  98 // For the high-frequency receive correlator: frequency against which to
  99 // correlate.
 100 wire hi_read_rx_xcorr_848;
 101 assign hi_read_rx_xcorr_848 = conf_word[0];
 102 // and whether to drive the coil (reader) or just short it (snooper)
 103 wire hi_read_rx_xcorr_snoop;
 104 assign hi_read_rx_xcorr_snoop = conf_word[1];
 105
 106 // Divide the expected subcarrier frequency for hi_read_rx_xcorr by 4
 107 wire hi_read_rx_xcorr_quarter;
 108 assign hi_read_rx_xcorr_quarter = conf_word[2];
 109
 110 // For the high-frequency simulated tag: what kind of modulation to use.
 111 wire [2:0] hi_simulate_mod_type;
 112 assign hi_simulate_mod_type = conf_word[2:0];
 113
 114 // For the high-frequency simulated tag: what kind of modulation to use.
 115 wire lf_field;
 116 assign lf_field = conf_word[0];
 117
 118 //-----------------------------------------------------------------------------
 119 // And then we instantiate the modules corresponding to each of the FPGA's
 120 // major modes, and use muxes to connect the outputs of the active mode to
 121 // the output pins.
 122 //-----------------------------------------------------------------------------
 123
 124 lo_read lr(
 125         pck0, ck_1356meg, ck_1356megb,
 126         lr_pwr_lo, lr_pwr_hi, lr_pwr_oe1, lr_pwr_oe2, lr_pwr_oe3, lr_pwr_oe4,
 127         adc_d, lr_adc_clk,
 128         lr_ssp_frame, lr_ssp_din, ssp_dout, lr_ssp_clk,
 129         cross_hi, cross_lo,
 130         lr_dbg,
 131         lo_is_125khz, divisor
 132 );
 133
 134 lo_passthru lp(
 135         pck0, ck_1356meg, ck_1356megb,
 136         lp_pwr_lo, lp_pwr_hi, lp_pwr_oe1, lp_pwr_oe2, lp_pwr_oe3, lp_pwr_oe4,
 137         adc_d, lp_adc_clk,
 138         lp_ssp_frame, lp_ssp_din, ssp_dout, lp_ssp_clk,
 139         cross_hi, cross_lo,
 140         lp_dbg, divisor
 141 );
 142
 143 lo_edge_detect ls(
 144         pck0, ck_1356meg, ck_1356megb,
 145         ls_pwr_lo, ls_pwr_hi, ls_pwr_oe1, ls_pwr_oe2, ls_pwr_oe3, ls_pwr_oe4,
 146         adc_d, ls_adc_clk,
 147         ls_ssp_frame, ls_ssp_din, ssp_dout, ls_ssp_clk,
 148         cross_hi, cross_lo,
 149         ls_dbg, divisor,
 150         lf_field
 151 );
 152
 153 hi_read_tx ht(
 154         pck0, ck_1356meg, ck_1356megb,
 155         ht_pwr_lo, ht_pwr_hi, ht_pwr_oe1, ht_pwr_oe2, ht_pwr_oe3, ht_pwr_oe4,
 156         adc_d, ht_adc_clk,
 157         ht_ssp_frame, ht_ssp_din, ssp_dout, ht_ssp_clk,
 158         cross_hi, cross_lo,
 159         ht_dbg,
 160         hi_read_tx_shallow_modulation
 161 );
 162
 163 hi_read_rx_xcorr hrxc(
 164         pck0, ck_1356meg, ck_1356megb,
 165         hrxc_pwr_lo, hrxc_pwr_hi, hrxc_pwr_oe1, hrxc_pwr_oe2, hrxc_pwr_oe3,     hrxc_pwr_oe4,
 166         adc_d, hrxc_adc_clk,
 167         hrxc_ssp_frame, hrxc_ssp_din, ssp_dout, hrxc_ssp_clk,
 168         cross_hi, cross_lo,
 169         hrxc_dbg,
 170         hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop, hi_read_rx_xcorr_quarter
 171 );
 172
 173 hi_simulate hs(
 174         pck0, ck_1356meg, ck_1356megb,
 175         hs_pwr_lo, hs_pwr_hi, hs_pwr_oe1, hs_pwr_oe2, hs_pwr_oe3, hs_pwr_oe4,
 176         adc_d, hs_adc_clk,
 177         hs_ssp_frame, hs_ssp_din, ssp_dout, hs_ssp_clk,
 178         cross_hi, cross_lo,
 179         hs_dbg,
 180         hi_simulate_mod_type
 181 );
 182
 183 hi_iso14443a hisn(
 184         pck0, ck_1356meg, ck_1356megb,
 185         hisn_pwr_lo, hisn_pwr_hi, hisn_pwr_oe1, hisn_pwr_oe2, hisn_pwr_oe3,     hisn_pwr_oe4,
 186         adc_d, hisn_adc_clk,
 187         hisn_ssp_frame, hisn_ssp_din, ssp_dout, hisn_ssp_clk,
 188         cross_hi, cross_lo,
 189         hisn_dbg,
 190         hi_simulate_mod_type
 191 );
 192
 193 // Major modes:
 194 //   000 --  LF reader (generic)
 195 //   001 --  LF simulated tag (generic)
 196 //   010 --  HF reader, transmitting to tag; modulation depth selectable
 197 //   011 --  HF reader, receiving from tag, correlating as it goes; frequency selectable
 198 //   100 --  HF simulated tag
 199 //   101 --  HF ISO14443-A
 200 //   110 --  LF passthrough
 201 //   111 --  everything off
 202
 203 mux8 mux_ssp_clk                (major_mode, ssp_clk,   lr_ssp_clk,   ls_ssp_clk,   ht_ssp_clk,   hrxc_ssp_clk,   hs_ssp_clk,   hisn_ssp_clk,   lp_ssp_clk,   1'b0);
 204 mux8 mux_ssp_din                (major_mode, ssp_din,   lr_ssp_din,   ls_ssp_din,   ht_ssp_din,   hrxc_ssp_din,   hs_ssp_din,   hisn_ssp_din,   lp_ssp_din,   1'b0);
 205 mux8 mux_ssp_frame      (major_mode, ssp_frame, lr_ssp_frame, ls_ssp_frame, ht_ssp_frame, hrxc_ssp_frame, hs_ssp_frame, hisn_ssp_frame, lp_ssp_frame, 1'b0);
 206 mux8 mux_pwr_oe1                (major_mode, pwr_oe1,   lr_pwr_oe1,   ls_pwr_oe1,   ht_pwr_oe1,   hrxc_pwr_oe1,   hs_pwr_oe1,   hisn_pwr_oe1,   lp_pwr_oe1,   1'b0);
 207 mux8 mux_pwr_oe2                (major_mode, pwr_oe2,   lr_pwr_oe2,   ls_pwr_oe2,   ht_pwr_oe2,   hrxc_pwr_oe2,   hs_pwr_oe2,   hisn_pwr_oe2,   lp_pwr_oe2,   1'b0);
 208 mux8 mux_pwr_oe3                (major_mode, pwr_oe3,   lr_pwr_oe3,   ls_pwr_oe3,   ht_pwr_oe3,   hrxc_pwr_oe3,   hs_pwr_oe3,   hisn_pwr_oe3,   lp_pwr_oe3,   1'b0);
 209 mux8 mux_pwr_oe4                (major_mode, pwr_oe4,   lr_pwr_oe4,   ls_pwr_oe4,   ht_pwr_oe4,   hrxc_pwr_oe4,   hs_pwr_oe4,   hisn_pwr_oe4,   lp_pwr_oe4,   1'b0);
 210 mux8 mux_pwr_lo                 (major_mode, pwr_lo,    lr_pwr_lo,    ls_pwr_lo,    ht_pwr_lo,    hrxc_pwr_lo,    hs_pwr_lo,    hisn_pwr_lo,    lp_pwr_lo,    1'b0);
 211 mux8 mux_pwr_hi                 (major_mode, pwr_hi,    lr_pwr_hi,    ls_pwr_hi,    ht_pwr_hi,    hrxc_pwr_hi,    hs_pwr_hi,    hisn_pwr_hi,    lp_pwr_hi,    1'b0);
 212 mux8 mux_adc_clk                (major_mode, adc_clk,   lr_adc_clk,   ls_adc_clk,   ht_adc_clk,   hrxc_adc_clk,   hs_adc_clk,   hisn_adc_clk,   lp_adc_clk,   1'b0);
 213 mux8 mux_dbg                            (major_mode, dbg,       lr_dbg,       ls_dbg,       ht_dbg,       hrxc_dbg,       hs_dbg,       hisn_dbg,       lp_dbg,       1'b0);
 214
 215 // In all modes, let the ADC's outputs be enabled.
 216 assign adc_noe = 1'b0;
 217
 218 endmodule