cvs.zerfleddert.de Git - proxmark3-svn/blob - tools/at91sam7s512-busblaster.cfg

   1 ## General OpenOCD configuration
   2 # Ports
   3 telnet_port 4444
   4 gdb_port 3333
   5
   6 ## Interface configuration section
   7 # Interface
   8
   9 # you can use
  10 #source [find interface/ftdi/dp_busblaster.cfg]
  11 # or
  12
  13 interface ftdi
  14 ftdi_device_desc "Dual RS232-HS"
  15 ftdi_vid_pid 0x0403 0x6010
  16
  17 ftdi_layout_init 0x0c08 0x0f1b
  18 ftdi_layout_signal nTRST -data 0x0100 -noe 0x0400
  19 ftdi_layout_signal nSRST -data 0x0200 -noe 0x0800
  20
  21 adapter_khz 1000
  22
  23 ## Chipset configuration section
  24 # use combined on interfaces or targets that can't set TRST/SRST separately
  25 reset_config srst_only srst_pulls_trst
  26
  27 jtag newtap sam7x cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
  28
  29 target create sam7x.cpu arm7tdmi -endian little -chain-position sam7x.cpu
  30
  31 sam7x.cpu configure -event reset-init {
  32     soft_reset_halt
  33     mww 0xfffffd00 0xa5000004   # RSTC_CR: Reset peripherals
  34     mww 0xfffffd44 0x00008000   # WDT_MR: disable watchdog
  35     mww 0xfffffd08 0xa5000001   # RSTC_MR enable user reset
  36     mww 0xfffffc20 0x00005001   # CKGR_MOR : enable the main oscillator
  37     sleep 10
  38     mww 0xfffffc2c 0x000b1c02   # CKGR_PLLR: 16MHz * 12/2 = 96MHz
  39     sleep 10
  40     mww 0xfffffc30 0x00000007   # PMC_MCKR : MCK = PLL / 2 = 48 MHz
  41     sleep 10
  42     mww 0xffffff60 0x00480100   # MC_FMR: flash mode (FWS=1,FMCN=72)
  43     sleep 100
  44
  45 }
  46
  47 # GDB can also flash my flash!
  48 gdb_memory_map enable
  49 gdb_breakpoint_override hard
  50 #armv4_5 core_state arm
  51
  52 sam7x.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
  53 flash bank sam7x512.flash.0 at91sam7 0 0 0 0 sam7x.cpu 0 0 0 0 0 0 0 18432
  54 flash bank sam7x512.flash.1 at91sam7 0 0 0 0 sam7x.cpu 1 0 0 0 0 0 0 18432