cvs.zerfleddert.de Git - proxmark3-svn/blob - armsrc/Makefile.linux

   1 # This makefile needs to be edited to reflect the location
   2 # of your own arm-elf-gcc toolchain (ARMLIB variable)
   3
   4 CC      = arm-elf-gcc
   5 AS      = arm-elf-as
   6 LD      = arm-elf-ld
   7 OBJCOPY = arm-elf-objcopy
   8
   9 # Indicate where your gnuarm toolchain libgcc.a interworking library is located
  10 # or set $ARMLIB in your environment:
  11 #ARMLIB = /usr/local/lib/gcc/arm-elf/4.3.3/interwork
  12
  13
  14 # Add -DWITH_LCD to EXTRA_CFLAGS if you want support for LCD
  15 # in your firmware (add OBJLCD to OBJ too!)
  16 #EXTRA_CFLAGS = -DWITH_LCD
  17 EXTRA_CFLAGS =
  18
  19 ### You should not need to edit below this line
  20
  21 INCLUDE = -I../include
  22 INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h apps.h
  23 CFLAGS_COMMON = -O6 -c $(INCLUDE) -Wall  -mthumb-interwork
  24 CFLAGS  = $(CFLAGS_COMMON) $(EXTRA_CFLAGS) -mthumb
  25
  26
  27 OBJDIR = obj
  28
  29 OBJLCD = $(OBJDIR)/LCD.o\
  30                  $(OBJDIR)/fonts.o
  31
  32 OBJ =   $(OBJDIR)/start.o \
  33                 $(OBJDIR)/appmain.o \
  34                 $(OBJDIR)/fpga.o \
  35                 $(OBJDIR)/lfops.o \
  36                 $(OBJDIR)/iso15693.o \
  37                 $(OBJDIR)/util.o
  38
  39 # To be compiled in ARM mode, not thumb mode: larger but faster
  40 # Alleviates the 'blew circular buffer' issues somehow...
  41 OBJFAST = $(OBJDIR)/iso14443.o \
  42                   $(OBJDIR)/iso14443a.o
  43
  44 OBJFPGA =       $(OBJDIR)/fpgaimg.o
  45
  46 OBJCOMMON =     $(OBJDIR)/usb.o
  47
  48 all: osimage.s19 fpgaimage.s19 fullimage.s19
  49
  50 fpgaimage.s19: $(OBJFPGA)
  51         @echo fpgaimage.s19
  52         $(LD) -g -Tldscript-fpga -o $(OBJDIR)/fpgaimage.elf $^
  53         $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fpgaimage.elf fpgaimage.s19
  54
  55 osimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON)
  56         @echo osimage.s19
  57         $(LD) -g -Tldscript -o $(OBJDIR)/osimage.elf -Map=osimage.map $^ $(ARMLIB)/libgcc.a
  58         $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/osimage.elf osimage.s19
  59
  60 fullimage.s19: $(OBJ) $(OBJFAST) $(OBJCOMMON) $(OBJFAST) $(OBJFPGA)
  61         @echo fullimage.s19
  62         $(LD) -g -Tldscript-full -o $(OBJDIR)/fullimage.elf $^  $(ARMLIB)/libgcc.a
  63         $(OBJCOPY) -Osrec --srec-forceS3 $(OBJDIR)/fullimage.elf fullimage.s19
  64
  65 # Directives to put the *.o in the OBJDIR directory:
  66 $(OBJ): $(OBJDIR)/%.o : %.c
  67         $(CC) $(CFLAGS) $< -o $@
  68
  69 $(OBJFPGA): $(OBJDIR)/%.o : %.c
  70         $(CC) $(CFLAGS) $< -o $@
  71
  72 $(OBJFAST): $(OBJDIR)/%.o : %.c
  73         $(CC) $(CFLAGS_COMMON) $< -o $@
  74
  75 $(OBJCOMMON): $(OBJDIR)/%.o : ../common/%.c
  76         $(CC) $(CFLAGS) $< -o $@
  77
  78 flash-both: flash flash-fpga
  79
  80 flash-fpga: fpgaimage.s19
  81         ../linux/flasher fpga fpgaimage.s19
  82
  83 flash: osimage.s19
  84         ../linux/flasher os osimage.s19
  85
  86 # Those do not work on the current firmware !
  87 jtag-flash-full: fullimage.s19
  88         ../../OpenOCD/openocd -c "halt; flash write_image fullimage.s19 0x00100000; halt; reset; resume; poll; exit"
  89
  90 jtag-flash-fpga: fpgaimage.s19
  91         ../../OpenOCD/openocd -c "halt; flash write_image fpgaimage.s19 0x00100000; halt; reset; resume; poll; exit"
  92
  93 jtag-flash: osimage.s19
  94         ../../OpenOCD/openocd -c "halt; flash write_image osimage.s19 0x00100000; halt; reset; resume; poll; exit"
  95
  96 clean:
  97         rm -f $(OBJDIR)/*.o $(OBJDIR)/*.elf *.s19 osimage.map
  98
  99 .PHONY: all clean